Selection parameters in report RFUSVS14
Hi gurus.
Im trying to modify report RFUSVS14 for new legal requirement.
When i go to the seletion parameters i dont find some of them that should be there.
For example
BLDAT_IC Document Date(Incoming)
BUDAT_IC Posting Date(Incoming)
TCOD_AG Tax Code(Special Regime Agr)
TCOD_CM Tax Code(Ceuta and Melilla)
TCOD_INS Tax Code(Insurance)
TCOD_RW Tax Code(Renting)
Do you know how can generete them?
Thnaks in advanced
Hi Shiv,
Thanks for reply,
The problem is,
There are chances that user may enter as : NewUser
Inside pgm its becoming NEWUSER. If i do Lowercase on it, it becomes newuser.
But actually i need NewUser.
Is there any way?
Thanks,
Similar Messages
-
Print selection parameters en reports, lists
Hi gurus,
We need print reports, lists with selection parameters used in execution. For example, transaction VCUST. In this moment, system only prints the table with values.
Any idea???
Thank you!!!
I will reward points all answers!Hi daniel
May be these inputs will help you
SP01 - To generate the spool request
SPAD - Where Print parameters are set (here you can include network printer into SAP system)
VSHP1 - to maintain print parameters
Regards
Srinath -
Drill-Down Report Printing Problem for Selection Parameters
Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
PHello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P -
BI: Virtual Provider for ECC Report with same selection parameters
Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand -
How to give Selection Parameters text in Standard SAP reports?
Hi,
I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen.
But I am not able to give text to the selection parameters.
I checked with Modification overview, its not allowing me to put text to custom Selection screen parameters.
Regards
Mohinder Singh ChauhanHi Friends,
I had created a dynamic selection text for a select-option created using Implicit Enhancements.
The select-option field is for MARA-MTART and the dynamic text i had given in the code is "Material Type".
But my client wants it to refer to the data dictionary reference so that it will print the labels given there and especially in the logon language.
Generally it can be done by selecting the checkbox next to the select-option, available in the Text Elements/Selection Texts Screen of the ABAP Editor.
So how to check that box(i.e., how to refer the data dictionary reference) dynamically? -
Executing Report Painter Report in Loop With Different Selection Parameters
Hello all,
I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
Has someone an idea how to to this work in an automatic loop.
Thanks.HI,
My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
Regards -
GR55 Report Selection Parameters
Hi,
I want to add company code as one of the selection parameters. When I run the report group company code is not showing up as the selection parameter.
Please let me know if someone knows how to do that.
ThanksGR52 enter the report group name. Click on Report.
If it is an SAP standard report, you won't be permitted to change. However you can copy that standard report to your own report (give a name to it).
Then, in GRR2, you can call the characteristics under the Edit>general data selection and include the company code.
Click on the second check box, meant for variable. Choose one from the drop down. Select a default company code variable (e.g 8A-bukrs for profit center related report under table GLPCT) for the table you are dealing with . Save and generate. and then include the report under a report group to run. -
Parameters and report on the same page
I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
RekSounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet -
How to get the selection parameters from logical database into one of the t
Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
BasuHi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter -
Creating Selection screen in Report Painter
Good day everyone,
Does anyone know how I could create a selection screen in Report Writer? Thanks!
>Christian<Hi,
Simple Parameters or Selec-options statements will suffice.
Eg : Parameters : p_matnr type mara-matnr.
select-options : s_matnr for mara-matnr.
In selection screen, you may have selec-options, parameters, check boxes, radio buttons etc.
Regards,
Sujatha. -
Modification on selection screen of report
Hello guys,
I have a requirement where in i need to modify the initial selection screen as per clients requirement. The scenario is as follows:
Suppose 'EMPLOYEE' and 'PORTFOLIO' are two of the fields of a cube on which the report will be run. Now suppose there are three employees as A, B and C and A handles portfolios X & Y, B handles portfolios W & Y while C handles portfolios X & Z.
