Selection screen drop down
Hi,
How can I define the dropdown in selection screen.
I want to give 4 options for file download
1. comma dilimited
2. tab
3. colon
4. space
parameter : p_dilimit (here i want to define as dropdown list on selection screen).
Thanks.
Hi,
VRM_SET_VALUES is used to display list of values for drop down field.
Please go thru the following code for better understanding.
REPORT ZLIST.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST.
PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION-SCREEN OUTPUT.
NAME = 'PS_PARM'.
VALUE-KEY = '1'.
VALUE-TEXT = 'LINE 1'.
APPEND VALUE TO LIST. VALUE-KEY = '2'.
VALUE-TEXT = 'LINE 2'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
START-OF-SELECTION.
WRITE: / 'PARAMETER:', PS_PARM.
Similar Messages
-
I have had my Note 3 since about 14 months now and have loved it until the last Verizon update. Since the update my reception is very poor / "breaks up" in my shop. This is the same shop I have been working in for 6 YEARS!!! Also when I select a drop down tab like a credit card month and make my selection it NEVER saves the 1st time, always have to do it 2x. The internet used to work great in my shop and could stream Pandora without an issue, now it take 2 minutes to load the first song.
I feel these simple software issues could make people feel the need to upgrade their phone even though there is nothing wrong with their current phone, pretty creative sales tactic if you ask me. All I want is my phone to work like it did prior to the 1/16/2015 update. If I have change my ways and run my off wifi everywhere like I had to back when I had Sprint I might as well switch to a cheaper provider.
My time is money and wasting time trying to make a phone work like it did before a software update is very frustrating. I have already gone to a Verizon store and was told to do a complete reset. I spent 2 hours saving everything to my cloud, reset the phone and the same problems still exist. Please help me find a solution to my problems ASAPIt is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.<br>
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Auto-populating Infopath fields from a Sharepoint list after selecting a drop down
I currently have two lists one titled 'Book of Work' which holds details around on-going projects and the other titled 'Book of Work Amendments' which are requests submitted by users to change project details (through an infopath form).
There is a column in the BoW Amendments list entitled 'Select Project' which has a lookup to 'Project Name' in the BoW list. The aim is that when a user chooses an option from the 'Select Project' drop-down, other fields in the form such as 'Project Manager',
'Project Description' will be automatically populated with data from that row in the BoW table.
I have connected both Sharepoint Lists as data connections with BoW Amendments being the primary and BoW the secondary. If we take the Project Manager field as an example the method I have attempted is as follows:
. Create a rule with condition Select Project is not blank
. Action - Set a field's value: Field: Project Manager (BoW Amendments - Primary) Value:
Project Manager (BoW - Secondary) Add Filter: Project_Name (BoW - Secondary) =
Select Project (BoW - Primary)
Currently this is not populating the field when the project is selected in the drop down, any assistance would be greatly appreciated.Hi Josh,
This should be straight forward. You do not need BOW Amend data connection. You are creating requests in this list so this will be your Main Data Connection.
When creating the rule on the drop down, select Action:
Condition: anytime the value changes, Set a field's value - Project Manager (Main); Value - Project Manager(BOW) where Project[BOW] = Project [Main]
Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration*** -
Urgent help!display db value as selected in drop down using select option
Hi All,
My problem is i had resultset from database and i want to display it as drop down.By default it should show the actual database value for that field also user should be able to change it by selecting from drop down. What is happening is it is by default displaying the last value from the resultset and not the selected one. my code on JSP is :
<%
Statement stm1 = null;
ResultSet rs1 = null;
stm1 = con.createStatement();
rs1 = displog.searchorthodon(con);
String qry1 = "SELECT * FROM orthodontab;";
rs1 = stm1.executeQuery(qry1);
%>
<table width="100%" border="0" cellspacing="1" cellpadding="1" bgcolor="#444444" align="center">
<tr>
<td width="171px" align="right" class="txtFieldLable">Orthodontist :
<td width="171px" align="left" height="33" class="freeformfielddata">
<select name="orthoden">
<% while (rs1.next()){ %>
<option value="<%=inputorthodon%>" selected ><%=rs1.getString("ortho_name")%></option>
<%} %>
</select>
Thanks and Regards.I will be greatful to know where i am going wrong.<% int i = 1;
while (rs11.next()){
if (i==2)
{%>
<option value=i selected ><%=inputap%></option>
<%}
else
%>
<option value=i ><%=rs11.getString("AP")%> </option>
<% }i++;}i=1; %>
</select>
<%
This is a code and here instead of if(i==2) i actually want to compare rs11.next() with inputap. what will be the syntax.any help will be greatful -
Multiple selection from drop down : NWDS7.0 SPS18
Hi Team,
How can achieve multiple selection from drop down? I am working on NWDS7.0 SPS18. I have known the concept of item list box... is that's the only option?.
