Selection Screen in LSMW

Am using direct input method.
i want to provide user with* Selection Screen* where user will enter Material No.
i have to check whether that material present in MARA table or not.
If that material not present there error message or proceed with LSMW for other changes in MM02.
kindly help with selection screen logic guyssssssssssss

what kind of selection screen do you expect?
in step 5 you can add e.g. a parameter in ___global_data____ section  like this :
parameter: PMATNR like mara-matnr.
if you then execute the step for data conversion this parameter appears along with the usual fields for transaction number.
and in field mapping for material number you add this code to issue a message into the :
SELECT single       * FROM  MARA into wa_mara
       WHERE  MATNR  = PMATNR.
if sy-subrc <> 0.
write: 'material not found' , PMATNR.
endif.

Similar Messages

  • Re: LSMW. adding selection screen

    HI,
    I have to write an conversion program in LSMW
    in the field mapping and conversion rules i have updated the select fields.. but..
    how to change the text element and selection texts
    Thanks in advance
    Guhapriyan

    Hello,
    As the conversion program is a program created by SAP at run time we will not be able to put the selection texts, Since the name of conversion program will be in SAP std., namespace.
    An alternate solution would be to use:
    SELECTION-SCREEN COMMENT 1(20) 'COMMENT'.
    Hope this helps,
    Best Regards, Murugesh AS

  • Selection-screen differ from developement to quality

    Hi All,
    I made one standard report as Z report.In this they used Logical databases.I made the changes in selection-screen by selecting some of the fields as invisible,and i created the request number for the report and i moved it to quality,But there the selection-screen it is displaying the fields which i made as invisible also.I dont want to display these fields.How can i do it. When i check the  screen attributes in developemnt and quality the language only differ.it is 'DE' in development and it is 'EN' in quality.I think this wont be the problem for screen it is displaying now.  Please help me to resolve this problem as soon as possible.
    With Regards,
    R.P.Sastry

    Hi Charlie,
    Thx for this valuable feedback.Just a small question.
    I am in LSMW screen in Developement and with the project/subproject/object entered
    What I understood is that I need to go to Extras>>Export project..Correct ?
    But will it export the entire thing i.e project/subproject/object in the file ? or I need to first goto LSMW workbench menu first then select All project objects which will show me the 3 nodes and then placing cursor on each node I have to export each one..
    I hope I have put up my doubt correctly..
    In short do I need to export/import each node i.e project/subproject/object separately or the action Extras>>Export will export entire thing ?/
    Regards,
    Manoj

  • Selection screen dialog programming

    I have used a selection screen in the dialog programming.
    I have written some code in the at selection screen to display the output on a table control in another screen 1001.
    my problem is that when i try to enter the multiple values for material ,
    it goes to the at selection screen and displays the output again.
    if i write the code in start of selection instead of at selection screen
    it doesnt give any output at all.
    how do i correct this error?
    SELECTION-SCREEN BEGIN OF SCREEN 2000 .
    SELECT-OPTIONS : s_ersda FOR MCHB-ERSDA OBLIGATORY.
    SELECT-OPTIONS : s_matnr FOR MCHB-MATNR.
    SELECT-OPTIONS : s_matkl FOR MARA-MATKL.
    SELECT-OPTIONS : s_ferth FOR MARA-FERTH.
    SELECTION-SCREEN END OF SCREEN 2000.
    at selection-screen.
    statements to fill the output table
    screen containing table control
    call screen 1001

    Friends,
    Req for ABAP HR
    ROLE: SAP HR ABAP DEVELOPER
    Location: TULSA, OK
    Duration: 3 + MONTHS
    REQUIRED SKILLS: SAP ABAP / Dialog and regular / R/3 and HR / Workflow / smartforms
    / ALV / LSMW for HR and R/3 / Modules - MM , SD , HR, PD , PS
    Start Date: 11-12-07
    If interested Please send the cvs to [email protected]

