Selection Screen field selection in logical db PCH

Is any one have any idea how to code the select option part such as..
report should run if PCHOBJID is selected
or any other (custom define field in parameter) field which is not PCH field.
I will really appreciate.

What exactly is ur requirement? You want to use LDB PCH & u have a custom field parameter & u want to validate it?
Then after GET OBJID, you can check for ur custom field for the data & then only you can proceed further by using an 'IF' statement.
If this is not your query, then explain in brief clearly your requirement, so that we can help you.
Thanks,
Sarika.

Similar Messages

Difference between At selection-screen and At selection-screen field

I need to know the difference between
Difference between At selection-screen and At selection-screen field
Regards
Shashi

Hi,
AT SELECTION-SCREEN is the event triggered in the PAI of the selection screen.
AT SELECTION-SCREEN on field field_name is the event specific to the field and is triggered when u press enter in that field.
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
SELECTION-SCREEN FIELD SELECTION
FOR {NODE|TABLE} node [ID id].
Effect
This statement defines a node node in the structure of the logical database for field selection. If a node belongs to type T, you can use the TABLE addition instead of NODE. The statement cannot be used for type C nodes. .
If a node is defined for field selection, you can use an executable program linked to the logical database in the GET statement to control which fields in the node are to be read by the logical database. If you use the function module LDB_PROCESS, the FIELD_SELECTION parameter must be specified accordingly.
for more details check this link...
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka.

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

How to validate selection-screen field

Hi all,
How to validate a selection-screen field defined as a select-options.for Ex i declared a selection-screen field select-options:s_matnr for mara-matnr.
 Then how to validate this field.

Hi,
write the below code in AT SELECTION-SCREN.
EX :
AT SELECTION-SCREEN.
*-- Validate the Selection screen data
PERFORM VALIDATE_SELSCR_DATA.
WRITE THE below code in Form "VALIDATE_SELSCR_DATA".
IF S_MATNR[] IS INITIAL.
*--MATNR is initial.
 message e000(MsgCLass) with 'matnr is empty'.
ELSE.
 SELECT MATNR
 INTO MARA-MATNR
 FROM MCHA
 UP TO 1 ROWS
 WHERE MATNR IN S_MATNR.
 ENDSELECT.
 IF SY-SUBRC <> 0.
 MESSAGE E000 WITH 'Invalid MATNR entered'.
 ENDIF.
ENDIF.

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

Selection screen fields are not getting detected in an infoset in code

Hi All,
I am developing an infoset query using logical database 'PNPCE'. I am facing problem while writing a validation on selection screen fields on an infoset query at infoset code level.
The fields that are under program specific selection are determined at runtime with variables viz. SP$00001, SP$00002 etc. There are actually select options on selection screen of an infoset query.
So I cannot write a direct code on these fields as they do not exist at infoset level and hence cannot be detected.
I want to put down a validation that if user does not select anything on selection-screen and executes the query, then he should get a pop-up message 'Narrow down your search...' and he should go back to selection screen again.
Is there any alternative way to achieve this?

hi,
Your Screen resolution is more in the system that's why while creating it was fine and while executing it was gone after the next field.
so you better create a frame and place that inside it or you can change cols size in the properties about the columns you want

Auto Incrementation of a Selection-Screen Field

Hi Folks,
How to Increment a Selection-Screen Field (Consider Parameter)..
When we press a back button on Urs Output List.
( For Example : we have a slelction screen field (parameter) by name customer. When we enter 1000(say) in it then an output list is displayed.
after we press the BACK button on the displayed list the next time the Selectio screen fieeld should Automatically Display an Incremented value of 1001 (instead if 1000).
Plz help me..!!

hi
try this logic
at user-command.
case sy-ucomm.
when 'BACK'.
customer = customer + 1.
leave to screen 100.
endcase .
Cheers

Dynamic Selection Screen Fields

Hi All,
I have made a copy of the program FI_RFSOPO00. This report uses dynamic selection screen. I wanted to know the names of these dynamic selection screen. As I have to make some database selections based on the user entries in these fields.
Is there a way to find this out?
Regards,
Stephen

Hi Stephen,
1) FI_RFSOPO00 is unknown- i think you mean RFSOPO00
2) RFSOPO00 uses logical datbase SDF, which uses
free or dynmaic selections from the tables ska1,skb1
and bsis.
see F1 to SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab and ta SE36 to SDF too.
regards Andreas

How to refresh value in selection screen field

Hi Experts,
I have a requirement to refresh the value in selection screen.while i run the report in selection screen i selecting one variant for look the output if i use some other field value with same variant without save its working fine i am avle to see the data but while i come back to again selection screen and selecting some other variant that extra add value is not getting refresh its showing with new variant.Its happening for only one variant not for all if i select some other variant then its getting refresh value in same field.Any one can help me for this issue.
Thanks.

Hi,
That means, I believe - the value that is "not changing" is saved in the particular variant. You can easily verify it by starting the report without variant and then selecting the variant in question. Remove the value from screen and save the variant again. Don't forget to check of variant needs to be transported from development system...
cheers
Janis

Truncation of selection screen field in reports

Hi,
Is there any way to avoid truncation of selection screen fields in ABAP reports? For eg, I declare:
SELECT-OPTIONS: s_test FOR ztest-test_field NO INTERVALS
The length of this field in the table is 30 chars. However, on displaying the field via selection screen, this gets truncated to around 18 or so. How do I avoid this as I need to display the full length of the field?

