Selection screen is missing when query is executed
Hi Friends,
I am running a query and it gets executed without showing the selection screen. Here it is how I am running the query:
1. Go to Business Explorer (3.x)-->Analyser(3.x)
2. IT ask for SAP Log on
3. I choose system which is 7.0
then it runs without showing any selection screen.
If I run the same query in 3.x system it shows the selection screen and all.
Any idea about it???
Your help will be appreciated in terms of points.
Thanks
Hi,
We have the same architecture (3.x BEx Explorer and BI 7.0) and we have no such problems (we are at SP 15).
It could be due to the personalisation of variables (if all variables are personalized).
On the other hand it could be the SAP error, have you tried to search for the problem in OSS?
Regards,
Kirill
Similar Messages
-
Variable screen doesnot appear when query is executed
Hi All,
We recently upgraded the BW 3.1 to 2004s(BI 7.0).
When i am executing the query, the selection screen is not popping up.
Instead the query is executing with default selection.
I am facing problem when there are any mandatory fields.
I appreciate your help,
Thanks,
Joseph.Hi,
the variable is checked 'ready for input'
it is used in a formula
actually it is appearing for some users with BI_ALL auth,
but were trying for some test users the variable screen is not appearing.
even 'change variable value' to remove any personalization is not working from test user.
and for BI_ALL users at change variable screen if we remove personilization, the following error is comming
An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neit
Program GP3T375QSSYZZ29YGQVGFUV7OO2 does not exist
Thanks,
Joseph -
KDMAT need to be included in the current VA01 selection screen or list when
Hello SAP SD Consultants,
Please help me with below requirement or what user exit should we use to implement below requirement. I have discussed with with ABAP and gave some User exits that has related description, however, ABAP confirmed that none of below UE suits the requirement.
1. AD010002 - Delimit selection and/or filter data that is determined
2. CLCLRS01 - Additional Fields on the Result Screen
3. CLCLRS02 - Fill the Additional Fields on the Result Screen
4. V60P0001 - Data provision for additional fields for display in lists
5. WVLB0001 - Display additional data in subscreen for simulation list
Thus, kindly help us on how we can proceed with this.
000----
Requirement:
The field u201CCustomer-material numberu201D or field name KDMAT need to be included in the current VA01 selection screen or list when creating sales orders with reference from a contract.
Currently, customer have its own description or material code to classify or define the product they want to order which are sometimes not exactly the same as the material number maintained in the system or the product / material code used by the Company for sales. These material descriptions were manually entered in the system thru the use of customer-material number field or KDMAT. When sales orders or contracts are created for certain or specific customers, the user or the person who creates that contract / order manually inputs the description in the customer-material number field.
The said entry should also be seen in the Selection List for Reference Document. The transaction to be modified is VA01 under program screen SAPMV45A specific to screen number 4413.
Test Data used:
Reference Transaction: VA41 (create contract), VA43 (display contract)
Order Type: ZCQ (example)
Contract No. 40000040
Transaction: VA01
Order type: ZOR (example)
Contract No. 40000040
a. Go to tcode VA01, input the order type ZOR, click the button CREATE with REFERENCE.
b. Input the reference contract document, since our reference doc is a contract, go to tab CONTRACT and input the contract no..
Expected output:
Upon inputing the contract no. in the contract tab, click u201CSelection Listu201D.
The customer-material number or KDMAT should be included as one of the field and should be displayed in the Selection List for Reference Document window.
Edited by: ria sumagaysay on Mar 26, 2010 11:30 AMHello,
Thank you for the responce.
The reason why they want to reflect KDMAT in the selection list is that, during order creation, not all materials or KDMAT will be ordered by that customer, only specific materials. However, during order processing, the customer only gives the details of the KDMAT. Thus, if there are around hundreds of items inside that contract, the sales personnel who creates the order needs to exclude those material not included in the customer order list manually via checking table VBAP and compare the material code from the selection list.
This is very tedious on their part and commonly caused human error, however, when the KDMAT field is available, although the process has manual intervention, it will serve them well and lessen the burden. -
Claim Search Customizing - Selection Screen Is Missing (FS-CM)
Where customize this one in SPRO? Transaction ICL_EXPERT_1
"For Search 0001_ICLEXPERT (Search Appl. ICL), the Definition of the Selection Screen Is Missing in Table TIGN221"Note 915108
-
Wrong sequence in selection screen generated by ABAP Query
Hi,
I am developing a query to display the data in the view.
My query has 8 selection fields totally.
As part of my requirement I have added selection parameter in the
selections tab of the infoset and maintained the sequence as 9.
Inspite of maintaining the sequence number as 9 in the infoset, It is
appearing first in the selection screen of the query.
