Selection screen COMMENT font

Hello,
In a screen I have a SELECTION-SCREEN line which contains a comment, followed by a PARAMETER, followed by another comment, followed by a PARAMETER.
Here is the example code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(14) text-s01 FOR FIELD p_1.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_1 LIKE sy-uzeit DEFAULT '000001'.
SELECTION-SCREEN COMMENT 52(3) text-s02 FOR FIELD p_2.
SELECTION-SCREEN POSITION 58.
PARAMETERS: p_2 LIKE sy-uzeit DEFUALT '240000'.
SELECTION-SCREEN END OF LINE.
For some reason the second COMMENT is showing with a different font. Can anyone help me understand why?
Thank you,
Nuno Silva

Hi
I test it on my system and noticed the same behavior.
text-s01 = 'TOX'
text-s02 = 'TOX'
We can notice differences between the O and X.
No idea why.
That is SAP
If you found a solution, please post it.
Regards
DSTJ

Similar Messages

Trailing space when using SELECTION-SCREEN COMMENT

Hi All,
I need to display a continuous text (length :130) in selection screen. I am trying with SELECTION-SCREEN COMMENT option and i m aware that we can display max of 79 characters. So i split the text into length: 70 & 60 and coded as below
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) text-001.
SELECTION-SCREEN POSITION 73.
SELECTION-SCREEN COMMENT 73(60) text-002.
SELECTION-SCREEN END OF LINE.
Problem is: After displaying first text (text-001), there is a gap of 10-15 characters, then second text starts (text-002). I mean, there is a trailing space.
If i give all text-001 in CAPS, then there is no trailing space. But i dont need to display the text in CAPS.
Do i need to proceed in any other way?, please provide your inputs
Vinoth

Your SAPgui to use a proportional font for texts and descriptions (where "i" is much shorter than "W") when it use a non-proportional for input fields. But it use this non-proportional font for input fields even if input is not allowed.
Try this sample to solve your problem. (But your text will be in a box)
REPORT zfontst.
CONSTANTS ctxt TYPE c LENGTH 80 VALUE 'AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz'.
PARAMETERS: p1 TYPE c LENGTH 56.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (2) p2a.
SELECTION-SCREEN POSITION POS_LOW.
SELECTION-SCREEN COMMENT (56) p2.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p3 TYPE c LENGTH 56 MODIF ID dsp.
AT SELECTION-SCREEN OUTPUT.
p1 = ctxt.
p2 = ctxt.
p2a = 'P2'.
p3 = ctxt.
LOOP AT SCREEN.
    CASE screen-group1.
      WHEN 'DSP'.
        screen-input = '0'.
    ENDCASE.
    MODIFY SCREEN.
ENDLOOP.
Regards,
Raymond

ABAP Query Selection Screen Comment

Hi,
I want to display some text (just text) on Selection Screen of an abap query. If this was a regular abap program I could have simply used "SELECTION-SCREEN COMMENT... " and that would have been enough. But since I dont seem to have access to Initialize event I cant use this option.
1. Is there some way I can write code which will be executed in the initialize event of the abap query
2. Is there some other way for us to just display comment (without any selection field) on the selection screen of abap query.

Hi Saquib,
Is the navigation correct ? I dont see any onfoset anywhere on se38 editor. Can you eloborate please.
Thanks and Regards,
Ben.
Message was edited by: Daniel Ben

Selection screen comments in italic.

Hi ,
I have a requirement to display the selection screen comments in italic format.
Please suggest.
Thanks,
Suchi.

I am not a 100% sure but i think this is simply not possible.

