Selection Screen and Output

Hi,
I am developing one report. My customer is requested me he needs Selection-screen and Output of the report both need in the same screen i.e upper part is selection screen below is the Output..
Is it possible?
If YES could you please help me..........?
Thank you advance.......

Hi Kishore,
It is possible create the upper block using selection-screen this will be screen 1.Then create the another block and use INCLUDE to include the upper block.Hope your query resolves.
An example to create selection-screen.
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFROM,
CITYTO LIKE SPFLI-CITYTO.
SELECTION-SCREEN END OF BLOCK SEL1.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2
WITH FRAME TITLE TIT2.
PARAMETERS: AIRPFR LIKE SPFLI-AIRPFROM,
AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2.
SELECTION-SCREEN END OF SCREEN 500.
We can use loop at screen to make it active or inactive at user command.That is enter or F8 whatever user chooses.
Have a best day ahead.

Similar Messages

Add new field in selection-screen and output dynamically

hi gurus,
i need to add field in selectio-screen.
i need to validate the field with existing fields.
i need to add this in alv grid output list dynamically.
thanks & regards,
kgn9.

Hi
Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
IF SY-SUBRC = 0.
<BKTXT> = <.....>.
ENDIF.
Max

Using Selection screen and selection screen output

Hi All,
I am trying to execute AT SELECTION-SCREEN and AT SELECTION-SCREEN output. Both the para's working fine seperately. But when I execute them together AT SELECTION-SCREEN output is not working. Please let me know how to solve this problem. Please see below for the code.
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
             p_lgort LIKE mard-lgort OBLIGATORY,
             p_rlgort LIKE mard-lgort OBLIGATORY.
    PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
        SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
            PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
        SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
    PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
       SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
            PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
                        p_verid type afpo-verid MODIF ID cp1,
                        p_labst type mard-labst MODIF ID cp1.
       SELECTION-SCREEN: END OF BLOCK b2.
   PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
    IF p_boml <> 'X' AND
       screen-group1 = 'CP1'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    IF p_cmpl <> 'X' AND
       screen-group1 = 'CP2'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN.
IF p_boml EQ 'X'.
    IF p_AUFNR EQ space.
        MESSAGE e000(z1) WITH 'Please fill Production Order.'.
    ENDIF.
endif.
IF p_cmpl EQ 'X'.
    IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
        MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
    ENDIF.
endif.
Thanks,
Senthil

Hi Senthil,
As far as my knowledge is concerned AT Selection-Screen output and AT Selection-Screen wont work together.In this code you are trying to do the validation in AT Selection-Screen. Instead of that try doin your validations in Start-of-selection Event.
i,e., modify your code as follows:
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
p_lgort LIKE mard-lgort OBLIGATORY,
p_rlgort LIKE mard-lgort OBLIGATORY.
PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
p_verid type afpo-verid MODIF ID cp1,
p_labst type mard-labst MODIF ID cp1.
SELECTION-SCREEN: END OF BLOCK b2.
PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF p_boml <> 'X' AND
screen-group1 = 'CP1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
IF p_cmpl <> 'X' AND
screen-group1 = 'CP2'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-Selection.
Perform validation.
form validation.
IF p_boml EQ 'X'.
IF p_AUFNR EQ space.
MESSAGE e000(z1) WITH 'Please fill Production Order.'.
ENDIF.
endif.
IF p_cmpl EQ 'X'.
IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
ENDIF.
endif.
endform.
Kindly reward if useful.
Thanks,
pavithra

What is a Selection Screen and how to make it ?

What is a Selection Screen and how to make it ? Please explain the process.
Best regards,
Ryan

Selection Screen are used for the program reports. These allows you to input some values that are required to show the desired output.
for example : you want to show the list of sales orders between 1000 to 1999, you would write a select query as this (to make u understand better)
select vbeln from vbak into it_vbeln
             where vbeln GE 1000 " greater than or equal to
               and vbeln LE 1999. " less than or equal to
now if you wnat to do it dynamically, you need a selection screen
tables : vbak. " declaration
selection-screen : begin of block block1 with frame title text-003.
select-options : so_vbeln for vbak-vbeln. " selection range from __ to __
selection-screen : end of block block1.
now you can write the same select query as
select vbeln from vbak into it_vbeln
             where vbeln in so_vbeln.
Hope this is clear now
Regards
Gopi

Tell me about at selection-screen on output

hi,
could u explain at selection-screen on output
any body give the wchich purpose it was used?
i will be waiting for reply.
regards
eswar.

