Selection screen problem in module pool

Hi friends,
I am working on module pool programming, I need to put select screen on the screen of the module pool porgramming. I used Input/Output field to do that and activated. But I am getting message invalid field format (screen error) can any one tell me why I am not able to run the seletion screen when I am using input/output field, also please let me know how to solve this problem.
Regards,
Line

Hello,
Think that this is useful for u/
SELECTION-SCREEN - Defining selection screens
Variants:
1a. SELECTION-SCREEN BEGIN OF SCREEN scr.
1b. SELECTION-SCREEN END OF SCREEN scr.
2. SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
Effect
Defines a selection screen with the number scr. scr may be up to 4 digits.
SELECTION-SCREEN BEGIN OF SCREEN scr.
Additions:
(zu SELECTION-SCREEN BEGIN OF SCREEN scr) 1. ... TITLE title
2. ... AS WINDOW
Notes
In reports (type 1 programs), a selection screen with number 1000 is created automatically when you use the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statments. This selection screen appears when you SUBMIT the report.
In any type of program (apart from subroutine pools - type S), you can define further selection screens using SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN. You enclose these statements between the SELECTION-SCREEN BEGIN OF SCREEN and SELECTION-SCREEN END OF SCREEN statements.
You call these screens using the CALL SELECTION-SCREEN statement.
Screen number 1000 is not allowed (reserved for standard selection screen).
When you generate the program, all user-defined selection screens are also generated.
Within a report (type 1 program), all SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements outside a SELECTION-SCREEN BEGIN/END OF SCREEN block form part of selection screen 100 (standard selection screen)
Regards,
LIJO JOHN.

Similar Messages

Select-options Problem in module pool

Hi,
I have created select-options in a seperate program and i have called the subscreen in module pool program.
I dont have any problem with the display of select-options but whatever the value given is not getting in to the program. Hw to solve this problem
Assured Points
Thanks in Advance
Jai

hi,
did you declare that in top include?
if not declare it globally.
In stead of subscreen, try to do with screen itself.
Create screen like this.
selection-screen begin of screen 300.
selection-screen begin of block b1 with frame title text-000.
select-options : so_ebeln for v_ebeln modif id g1,
so_vbeln for v_vbeln modif id g2.
selection-screen end of block b1.
selection-screen end of screen 300.
Call this screen : in PAI of ur another screen.
call selection-screen 300.
Regards
Sandeep REddy

Selection screen processing in Module pool

Dear Friends,
I am preparing a module pool, in which from one screen, i have to call a selection screen. I want to define this selection screen in the same program. Under which event block, i can define this selection screen?
Once its called, how can i process the selection screen ( like START-OF-SELECTION etc ?). If i use a LEAVE TO LIST-PROCESSING to display some output, how can i process the user actions in this list?
Thanking you in anticipation.
Deepak

HI Max,
Thanks a lot for your reply. It was really helpfull. But my problem is not yet solved.
When i call the selection screen from the PBO of a screen, the selection screen is not being displayed. Only the blank screen is displayed. So i tried another way. I put the CALL SELECTION-ECREEN statement in the USER_COMMAN_100 module of PAI of the previous screen. (ie when user choose a button from the tool bar, in the initial screen the selection screen will be displayed.)
module user_command_0100 input.
OK_SAVE = OK100.
CLEAR OK100.
CASE OK_SAVE.
    WHEN 'LIST'.
      CALL SELECTION-SCREEN 200.
      IF SY-SUBRC = 0.
        PERFORM PROCESS_LIST.
      ELSE.
        leave screen.
      ENDIF.
endmodule.                 " USER_COMMAND_0100 INPUT
form process_list.
... reading database...
IF SY-SUBRC = 0.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
SET PF-STATUS 'GUI_LIST'.
    LOOP AT ITAB.
      WRITE :/ ITAB-BUKRS, ITAB-BELNR, ITAB-GJAHR.
    ENDLOOP.
LEAVE SCREEN.
ENDIF.
endform.                    " PROCESS_LIST
Now i have two problems to solve.
1. I want to come back to the same selection screen (screen no 200) instead of screen 100, when the user click 'back' button in the list. but if i specify screen no 200 in
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
it gives runtime error. ( Msg: Selection screen ZTEST3 0200 was not called using CALL SELECTION-SCREEN). How to return back to selection screen?
and
2. If the user selects a line from the list(PICK/F2), that value has to be passed to the input field of first screen( ie the initial screen from where i called the selection screen : screen no 100) For this, where can i write the code to process the user actions in the list?
Thanking you in anticipation
Deepak

Screen problem in Module pool program

Hi all,
I have developed a module pool program, in which i have used simple selection screen and after executing it will call screen 9001 to display the data. everything is goin fine but if i leave my output screen as it is for some time (or even if i lock my system then unlock it) i am getting an error message
"Selection screen ZDEV1110PGM_SF 1000 was not called using CALL SELECTION-SCREEN".
do any one have idea why this is happining without doing anything further to the output.
Regards,
Nilanjana

Have you used CALL SCREEN ?
Regards
Abhii

Leaving to Selection Screen in a Module Pool

hi,
I have a module pool with a number of screen.Now ifi am on the 4 th screen after i process something i need to go back to the selection screen. Giving leeve to screen 1000 doesnt work.Could neone please tell what command must be written.