Selection screen comment as input field

Hi Experts,
I have a comment in my program using following statement,
SELECTION-SCREEN COMMENT 27(60) dispath.
by default this statement is in output mode ...can we change that as input...
Not to forget i dont want to use PARAMETERS.
Thanks
Sid

Hi Sid,
Only options possible in selection screen comment are:
SELECTION-SCREEN COMMENT [/][pos](len)
                         {text|{[text] FOR FIELD sel}}
                         [VISIBLE LENGTH vlen]
                         [MODIF ID modid]
                         [ldb_additions].
i think its not possible.
Regards,
Talwinder

Selection-screen comment.....?`

Hi All,
I need explanation for the following statement
SELECTION-SCREEN COMMENT 1(15) TEXT-001.
What does 1 and 15 mean in the above statement?
Regards
Dnyanesh

Hai Go through the following Document
SELECTION-SCREEN COMMENT fmt name.
Additions
1. ... FOR TABLE dbtab
2. ... FOR FIELD f
3. ... MODIF ID mod
4. ... ID id
Effect
Generates a comment on the selection screen. For the name name , there are two options:
name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
Note
The field name is generated automatically and so cannot be defined with DATA .
With comments, you must always specify a format fmt (see variant ULINE ).
Note
You must program a new line yourself via the format fmt .
Addition 1
... FOR TABLE dbtab
Note
See variation 3 (SELECTION-SCREEN SKIP).
Addition 2
... FOR FIELD f
Effect
Since the comment is assigned to a parameteror a select-option , the help display shows the documentation of the reference field if this parameter or selection option.
In addition, the comment is suppressed if the reference object was set to 'invisible' via a selection variant.
Note
In database access routines, the comment is generated whenever the reference field is output. Therefore, you should not use the addition FOR TABLE with this variant.
Example
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(20) TEXT-001
FOR FIELD PARM.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
SELECTION-SCREEN END OF LINE.
This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.
Addition 3
... MODIF ID mod
Addition 4
... ID id
Thansk & regards
Sreenivasulu P

Selection screen comment..getting error...!

Hi..,
My code:
SELECTION-SCREEN COMMENT 80(2) text-027
Error Which I am getting with above syntax:
The specified offset "80" is too large (maximum:79)
Q: How to slove this? and here I need that text 27 is in greater than 80th position only.
Thanks,
Naveen.I

>
Avinash Kodarapu wrote:
> The maximum length to display text on the selection screen is 80 chars.
No, You can exceed this limit.I'm able to display the screen text upto 83.
>
Gautham Vangaveti wrote:
> I think it is possible only upto 79.
Which version you are in?
>
Naveen Inuganti wrote:
> So we can'nt able to adjust the screen offset here?
No, you can set offset upto 83 position.
Just run this below code:
REPORT test.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 83(2) text-005."I have 'To' in text-005 and make sure length is 2
PARAMETERS: p_li AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
>
Sathish Reddy wrote:
> if you use comment statement with in the frame then you can't exceed 79.
> if you use comment statement with in line then you can't exceed 83.
That's true.

How to hide a selection screen comment ?

Hi Experts,
I have an issue in Interactive report...
I know by using LOOP AT SCREEN we can modify screen elements like HIDE ... in the AT SELECTION-SCREEN OUTPUT event
But my question is i need to HIDE Selection screen comment also...I can this be achieved....???
Please do reply me with a solution...
Thanks in Advance...
Reddy Arun

Hi Reddy,
              Please go through below code..
it will fulfill ur requirements
REPORT 123.
PARAMETERS : RB_USER RADIOBUTTON GROUP za .
PARAMETERS : RB_MAN   RADIOBUTTON GROUP za .
PARAMETERS : RB_MAN1   RADIOBUTTON GROUP za DEFAULT 'X'.
AT SELECTION-SCREEN OUTPUT.
   PERFORM f13000_check_radio.
FORM f13000_check_radio.
     IF rb_man1 = ''.
LOOP AT SCREEN.
     IF screen-NAME = 'RB_MAN'.
       IF rb_man = 'X'.
         screen-active = 0.
         rb_man = ''.
       ELSE.
         screen-active = 1.
       ENDIF.
       MODIFY SCREEN.
     ENDIF.
     IF screen-NAME = 'RB_USER'.
       IF rb_user = 'X'.
         screen-active = 0.
         RB_USER = ''.
       ELSE.
         screen-active = 1.
       ENDIF.
       MODIFY SCREEN.
     ENDIF.
ENDLOOP.
     ELSE.
       LOOP AT SCREEN.
     IF screen-NAME = 'RB_USER'.
         screen-active = 1.
            MODIFY SCREEN.
     ENDIF.
   IF screen-NAME = 'RB_MAN'.
         screen-active = 1.
       MODIFY SCREEN.
     ENDIF.
   ENDLOOP.
ENDIF.
ENDFORM.           " f13000_check_radio