PBO of the Selection Screen
In the PBO of the selection screen, the
AT SELECTION-SCREEN OUTPUT
event is triggered. This event block allows you to modify the selection screen and its fields directly before it is displayed.
Initializations of selections screen fields at this moment always take effect, whereas at the execution of an executable program, initializations at moment INITIALIZATION only take effect at the first program start, and are otherwise overwritten by the previous user inputs at the beginning of AT SELECTION-SCREEN OUTPUT.
REPORT demo_at_selection_screen_pbo.
PARAMETERS: test1(10) TYPE c MODIF ID sc1,
            test2(10) TYPE c MODIF ID sc2,
            test3(10) TYPE c MODIF ID sc1,
            test4(10) TYPE c MODIF ID sc2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'SC1'.
      screen-intensified = '1'.
      MODIFY SCREEN.
      CONTINUE.
    ENDIF.
    IF screen-group1 = 'SC2'.
      screen-intensified = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
The parameters test1 and test3 are assigned to the modification group sc1, while test2 and test4 are assigned to group sc2. During the AT SELECTION-SCREEN OUTPUT event, the INTENSIFIED field of internal table screen is set to 1 or 0, depending on the contents of the group1 field. On the standard selection screen, the lines for test1 and test3 are highlighted while those for test2 and test4 are not, as shown below:
reward if useful
anju

Add custom fields on selection screen and ouput in Transaction QM11

Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.

Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

Selection screen and smartforms

Hi,
Can somebody share with me simple eg to
enter data via the selection screens and then pass those values to smartform.
i have used the following code.But whenever i execute it the smartform opens first. i want to open the selection screen first.Then after entering the data there ,the smartorm must open up with the entered values.
PARAMETER P_PARAM1 TYPE MYTABLE-COL1.
PARAMETER P_PARAM2 TYPE MYTABLE-COL2.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION '........................................'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
   PARAM1                    = P_PARAM1
   PARAM2                     = P_PARAM2
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Jay

Hi,
As asked I am sending this piece of a code so that you can get a clear idea for the same.If you face the difficulty again please let me know.
selection-screen begin of block b1 with frame title text-001.
parameters :
   p_carrid type spfli-carrid.          " Carrier Id.
selection-screen end of block b1.
Working variable
data:
f_name      type rs38l_fnam.         " function module name
start-of-selection.
perform open_smartforms.
form open_smartforms .
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 = '<formname>''
VARIANT                  = ' '
DIRECT_CALL              = ' '
   importing
     fm_name                         = f_name
   exceptions
     no_form                          = 1
     no_function_module       = 2
     others                            = 3
if sy-subrc <> 0.
    message id sy-msgid type 'S' number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.                               " IF sy-subrc ne 0
call function f_name
    exporting
ARCHIVE_INDEX                  =
ARCHIVE_INDEX_TAB         =
ARCHIVE_PARAMETERS    =
CONTROL_PARAMETERS   =
MAIL_APPL_OBJ                =
MAIL_RECIPIENT                 =
MAIL_SENDER                    =
OUTPUT_OPTIONS             =
USER_SETTINGS               = 'X'
    p_carr                                = p_carrid
exceptions
   formatting_error         = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled           = 4
   others                         = 5
if sy-subrc ne 0.
    message id sy-msgid type 'S' number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.                               " IF sy-subrc ne 0
endform.                               " OPEN_SMARTFORMS
Regards,
Suvajit.

