Selection problem of Ref op set while converting plnd to prod order

Hi PP Professionals,
Even though we have maintained 'manual slection (4)'  for Tast list type- S (ref operation set), we are getting error  'Ref Op set is not valid' and in error help 'error in reading PP master data'.
Since the Routing is same for all the finished products, we want to assign Ref Op Set directly while creating production order.
We have already maintained parameters in 'order-type dependant parameters' and in 'task list selections's default and automatic selection'
Regards,

Hi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards,

Similar Messages

  • Open qty errin Selection list For Ref Doc. screen while converting to order

    Hi SAP Gurus,
    For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
    Can you please help me?
    Thanks,
    Ketan

    Hi Senthilkumar,
    I really appreciate for your kind Hint of SEL ID.
    I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
    Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
    Regards,

  • Insert Ref Operation Set when routing already in Prod Order

    Dear exeperts,
    Is is possible to insert a Ref Operation Set after a routing has been inserted in a prod order? I am getting the error Message no. CO892 which I can't resolve. I know for service orders there is not such constraint.
    Thanks in advance to share your wisdom!
    Francois P.
    Ref. operation set 50000148 is not valid according to the selection conditions
    Check why the reference operation set does not meet the selection conditions:
    1. Is it valid on 2010/07/16?                   OK
    2. Is lot size  within its validity area?     OK
    3. Is the selection ID for routing selection (Customizing: order type- dependent parameters) of a type that allows reference operation sets to be selected?              OK parameter routing selection = 5
    4. If the reference operation set has a change number, is it valid for production on 2010/07/16? OK

    All right, just found what I was missing: a record in config OPEB.
    BR,
    FP

  • Order type is not picking while converison Plnd to process order

    Dear Dudes,
    i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
    thanks in advance.

    Robert,
    Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
    I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
    Regards,
    Prasobh

  • MD04 calling CO40 to convert PLOR to Prod Order Problem

    Hi,
    I have the following Problem,
    When converting Planned Orders to Production Orders in MD04 and calling C040 this does not take account of my BOM status which is set to block, but if I create a Production Order directly in CO01 the BOM status is referenced and the creation of the Production order is denied but this does not happen with MD04 calling CO01.
    I have searched OSS and found Note 453755 which is the exact problem I am having, but the note only refers to version 4.6c however we are on 4.7.
    Anyone have similar problems please let me know how you resolved it.
    Thanks

    Pls. check whether same Alternative BOM is used
    1) While Directly using CO01 &
    2) While calling CO40 from MD04
    It might possible that one Alternate BOM have 'Deletion Flag' and another doesn't have.

  • No prod.order created after setting creation flag in APO

    Hi all,
    I'm encountering a new problem. I created a material, and some data adjacent to it (planned order, prod. order, planned ind. rep., various stocks, a routing and various BOMs) in ECC 6.0, which I successfully CIF-fed to APO 5.0.
    When I modify the quantity of the prod. order in the prod.view in APO everthing works out just fine, i.e. the modification is taken over in ECC, BUT when I set the conversion flag in order to create a production order in ECC triggered from APO... absolutely nothing happens.
    I get no error-message (only planning result successfully saved). When I try to remove the conv. flag again, the system says that it's not possible.
    Any ideas what could be the problem?
    Thanks in advance!
    Regards, Bobby

    Hi y'all,
    as an add-on-information to the previously written:
    if a planned order exists in R/3 and is CIF-fed afterwards the conversion works fine (i.e. the planned ord. is converted to a prod. order in R/3 and the prod.ord.number is made known to APO).
    In case the production order has yet to be created, the whole process is stuck!
    Anybody help, please!
    Regards,
    Bobby

  • I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert apdf file for msword?

    I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert a PDF file for ms word?