Change Color of SELECTION-SCREEN COMMENT

Hello!
I want to change the color of the text of my comments for parameters in my selection-screen. Is that possible?
What kind of design option do I have within the selection-screen? (Background, Colors, etc...)
Regards Michael

check out this sample code.
REPORT YRJKSJKJFKD
       NO STANDARD PAGE HEADING.
SELECTION-SCREEN COMMENT /1(50) comm1 MODIF ID mg1.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /1(30) comm2.
SELECTION-SCREEN ULINE /1(50).
PARAMETERS: r1 RADIOBUTTON GROUP rad1,
            r2 RADIOBUTTON GROUP rad1,
            r3 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN ULINE /1(50).
AT SELECTION-SCREEN OUTPUT.
comm1 ='Selection Screen'.
comm2 ='Select one'.
LOOP AT SCREEN.
    IF screen-group1 = 'MG1'.
       screen-intensified = '0'.
       screen-color = '0' .
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
for screen-color the possible values are
Syntax of color value in col color
{ COL_BACKGROUND } 0 GUI-specific
{ 1 | COL_HEADING } 1 Gray-blue
{ 2 | COL_NORMAL } 2 Light gray
{ 3 | COL_TOTAL } 3 Yellow
{ 4 | COL_KEY } 4 Blue-green
{ 5 | COL_POSITIVE } 5 Green
{ 6 | COL_NEGATIVE } 6 Red
{ 7 | COL_GROUP } 7 Violet
Regards
Raja

REG hiding selection-screen comment

Hi all,
Cud any one tell me how to hide a selection-screen comment.

hi chaitanya,
see the example may be useful.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(8) PWD.
SELECTION-SCREEN POSITION 35.
PARAMETERS: PASSWORD(8) MODIF ID AAA.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PROGRAM(8).
SELECTION-SCREEN END OF BLOCK BLOCK.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'AAA'.
      SCREEN-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
reward if useful,
thanks and regards

Selection screen comments

Hi ,
My requirement is to put the description ( in blue colour ) of the input field on the selection screen on the right handside of the field after the user enters a certain value.
How do i go abt it..Plz help .
Thanx nd regards,
Srestha

HI,
check this example report it is doing the same.
<b>REPORT zwa_test1 line-size 132 line-count 60.
TABLES: fmfincode.
SELECTION-SCREEN BEGIN OF LINE.
selection-screen comment (11) text-004.
parameters : fcode type fmfincode-fincode .
parameters: fc_desc(50) MODIF ID FC visible length 40 default 'abc'.
SELECTION-SCREEN END OF LINE.
AT selection-screen output.
LOOP at screen .
IF screen-group1 = 'FC'.
    Screen-input = 0.
    SCREEN-INTENSIFIED = 1.
    Modify screen.
endif.
ENDLOOP.
at selection-screen on fcode.
SELECT SINGLE beschr FROM FMFINT INTO fc_desc
WHERE FINCODE = fcode.</b>
REgards,
HRA
Message was edited by: HRA
Message was edited by: HRA

Selection screen Comment Maximum length 79 ???

Hi,
I have a requirement to write down a report instructions on a report selection screen.
Can we increase the comment length size?? it looks awkward because only half of my screen width is being filled and I have a requirement to write more than 400 characters.
Are there any alternatives?
Regards
Vara

Is this Still True, can't we put comment more than 79 characters in single line???
Please respond if any body have any clue !!!
Sas
Is there any clue???
Edited by: saslove sap on Mar 17, 2010 4:21 AM
Edited by: saslove sap on Mar 17, 2010 5:40 AM
Edited by: saslove sap on Mar 17, 2010 8:12 AM
Edited by: saslove sap on Mar 17, 2010 8:21 AM
Edited by: saslove sap on Mar 17, 2010 9:16 AM
Edited by: saslove sap on Mar 17, 2010 10:35 AM
Edited by: saslove sap on Mar 17, 2010 10:46 AM
Edited by: saslove sap on Mar 17, 2010 11:47 AM
Edited by: saslove sap on Mar 18, 2010 6:37 AM

