Selection Profile - what is it and where is it used?

Hi,
Kindly help to explain what a selection profile is and where it is used.  (The configration is Project Systems > Structure > Operative Stucture > Milestones > Define Selection profiles.
I want to understand if we still need to set this up even if we do not use milestones.
Thanks!
Regards,
Vivian

Dear Vivian,
if u r not using milestone then u do'nt need to do configure.
for more detail pls read following
Define Selection Profiles
In this menu option you define selection profiles that you can use to specify status combinations for selecting objects (for example, orders or operations). A selection profile is especially useful if you select a large number of objects repeatedly according to the same selection conditions (for example, orders for printing shop papers, for collective release, or for creating order valuations).
Selection procedure
The selection conditions are evaluated top-down. Here the following rule applies:
Several lines following one another that are linked by an OR are combined and evaluated together. From the block at least one selection condition must be fulfilled.
AND links blocks or individual conditions. All the blocks or individual conditions linked with AND must be fulfilled. An order is no longer part of the evaluation as soon as a block or individual condition is not fulfilled. That means that with every freshly inserted AND a bracket is inserted around the preceding expressions (conjunctive normal form). To select the desired status combinations a reforming of the selection conditions is necessary.
In general one can say that OR links more strongly than AND!
Example
You want to define a selection profile with which orders with the following status combinations are selected:
REL (released)
CRTD UND MACM (created and material committed)
To do this formulate:
REL OR (CRTD AND MACM)
But the system interprets:
(REL OR CRTD) AND MACM
Orders with the following status combinations are selected:
REL AND MACM
Thus the original formulation must be reformulated by "multiplying out" to:
(REL OR CRTD) AND (REL OR MACM)
Regards ,
Vivek Tripathi

Similar Messages

  • What is BAPI and where does it use

    Hi all
    What is BAPI and where does it useful for us. And as a functional consultant how much should i know it.
    regards
    Subrat

    Hi Subrat,
    You can get the information of whatis BAPI in SAP help link below...
    http://help.sap.com/saphelp_46c/helpdata/en/a5/3ec8464ac011d1894e0000e829fbbd/content.htm
    As a Functional consultent, it depends how close you are with the technical part of the implementation. if you are involved in some technical part, you need this information...
    Best Regards,
    Venkat.

  • Services Registry in PI 7.1 - What is this and where is it used?

    Hi,
    Can anyone tell me what is Services Registry in PI 7.1 ? What featuers are available in it and where is it used or how its helpful?
    I dont have access to it in my system, so am curious to know the contents of it!!
    Do we define global data types by any chance in the Services Registry ?
    Cheers,
    S

    Hi,
    What is Service Registry?
    Definition: Service Registry is a registry for Webservices that is located centrally within an SOA landscape.  In simple words u201Cwhere are our services implemented?u201D can be identified by using Service Registry.
    PI 7.1 contains a UDDI v.3 compliant Service Registry contains information about services provided in that landscape with references to the WSDL metadata relevant for those services and to the locations of the callable service endpoints.
    How the Service Registry used in PI?
    1.     As a Webservice provider we can publish Webservice.
    2.     As a Webservice consumer we can search for and find Webservices for consumption.
    3.     We can test our Webservices.
    4.     Manage third party Webservices and classify them to provide them for consumption in our system landscape.
    5.     Providing Deployment information (i.e End point information).
    Enterprise Services Repository (ESR):
    To support strategic service oriented approach SAP provides a new Enterprise Service Repository. ESR is a central repository of information that contains all the services. ESR is a container, stores all the underlying Meta data of application objects like service interfaces and descriptions. The global data types, interfaces and business processes maintained in Enterprise service repository which can be reuse where needed. The first implementation of ESR and its associated editors come in SAP Netweaver04u2019s, which has been evolved from NetWeaver Exchange Infrastructure Integration Repository. Enterprise service repository is a design time repository of service objects for ESA. You can model all service design objects for a process and can reuse the data types and service objects which are already maintained. All enterprise services are published in a central Enterprise service repository so they can be used by anybody who really needs that service includes customers and partners.
    The Enterprise Service Repository is the evolution of what it was known as the Integration Repository in XI.  Now the Integration Repository is called the ESR and XI is called PI.  Using the Integration Repository as foundation for the ESR made a lot of sense since many of the capabilities were already there: metadata storage, defining message types, data types, operations, etc.
         ESR is just like Integration Repository for XI.  Here you can design/define your Service Interfaces and Enterprise Services.
         ESR is the central repository in which Service Interfaces and Enterprise Services are modeled centrally and their metadata is stored.
         In simple words u201CWhat does the service do and what does it need?u201D can be answered from ESR.
         ESR is used for: -
    1.     Definition of Processes and Services
    2.     Store Service Metadata
    3.     Central Modeling and Design Environment.
    Global Data Types
         Definition: Global Data Types are company-wide, defined data types based on international standards.  They are based on the SAP methodology and are defined in a standards-based way in the ESR.
         They are based on the ISO 15000-5 and UN/CEFACT CCTS standards and act as the semantic building blocks for service interfaces.
         Global Data Types help you in standardizing service definitions across your organization and provide the key building blocks that can be reused across all your service definitions.
         Global Data Types have been approved SAP-wide by the Governance Process for Business Content.
         Global Data Types have been defined in the ESR and are described by XML schema.
    Thanks,
    Satya Kumar