    Adobe Reader is free; but you may have paid for the ExportPDF service.
    Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
    [topic moved to ExportPDF forum]

  • Problem while Converting TiFF to PDF using OCR

    Hi,
    We have installed Adobe LiveCycle8.2 PDF Generator ES trail version, Acrobat Pro Extended 9.0.
    OS: Windows XP Service Pack3,
    App Server: WebSphere 6.1.0.19
    DB: SQL Server 2005 SP2.
    We are getting following error while converting TIFF images to PDF Using OCR.
    Error message on AdminUI screen:
    "Error Code:1000
    Error Message: ALC-PDG-001-000-Conversion failed because of an exception. Connection to failed service."
    Error messages in server log file:
    [10/10/08 18:16:50:015 IST] 00000043 ProcessResour W com.adobe.service.ProcessResource$ErrorReaderThread run BMC024: Service Native2PDFSvc: Process ProcessResource(name=pdfgen.exe,pid=0) terminated abnormally with error code {3}
    [10/10/08 18:16:50:218 IST] 00000035 ProcessResour A com.adobe.service.ProcessResource startProcess BMC505: Service Native2PDFSvc: Starting native process with command line "C:\\Program Files\\ibm\\WebSphere\\AppServer1\\profiles\\AppSrv01\\installedApps\\HDDLGSDMNK8897Node0 1Cell\\adobe\\server1\\Native2PDFSvc\\bin\\dll\\pdfgen.exe" PDF-NAf6c310002 -beginExecutable "C:\\Program Files\\IBM\\WebSphere\\AppServer1\\java\\jre\\bin\\javaw.exe" -endExecutable -Xmx64m -cp "C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-appmon.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-appmondata.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-bslj.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-csa.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-generatepdf-client.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-pdfg-common-jaxb.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-pdfg-common.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-pdfg-commonbmc.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-pdfg-idl-bmc-websphere.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-pdfg-idl-bmc.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/adobe-utilities.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/avalon-framework-4.1.5.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/comfyj-2.4.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/jacorb.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/jaxb-api.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/jaxb-impl.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/jaxb-libs.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Cell/a dobe/server1/Native2PDFSvc/bin/jniw2.9.5_acrobat1.1.jar;C:/Program Files/ibm/WebSphere/AppServer1/profiles/AppSrv01/installedApps/HDDLGSDMNK8897Node01Ce

    Error message continuation:
    [10/10/08 18:16:50:296 IST] 00000044 SystemOut O Command line '"C:\Program Files\IBM\WebSphere\AppServer1\java\jre\bin\javaw.exe"'
    [10/10/08 18:16:50:437 IST] 00000035 ExceptionUtil E CNTR0020E: EJB threw an unexpected (non-declared) exception during invocation of method "doRequiresNew" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionBMTAdapter, null)". Exception data: java.lang.IllegalStateException: Connection to failed service.
    at com.adobe.service.ResourcePooler.allocateResource(ResourcePooler.java:87)
    at com.adobe.service.ConnectionFactoryManagerPeer.getConnectionResourceFromPool(ConnectionFa ctoryManagerPeer.java:79)
    at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactor yManagerPeerImpl.java:84)
    at com.adobe.service.ConnectionFactoryRmiAdapter.getConnection(ConnectionFactoryRmiAdapter.j ava:53)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:615)
    at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:727)
    at java.security.AccessController.doPrivileged(AccessController.java:241)
    at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:725)
    at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1123)
    at $Proxy80.getConnection(Unknown Source)
    at com.adobe.service._ConnectionFactoryRemote_Stub.getConnection(_ConnectionFactoryRemote_St ub.java:58)
    at com.adobe.pdfg.callbacks.NativeToPDFTransactionCallback.convertToPdf(NativeToPDFTransacti onCallback.java:185)
    at com.adobe.pdfg.callbacks.NativeToPDFTransactionCallback.doInTransaction(NativeToPDFTransa ctionCallback.java:163)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.pdfg.BMCCaller.invokeInSMT(BMCCaller.java:769)
    at com.adobe.pdfg.Native2PdfCaller.callNativeBMC(Native2PdfCaller.java:779)
    at com.adobe.pdfg.Native2PdfCaller.createPDF(Native2PdfCaller.java:298)
    at com.adobe.pdfg.GeneratePDFImpl.createPDFCommon(GeneratePDFImpl.java:342)
    at com.adobe.pdfg.GeneratePDFImpl.createPDF(GeneratePDFImpl.java:172)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:615)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:102)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:91)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 5)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    at com.adobe.aes.web.create.CreatePDFAct.createPDF(CreatePDFAct.java:383)
    at com.adobe.aes.web.create.CreatePDFAct.createPDF2(CreatePDFAct.java:402)
    at com.adobe.aes.web.create.CreatePDFAct.execute(CreatePDFAct.java:174)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at com.adobe.aes.web.AesActionServlet.service(AesActionServlet.java:63)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1095)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1036)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
    at com.adobe.idp.um.auth.filter.AuthenticationFilter.doFilter(AuthenticationFilter.java:154)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:832)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:565)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
    at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
    at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
    at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1461)
    at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:118)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:458)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:387)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
    at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)