  • Regarding Selection Screen field making display field  in ALV report

    Hi All,
               In ALV Report,  at runtime how can i make the field as Display Field in selection screen .
    Thks & Regds
    Shailesh

    hii,
    Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
    1.demo_dynpro_modify_simple
    2.demo_dynpro_modify_screen
    if tou are using grid,u can refer to foll link
    sequencing / choosing fields in report screen at runtime,
    Display the Columns in the grid at run time
    rgrds,
    Shweta

  • Help Needed in At selection screen output

    Hi Experts,
    I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
    Thanks in advance for all your help.

    example from a checkbox in one of my progs..but you can do same approach with radio butts
    parameters p_test as checkbox default abap_on user-command test.
    at selection-screen.
        if sy-ucomm = 'TEST'.
          perform birth_mnth_chck.
        endif.

  • Help needed in selection screen - Urgent

    Hi Experts,
    I have a selection screen. I have three radi buttons in that selection screen. Based on the selection of the radio buttons I need to activate corresponding selection screen parameters.
    e.g : if radiobutton1 is selected, njo activation needed,
           if radiobutton2 is selected, activate selection screen parameter p_one,
           if radiobutton3 is selected, activate selection screen parameter p_two.
    All three radiobuttons are attached to the same radio button group.
    I have assigned the parameters p_one, p_two, p_three to MODIF ID as follows.
    p_one - NULL
    p_two - t01
    p_three - t02.
    on the selection of a radio button I want the corresponding parameter to get activated.
    please help me.
    Regards,
    Arul jothi A.

    hi
    jothi
    AT SELECTION-SCREEN OUTPUT.                                      
      CASE SY-TCODE.                                                 
        WHEN 'ZEDI6'.                                                
          LOOP AT SCREEN.                                             
            CASE SCREEN-GROUP4.                                      
              WHEN '001'.                  "Sales order select       
                SCREEN-ACTIVE = '1'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
              WHEN '002'.                  "Delivery select          
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                        
              WHEN '003'.                  "Invoice select           
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
              WHEN '004'.                  "PO Select                
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
    regards
    praveen

  • Compare the input filename in the selection screen

    In the selection screen input field
    there is an option of selecting the directory and file name and not the extension .
    This is used to download the datas
    Extension can be selected by using the option button
    rtf
    csv.
    the user has to give only  the filename and not the extension.
    suppose if the user input is C:\temp\file1.rtf.
    Either i should take only the filename
    or i should display the message give only the filename and not the extension . its already been selected!!!!
    I want to compare the input string contains  .doc
    how to do the comparison and to get the above results mentiond
    Thanks in advance

    Because the requirment is there are two option buttion for selecting the download file format
    But unknowingly if the user gives the filename along with the extension. I need to handle that error
    giving some error message or information message
    By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
    so how to do that
    then after comparing that i should give the user a msg doc type is already selected give only the filename
    I hope u understand my req

  • Change selection screen in LDB (KDF logical database - NOT HR)

    Hi All,
    Iu2019d like to use KDF logical database to keep the dynamic selections since user wants to use it but I need to change the selection screen itself. The existing variants for KDF donu2019t meet the user requirements. Some fields I need to hide some add. Like I want to u201Cremoveu201D the field u2018Posting periodu2019 (MONAT) (which is available in dynamic selection screen) and put it on the u201Cmainu201D selection screen.
    Do I need to create my own logical database or there is a way around?
    Could someone give me a practical advice or sample of solution?
    Thanks a lot.