Selection screen and DP

Hi friends
          Can any one tell me which event triggers first and the order of event triggering when both selection screen and dialog program is used..Also tell me which event wont fire.
Regards
Suresh.A

Here is the Sequence.
1. First Load-of-Program event is triggred by default when you execute any report.
2. Inisilization.
3. At-selection Screen output.
4. At selection Screen.
5. Start-of-selection.
6. end-of-selection.
if you are calling screen in your report you will be doing so in Start-of-selection
then after start-of-selection.
              Process before output
              Process after input
             (if you add POH, and POV, these event will trigger when you press F1 or F4)
              End-of-selection.
Thanks & regards

Making selection-screen fields output only

Hi all and thanks for the quick replies to my last question!
Here comes another one: Does anyone know how to display a parameter field in a selection screen as output only?
Thanks
Magnus

hi Magnus,
   Check event AT SELECTION-SCREEN OUTPUT.
<b>PARAMETERS: P_MNTH RADIOBUTTON GROUP H1 USER-COMMAND ABC DEFAULT 'X'</b>
                                                         MODIF ID ABC.
<b>AT SELECTION-SCREEN OUTPUT.
IF P_DETA = 'X' OR P_STRT = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'ABC'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.</b>
Regards,
santosh
Message was edited by: Santosh Kumar P

Difference b/w At-selection-screen and onfield

Hi,
     What is the difference between at-selection-screen and at-selction-onfield?

Different Types of Selection Screens
What is:
1. at selection-screen on field
2. at selection-screen output
3. at selection-screen block
4. at selection-screen on value-request
5. at selection-screen on help-request and their difference?
For knowing Selection-screens:
First you must have right understanding of Events.
- Events are introduced by Event Keyword. They end when again next processs begins.
Selection-screens are special screen defined in ABAP.
- This ABAP at run time only controls the flow logic of Selection-screens. The PBO and PAI triggers the num of. selection-screens.
The basic form of the selection screen events is the AT SELECTION-SCREEN event. This event occurs after the runtime environment has passed all input data from the selection screen to the ABAP program. The other selection screen events allow programmers to modify the selection screen before it is sent and specifically check user input.
At Selection-screen OUTPUT is trigerred in PBO of selection-screen.
- This allows you to modify the Selection-screen, before it is displayed.
At Selection-screen On Field is triggered in PAI of selection-screens.
- The input fields can b checked,in the corresponding event block. If an error message occurs within this event block, the corresponding field is made ready for input again on the selection screen.
At Selection-screen On Block is trigerred in PAI event.
- You define a block by enclosing the declarations of the elements in the block between the statements SELECTION-SCREEN BEGIN OF BLOCK block - END OF BLOCK block. You can use this event block to check the consistency of the input fields in the block.
At Selection-screen On value request.
- This event is trigerred for F4 help.
At Selection-screen On help request .
- This event is triggered when the user clicks F1 for help on fileds.

Need to have pop up window in selection screen and capture the user action.

Hello Friends,
                     I have a requirement, that need to show a pop up window after execution, and to get the action from user using a Push button.
I create a selection screen and a sub screen as window.
After user execute from the selection screen, I am popping up this window.
Window contains some input values to be entered and push button to identify the user action.
I try to capture the user action using sy-ucomm, but it does not hold any value when user press the button.
How to overcome this issue.
Here is the definition of the window.
Pop Up Window for getting values
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW TITLE title .
PARAMETER : p_vdate LIKE t9aa01-validfrom,
            p_dcggt LIKE t9aa01-hkont,
            p_dcgst1 LIKE t9aa01-hkont,
            p_dcgst2 LIKE t9aa01-hkont,
            p_na LIKE t9aa01-hkont.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 20.
SELECTION-SCREEN PUSHBUTTON 2(10) text-001 USER-COMMAND SVE.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 500.
Cheers,
Senthil
Edited by: Senthil on Jan 7, 2008 11:03 AM

Hi,
Try using the below code.
       data : w_var type string.
       CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
          DEFAULTOPTION        = 'Y'
           textline1            = 'test '
         TEXTLINE2            = ' '
           titel                = 'check'
         START_COLUMN         = 25
         START_ROW            = 6
         CANCEL_DISPLAY       = 'X'
        IMPORTING
          ANSWER               = w_var.
                 if w_var = 'J'.
                 else.
                 endif.
Comments : J indicates Yes and N indicates No
Regards,
Jeswanth