  • Problem while converting smartform out to PDF.

    Hi,
    I have an issue while converting smartform output to PDF. After converting samrtform out to PDF, apostrophe(') is appearing as # in the pdf file. For example the word Indian's is getting printed as Indian#s. I'm using Helvetica font for printing this text.
    How ever print preview is coming fine.
    Could anybody provide me some inputs to solve this.
    Thanks,
    Rick.

    I'm using FM: CONVERT_OTF
    CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          format                = 'PDF'
        IMPORTING
          bin_filesize          = lv_filesize
        TABLES
          otf                   = ls_job_info-otfdata
          lines                 = lt_pdf_table
        EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          err_bad_otf           = 4
          OTHERS                = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

  • Problem while converting pr from mrp to po

    hi friends,
                     I had sales order.Based on sales order, I had run MRP. Pr was created.While converting from pr to po, It is asking for GL Account for that Sales order. So how to proceed further. PLease reply........

    you should ask the FI guy that which account should be used for this purpose becuase if auto determination of G/L is not defined and you are creating the PR for a/c category for sales order

  • Having problem while converting pdf to tiff

    Hi,
    I am using adobe live cycle.I tried to convert one editable pdf file to tiff file. It was giving me an exception which seems i cant convert editable pdf file to tiff file. So first i converted editable pdf to non editable pdf and then converted the non editable pdf to tiff file. Then it is working fine. but while converting editable pdf to non editable pdf,barcode has been erased so in tiff also i am not getting the barcode. Please give me solution for this. It is a bit urgent.
    The exception stack is below
    [Long, long content removed by forum host, please repost in the proper forum. Thank you.]
    Thanks,
    Amit

    Yikes.
    Amit...
    Please navigate to the main Adobe Forums list and find the correct product forum to repost your question.
    This area is for comments and discussion about the operation of the forums themselves. No product questions are discussed here.
    Thanks!

  • "Error occurred while converting the file 'song name'. The required disk cannot be found"

    Hi, I saw this issue in an archived discussion, and I just had the same problem, but figured out how to resolve it.
    I think this error is a result of:
    A) downloading a new version of iTunes, and;
    B) storing my iTunes library on an external hard drive.
    Because when the new version of iTunes was downloaded, I found that the destination folder for my iTunes music was no longer selected. Therefore, I was getting the error message: "Error occurred while converting the file 'song name'. The required disk cannot be found" when I tried to import CDs.
    To fix: go to:
    iTunes>Preferences>Advanced
    and specify your destination folder for your music.
    Just wanted to share!

    Thank you so much! I was in the same situation (iTunes library stored on external hard disk). Strangely, iTunes knew where my music was stored (i.e. if I clicked a song it would link to the library location and play with no problems). But in the "Advanced" settings, the location of my iTunes Library was blank. So I just pointed to the correct location and now everything is working OK! Thanks again.