Is it possible to make it as filter option that we have in our Microsoft excel.
Customer wants select either/all options @once from drop down.
TIA,
Vanita KHi,
Create a node with cardinality 0-n and selection property set to 0-n
Create a table UI element and bind this node as a datasource to this table.
Set the selection mode property of this table as auto or multi
Once this is done, populate the node with some data elements.
When you run the application, you will be able to select multiple rows from the table.
To get the selected rows, use below code on the action of some button
wdComponentAPI.getMessageManager().reportSuccess("Selected rows are");
int n = wdContext.nodeEmployeeData().size();//size of node binded with table
int leadSelected = wdContext.nodeEmployeeData().getLeadSelection();
for (int i = n - 1; i >= 0; --i)
if (wdContext.nodeEmployeeData().isMultiSelected(i) || leadSelected == i )
IEmployeeDataElement employeeDataElement = wdContext.nodeEmployeeData().getEmployeeDataElementAt(i);
wdComponentAPI.getMessageManager().reportSuccess("ID: "+employeeDataElement.getID()+"Name: "+employeeDataElement.getName());
For adding sorting and filtering functionality to the table follow the article
[WDJ - A Generic Java Class for Filtering Web Dynpro Tables|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d5b593-ba83-2910-28a9-a7a7c7f5996f]
Regards,
Amol -
ListViewWebPart has limited to 50 views item in Selected View drop-down property
Hello, we are currently in a context where we have over 70 view in one document library. When we add this document library into a custom webpart page, and choose "Modify Share Web Part". the "Selected View" drop down only contain the first 47 view + 4 default view. We are unable to chose view #48 to 70.
Does it exist any config to show more then 47 view in the "Selected View" drop down property of a "ListViewWebPart".
N.B.: We know 70 view is a lot, but we are in a context where we needs those 70 views and they are named a easy way so the end-user can easily choose from them.
Thanks!Also having the same problem.
The views in the dropdown are sorted alphabetically so the first 50 are selectable.
A workaround:
- create a new view called aaa which is an exact copy of the view you want to display in the LVWP
- now select the aaa view in the LVWP to display
Regards, J. -
Add SC Status List( Drop Down) values in SC status screen Drop Down Box
Hi Gurus,
My requirement is that , In SC <b>Check Status</b> screen "<i><b>Find the SC section</b></i>" we have ("Item Description" "Name of Shopping Cart" " Timeframe" "Status" )fieds are there.. I need to add one values (Deleted) in to the Status Drop Down Box.
Then If I selected this deleted values from the status which should display only Deleted SC in the Search Result section.
Pls Help me out from this issue.
Regards,
Kumar SHi Sivakumar,
I found solution for you but you have to change in the standard as there are no exits for this.
Are you interested by changing the standard?
regards,
Laurent. -
Can we select from drop down box ?