  • My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

    My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Writing in pages in Afrikaans. Spellcheck keep on correcting to dutch. Switched off spell check and checkeed keyaboard settings. Where do I get languages other than what Apple offer and where is the dictionary, Library, spelling files.

    Writing in pages in Afrikaans. Spellcheck keep on correcting to dutch. Switched off spell check and also looked in System preferences - keyboard. this stops the "Auto-correct" but does not help me with Afrikaans or other language spell check.  Where do I get languages other than what Apple offer and where is the dictionary, Library, spelling files.

    You are basically limited to what Apple deigns to offer.
    Try LibreOffice [free] which has a huge selection of languages.
    Peter

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    endloop.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    Regards,
    navjot
    award points

  • OSS note 506603 What is it And where can I get it?

    Hello,
    I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
    Many thanks.

    Hi Eden,
    How are you doing ?
    OSS note is the older nomenclature for what is now SAP Notes.
    They are available at :
    http://service.sap.com/notes
    you will need a service marketplace user id to log on.
    alternatively, if you do not have access to service.marketplace.
    send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
    with respect,
    amit
    the note number 506603 :-
    Summary
    Symptom
    Additional information for SAP.Net Connector that was not included in the guide.
    Other terms
    SAP .NET Connector, Proxy Wizard
    Solution
    SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
    Version 2.0 is also available. Use only the new version for new developments.
    Report any problems with the SAP.NET Connector under the components:
    BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
    BC-MID-CON-DNC for problems with Communication Runtime.
    Known problems
    1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
    This is caused by a missing function module, which can be installed as described in Note 580834.
    2. Corrections for SAP.NET Connector 1.0
    The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
    3. Corrections for SAP.NET Connector 2.0
    For Visual Studio Integration (Design Time) following problems have occurred:
    For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
    The SAP wizard table does not work. Existing tables are not recognized.
    Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
    Header Data
    Release Status: Released for Customer
    Released on: 10.12.2004  16:40:26
    Priority: Recommendations/additional info
    Category: Installation information
    Primary Component: BC-OP-NET-NCO SAP .Net Connector
    Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
    Message was edited by:
            amit chawathe

  • What is JSF and where use it

    hi!
    i dont know what is jsf and where use it
    what different from JSTL
    thanks...

    At this level a visit to JSF-Tutorials (http://www.jsftutorials.net/) might the best thing to do. Or dig into a book.
    Basically it has a different scope than JSTL.
    JSF is a presentation layer framework. Other names in that area are:
    Struts, Spring MVC, Tapestry, and many more
    JSTL is a collection of JSP-tags and therefor covers only a VERY small part of the presentation layer. And it is very far away from a framework
    hth
    Alexander

  • What is Field Label ? and  where do we use it .

    What is Field Label ? and  where do we use it .