  • Getting error while converting xml to xsd

    I am getting error"The table (citeinfo) cannot be the child table to itself in nested relations"
    at "http://www.flame-ware.com/products/xml-2-xsd/Default.aspx", while converting
    xml into xsd so i can register.
    Wherever citeinfo is there it is giving error.
    Please look at bold and suggest solution
    thank you
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE metadata SYSTEM "http://www.fgdc.gov/metadata/fgdc-std-001-1998.dtd">
    <metadata>
    <idinfo>
    <citation>
    *<citeinfo>(1)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>One</sername>
    <issue>One</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *<citeinfo>(2)*<pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>One</sername>
    <issue>One</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(2)*</lworkcit>
    *</citeinfo>(1)*</citation>
    <descript>
    <abstract>Easement</abstract>
    <purpose>E911 System</purpose>
    <supplinf>None</supplinf>
    </descript>
    <timeperd>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    <current>publication date</current>
    </timeperd>
    <status>
    <progress>Complete</progress>
    <update>As needed</update>
    </status>
    <spdom>
    <bounding>
    <westbc>
    -122.339</westbc>
    <eastbc>
    -121.0716</eastbc>
    <northbc>
    37.4900</northbc>
    <southbc>
    36.9086</southbc>
    </bounding>
    </spdom>
    <keywords>
    <theme>
    <themekt>Easement</themekt>
    <themekey>Easement</themekey>
    </theme>
    <place>
    <placekt>San Jose</placekt>
    <placekey>San Jose</placekey>
    </place>
    <stratum>
    <stratkt>None</stratkt>
    <stratkey>None</stratkey>
    </stratum>
    <temporal>
    <tempkt>None</tempkt>
    <tempkey>None</tempkey>
    </temporal>
    </keywords>
    <accconst>None</accconst>
    <useconst>None</useconst>
    <ptcontac>
    <cntinfo>
    <cntperp>
    <cntper>Earl Harris</cntper>
    <cntorg>City of San Jose</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>Actual Address</addrtype>
    <address>801 N 1 ST</address>
    <city>San Jose</city>
    <state>CA</state>
    <postal>90000</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>408.277.5626</cntvoice>
    <cnttdd>408.277.5626</cnttdd>
    <cntfax>408.298.8382</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>9-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </ptcontac>
    <browse>
    <browsen>None</browsen>
    <browsed>None</browsed>
    <browset>None</browset>
    </browse>
    <datacred>Unknown</datacred>
    <secinfo>
    <secsys>FGDC</secsys>
    <secclass>Confidential</secclass>
    <sechandl>Confidential Information</sechandl>
    </secinfo>
    <native>Microsoft Windows NT Version 4.0 (Build 1381) Service Pack 6; ESRI ArcCatalog 8.3.0.800</native>
    <crossref>
    *<citeinfo>(3)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *<citeinfo>(*4)
    <origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(*3)
    </lworkcit>
    *</citeinfo*>(4)
    </crossref>
    </idinfo>
    <dataqual>
    <attracc>
    <attraccr>All the related attributes are populated 100%.</attraccr>
    <qattracc>
    <attraccv>100%</attraccv>
    <attracce>All the related attributes are populated 100%.</attracce>
    </qattracc>
    </attracc>
    <logic>100% adjusted,modified and captured easements.</logic>
    <complete>100%</complete>
    <posacc>
    <horizpa>
    <horizpar>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpar>
    <qhorizpa>
    <horizpav>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpav>
    <horizpae>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpae>
    </qhorizpa>
    </horizpa>
    <vertacc>
    <vertaccr>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccr>
    <qvertpa>
    <vertaccv>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccv>
    <vertacce>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertacce>
    </qvertpa>
    </vertacc>
    </posacc>
    <lineage>
    <srcinfo>
    <srccite>
    <*citeinfo>(5)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *</citeinfo>(5*)*<citeinfo>(6)*
    <origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(5)*
    </lworkcit>
    *</citeinfo>(6)*
    </srccite>
    <srcscale>24000</srcscale>
    <typesrc>FTP</typesrc>
    <srctime>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    <srccurr>publication date</srccurr>
    </srctime>
    <srccitea>Unknown</srccitea>
    <srccontr>MGE dgn contains easement data.</srccontr>
    </srcinfo>
    <procstep>
    <procdesc>Easement data is reprojected from NAD27 to NAD83.
    Further it is adjusted as per the spatial alignment shown in MGE input dgn.</procdesc>
    <srcused>Easement</srcused>
    <procdate>20040512</procdate>
    <proctime>09000000</proctime>
    <srcprod>BAS_EASEMENT</srcprod>
    <proccont>
    <cntinfo>
    <cntperp>
    <cntper>Mahesh P Choudhury</cntper>