Coloring Selection-Screen Comments

Hello,
how can I assign an other color to a comment in a selection-screen?
Thx

Hi Mike,
DATA: BEGIN OF itab OCCURS 0,
        BUKRS LIKE T001-BUKRS,
        BUTXT LIKE T001-BUTXT,
      END   OF itab.
PARAMETERS: P_BUKRS TYPE BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BUKRS.
PERFORM F4_FOR_BUKRS.
*&      Form F4_FOR_BUKRS
FORM F4_FOR_BUKRS.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
        ES_SELFIELD TYPE SLIS_SELFIELD.
Get data
SELECT BUKRS
         BUTXT
         FROM T001
         INTO TABLE itab
         up to 10 rows .
Get field
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = SY-REPID
            I_INTERNAL_TABNAME = 'ITAB'
       CHANGING
            CT_FIELDCAT        = IT_FIELDCAT[].
LOOP AT IT_FIELDCAT.
    IT_FIELDCAT-KEY = SPACE.
    IF IT_FIELDCAT-FIELDNAME = 'BUTXT'.
      IT_FIELDCAT-EMPHASIZE = 'C710'.
    ENDIF.
    IF IT_FIELDCAT-FIELDNAME = 'BUKRS'.
      IT_FIELDCAT-EMPHASIZE = 'C610'.
    ENDIF.
    MODIFY IT_FIELDCAT.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
I_TITLE                       = 'THIS IS FOR F4 IN COLOR'
      I_TABNAME                     = 'ITAB'
      IT_FIELDCAT                   = IT_FIELDCAT[]
    IMPORTING
      ES_SELFIELD                   = ES_SELFIELD
    TABLES
      T_OUTTAB                      = ITAB .
ENDFORM.                    " F4_FOR_BUKRS
check with the Above code...
This ia an example code...
thanks,
Neelima.

Adding Comments in Selection-screen of report

Hi,
I want to add comments/Instructions on a selection -screen of a report.
How do we do that?
Regards
Vara

Hi Vara,
REPORT demo_sel_screen_select_comment.
SELECTION-SCREEN COMMENT /2(50) text-001 MODIF ID sc1.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN COMMENT /10(30) comm1.
SELECTION-SCREEN ULINE.
PARAMETERS: r1 RADIOBUTTON GROUP rad1,
            r2 RADIOBUTTON GROUP rad1,
            r3 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN ULINE /1(50).
SELECTION-SCREEN COMMENT /10(30) comm2.
SELECTION-SCREEN ULINE.
PARAMETERS: s1 RADIOBUTTON GROUP rad2,
            s2 RADIOBUTTON GROUP rad2,
            s3 RADIOBUTTON GROUP rad2.
SELECTION-SCREEN ULINE /1(50).
INITIALIZATION.
COMM1 ='Radio Button Group 1'.
COMM2 ='Radio Button Group 2'.
LOOP AT SCREEN.
    IF screen-group1 = 'SC1'.
      screen-intensified = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
reward if helpful
regards,
keerthi.

Selection screen font

Hi,
Can anyone let me know how can I make a text or comment in a selection screen
(SELECTION-SCREEN: COMMENT /1(65) TEXT-005.) to a different color or make it bold?
Thanks.
Uma.
Message was edited by:
        Uma

HI,
Can you highlight the comment. Use the below code
SELECTION-SCREEN: COMMENT /1(65) TEXT-005 FOR FIELD P_BUKRS MODIF ID SC1
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'SC1'.
      SCREEN-INTENSIFIED = 1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
the above code would highlight your comments. Usually the highlighted text would be in Red or blue color.
Regards,
Vara

Selection screen COMMENT font

Similar Messages

Maybe you are looking for