Selection screen for SAP Query: OR between options

Hi,
I have a SAP Query and I need a variant where either of two fields should not be 0. Is there some way to add an OR between two selection options? I can't change the actual query because it's used with many other variants.
Thanks

In abap you can do it, but not sure how you do it in query.
if s_matnr[] is initial or s_werks[] is initial.
Do something
endif.

Similar Messages

Selection Screen for BW Query

Hi,
We have a requirement where, in the Selection Screen of the Query we have to show a Table, the data will be fetch from a Info Object. There will be a last column for taking data from the User.
Once the selection screen is filled and executed Report will be outputed.
This can be achieved in R/3 ABAP by using Table Control on the screen.
but have no idea how this can be achieved in BW.
Can anyone help me out ?

Hi Muthu,
Thanks for replying. Let me explain the scenario little more in detail.
We have a selection screen which will have some slection fields and a table like structure for displaying some values by default. When the execute button is pressed the final report is generated.
There is no link between table structure and the final report except one of the coulmn field is used to derive a flag value in the final report.
The problem we are facing is how the Selection fields and table structure be displayed when the Report transaction is called.
Pankaj

Selection Parameters for SAP Query

I have difficulty in displaying the SAP Query selection parameter in my result screen.
Even the ALV Selection option at the Print dialog is not working in this SAP Query (working for ABAP developed ALV report).
Any help will be much appreciated.

> Yes SAP Query.
> The printing is printing out the SAP Query result, even mentioned in my 1st statement.
> Is my language that bad or you have difficult understanding English?
I have no difficulty in understanding English but in understanding your problem. If someone says only "it's not working" I must ask, what "it" is.
Is your problem the fact, that the selection criteria is not printed if you use ALV but printed if you use an ABAP list? Or is printing not working alltogether?
Markus

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

Issue in transaction code creation for sap query report .

Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.

Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina.

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

User presses F4 on the selection screen for the field ''Transport Request"

Dear ALL,
                 I want to build up a functionality in my report where if the user presses F4 on the selection screen for the field ''Transport Request", then it will display all the Transport Requests involving that particular User...
What I mean is the normal process that is provided by SAP on saving an object in a package & assigning it to TR...
How do we Achieve it ?

Hi.
First we need to give the client after that client number related requestes display in second parameter F4 help for that purpose i used two function modules.First for read the client no dynamically after that pass the client number second function module.
then u can get all the request for that client.
DFIELD-FIELDNAME = 'P_MANDT'.
APPEND DFIELD.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = 'Y9EZ_TR_COPYCLIENT'
    dynumb                               = SY-DYNNR
tables
    dynpfields                           = DFIELD
READ TABLE DFIELD INDEX 1 ."WITH KEY DFIELD-FIELDVALUE = 'P_MANDT'.
V_MANDT = DFIELD-FIELDVALUE.
CALL FUNCTION 'TR_F4_REQUESTS'
EXPORTING
IV_USERNAME                   = SY-UNAME
IV_TRKORR_PATTERN             =
IV_TRFUNCTIONS                =
   IV_TRSTATUS                   = 'RNDL'
IV_FROM_DATE                  =
IV_TO_DATE                    =
   IV_CLIENT                     = V_MANDT
IV_PROJECT                    =
IV_TITLE                      =
IV_VIA_SELECTION_SCREEN       = 'X'
IV_COMPLETE_REQUESTS          = 'X'
IT_EXCLUDE_REQUESTS           =
IMPORTING
   EV_SELECTED_REQUEST           = S_TRKORR-LOW.
ES_SELECTED_REQUEST           =
'TR_F4_REQUESTS' This function module for request
Regards
muralii

Selection screen for submit in BSP

Hi Experts,
I have gone throught the link to submit the program in BSP using varients, but i even want to see the selection screen for tht so tht user can post his own values over there.
I tryed SUBMIT with different options but i am not able to see the selection screen for it,pls help me its urgent.
thanks in advance.
Saurabh.

hi,
the submit i have made it the way u told me..before itself..so thts fine..
but value which i get in first.htm of these dates is not getting transfered to the next.htm
thought i am able to get the value through the navigation->set_parameter...
really i feel this issue is bit getting longer....
i guess i used my ful day on it...
thanks for ur great help..but pls let me know is there any proble here in my event handler in first .htm
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
See if upload is triggered from button
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event ?= CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
CASE event->id.
    WHEN 'ok'.
      DATA: date1 TYPE REF TO CL_HTMLB_INPUTFIELD.
      DATA: date2 TYPE REF TO CL_HTMLB_INPUTFIELD.
     date1 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'fromdate'
      IF date1 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date1->value
         IMPORTING
           OUTPUT        = p_date.
      ENDIF.
      date2 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'todate'
      IF date2 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date2->value
         IMPORTING
           OUTPUT        = p1_date.
      ENDIF.
      navigation->set_parameter( 'p_date' ).
      navigation->set_parameter( 'p1_date' ).
      navigation->next_page( 'NEXT' ).
ENDCASE.
ENDIF.
pls help me out expert.
thanks,
Saurabh

Skipping Selection Screen for a report program

Hi guys,
I have a report program that works in 2 modes - Create and modify ( There is a toggle button in the ALV report). Its an editable ALV grid. There are 2 tcodes - zcreate and zmodify to access the same report in 2 above modes. For zmodify, i have a selection screen. How do i skip the selection screen for zcreate ?
Here is my report program
REPORT ZSWR_RCKDVOLS .
INCLUDE ZSWR_RCKDVOLS_TOP.
INCLUDE ZSWR_RCKDVOLS_CLDEF.
INCLUDE ZSWR_RCKDVOLS_CLIMP.
INCLUDE ZSWR_RCKDVOLS_SELSCR. " Selection Options are written in this.
INCLUDE ZSWR_RCKDVOLS_PBO.
INCLUDE ZSWR_RCKDVOLS_PAI.
INCLUDE ZSWR_RCKDVOLS_FORM.
INITIALIZATION
initialization.
perform layout_build.
AT SELECTION-SCREEN
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
 into lv_plnt
 where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
END-OF-SELECTION.
CHECK: NOT gi_zswt_rckdvols[] IS INITIAL.
set SCREEN 100. "Main Screen
A sample code will be greatly helpful.
Thanks,
SHK

So if we were to implement this in your program.....
report zswr_rckdvols .
include zswr_rckdvols_top.
include zswr_rckdvols_cldef.
include zswr_rckdvols_climp.
 include zswr_rckdvols_selscr. " Selection Options are written in this ".
* Add this line into your selection screen include.
parameters: p_switch type c no-display.
include zswr_rckdvols_pbo.
include zswr_rckdvols_pai.
include zswr_rckdvols_form.
* INITIALIZATION
initialization.
perform layout_build.
* AT SELECTION-SCREEN
at selection-screen output.
if sy-tcode = 'ZCREATE'
 and p_switch = space.
 submit zswr_rckdvols
 with p_switch = 'X'
 and return.
 leave program.
endif.
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
into lv_plnt
where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
* START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
end-of-selection.
check: not gi_zswt_rckdvols[] is initial.
set screen 100. "Main Screen
Regards,
Rich Heilman

Selection screen for SAP Query: OR between options

Similar Messages

Maybe you are looking for