I tried putting different numbers in the sequence number, but even it
is appearing first in the selection screen.
Can you please let me know how to display the selections declared in
the infoset as per the sequence required.
Thanks,
Madhuri.Actually what happen when you declare your own fields in ABAP query . you have to care about the sequence . As an example if youre selecting lets say state name , you have two variables
<b>1-state
2- land</b>
for state you have to select land first , if your state is first and land is 2nd it gave you the error of sequence .
Because you have to get data in land first in order to get state specific to the land .
it should be
1-Land
2-State
Just see the your fields , Im sure youre missing that .
<b>You can also see the NO ( field ) in Query ( Sq03 ) . where you can define the seqence on selection.</b>
hope thisll help you .
Pl...Award the points .
Thanks
Saquib<b></b>
Message was edited by: Saquib Khan -
Analysis Authorization : Selection screen not appearing for query
Hi,
I am facing an issue with analysis authorization. I have created the new roles and assigned to the users. For one user when I am executing the query, the selection screen is not coming up and it shows error message to specify the variables. Whereas its running for all other users.
In S_RS_COMP I have selected Type of a reporting component as Query View, Query & Template structure. I also tried adding Variable in this field but that also did not help.
Please let me know if you have faced similar issue.
Regards,
ManishHi,
Go to your query desinger opend your query and select your variable in that you have see first "Ready Input Query" Check box is selected or not. It's not selected you can select that check box.
Your problem will be sloved.
Thanks & Regards,
venkat. -
Selection screen texts missing
Hi friends,
I am working on a BDC program and when I execute my program, I see that the texts are missing in the selection screen. Can anyone tell me what should be done in order to display the texts in the selection screen in BDC.
Thanks,
RAJ.Hi Raj,
1. i suppose u are using
include bdcrecx1.
2. Due to this,
u will have to MANUALLY
type them / enter them
thru the menu GOTO-->TEXT ELEMENTS
3. Since its an include,
the system does not automaticlly recognise it.
4. However, u can check FROM DICT Option.
5. Those which are manual,
u will have to write them / enter them.
regards,
amit m. -
BEx web report selection screen entries retain when closing and opening the report again
Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now. -
At selection screen output problem when a field is obligatory
Hi All,
I have two radiobuttons on the selection screen and when I select first radiobutton one screen should display and the other should not be displayed and vice-versa. It is working fine if I do not have a mandatory field.I am pasting my code here.Can anyone please help me how to handle this situation when we have some mandatory fields on one of these screens.
TABLES : mara,marc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_meth1 RADIOBUTTON GROUP g1 USER-COMMAND g1,
p_meth2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK matnr WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_matnr FOR marc-matnr MODIF ID m1 obligatory.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_werks FOR marc-werks MODIF ID m1 .
SELECTION-SCREEN END OF BLOCK matnr.
SELECTION-SCREEN BEGIN OF BLOCK file WITH FRAME TITLE text-003.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_fpath TYPE ibipparms-path MODIF ID m2 LOWER CASE.
SELECTION-SCREEN END OF BLOCK file.
SELECTION-SCREEN BEGIN OF BLOCK date WITH FRAME TITLE text-004.
SELECTION-SCREEN SKIP 1.
PARAMETERS : p_date TYPE datuv.
SELECTION-SCREEN END OF BLOCK date.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CASE screen-group1.
WHEN 'M1'.
IF p_meth1 = 'X'.
screen-active = 1.
ENDIF.
IF p_meth2 = 'X'.
screen-active = 0.
ENDIF.
WHEN 'M2'.
IF p_meth2 = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
IF p_meth1 = 'X'.
screen-active = 0.
ENDIF.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
Thanks in advance
SandeepObligatory fields with your requirement will not work, reason : The GUI checks obligatory fields before passing the control back to the program (i.e Before triggering the PAI )
If you check for empty fields and give appropriate error message in the PAI, the program will not allow you to switch to the other radio button until you fill something in the fields because the moment you select a radiobutton, it will validate the field and issue the error message.
So it is like a catch 22 situation.
All you can really do is to check see which radio button is clicked and then do your processing. Also make sure to assign a user command to the radiobutton and query it in the AT SELECTION SCREEN and based on the radiobutton selected, decide which fields should be validated.
" Additon...
INITIALIZATION " Default values
p_meth1 = 'X'.
AT SELECTION-SCREEN. " General PAI
if p_meth1 EQ 'X'.
"validate fields for meth1.
elseif p_meth2 EQ 'X'.