The initial selection screen of report will have two selection fields first as the employee and second as the portfolio.
When we do F4 at employee it will display A, B and C. Now the requirement is if we F4 at portfolio it should display only the relevant one for that employee.
For example: if i give employee as A and when i do F4 at portfolio screen it should give me only X and Y and not all the portfolios viz. W, X, Y & Z
Is there a way to achieve the above scenario????Hi Chakradhar,
Refer this code :
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
SELECTION-SCREEN END OF BLOCK BL2.
AT SELECTION-SCREEN OUTPUT.
CALL SCREEN 100.
when user will click on this radio button , a pop up screen will appear dynamically.
Reward points if helpful.
Regards,
Hemant -
Changing generic selection parameters for Payment advice notes
Hi,
I want to add few more generic selection parameters for Automatic Payment advice notes generation on the seletion screen(f110 - rffoavis_fpaym). Please let me know the config settings for doing this.Hi Pradeep,
you can change the sender, when you change the system-field SY-UNAME before calling FM SO_NEW_DOCUMENT_ATT_SEND_API1.
REPORT Z_TEST_SEND_MAIL.
h_uname must be a SAP-UserId.
sy-uname = h_uname.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
I tried it and it was successfull. -
BOXI 3.0 Selecting "parameters" when rescheduling returns error in InfoView
All,
Fresh installation of BOXI 3.0 and application of FP2. SQL Server Express 2005 BOXI database. Default TomCat web.
Installation had no problems. Used the import wizard to import a couple of reports from previous BOXIR1 system.
I go into InfoView and "schedule" a report. I set the parameters (static, from a combobox) etc... the report runs fine. I can open the report. Everything seems normal and functional to this point.
Then I select the report again, and opt to "reschedule" from the list of actions. This opens the "Instance Title" screen as it should. However, when I then select "parameters" I get the following error :
"An error has occurred: $Proxy4"
This is our second installation of BOXI 3.0 - the first acted the same but resulted in a $Proxy5 error.
What does this mean?
Thanks!
RobADAPT01113079
In Infoview schedule the report to pdf format, and once it goes to success.
Click on the reschedule option and then click on the parameter option.
The error "An error has occurred:$Proxy4" will be thrown.
Target Fix: XI 3.0 FP1
Workaround: No
There was a bug in 3.0 that was fixed in FP1 that seems to match your symptoms. You can try installing FP1. If that doesn't resolve then I'd suggest openinjg a message with support so they can verify your workflow.
Regards,
Tim -
How to create multiple selection screens in reports
How to create multiple selection screens in reports
Thanks,
SridharEx: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10. -
FM to display Selection screen on report output??
Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!!
Maybe you are looking for
-
How to read card reader (bar code reader) in simple java program ?
hai all how to manipulate (read/write) card readers (or bar code reader ) in a java program ? should i import any particular package library ? pls give me any sample code or tutorials or tools, etc (whatever you have) . i am new to this card reader c
-
I have just bought an iBook G4 and need to know can I install iWorks 09?
SOS Helpppppppp I have just purchased iBook G4 and really need to have iWorks on this machine, can I install iWorks09 on it??? plus any handy tips for the iBook would be much appreciated. Thanks in advance
-
TPM Software included from Infineon in the Install Driver App
Hi, I discovered that the software necessary to activate the TPM module with its features, was not pre-installed and ready to use as a "program", onto my Portege under Programs, but, it was available for me when I looked in the All Programs - Toshiba
-
Weblogic Server StartupClass forbidden to do anything?
Hi, Running on WLS 5.1.0 (sp2) on Solaris I've just implemented a StartupClass that WLS doesn't like: Wed Aug 16 18:12:26 CDT 2000:<I> <WebLogicServer> Invoking T3StartupDef tsStartup ccc.edrPrototype.service.TestServiceStartup with {} Wed Aug 16 18:
-
Getting the position of a string???!! HELP
Hi, Does anyone know how to get the beginning and ending position of a string in a JTextPane of in a document??