Selection screen for EEA report

Hi guys
Q1 - I need help on understanding what should be inputs filled in selection screens fields of EEA report (WEIMS) for Canada :
LEAVE Definition section - what does this field mean on selection screen - should we be entering Leave of absence action here or Separation / termination actions?
Q2 - in my system there are aproximately 200 terminations in system for reporting period 2013, but not sure why term report of WEIMS is pulling only 10 .. and most of those PERNRs dont appear in error log either.
Thanks

Employee File
If the data of an employee is correct (as per data elements below) , the PERNR , his IT0077 , IT0008 salary, NOC code etc are picked up in Employee file including Full time, part time and temporary employees:
IT0001 has Work contract field maintained.
IT0016 Contract type Infotype is maintained.
IT0077 infotype is maintained with correct CMA code.
All Permanent and Full-time employees on LOA will appear in Employee file.
Term FileEmployees having work contract as Temporary will qualify to appear in this file, if following data criteria are met:
IT0001 –work contract= Temporary
IT0016- Contract Type = Fixed term with end date
IT0077 infotype is maintained with correct CMA code.
This file is NOT providing us information about employees who got terminated in reporting year , instead this pulls up Contract start and end date for Fixed term contract Temporary employees.
All Temporary employees on LOA will appear in Term file.
Promo fileIF any employee has had Org change with reason as Promotion ( what we define in Selection screen) in reporting period , this file will pull up data of the employee with promotion date, irrespective of Employee type (permanent / temp etc) and employment status ( active / inactive/ withdrawn) if following data paramenters are maintained appropriately:
IT0001 – work contract is filled
IT0016 – Contract type is maintained
IT0077 maintained with correct CMA code.
Error file Will have all employees having incorrect / missing data for selection screen.

Similar Messages

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Skipping Selection Screen for a report program

Hi guys,
I have a report program that works in 2 modes - Create and modify ( There is a toggle button in the ALV report). Its an editable ALV grid. There are 2 tcodes - zcreate and zmodify to access the same report in 2 above modes. For zmodify, i have a selection screen. How do i skip the selection screen for zcreate ?
Here is my report program
REPORT ZSWR_RCKDVOLS .
INCLUDE ZSWR_RCKDVOLS_TOP.
INCLUDE ZSWR_RCKDVOLS_CLDEF.
INCLUDE ZSWR_RCKDVOLS_CLIMP.
INCLUDE ZSWR_RCKDVOLS_SELSCR. " Selection Options are written in this.
INCLUDE ZSWR_RCKDVOLS_PBO.
INCLUDE ZSWR_RCKDVOLS_PAI.
INCLUDE ZSWR_RCKDVOLS_FORM.
INITIALIZATION
initialization.
perform layout_build.
AT SELECTION-SCREEN
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
 into lv_plnt
 where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
END-OF-SELECTION.
CHECK: NOT gi_zswt_rckdvols[] IS INITIAL.
set SCREEN 100. "Main Screen
A sample code will be greatly helpful.
Thanks,
SHK

So if we were to implement this in your program.....
report zswr_rckdvols .
include zswr_rckdvols_top.
include zswr_rckdvols_cldef.
include zswr_rckdvols_climp.
 include zswr_rckdvols_selscr. " Selection Options are written in this ".
* Add this line into your selection screen include.
parameters: p_switch type c no-display.
include zswr_rckdvols_pbo.
include zswr_rckdvols_pai.
include zswr_rckdvols_form.
* INITIALIZATION
initialization.
perform layout_build.
* AT SELECTION-SCREEN
at selection-screen output.
if sy-tcode = 'ZCREATE'
 and p_switch = space.
 submit zswr_rckdvols
 with p_switch = 'X'
 and return.
 leave program.
endif.
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
into lv_plnt
where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
* START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
end-of-selection.
check: not gi_zswt_rckdvols[] is initial.
set screen 100. "Main Screen
Regards,
Rich Heilman

Selection screen for HR report with logical database PNP

Hi All,
I am writing a HR report. And I use the logical database PNP. Also I create a HR report category for this report. In the report category, I can define the selection screen field. But all these fields are selection option format. My question is How can I add parameters, radiobutton group and checkbox in the selection screen. Thanks.
Alex

Hi Alex,
Sorry for replying so late. Please try this tutorial:
w w w. s a p t e c h n i c a l. c o m -> tutorials -> ABAP-HR -> Creating HR Report category in PNP logical database
Sorry, I put it like this, because direct link doens't let me post the answer. Don't know why.
It can also be something with your custom code in selection screen. Though it works fine for, try to remove COMMENTs and observe the result. Maybe parameters are overlapping somehow. First try this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
parameter BFlag type c RADIOBUTTON GROUP grp1.
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If that works together with the report category, try to extend it with adding a selection-screen comment, but do this in reversed order (comment goes first and FOR FIELD addition is supplied) like this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 3(10) text-003 for field bflag. "FOR FIELD, and goes first
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 16(10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If still not working, see if text-003 and text-004 are not too long (you expect them to be 10 chars), This may somehow affect selection screen.
You may also try with setting cursor position explicity by:
SELECTION-SCREEN begin of line.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT (10) text-003 for field bflag.
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN POSITION 16.
SELECTION-SCREEN COMMENT (10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
It is really hard to identify where can be a bug as it is working fine for me. Keep trying with different variations, it should finally run with some.
Regards
Marcin