" validate fields for meth2.
endif.
regards,
Advait -
Get selection screen parameters from sap query
Hello. I use SAP Query Reporting, so I added a report assignment for detailing (sq01 -> Change button -> Goto -> Report Assignment -> Insert row -> Other type row -> Abap Report Program)
and put there ABAP program.
When I run query and press CtrlShiftF1 (or double click) It calls my abap program.
So the question is: how to get selection screen parameters in my program ?
to be more precise I want to get date parameter (begda, endda)
Thanks a lot.There is a Z query which I can see in sq01. I set reporting period and run the query; when I run it, it gives me the employee list.
So I wrote the abap report to get an employee details, customized query as I mentioned above.
The query calls my report and I need to get parameters.
SELECTION-SCREEN BEGIN OF BLOCK frm1 WITH FRAME TITLE text-001.
PARAMETER : p_pernr LIKE p0001-pernr OBLIGATORY MATCHCODE OBJECT prem.
PARAMETER : p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK frm1.
Parameter
p_pernr
passes normal. ALV Query contains it, but I'd like to get one more parameter from selection screen of the query and don't know how to get it. -
Selection screen in the target query RRI
Can I get a selection screen when I am drilling down from source to target query.
Thanks,Dear Gokul,
I would suggest you to go through Note 1053310 as this will answer your query.
regards,
arvind -
Additional field in selection screen of a abap query
Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.SubasreeHi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet -
Selection screen fields in SAP Query
HI friends,
I have to make the seletion screen field as mandatory in SAP-Query.
Please let me know the procedure to make field as mandatory or Let me know how to validate the selection-screen field in Query.
Thanks in Advance,
RaviGo to SQ02
Select your Infoset-->Change
On next Screen.
Select GoTo->Code->Initialization.
Write there code
LOOP AT SCREEN.
IF screen-name EQ 'SP$00004'.
screen-required = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
Selection-screen problem only when in SE80
Hi Folks,
I am getting the following information message when the the element SCREENS is double clicked in the SE80's container.
Element %_R1_%_APP_%-TEXT touches or overlaps
other element
The program is running fine without any error.I want to know why such an info message is getting popped up and how to avoid that.
Thanks,
K.Kiran.Hi,
Open the Selection scree in SE51, double click on 1000 screen in SE80 and then click on the layout button to open the screen.
Then there check out the screen element for which you are getting the error.
Then adjust its size and check if this error is still coming.
According to me this Screen element corresponds to SELECTION-SCREEN COMMENT statement in the program, you might have given the length of this text there try and reduce the length there and see if this error still remains.
Generally we should not modify the Selection-Screen's in SE51 as they will always get regenerated when ever you activate the program and your changes will be over written.
So try to play around with SELECTION-SCREEN statements only in the program, what you can get from SE51 is what this SCREEN ELEMENT corresponds to in the program.
Regards,
Sesh -
Selection screen to appear when user clicks on radio button
hi
i have severla radio buttor in a radio button group
i want that whne user clicks on first radio butter selection scren 1 eg as below to apper
when use clicks on radio buton2 selection scree2 will appear please suggest
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE
text-008
PARAMETER : fyr2_fy type FIMC-RYEAR default 2008,
fyr2_cg type FIMC-CGYEAR default 2008,
fyr2_bk type FIMC-PERID default 7.
SELECTION-SCREEN END OF BLOCK B1.
regards
aroraHi,
At selections screen on that radiiobutton group.
if radio_button1-status = 'X' (Active)
call screen 'scereen number' or set screen 'nuymber'.
else.
call screen...
endif.
Reward if helpful.
Best Wishes,
Chandralekha
Maybe you are looking for
-
Rounding of a field in Internal table
Hi , I have a quantity field(menge) in an internal table( i_tab) . In a loop at the internal table(i_tab) , I want to round off the quantity to x decimal places . 'x' will be different for each record , depending on some logic. Through what syntax d
-
Can anyone tell my how I can print/create a pdf from my printer - I used to be able to & now I can't it doesn't give me the option anymore
-
Problem with one table taking a long time to query.
We have one table with around 6000 rows and 30 columns. It has 1 primary key, 5 indexes, 2 foreign Keys select primarykeycolumn from table it takes 0.003 seconds. If we add a where clause on an indexed column it takes 0.003 seconds approx. If we add
-
Office for Windows files won't open on mac
Why won't Word documents and Excel files created on a Windows machine open on my new MacBook Air? I never had this problem on my old MacBook Air. I'm running Mavericks and all software up to date.
-
CachePolicy not working - Bug?
Hello all, I am currently trying too build a simple maping app in Flex 2. The application consists of 1 SWF map and a Canvas that hosts that SWF. The SWF loader is working perfectly, and dragging the SFW across the Canvas works also. The problem is t