Hi,
I have a requirement where I need to select a value from a list and based on the value , the result shuold generated. for example, I have created a RTF in word ,
now I need to select a hotel chain and based on that the result should occur on the screen.
hare krishna
AlokDid you mean drop down box on rtf template?Yes
What version are using? EBS or Standalone? Oracle XML publisher template builder for word.
version 5.6.2
hare krishna
Alok -
IView Personalize Screen Drop Down Width
Hello,
Any idea on how to control the width of the select/drop down list box when usiing the SAP provided personalization screen in an iView? When an end user goes to personalize the iView, the select box is too small to see the values.
My portalapp.xml property looks like this:
<property name="searchType" value="Team Peers">
<property name="personalization" value="dialog"/>
<property name="type" value="select[Direct Reports,Team Peers]"/>
<property name="description" value="PERSONALIZE_SCREEN_SEARCH" />
</property>
The only way I have seen to control the width is to create a string property and then by setting the value you can set the width of the second column. My problem is that I don't want the user to have a string input field, they need to select from a drop down.
I am trying to avoid writing my own personalization screen, because this is a very simple iView.
Any ideas?
Thanks in advance,
SeanHi Sean Coverstone,
I am not sure whether I understood your question clearly.
My Assumption is that you want to control the dropdown list box size in your personalization dialog box.
Create a class called MyPersonalization under com/test/personalization/.
Create your own GUI part here.Use layouts for controlling the width and height.
Enter something like this in your portalapp.xml.
<component-profile>
<property name="PersonalizationClass" value="com.test.personalization.MyPersonalization"/>
</component-profile>
Now you can set dropdown list box widh like this..
ivuList.setWidth("200");
Hope it helps.
Regards,
Karthick K Eswaran -
Web UI - Value not getting selected from drop down list .
Hi All ,
I am facing a problem in one of the fields which is enhanced with a drop down functionality .
I have created the GET_V_** method and also the GET_P_** method for the same .And finally I am able to see the values in the drop down list . But the problem is , when I am trying to select a value from the drop down no values are selected .
Can anyone plese help me in this as What has to be done .
I have taken references from few guides but I am not getting any clear idea of what has to be done .
Regards,
RanjitaHi Ranjita,
To trigger a round trip, you must have given the event name in GET_P method.
Same event handler would trigger.
Please put a break point in Event Handler in IMPL class, and in SET_attr method of the attribute in CN class and see if value is getting set properly or not. Final value that would be displayed on UI would be there in GET_attr method of CN class.
I hope it helps.
Thanks,
Rohit -
How can I select from drop-down list and jumping to selected subform?
I using LC Designer ES2 vers 9. Developing XDP. How can I Select from a drop-down list the appropriate selected subform (jumping to the selected subform on the page)?
drop-down list...A (jump to subform1)
B (jump to subform2)
C (jump to subform3)
subform1
subform2
subform3
....end of formHi,
you cannot set focus on a subform but on a field, as only interactive objects can be focussed.
From a dropdowns exit event the script will look this way:
switch (this.rawValue) {
case "A" : xfa.host.setFocus("form1.page2.field1"); break;
case "B" : xfa.host.setFocus("form1.page2.field1"); break; -
Prevent Identical Selection in Drop Down List in an Expanding Table
Hi All,
I have a 2x2 table in which the top row is a header row and the bottom row 'Row1'. Row1 Cell1 has two buttons in it, one to add a new Row1 using Javascript click instance script:
this.parent.parent.instanceManager.addInstance()
...and one to remove any Row1 using Javascript click instance script:
var rowNum = this.parent.parent.index;
this.parent.parent.instanceManager.removeInstance(rowNum);
Row1 Cell2 contains a datadropdown object. Basically, when a user adds an extra Row1, I need to prevent them from selecting a previously selected item from the dropdowndata list. I'm having trouble figuring it out because I'm trying to put together exit instance script (or should it be validate script?) that is trying to reference Row1[*]. In simpler situations where I have two fixed objects, I have just been doing this as a FormCalc exit script:
if (Object1 = Object2)
then xfa.host.messageBox("You can't select the same thing again")
and xfa.host.resetData("Object1")
endif
... which prevents the user from selecting something with the same rawvalue by alerting them, then clearing the field.