    <cntorg>Rolta International Inc.</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>mailing address</addrtype>
    <address>5865 North Point Parkway</address>
    <city>Alpharetta</city>
    <state>GA</state>
    <postal>30022</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>678.942.5015</cntvoice>
    <cnttdd>678.942.5015</cnttdd>
    <cntfax>678.942.5001</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>8-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </proccont>
    </procstep>
    </lineage>
    <cloud>Unknown</cloud>
    </dataqual>
    <spdoinfo>
    <indspref>unknown</indspref>
    <direct>Vector</direct>
    <ptvctinf>
    <sdtsterm>
    <sdtstype>String</sdtstype>
    <ptvctcnt>2203</ptvctcnt>
    </sdtsterm>
    </ptvctinf>
    </spdoinfo>
    <spref>
    <horizsys>
    <geograph>
    <latres>5.5</latres>
    <longres>5.5</longres>
    <geogunit>Decimal degrees</geogunit>
    </geograph>
    <geodetic>
    <horizdn>North American Datum of 1983</horizdn>
    <ellips>Geodetic Reference System 80</ellips>
    <semiaxis>1</semiaxis>
    <denflat>2</denflat>
    </geodetic>
    </horizsys>
    <vertdef>
    <altsys>
    <altdatum>North American Vertical Datum of 1988</altdatum>
    <altres>0.002</altres>
    <altunits>sf</altunits>
    <altenc>Attribute values</altenc>
    </altsys>
    <depthsys>
    </depthsys>
    </vertdef>
    </spref>
    <eainfo>
    <detailed>
    <enttyp>
    <enttypl>
    BAS_EASEMENT</enttypl>
    <enttypd>Contains geometry and attributes for easement segments</enttypd>
    <enttypds>Data Model Dictionary</enttypds>
    </enttyp>
    <attr>
    <attrlabl>BAS_EASEMENT_ID</attrlabl>
    <attrdef>Migrated from STREET table ID column. After all the existing IDs have been migrated, assign ID #70,001 onwards for the new easement (or what ever # is available sequentially using, street centerline #) ID's.</attrdef>
    <attrdefs>ESRI</attrdefs>
    <attrdomv>
    <udom>Sequential unique whole numbers that are automatically generated.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>SURVEY_LENGTH</attrlabl>
    <attrdef>Actual length of easement (international foot).This DOES take into account the State Plane Coordinate System.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Surveyed segment length</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>ROW_WIDTH</attrlabl>
    <attrdef>Width of right-of-way (international feet)</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Right-of-way width</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated from ROW files</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>FROM_EASEMENT_ID</attrlabl>
    <attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an easement to which FROM side of this easement is connected.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>FROM_STREET_ID</attrlabl>
    <attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an street segment to which FROM side of this easement is connected.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>TO_EASEMENT_ID</attrlabl>
    <attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an easement to which TO side of this easement is closely located.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>TO_STREET_ID</attrlabl>
    <attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an street segment to which TO side of this easement is closely located.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PROCESSING_STATUS_ID</attrlabl>
    <attrdef>ID of the status/result of last run batch job.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Migrated from PLAN_1 in MGE tables and GIS_TRACKING.MDB Access Database</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MUNICIPALITY_NAME</attrlabl>
    <attrdef>Name of municipality in which the easement primarily resides.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>MUNICIPALITY_NAME_DOMAIN</codesetn>
    <codesets>Data Model Dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using Municipal boundary source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>RECORD_DRAWING_FLAG</attrlabl>
    <attrdef>Engineering plan that has been accepted by the City of San Jose (Y or N).</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>USERNAME who last modified this record</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>ACQUISITION_DATE</attrlabl>
    <attrdef>Official date engineering plan accepted by the City of San Jose on this date</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Date/Time stamp of last record modification</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GEO_MOD_DATE</attrlabl>
    <attrdef>Time stamp when GEOMETRY column was last modified.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Time stamp when GEOMETRY column was last modified.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Data modified date.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GDO_GEOMETRY</attrlabl>