    Hi,
    You can assign text information to a data element with the field labels.
    The field labels are used to display a screen field. You can copy structure components and table fields from the ABAP Dictionary to the input template when you define a screen in the Screen Painter (Get from Dict. function). You can also assign a field a field label that is derived from the data element of the field.
    The text of the field label can be translated centrally with the translation tools. The text is then displayed in the input template in the user’s logon language.
    Short, Medium and Long Field Labels
    Keywords of different lengths for identifying screen fields. Since the space available for such texts depends on the input template, you can define the text information in three different lengths.
    A maximum length must be assigned for each field label. It is the upper limit for the lengths of all translations of the given text. The maximum length of the field label therefore should be somewhat longer than the given text in the original language.
    Headers
    This text is used as a column header when you output the contents of fields as a list in the Data Browser. It can also be assigned to a field in the Screen Painter.
    A maximum length must also be assigned for the header. It is the upper limit for the lengths of all translations of the header. Choose the maximum length of the header to be somewhat longer than the given text in the original language. Also note that the header is often displayed above the corresponding column when preparing list output. The length of the header therefore should not exceed the length of the data element.
    Short Field Label
    Definition
    One of the following:
    - Short field label
    - Medium field label
    - Long field label
    Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
    A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
    Medium Field Label
    Definition
    One of the following:
    - Short field label
    - Medium field label
    - Long field label
    Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
    A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
    Long Field Label
    Definition
    One of the following:
    - Short field label
    - Medium field label
    - Long field label
    Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
    A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
    Heading
    Definition
    One of the following:
    - Short field label
    - Medium field label
    - Long field label
    Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
    A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
    Thanks,
    Reward If Helpful.

  • Absolute dynamic select query with dynamic join and where

    Has anyone ever tried creating an absolutely dynamic SELECT query with dynamic Join and Where conditions.
    I have a requirement of creating such a query in an Utility Class, and i have written the code. But its throwing my sysntax errors.
    Please let me know where am I going wrong OR is it really possible to create such a dynamic Query??
        SELECT (FIELDS) INTO TABLE IT_TABLES
          FROM ( (ME->TABLE1)  inner join ( me->table2 )
          on ( on_condition ) )
          WHERE (me->where_fields).
    Ags.

    It worked for me in a following way:
    select * into corresponding fields of table <result_table>
            from (join_string)
            where (l_where).
    Where the contents of join_string were dynamically build using concatenation. So it will be something like
    concatenate ME->TABLE1 'as a INNER JOIN' me->table2 'as b ON (' into join_string separated by space.
    <...>
    add here matching/reference colums, something like
    concatenate 'a~' me->TABLE1_JOIN_COL into temp1.
    concatenate 'b~' me->TABLE2_JOIN_COL into temp2.
    concatenate join_string temp1 '=' temp2 into join_string separated by space.
    <...>
    concatenate join_string ')' into join_string separated by space.
    And then use similar approach for l_where variable.

  • What is this and where can I order this

    can someone tell me what this is and where I can buy it please?
    thank u

    can someone tell me what this is and where I can buy it please?
    thank u

  • I've just upgraded from Snow Leopard to Lion. Installation seemed to go OK but on rebooting it is asking where the System Events app is.  What is it and where is it located?

    I've just upgraded from Snow Leopard to Lion. The installation seemed to go OK but on rebooting it is asking where the System Events app is.  What is it and where is it located?
    Thanks

    If the dialogue appeared once, and you cancelled once, the dialogue may reappear when you next log in. For more certainty I suggest a restart of the operating system, then a log in.
    If you like: immediately after the problem is worked around, open the Console utility to see whether — amongst its view of all messages — there is an obvious sign of what caused the dialogue to appear. (If you see nothing obvious, don't waste too much time looking.)

  • "Account expired Renew subscription now to resume service." on my Mac with no source of ID. What is it and where does it originate?

    I keep getting this on my Mac with no source of ID. It keeps reappearing with no options other than "Renew Subscription". What is it and where does it originate?

    You have an account that has expired, but only you know what accounts you have.
    Check them.

  • What is YellowDeer and where do I find it?

    Ok so I am trying to get my Iphones "onto" my WI-FI access through my Cisco E1000 and have gone to the "start" and clicked on the Cisco Connect, yet everyttime I try it tells me "can not access your router - You can only access your router settings when you are connected to your router. And goes on to say "if you are NOT connected to YellowDeer you can't update your router".
    What is YellowDeer and where do  I find it? And what do they mean "not connected to my router, do I have to physically connect my cable to the router??
    Please help!!!

    Can you give a bit more details ? where is that YellowDeer message showing up ? on the Iphone ? What exact steps are you doing to get this message ?

  • I have recently downloaded sentinel mobilesafe to my iphone.When trying to set it up,it asks for my phones name.What is this and where do i find it?

    Hi,I recently downloaded sentinel mobilesafe to my iphone 4s. When trying to set it up,it asks for the phones name. What is this and where do i find it? Thanks

    Thanks Clyde will try it.

Maybe you are looking for