Search help in selection screens for interactive report

A search help can only be assigned to DB table.
So my doubt is can it also be used for seletion screens created for an interactive report?
If yes what is the procedure.. Please give me one example at least...
waiting for your valuable suggestions.....
Thanks,
regards,
Chinmay

Hi Chinmay,
I suppose your requirement is to give search help to selection screen elements.
Here is the code.
REPORT ZSHAIL_F4HELP .
parameters: name(10) type c .
TYPES: BEGIN OF VALUES,
 CARRID TYPE SPFLI-CARRID,
 CONNID TYPE SPFLI-CONNID,
 END OF VALUES.
dATA: PROGNAME LIKE SY-REPID,
 DYNNUM LIKE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
 VALUES_TAB TYPE TABLE OF VALUES.
at selection-screen on value-request for name.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
 tabname = 'DEMOF4HELP'
 fieldname = 'CARRIER1'
SEARCHHELP = ' '
SHLPPARAM = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'CARRIER'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
 FIELD_NOT_FOUND = 1
 NO_HELP_FOR_FIELD = 2
 INCONSISTENT_HELP = 3
 NO_VALUES_FOUND = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
I hope your query is solved.
If so,please award points.
Regards,
Sylendra.

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

Dynamic selection screen for custom ABAP report

Hi,
His it possible to create a custom ABAP report with a dynamic selection screen. The report doesnot use a logical database. If possible sample code will be appreciated.
Regards,
Chandra Kumar

hi
use this link
Dynamic selection screen
Cheers
Snehi

Modifying selection screen for adding material type in report ME2L / ME2N

Dear Friends ,
I want to add Material type as another selection criteria for the report ME2L.
How can i manage it using customising or ABAP enhancements ?
I do fine various enhancement point in its coding but not getting exact clue for managing this .
Thanks in advance.

Hello....
The program for the t-code ME2L is RM06EL00
In this we have the following portion
Parameter und Select-Options *
After this we have a couple of Select-options and parameters
followed by includes
INCLUDE fm06lcs1.
INCLUDE fm06lcs3.
INCLUDE fm06lcs4.
INCLUDE fm06lcs2.
You can write the select-options/parameters in any of these includes
Fot this..click on the spiral icon-> go to any include
click on "EDIT"(from the top menu) -> "Enhancement operations" -> "show implicit Ehhancement options" -> click on "RM06EL00"(report name)
A different coloured line appears at the bottom of the include.
Place your cursor on this line ..Right click -> "Ehhancement Implementation" -> Create ...give names according to customer name space and write your code here ...then activate it.....
Please also note that this selection must be filtered somewhere..so search the code for the tables that may contain this field and see if an "ENHANCEMENT-SECTION" or point/spot is available
Pls check , revert and reward if helpful
Regards
Byju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

Issue in Selection Screen of ABAP report after executing it using TCode

Hi,
I have one Z program having a selection screen for it. One selection variable is non editable for the users (has default value) whereas user can enter the value in other selection variable.
To make the first variable non editable, I have used the following code.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-name = 'P_USER'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Now when I execute this program from SE38, it works fine. But when I execute it using a Tcode (assigned in SE93), the first variable also become editable for users.
How can I keep the first variable non editable even after executing the program using a Tcode?
Regards,
Yogesh

Hi,
It seems you create a Transaction type: Dialog transaction.
Delete current transaction and create one with Transaction type: Report transaction (radio button in row 2nd)
regards,

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

Report Groups - Selection screen on receiver report

Hi there,
When dealing with sender / receiver reports, do you know if it's possible to force a selection screen prompt when calling a receiver report during execution?
A report was written in the Report Painter, and belongs to a report group called 1OAB. This report group has three receiver reports defined, so when users double click on a value, it will forward navigate to another report (receiver report, selected after double click) using the same selection criteria of the current report (sender).
My problem, is that the selection criteria that is passed by the sender isn't sufficient for the receiver report, and the report ends up running with a much larger selection than required.
My question, is whether or not we can either:
a) Interrupt during the report call and prompt with the report selection screen for the receiver report. This would allow the user to input any missing selections.
b) Add in any missing selections via a user exit. I have not had much luck in finding such an exit. The closest I got was form 'USEREXIT1' from include LRSTIF90. This exit appears to be called before and after the report call. I'm not sure if it's a true exit though, as it's just a piece of code in an include and is referred to as an exit? To implement would I just register the object and add in my code?
Any suggestions would be appreciated!
Thanks,
L

FYI the only solution I see is to put in a modification to prompt a selection screen during execution. Modification would go in include 'LRSTIF02' as follows:
PERFORM report_check_obligatory TABLES it_fieldr
 USING flg_obl.
** MODIFICATION **
if ld_tcode = 'FBL3N'.
 flg_obl = 'X'.
endif.
** END MODIFICATION **
IF flg_obl IS INITIAL.
 CALL TRANSACTION ld_tcode AND SKIP FIRST SCREEN.
ELSE.
 CALL TRANSACTION ld_tcode.
ENDIF.
* clear parameter ids
* perform clear_pid_fieldr tables it_fieldr it_dfies.
PERFORM reset_pid_fieldr TABLES it_fieldr it_selpid.
* if flg_return = 'X'.
* call transaction ld_tcode and skip first screen.
* else.
* leave to transaction ld_tcode.
* endif.
ENDFORM.
If anybody has a better idea on how to accomplish this I'd love to hear it!
Thanks,
L

Selection screen for EEA report

Similar Messages

Maybe you are looking for