    Thanks Himanshu,
    I did as you suggested but problem is that it does not allow me to hide the whole block.
    I have 3 filelds actually on block KD_0 I need to hide (its from selection screen of KDF logical database.)
      SELECT-OPTIONS: KD_LIFNR FOR LFA1-LIFNR MATCHCODE OBJECT KRED.
      SELECT-OPTIONS: KD_BUKRS    FOR  LFB1-BUKRS.
    SELECTION-SCREEN END OF BLOCK KD_0.
    PARAMETERS KD_INDEX AS SEARCH PATTERN FOR TABLE LFA1.
    What I did is below.  I used sp instead of  u201C=u201D since it has many screen for field KD_LIFNR(for frame, text etc).
    And when I did just for KD_LIFNR it was hidden but when I did the same for KD_BUKRS it was not hidden . The field has stars u201C*********u201D in it.
    Same happen with KD_INDEX. The name of the field is hidden but field not and it filled with ********. Do you have any ideas what it can be?
    I debugged it to catch all screen names but no luck
      loop at screen.
        if screen-name cp 'KD_LIFNR' or
        screen-name cp 'KD_BUKRS' or
        screen-name cp 'KD_INDEX' or
        screen-name = '%B000003_BLOCK_1000' or       
        screen-name = 'SSCRTEXTS-FRAME_TEXT' or
        screen-name = 'SSCRTEXTS-MCID_TEXT' or
        screen-name = 'SSCRTEXTS-STRNG_TEXT' or
        screen-name = 'SSCRFIELDS-SEARCH_BTN' or
        screen-name =  '%B025008_BLOCK_1000' or
        screen-name =  '%F021010_1000' or
        screen-name =  'ALCUR' or
        screen-name =  '%F022012_1000' or
        screen-name =  'EXCDT' or
        screen-name = 'SSCRFIELDS-UCOMM'.
          screen-invisible = '1'.
          modify screen.
        endif.
      endloop.

  • How to define our own selection screen for logical database  in abap-hr?

    Hi Friends,
    Can u please help me
    How to define your own selection screens for  logical database.
    we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using  customer table like t599c, t599f and how to add to my logical database?
    Thanks in advance
    charan

    check out this online help
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
    Regards
    Raja

  • Need to restrict selection screen entries in logical database in HR report

    After creating custom HR Report Category using Logical database, I need to restrict the options available in the in the selection Screen
    for example- for company code i m getting 182 entries, but after running the program, selection-options for company code, i need only first 3 entries, don't want remailing entries
    how can i do this?

    Hi
    You can retrieve the required entries into an internal table and use FM F4IF_INT_TABLE_VALUE_REQUEST to provide them under F4 help.
    Regards
    Raj

  • Selection Screen in Report Painter

    Dear Experts,
    I have an issue in the report painter. While executing the report from GRR2, selection screen is not displayed but report is coming as I expected.
    I want to create the selection screen for this report. I have created this report without copying from the standard report.
    Thanks in Advance.
    Regards,
    Aswimn

    Hi,
    Please refer following links.
    <Link farm removed by moderator>
    Regards,
    Renuka S.
    Edited by: Vinod Kumar on May 25, 2011 10:12 AM

  • HR ABAP - PNP selection screen

    Hi Friends,
    I am executing the standard report with PNP logical database .
    But in the selection screen when I click on further selection and select the parameter company code.
    Now I entered the company code "0060", but I am getting the out put for both company code 0060 and 0020,
    here I need the out put only for the person which are belongs to company code 0060, but I think the selection screen company code was not controlling the out put.
    Also I checked the Infotype internal table p0001, here I am able to see both the company codes, and for that person the process is continuing and I am getting the out put for the company code 0020, bcz the current/valid record for this person is 0020.
    Request to let me know any issue there?
    Magesh.S

    Hi,
    You need to set "person selection period" dates, in order to list values with selected parameters.
    Daniel

  • Logical database : user defined selection screen

    Hi Experts,
                 I am working with HR-ABAP. The logical databases provide a selection screen......but i want to use a selection screen of my own and not that of the LDB.
    Plz help...............

    hi do like this....
    go to attributes-->hr report catagory-->master data...here use the value _____000(5underscores and 000 )..
    you wii get that..
    regards,
    venkat

  • Logical database sdf in custom program not triggering selection screen?

    I added logical Database SDF (screen 905) to a custom program - but the selection screen is not getting triggered.
    Do I have to associate these somewhere?
    Thanks,
    Ven

    HI,
    Declare this statement after the Report Statement in the program.
    TABLES : SKA1, SKB1.
    You will get the selection screen now.

Maybe you are looking for