Background Processing, Selection Screens and Variants

Hi All,
I am having a little trouble Background Processing with Selection Screens and Variants.
When a user runs my report and selects the option of background processing, then they select a checkbox. Once this is checked, they should go and fill in details, press Execute and voila a background process is created. However what is happening is that when i execute it then it asks for a variant. I do not want this to happen. I want the values in the selection screens to be used as default. Here is my code for background processing
FORM START_BACKGROUND_PROCESSING.
CALL FUNCTION 'BP_JOBVARIANT_SCHEDULE'
    EXPORTING
      TITLE_NAME            = 'End Customer Report '
      JOB_NAME              = 'customer_report'
      PROG_NAME             = 'ZSE_SD_SALES'
EXCEPTIONS
    NO_SUCH_PROGRAM       = 1
    OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "START_BACKGROUND_PROCESSING
After the background process is started, all teh data is collated then written to the app server. this is the order
ELSEIF R2 EQ 'X' AND SY-BATCH EQ 'X'.
    PERFORM INITIALIZE_DATA.
    PERFORM SELECT_DATA.
    PERFORM PROCESS_DATA.
    PERFORM GET_END_CUSTOMER_DATA.
    PERFORM WRITE_TO_APP_SERVER.
Any ideas? Points given to those who are helpful

done myeslf

Selection-screen and GET

Hi all,
in my program i use PNP logical database, so system create automatically selection screen. Nice.
When user fill selection screen event start-of-selection is launched and i do GET PERNR for read data from PNP.
But my customer want to add field in selection screen. Ok, i did that. Well, now he want that when a user fills new fields the PNP is not read i.e GET PERNR shouldn't be launched, so i my program i write this :
if myfield is initial.
GET PERNR.
else.
PERFORM get_data.
endif.
But when i compile program i can't do that and i don't know how to make this and if it's possible.
Regards,

Hi tafkap,
1. u have created a z report and
   u are using PNP logical database.
2. u say,
, now he want that when a user fills new fields the PNP is not read i.e GET PERNR shouldn't be launched
suppose this is achieved, then how
are u going to fetch the data
and show the report ?
3. If u already have the logic for
   getting information from database and showing
   to the user,
   then do not use GET event.
(It is not compulsory in a ldb)
4. Instead use START-OF-SELECTION
   event
   and do the normal programming.
5. In such case,
   the selection screen (and ur extra field(s))
   will be displayed as usual
   and your own code will get triggered
   at start-of-selection.
I hope it helps.
regards,
amit m.

AT SELECTION-SCREEN and AT USER-COMMAND.

Hi everyone,
I am a newbie in ABAP programming please help me out on this problem.
I need to display a screen dialog (Window) with search results immediately after I entered the search parameter in another dialog box after i clicked the 'execute' icon/button which is on the search screen dialog.
Any code snippet(s) would be really appreciated, thank you.

hi
good
check out this events
AT SELECTION-SCREEN-ON FIELD.
AT SELECTION-SCREEN-ON OUTPUT.
AT SELECTION-SCREEN-ON HELP REQUEST( F1).
AT SELECTION-SCREEN-ON VALUE REQUEST(F4).
thanks
mrutyun^

SUBMIT Zxx VIA SELECTION-SCREEN AND RETURN

SUBMIT Zxx VIA SELECTION-SCREEN AND RETURN
and it's dont make f8 why

wa_rspar-selname = 'P_DEALNO'.
wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'.
wa_rspar-option = 'EQ'.
wa_rspar-low = T_FORDER-DEAL_No.
   APPEND wa_rspar TO rspar.
Submit ZSDR_SALESORDER_DISPLAY
     using Selection-screen '1000'
           WITH SELECTION-TABLE rspar.
orelse
*submit RSEIDOC2 with docnum-low = docnum with
                   credat-low = credat
                           and return.

Selection Screen and Output

Similar Messages

Maybe you are looking for