Selection profile - no data

Hi gurus,
this might be a basic question. Before posting here i have tried to research on my own and after getting no where i have come here to ask the gurus to help me with the issue.APO DP is new to me and i'm learning it as well.
in the planning book, we have mutliple selection profiles and when i tried to load the data from the selection profile. some selection profiles are blank and they are unable to load the data. what could be the reason? There are some selection profiles which have the data but its not teh full list.
few inputs - we have a weekly job running in ECP to transfer the materials and plants from ECC To APO. CFM1 and CFM2 tcodes in ECC.
our BW resource says that he is able to extract the sales orders histroy and open orders from ECC and able to load to APO everyday, which i kinda see in LISTCUBE tcode, but then why is that we are not able to see the data via the selection profile when we are able to see the data in listcube.
kindly help
Thanks
Ravi

Hello,
You said "we have multiple selection profiles".
But you didn't mentioned how exactly the selection profiles has created I mean for which charactorstics/attributes has created the selections.
For how many selection profiles you are not able to see the data.what are the charactoristics/attributes are there in those selections.
Have you given any of the Values for those charactorstics/Attributes when you create those selections.
Can you pls provide that information?
And also for your understanding pls check the below ways. Hope the below mentioned points will help you why the issue has raised.
1) Is all selection profiles created in PB for all the selections whether the data is loading from BI to APO BI or not?
2) Hope you or your BI guy already captured BI Report before facing this issue when your BI guy has loaded the data from BI to APO BI.
3) Now you are saying that issue has got resolved by reloading master data by your BI Resource and by doing consistency checks. Pls get the bex report download after reloading master data by your BI Resource which keyfigure the data is copying from BI to APO BI.
4) Compare both the Reports before master data reloading and after master data reloading and try to check for the selections which the data has missed in PB.
5) if data has missed only for particular skus, or depots. pls check clearly the attributes in the Selection profiles which data has not loaded prevoulsly and the Bex Report attributes i.e Infocube attributes/charactoristics.
As you said by reloading the master data by your BI Guy your issue has resolved.
Hope the above mentioned points will help you to understand completely about the issue.
if you want indepth clarity on your issue means pls reply me the above questions which I checked.
Regards,
Subhan

Similar Messages

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Very Urgent COOIS Selection Profiles

Dear All
I need a urgent help !!!! Please Kindly Help me into this
My client have a scenario where he wants to extract the Production order's only "REL" status with combination of Work-center
When we have choose the condition selecting the option of selection profiles and i have taken( SAP001 & SAP0011 )
And my doubt is when i am using SAP001 i am getting orders "REL" status but only i am able to display some orders one order
And When i am using SAP011 i am getting two orders and date range is same
How to achieve this i want to extract orders with "REL" status with combination of Work center
And i am using sys status CTRD Exclude enable & execute it will display only order release but its throwing an error in sys status is not unique
What is SAP001 is Dispatched means what?
Is there any BUG in the COOIS or need any sap notes
Please help me i am in great need
With Regards
Vasudeva

Go to BS42 and configure your own Z profile if the standard profile didn't meet your requirement.
The reason SAP011 is displaying two orders may be because one of the two order is not dispatched.
SAP011 display orders with operations =REL & ≠LKD.
SAP001 displays orders with operations = DSPT

Ability to call selection profiles in planning book using popup box

Hello does anyone know if it is possible to call a selection profile in a planning book using a popup box?
i.e. perhaps using a macro ?
Any help is greatly appreciated.
Thanks
Edited by: Ballance Agri-Nutrients on Feb 17, 2009 3:10 AM

Just wondering what is the business need this pop-up, based on user settings list of selection profiles already filtered and displayed in the planning book. User can select the profile just by clicking the list of selection profiles provided.
For the web enabled users, they can select data view, and selection profiles before they view the planning book screen. Check with your technical person they should be able to tell you if the same can be used and built a pop-up.
Hope this helps

User profile - hold data, set data & delete data

Hello friends,
In menu, system - user profile we have sub selections for Hold data, set data, Delete data.
What is the function of these selection items?
Thanks

Use Hold data to keep data values that you have entered in fields in an application for the duration of a user session. When you call up the application again, you can overwrite these values.
Once you set data, you can no longer overwrite these values and have to use delete data if you want to enter different values.

How can i check the selection profile

Hi Friends,
In BS42 have assigned selection status profile to status profile and few status are assigned to status profile(CRTD, APRV and REL)
In BS42 i can assign one type of status profile(say XXX) to more than on type of selection profiles(say AAA;BBB;CCC).
Now I am creating a appropriation request (AR). Now have approved AR. and if I check in AR-->Control data tab and clicking on display status overview i m getting here asystem and user status overview and after scrolling down I can see the status profile.
Now in AR how can I check that which type of selection status profile it is choosing though I am able to see the status profile.
Any pointers
Regards
Ashutosh

status selection profile is used to restrcit the selection of objects from the database
if you AR with REL and the status selection profile allows REL then this AR will be se;ected and displayed in the report.
You cannot see the status selection profile in any tabs on the object as you can see the system ans user status

Selection Profiles DP and SNP

Dear All ,
Need support . I have created a set of selection profiles in DP for which demand planning is being carried out . I release the Demand Plan to SNP every month .
SNP also has a set of selection profiles based on location product . What I want to make simple for the user is that only the products which have a demand qty in the Demand Planning ie qtys released month after month to SNP should be available to the supply planner in SNP book .
That is SNP Book for a horizon should contain only those selection profiles which have a forecast and need to be supply planned .
Would appreciate your support .
Prashant Kumar