Hope this makes sense and that someone can help! Thanks in advance to all the adobe gurus out thereHi,
Would it be possible to filter out the choices in the drop down list that have already been selected. If so you could try something like this JavaScript in the preOpen event of your drop down.
var dropDownItems = [ "abc", "def", "hij" ];
var rows = Table1.resolveNodes("Row1[*]");
for (var i = 0; i < rows.length; i++)
var row = rows.item(i);
if (!row.DropDownList1.isNull)
dropDownItems = dropDownItems.filter(function(element) { return element !== row.DropDownList1.rawValue});
this.setItems(dropDownItems.join(","));
The first line initialises a variable with all the possible values and then we go though each row filtering out the ones already selected.
You will probably have to change the form object names to suit you form, but here is my sample to test the code, https://files.acrobat.com/preview/eb0256dc-af30-4f7c-9187-469ba84464a4
Regards
Bruce -
Displaying user selection from drop down list in static text on master page
Hello,
I am using LC 7.0 at workk and I have hit a road block.
I have a drop down list at the top of the form. Once the user makes a selection, I want to take that value and paste it in static text located on the master page. I can't seem to get it to work.
Please help!!!Hi,
Place the Drop Down list on form
Place text object(s) on master page
here is the script to display the value and/or text of drop down
Script will be on Drop Down list events
Calculate event to display value of DD - FormCalc
form1.pageSet.Page1.StaticText1.rawValue = this.rawValue;
Change event to display Text of DD - JavaScript
form1.pageSet.Page1.StaticText2.rawValue = xfa.event.newText;
SAVE the form as dynamic pdf.
Hope this will help.
Thanks,
Raghu. -
I have a form created in Adobe Pro X that has a drop down box for participants to select the number of presenters they have. Is it possible that when they select the number of people, the correct number of boxes pop up for them to enter personal details for each presenter? e.g. 2 presenters = 2 pop ups?
This was answered recently by Gilad D here:
https://forums.adobe.com/thread/1501711 -
How to filter selection in drop down box in Report Builder 3.0
New to SQL reporting services -
what is the syntax for filtering the drop down list in Report Builder 3.0?
I have the following: =Parameters!ReportParameter1.value and =Fields!Store.value
my drop down shows the project name numerous times rather than just once.New to SQL reporting services -
what is the syntax for filtering the drop down list in Report Builder 3.0?
I have the following: =Parameters!ReportParameter1.value and =Fields!Store.value
my drop down shows the project name numerous times rather than just once.
Hi ,
If I understood your requirement clearly then you need distinct value in Parameter list.
In this case you need to select a distinct record in dataset that will be further used as Parameter input.
Lets say your pameter accept value from dataset1;
select 'Project1' pp
union all
select 'Project1'
union all
select 'Project1'
union all
select 'Project2'
union all
select 'Project2'
union all
select 'Project3'
so in this case your report parameter will show.
By selecting distinct record you will get ;
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com
Maybe you are looking for
-
Hi, Is there any report specific to see the contra made for AP and AR invoices. Also, please let me know the transaction code to clear the Vendor AR and AP contra invoice. Please advise on the other reports , may be a list of reports available. Regar
-
Error "602" System error: AK Datapart too short
Hi all, Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around. Anyway here it is: While running a compression in BW we get Error "602" System error: AK Datapart too short
-
I apparently made the serious error of buying a network drive-- and while I was able to load my iTunes files onto it, suddenly the folder disappeared and I cannot find ANY method of finding it and removing it so I can salvage my files. The drive make
-
I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining? I have a sony handicam and I imported the clips t
-
Exit Code: 34....FATAL: Payload - installation of CS6
Downloaded from the Adobe website, extracted the files to the desktop, and run the installer from: Desktop\cs6\Adobe CS6\set-up.exe After making me sign in, and accept and begin, i get the error: Exit Code: 34 -----------------------------------