Selection Screen for Infopackage schedule

Hi Guys,
I want to create a selection screen which appears when a user schedules an infopackage so that the user can enter the posting period, year from and to values and the load takes place for those values.
I want to do this so that the infopackage can be scheduled for what ever period the user enters.
Can somebody please tell me how to write the program/or define BADI with this req?
Thanks

Hello,
To me the easiest is the following :
- Create some variables stored in TVARVC.
- In your infopackage, add routines to read the TVARVC variables values
- Create an abap with some select options.
- Creat a process chain that starts the infopackage using an event and scheduled periodically
This abap's algorithm is quite simple :
update from the select options the TVARV values
raise event that starts the chain (this avoid authorisations problems vers the functionto start a chain)
Hope this help
Best regards
Stephane

Similar Messages

Unable to have field in selection screen of Infopackage

Hello Gurus,
I have a small problem,
I am unable to bring on field in selection screen in Infopackage,
even thou the object is ticket in DataSources selection option,
I have noted that the object is of type DEC is it something to do with,
Or is their any other way to have this object in selection screen of Infopackage,
Please help me on this,
Thanks & Regards,

Bhanu its field type is DEC thats why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didnt work.
or any other way to restrict this field with 1.
I really appreciate your reply.
Thanks Once again.

Transaction code for infopackage scheduling

Hi,
Does any know what the standard transaction code is for infopackage scheduling (other than RSA1)? Is there any other option to by pass the RSA1 code and go to the infopackage directly to upload an external file to the infocube? Any input will be appreciated. Thanks.

Hi,
RSA1 is a standard TCODE for SAP-BI or BW.
As far as my guesses, there was no standard transaction to run a Infopackage....
Instead of using tht still if u need to scedule a package,
1) If ur Infopackage is included in process chains, then u can goto RSPC to the same chain where the infopackage was included and there on the loading step if u rightclick-->display variant.....then it'll goto scheduler window..there u can start...
2) If u have run the same package before anytime and u remember the date, u can goto RSMO and filter according to IP selections and u'll get all the packages run on tht day...
If we execute with tht selection u'll get the monitor of the load..ther from the header tab...in the IP selction u can schedule the same without using RSA1..
But RSA1 is the easy way to trace via data source..
rgds,
Edited by: Krishna Rao on Mar 26, 2009 2:48 AM
Edited by: Krishna Rao on Mar 26, 2009 2:48 AM

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

User presses F4 on the selection screen for the field ''Transport Request"

Dear ALL,
                 I want to build up a functionality in my report where if the user presses F4 on the selection screen for the field ''Transport Request", then it will display all the Transport Requests involving that particular User...
What I mean is the normal process that is provided by SAP on saving an object in a package & assigning it to TR...
How do we Achieve it ?

Hi.
First we need to give the client after that client number related requestes display in second parameter F4 help for that purpose i used two function modules.First for read the client no dynamically after that pass the client number second function module.
then u can get all the request for that client.
DFIELD-FIELDNAME = 'P_MANDT'.
APPEND DFIELD.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = 'Y9EZ_TR_COPYCLIENT'
    dynumb                               = SY-DYNNR
tables
    dynpfields                           = DFIELD
READ TABLE DFIELD INDEX 1 ."WITH KEY DFIELD-FIELDVALUE = 'P_MANDT'.
V_MANDT = DFIELD-FIELDVALUE.
CALL FUNCTION 'TR_F4_REQUESTS'
EXPORTING
IV_USERNAME                   = SY-UNAME
IV_TRKORR_PATTERN             =
IV_TRFUNCTIONS                =
   IV_TRSTATUS                   = 'RNDL'
IV_FROM_DATE                  =
IV_TO_DATE                    =
   IV_CLIENT                     = V_MANDT
IV_PROJECT                    =
IV_TITLE                      =
IV_VIA_SELECTION_SCREEN       = 'X'
IV_COMPLETE_REQUESTS          = 'X'
IT_EXCLUDE_REQUESTS           =
IMPORTING
   EV_SELECTED_REQUEST           = S_TRKORR-LOW.
ES_SELECTED_REQUEST           =
'TR_F4_REQUESTS' This function module for request
Regards
muralii