    <attrdef>Contains spatial data with true arc geometry.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Oracle Spatial Geometry Data - True Arcs</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MAN_OVERRIDE</attrlabl>
    <attrdef>This flag is 'N' by default. If this flag is set to 'Y' no unattended batch process will touch it ever again.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Flag set for batch process</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MESSAGE</attrlabl>
    <attrdef>Message from automated batch process to operator; can be "OK", or error message, or "to be checked", etc.</attrdef>
    <attrdefs>data model dictionary</attrdefs>
    <attrdomv>
    <udom>GDO_GEOMETRY.LEN</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PLAN_CREATED</attrlabl>
    <attrdef>PLAN_1 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_CREATED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present.</attrdef>
    <attrdefs>Data Dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>OTH_PLAN_DOMAIN</codesetn>
    <codesets>data model dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PLAN_MODIFIED</attrlabl>
    <attrdef>PLAN_2 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_MODIFIED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present</attrdef>
    <attrdefs>Data dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>OTH_PLAN_DOMAIN</codesetn>
    <codesets>data model dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>LINEAGE_ID</attrlabl>
    <attrdef>Artificial Numeric Identifier; Assigned to any graphical object; Unique throughout the system. Shared among tables. This column would also be used by EDL Administrator for lineage.</attrdef>
    <attrdefs>Data dictionary</attrdefs>
    <attrdomv>
    <udom>Artificial Numeric Identifier</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GDO_GEOMETRY.LEN</attrlabl>
    <attrdef>Created default</attrdef>
    <attrdefs>Data model</attrdefs>
    <attrdomv>
    <udom>unknown</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    </detailed>
    <overview>
    <eaover>Populated using MRF Tools</eaover>
    <eadetcit>Various sources</eadetcit>
    </overview>
    </eainfo>
    <distinfo>
    <distrib>
    <cntinfo>
    <cntperp>
    <cntper>Earl Harris</cntper>
    <cntorg>City of San Jose</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>Actual Address</addrtype>
    <address>801 N 1 ST</address>
    <city>San Jose</city>
    <state>CA</state>
    <postal>90000</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>408.277.5626</cntvoice>
    <cnttdd>408.277.5626</cnttdd>
    <cntfax>408.298.8382</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>9-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </distrib>
    <resdesc>Unknown</resdesc>
    <distliab>Unknown</distliab>
    <stdorder>
    <digform>
    <digtinfo>
    <formname>GM Pro Access</formname>
    <formvern>5.1</formvern>
    <formspec>GM Pro 5.1</formspec>
    <formcont>Easement data</formcont>
    <filedec>no compression applied</filedec>
    <transize>60</transize>
    </digtinfo>
    <digtopt>
    <onlinopt>
    <computer>
    <networka>
    <networkr>FTP</networkr>
    </networka>
    </computer>
    <accinstr>FTP</accinstr>
    <oncomp>FTP server</oncomp>
    </onlinopt>
    <offoptn>
    <offmedia>None</offmedia>
    <reccap>
    <recden>1</recden>
    <recdenu>None</recdenu>
    </reccap>
    <recfmt>None</recfmt>
    <compat>None</compat>
    </offoptn>
    </digtopt>
    </digform>
    <fees>Unknown</fees>
    <ordering>Unknown</ordering>
    <turnarnd>Unknown</turnarnd>
    </stdorder>
    <custom>Unknown</custom>
    <techpreq>Unknown</techpreq>
    <availabl>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    </availabl>
    </distinfo>
    <metainfo>
    <metd>20040512</metd>
    <metrd>20040512</metrd>
    <metfrd>20040519</metfrd>
    <metc>
    <cntinfo>
    <cntperp>
    <cntper>Mahesh P Choudhury</cntper>
    <cntorg>Rolta International Inc</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>mailing address</addrtype>
    <address>5865 North Point Parkway</address>
    <city>Alpharetta</city>
    <state>GA</state>
    <postal>30022</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>678.942.5015</cntvoice>
    <cnttdd>678.942.5015</cnttdd>
    <cntfax>678.942.5001</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>8-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </metc>
    <metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
    <mettc>local time</mettc>
    <metac>Unknown</metac>
    <metuc>Unknown</metuc>
    <metsi>
    <metscs>Unknown</metscs>
    <metsc>Confidential</metsc>
    <metshd>Unknown</metshd>
    </metsi>
    <metextns>
    <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
    <metprof>ESRI Metadata Profile</metprof>
    </metextns>
    </metainfo>
    </metadata>