Hi,
Try this
Tables : makt.
select-options maknr for makt-maktx.
now go to the screen painter of your program in change mode and move the Help buttons first to the Right each. now increasethe length of the Matnr Field length so that they are equal to 40 Char. in your program you have handle the length now if you want to restrict to 18 otherwise it will be ok
if they don't fit you need incease the Size of the Screen Visible area both in the Screen Painter as well as in the
Screen Attributes
You also get an Information Message just ignore that.
Just open your program in SE80 if you can't go to the screen painter in SE38. the other way just keep this program in Display mode and execute then take F1 help , take Technical Information and double click on the Screen number now go to the Screen Layout and go to Change mode here.
Regards,
Shirisha

Selection screen field not accepting 0 as a value

i have declared a field in the selection screen as
SELECT-OPTIONS: s_level FOR crmm_territory-level_id .
and this field will comprise of values from 0-9. but when im executing the report this field is not accepting 0 as a value, instead it is treating it as a blank and providing me all the values for s_level from 0-9.
its working fine with any other value and is displaying their respective values for 1-9
only problem is when i give the value as zero.
also in the debugger i tried to IF s-level[] is not initail...its showing it as initial
while i have provided it a value of 0.
thanks.

Hello Divya,
If you are giving 0 in the select-options....
if that field is numeric... it means that it is inital.
If that field is character... then it will display the result accordingly.
Check with the data element of the reference field.
Reward If Helpful
Regards
Sasidhar Reddy Matli.

Selection screen field problem

Hello experts..
i have a selection screen , in that i have a field   s_bwart for mseg-bwart.
some times the user will input the data in the field and sometimes he wont. we have fixed movement types combination like
11-21 , 13-24 , 13-56 , 101-543 , 101-544 etc.
if the user did not input any thing in the selection screen , i am populating s_bwart in at-selection screen event with all the mvt types. after executing the report when user presses the back button to come to the selection screen, there the s_bwart field is containing all the mvt types in single values ie in the select options screen. So the user dont want that, if he comes back nothing should be there in the selection screen field s_bwart if he has not inputted anything. if he inputs only 11 mvt type then when he comes back after executing the report he should see only 11 in the select screen field ie s_bwart. Please send the replies on how to solve the problem.

hi,
in ur program try to display values for users in START-OF-SELECTION event as it triggers after the selection screen displayed for users. if user doesn't give any input then display default values in this event. and also create a variable
for ex:
data: ws_flag type c,
         p_value type i.
after u display default values for users in selection screen assign the flag as ' X '
ws_flag = 'X'.
before leaving ur program based on flag try to do like this.
if ws_flag = ' X '.
    clear s_data. // s_data is the select options for u.
else.
     s_data = p_value. // the value which user gave in selection screen as i/p.
endif.
if helpful reward some points.
with regards,
Suresh Aluri.

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Selection screen fields

Hi,
I want to group the selection screen fields. where should i group.
I want to group using the modif Id
T Y P E S
TYPES:
BEGIN OF TYVBAK,
VBELN TYPE VBAK-VBELN,
AUART TYPE VBAK-AUART,
AUDAT TYPE VBAK-AUDAT,
KUNNR TYPE VBAK-KUNNR,
NETWR TYPE VBAK-NETWR,
END OF TYVBAK.
D A T A      D E C L A R A T I O N S
DATA:
STVBAK TYPE TYVBAK,
ITVBAK TYPE TABLE OF TYVBAK.
S E L E C T I O N    S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SKUNNR FOR STVBAK-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
SVBELN FOR STVBAK-VBELN,
SAUDAT FOR STVBAK-AUDAT.
SELECTION-SCREEN END OF BLOCK B2.
I N I T I A L I Z A T I O N
*INITIALIZATION.
FILLING SELECT OPTIONS WITH DEFAULTS
SKUNNR-SIGN = 'I'.
SKUNNR-OPTION = 'BT'.
SKUNNR-LOW    = '1'.
SKUNNR-HIGH   = '4000000'.
APPEND SKUNNR.
T O P   O F P A G E
TOP-OF-PAGE.
WRITE:/1'SALES DOC',12 'DOC TYPE',20 'SALES DATE',32 'NETWORTH',60 'CUSTOMER'.
*A T   S E L E C T I O N    S C R E E N    O U T P U T .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'SVBELN-LOW'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'SVBELN-HIGH'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
where should i group SBVELN and SAUDAT

Hi
Instead of SCREEN-NAME use SCREEN-GROUP1 and for your select options give MODIF ID.
As follows
SELECTION-OPTIONS: selcrt for dobj MODIF ID MOD1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'MOD1.
SCREEN-REQUIRED = 1.
MODIFY SCREEN.
ENDLOOP.
This is COZ when you use select-options you get TWO fileds on the INPUT screen LOW and HIGH so you have to check for selcrit-low and selctri-high you can avoid all this my assigning a MODIF ID.
See this sample programs for this
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP

Selection Screen field selection in logical db PCH

Similar Messages

Maybe you are looking for