Selection screen for submit in BSP

Hi Experts,
I have gone throught the link to submit the program in BSP using varients, but i even want to see the selection screen for tht so tht user can post his own values over there.
I tryed SUBMIT with different options but i am not able to see the selection screen for it,pls help me its urgent.
thanks in advance.
Saurabh.

hi,
the submit i have made it the way u told me..before itself..so thts fine..
but value which i get in first.htm of these dates is not getting transfered to the next.htm
thought i am able to get the value through the navigation->set_parameter...
really i feel this issue is bit getting longer....
i guess i used my ful day on it...
thanks for ur great help..but pls let me know is there any proble here in my event handler in first .htm
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
See if upload is triggered from button
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event ?= CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
CASE event->id.
    WHEN 'ok'.
      DATA: date1 TYPE REF TO CL_HTMLB_INPUTFIELD.
      DATA: date2 TYPE REF TO CL_HTMLB_INPUTFIELD.
     date1 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'fromdate'
      IF date1 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date1->value
         IMPORTING
           OUTPUT        = p_date.
      ENDIF.
      date2 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'todate'
      IF date2 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date2->value
         IMPORTING
           OUTPUT        = p1_date.
      ENDIF.
      navigation->set_parameter( 'p_date' ).
      navigation->set_parameter( 'p1_date' ).
      navigation->next_page( 'NEXT' ).
ENDCASE.
ENDIF.
pls help me out expert.
thanks,
Saurabh

Skipping Selection Screen for a report program

Hi guys,
I have a report program that works in 2 modes - Create and modify ( There is a toggle button in the ALV report). Its an editable ALV grid. There are 2 tcodes - zcreate and zmodify to access the same report in 2 above modes. For zmodify, i have a selection screen. How do i skip the selection screen for zcreate ?
Here is my report program
REPORT ZSWR_RCKDVOLS .
INCLUDE ZSWR_RCKDVOLS_TOP.
INCLUDE ZSWR_RCKDVOLS_CLDEF.
INCLUDE ZSWR_RCKDVOLS_CLIMP.
INCLUDE ZSWR_RCKDVOLS_SELSCR. " Selection Options are written in this.
INCLUDE ZSWR_RCKDVOLS_PBO.
INCLUDE ZSWR_RCKDVOLS_PAI.
INCLUDE ZSWR_RCKDVOLS_FORM.
INITIALIZATION
initialization.
perform layout_build.
AT SELECTION-SCREEN
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
                      into lv_plnt
                      where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
END-OF-SELECTION.
CHECK: NOT gi_zswt_rckdvols[] IS INITIAL.
set SCREEN 100.        "Main Screen
A sample code will be greatly helpful.
Thanks,
SHK

So if we were to implement this in your program.....
report zswr_rckdvols .
include zswr_rckdvols_top.
include zswr_rckdvols_cldef.
include zswr_rckdvols_climp.
<b> include zswr_rckdvols_selscr. " Selection Options are written in this ".
* Add this line into your selection screen include.
parameters: p_switch type c no-display.</b>
include zswr_rckdvols_pbo.
include zswr_rckdvols_pai.
include zswr_rckdvols_form.
* INITIALIZATION
initialization.
perform layout_build.
* AT SELECTION-SCREEN
<b>at selection-screen output.
if sy-tcode = 'ZCREATE'
    and p_switch = space.
    submit zswr_rckdvols
           with p_switch = 'X'
                 and return.
    leave program.
endif.</b>
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
into lv_plnt
where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
* START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
end-of-selection.
check: not gi_zswt_rckdvols[] is initial.
set screen 100. "Main Screen
Regards,
Rich Heilman

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

Selection Screen for Infopackage schedule

Similar Messages

Maybe you are looking for