    I am having error while registering as undefined element for citeinfo, timeinfo and cntinfo as shown below
    Please could you help me solve.
    thanks
    </xs:appinfo>
              </xs:annotation>
    </xs:element>     
    <xs:complexType name="citationType">          
    <xs:sequence>               
    *<xs:element ref="citeinfo"/>*          
    </xs:sequence>     
    </xs:complexType>
    SQL> BEGIN
    2 DBMS_XMLSCHEMA.registerSchema(
    3 SCHEMAURL => 'fgdc-std-001-1998-sect011.xsd',
    4 SCHEMADOC => bfilename('XMLDIR','fgdc-std-001-1998-sect011.xsd'),
    5 CSID => nls_charset_id('UTF8'));
    6 END;
    7 /
    BEGIN
    ERROR at line 1:
    ORA-31154: invalid XML document
    ORA-19202: Error occurred in XML processing
    LSX-00021: undefined element "citeinfo"
    ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 61
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 126
    ORA-06512: at line 2
    </xs:appinfo>          
    </xs:annotation>     
    </xs:element>     
    <xs:complexType name="timeperdType">          
    <xs:sequence>               
    *<xs:element ref="timeinfo"/>     *          
    <xs:element ref="current"/>          
    </xs:sequence>     
    </xs:complexType>     
    <xs:element name="current" type="currentType">
    </xs:appinfo>          
    </xs:annotation>     
    </xs:element>     
    <xs:complexType name="ptcontacType">          
    <xs:sequence>               
    *<xs:element ref="cntinfo"/>     *
    </xs:sequence>
         </xs:complexType>     
    <xs:element name="browse" type="browseType">          
    <xs:annotation>