Hi Prashant,
There is no easy or simple way to do create or assign seletive selection profiles in your SNP planning book. If you want you can do custom development to read the data in keyfigure and then modify the selection profiles (relevant tables are /SAPAPO/TS_SELKO and /SAPAPO/TS_SELPO).
Otherwise the better process for approaching this issue would be planning by exception. Use a macro to generate alerts for those products which have appropriate demand data. The supply planner should look at these alerts in Alert Monitor and from there directly go to the Interactive Planning Table for the respective location-product combination.
Thanks,
Somnath

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

To add a method on select of a date from a date input field

Hi,
I have a input field which is binded to context element, type date. Hence the output screen has a date popup, from which user can select any dates.
Is it any way i can have a action executed on select of a date value?
I mean when the user selects a date from the date field an wction should be called.
As I have chosen it to be input field so at present I have only the option of OnEnter, which is not fulfilling the requirement.
Regards,
Pranay

Hi Pranay,
Use the Date Navigator instead. It has got the same functionality as Date Picker (this is what you are using) & moreover, you can achieve what you desired. It has got the functions like onDaySelect, onWeekSelect & onMonthSelect & onSelect.
That will trigger the action what you want.
Regards
Chander Kararia
# Please close the thread once get the correct answer. Give rewards for answers.

Select list and date picker on one line - is this a bug?

I'm using: Application Express 3.2.0.00.27
Is the following a bug? If so, how do I get it reported so it will be fixed in a future release of APEX? If not, how do I do it so it ends up the way I want?
1. create blank page
2. create html region
3. create "select list" item (Begin On New Line - Yes, ...Field - Yes, ColSpan - 1, Row Span - 1)
4. create date picker item (Begin On New Line - No, ...Field - No, ColSpan - 1, Row Span - 1)
There will be other items displayed in more columns above what I just had you create above. I want the select list and the date picker to display next to each other on same line, so I placed date picker item on same line in same field as select list item.
HOWEVER... the date picker ends up displayed under the select list item (kind of), instead of next to it on the same line.
Here's what I get:
...................... [Select List Field] Date Picker Label
Select List Label
...................... [Date Picker Field]
Here's what I want:
Select List Label [Select List Field] Date Picker Label [Date Picker Field]
Thanks,
Steve
Edited by: sskelton on Aug 3, 2009 11:01 AM
Edited by: sskelton on Aug 3, 2009 11:02 AM

Hi Steve,
I'm not sure if it's the official way, but you could add a post here: Enhancement Request Thread : Post 3.1 - that's what I've been doing :D
Andy

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to pass the selected table row data from popup to source view

Hi ,
I have requirement of passing the data from popup view to source. , searching some data in popup view and displaying in table,
Like i am passing some input and click search button will display the data in table, when select any of the row in the table and click on the another button , i should be able to pass the select row to the source view and also should close the popup.
When i implement , In the popup windiw, when i enter the customer no, and click on search button, it is closing the popup itslef. not able to see the data in popup.
Can u tell me what is that soultion.
Regards
Vijay

Hi Harsimran
Thanks for the reply,
1) Source view
In "Source View" i have input field called Customer_no. But, the end user will not have any idea , what customer no to enter. so i am searching the customer no in the popup view.
1) Customer_no( This is an inputfiled , to get the customer no from the popup view)
2) Get Customer NO( This is a button to call the popup view)
"Get Customer NO" This button action will open the popup view.
In this popup, i have
1) Input field (To enter the search term)
2) Search (To seach the customer no based on the search term)
3) Table ( To display the search data)
4) Button in Table tool bar called "Select" .( To close the popup view after selected the required data in the table to pass it back to the source view).
so in the popup view what happening is, when i click on the search button itself , it is closing the popupview by transfering the first row of the tbale ,with out select the required row in the table.
i need to close the window after click on the "Select" button in the toolbar , after selected the required row data to trasfer in the table.
Can u pelase tell me what are the modifcations i need to do it.
Regards
Vijay

Can't delete previous unread messages in hub pinch view via select previous (hold date line)

Happily running OS 10.2.1.2141 on my Z10 (STL100-3). I was thrilled to see the hub's Pinch Selection Criteria option in 10.2.1 but did not have the occasion to try it. Then this weekend, my mailbox got flooded with email notices from our alert system and I was facing having to delete hundreds of emails the old tedious way, multi-select each email one at a time and hit the delete option. Well, that's when I tried to use the hub's new pinch selection option to "hide" my read messages. I then held the date line to select all the previous messages and hit the delete option which asked my if a really wanted to delete those messages. I confirmed by choice and poof! nothing happened. I tried several times to no avail, even trying with flagged messages. It looks like you can't delete messages while in Pinch Selection view if you select them via the Select previous (hold date line) method. It does work if you select/multi-select the messages manualy but what's the point then?....
So, unless i'm doing it wrong, this appears to be a bug.
Regards,
Francis.....

fpaquin wrote:
that should be the point of the pinch selection criteria and you're select by sender.... let's see if anyone can reproduce the "bug" on their handsets or better yet, BlackBerry confirms it's a bug or poor design......
when I pinch and hold a date bar, I get the trash can... do you not?
fpaquin wrote:
Yup, that's the tedious way I've always used, ok for a few emails, unacceptable for hundreds of emails.....
Oh, yea for hundreds. Do you get hundreds each day you need to delete?
Once you get caught up on your deleting, then your daily upkeep should be a reasonable low effort.
Anyways, that's how it works.
If you feel it is an OS issue... what OS are you on?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Selection profile - no data

Similar Messages

Maybe you are looking for