  • WRT160N - LELA FAILED - ERROR - MSG_100_000_003 & Object ref not set to an instance of an object

    First of all I would like to say I'm very disappointed with Cisco/Linksys support. I made 6 phone calls and spent about 3 hours on hold and being connected to someone else over the course of about two weeks. The Tech supportin this particular case was the worst I have ever experienced. Regarding the problem - make sure that you do not have any items in the start up such as Linksys EasyLink Advisor and in particular nmctxth unchecked. Also, check that your Anti-Virus does not have the app blocked. I was instructed to uninstall and reinstall about six different times - which I did. This never solved anything. Then I notice a program named "Pure Networks", this appears to be app associated with LELA. The best I could tell this does not get uninstalled and reinstalled like the rest of the program. So I chased the app down to Documents and Settings\All Users\Application Data\Pure Networks\Setup\PlatformSetupInstaller_0.msi . Executed this program which initiated an install program for the same and selected the REPAIR option from the three options (Repair\Modify\Uninstall). After about two or three minutes the program indicated the Repair had completed and the PC needed to be rebooted. Which I did and now the program (LELA) works with no issues. I think when you uninstall and reinstall the LELA program this never gets executed. So when you manually run the program it actually gets executed. I performed this Repair when the file: PlatformSetupInstaller_0.msi was selected and actually executed. The following error messages were indicated before the issue was resolved:
    Error
    MSG_100_000_003
    Cannot find Platform service, make sure that the service is correctly installed on your machine.
    Error
    Object ref not set to an instance of an object.
    Error
    1628
     These errors occured when various items were selected in LELA and after reboot on reinstall. And by the way LELA would be blank with no Network Map present. If you go through the log files under the Documents and Settings\All Users\Application Data\Pure Networks and C:\Documents and Settings\All Users\Application Data\Linksys\Lela, then search for the word fail, you will turn up these errors in bits and parts. The registry key:  4CDCB1A1-87EE-49AB-9A9F-E270FC5DB823 led me to the Pure Networks program or I might not have figured it all out.
    All of these error messages are related to the log files in either folder indicated above. 
    I hope this helps everyone - again the support was pitiful and I really expected more.

     The Linksys Link Network Advisor (LELA) sometimes works, most of the times does not on our "House-PC"; we have to install the disk again when it gets stuck to make it work. Also, in order to make changes to our network, we can do it easily on its web site, but the LELA will not synchronize it sometimes; so we have to go again and put the disk in to re-install LELA and "synchronize" it; though in reality, it is as if we are installing LELA for the first time, everytime we want to make changes to our network, by the way, a real pain!! After reading the advice above, I also installed Sisco's (the Linksys parent company) Network Magic software and now all my computers in my network work seamessly, and perfectly well. I can even share my printers now!! Thanks for this advice; very helpful indeed.
    a happy network administrator

  • At Line selection problem

    hi,
    iam stuck up with AT LINE-SELECTION problem ie i designed a screen where they need month list on clicking F4. i got the month list using month_names_get in the screen but while clicking the relevant month no.it's not entering into the required parameter. i have attached the codings,
    MODULE MONTH_DIS OUTPUT.
      SUPPRESS DIALOG.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
      SET PF-STATUS SPACE.
      NEW-PAGE NO-TITLE.
      WRITE:/ 'SELECT MONTH' COLOR COL_HEADING.
      ULINE.
      DATA: T_MNTH LIKE T247 OCCURS 12 WITH HEADER LINE.
      refresh t_mnth.
      CALL FUNCTION 'MONTH_NAMES_GET'
       EXPORTING
         LANGUAGE                    = SY-LANGU
    IMPORTING
      RETURN_CODE                 =
        TABLES
          MONTH_NAMES                 = T_MNTH
       EXCEPTIONS
         MONTH_NAMES_NOT_FOUND       = 1
         OTHERS                      = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      loop at t_mnth.
        write:/ t_mnth-mnr, t_mnth-ltx.
      endloop.
      CLEAR T_MNTH-MNR.
    ENDMODULE.                 " MONTH_DIS  OUTPUT
    AT LINE-SELECTION.
      p_period = t_mnth-mnr.
      CHECK NOT p_period IS INITIAL.
      LEAVE TO SCREEN 0.
    here in the AT LINE-SELECTION, the selected month is not coming to the required parameter.
    pls help me in this issue,
    Thanks in advance,
    Premnath.

    You need to set a "Hide" after the write... I suggest you also set your own dialog PF-STATUS too so you can have just a PF2 "pick" button and a Cancel button ( this will look better to the user).
    loop at t_mnth.
      write:/ t_mnth-mnr, t_mnth-ltx.
      hide: t_mnth.  "needs this
    endloop.
    clear: t_mnth.

Maybe you are looking for