Hello Pankaj,
U can try like this.
SET SCREEN 0.
LEAVE SCREEN
or
LEAVE TO SCREEN 0.
If useful reward.
Vasanth

Problem in creating a Select-option im a module pool screen

I've been searching how to do a select option in a module pool screen, I've found this neat tutorial http://sample-code-abap.blogspot.com/2008/06/select-option-in-module-pool-screen.html
but I'm having trouble to replicate it...
I've created this conde in my TOP include
SELECTION-SCREEN BEGIN OF SCREEN 201 AS SUBSCREEN.
   SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 201.
and this is my screen flow code
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE pbo_200.
PROCESS AFTER INPUT.
MODULE pai.
MODULE user_command_0200.
in the screen 200 I have a subscreen area named subs
but when I do this:
MODULE pbo_200 OUTPUT.
CALL subscreen subs including sy-repid '0201'.
ENDMODULE.                 " pbo_200 OUTPUT
it doesn't "compile"
it gives me this error:
""." or "ID ... FIELD ..." expected after "SUBSCREEN"."
what am I missing? it seems its not recognising the "CALL SUBSCREEN" command...

you can't use CALL SUBSCREEN... in any ABAP section. It is reserved to dynpro flow logic. Just add it after PROCESS BEFORE OUTPUT (and also after PROCESS AFTER INPUT).

Selection-options on a module pool screen

Hi all,
How to define a field as selection-options on a module pool screen.
Thanks,
Chuong

Hi Chuong,
You will need to define the screen as a selection screen..
Else, you can define a subscreen area in your screen, define a subscreen as selection screen and call that screen here..
Thanks and Best Regards,
Vikas Bittera.

Problem in Module Pool Program

Hi All,
I got one problem in Module pool program.Im using table control.when selected multiple coloms by table control option left top.
when I want to de-select one by one,unable to de-select. Please suggest me.
thank you,
Anu.

Thank You All.
Solved my self.
The coding as below.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB INCLUDING SY-REPID '110'.
LOOP AT GT_ITAB INTO WA WITH CONTROL VCONTROL.
    MODULE SET.
    MODULE STATUS_0100.
ENDLOOP.
PROCESS AFTER INPUT.
   CALL SUBSCREEN SUB.
LOOP AT GT_ITAB .
    CHAIN.
      FIELD WA-EBELN.
      FIELD WA-EMATN.
      FIELD WA-EBELP.
      FIELD WA-MATNR.
      FIELD WA-MARK.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
    MODULE USER_COMMAND_0100.
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'SAVE'.
      PERFORM SAVE_VARIANT.
      PERFORM VARIANT_EXISTS.
    WHEN 'SEL'.
      LOOP AT GT_ITAB INTO WA.
        WA-MARK = 'X'.
        MODIFY GT_ITAB FROM WA .
      ENDLOOP.
endmodule.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTESTING'.
SET TITLEBAR 'ZTEST'.
SET PF-STATUS 'ZTESTING' EXCLUDING IT_EXTAB.
MOVE:WA-EBELN TO EKKO-EBELN,
       WA-EBELP TO EKPO-EBELP,
       WA-MATNR TO WA-MATNR.
MOVE:WA-EMATN TO WA-EMATN.
MODIFY GT_ITAB FROM WA INDEX VCONTROL-CURRENT_LINE.
VCONTROL-LINES = SY-DBCNT.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE SET OUTPUT.
SET CURSOR FIELD CURSORFIELD OFFSET POS.
ENDMODULE.                 " SET OUTPUT
Thank You,
Anu.

Regarding screen flow in MODULE POOL

Hi everyone,
my requirement is to cretae a module pool program. In between a program is submitted VIA a selection screen. That selection screen contains PUSH BUTTONS. If any push button is clicked one of the dialog screens of the module pool program should be called. Can any one tell me how can this be done.
Thanks in advance.
Regards,
Y.Gautham

write a Module in PAI of ur screen and call which ever screen u want to call or leave.
for e.g -
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
module USER_COMMAND_0100 input.
case ok_code.
when 'ENTER'.
clear ok_code.
leave to screen 200.
endcase.
endmodule. " USER_COMMAND_0100 INPUT

Regarding select option in a module pool prog .

hello .. i need some help regarding select options in a module pool program .. i hav tried putting a select options in a module pool prog but i am not able 2 ... can any one tel me why select options r not aloowed in a module pool prog ?? and i read that we hav 2 use ranges 2 fulfil the needs of the select options . is there any way i cal get all the functionality of select options ( eg including , excludig , equal to , not equal to , .... .) using a range ??

Hi
Select-options won't work if you declare the program as Module POOL.
if you wants to use select-options like utility in module pool programming
use ranges
declare and develop ranges and use that in select statement where condition.
ranges: r_vbeln for vbak-vbeln.
r_vbeln-low = '0018900678'.
r_vbeln-sign = 'I'.
r_vbeln-option = 'EQ'.
append r_vbeln.
r_vbeln-low = '0018900456'.
r_vbeln-sign = 'I'.
r_vbeln-option = 'EQ'.
append r_vbeln.
reward if useful
regards
Anji

Customer Control in screen painter in Module pool - work like container?

Customer Control option in screen painter in Module pool - work like container?
is it true? How?
Is like any work area or what?
what is the excat use of that option?
regards.

Hello,
In screen painter ,custom control is used to define the control area on the screen.Just click on that and make your own container area.When you create an ALV grid or TEXT EDITOR or any other control,it will get attached to the screen in that area through the custom container.
Name the container area as say 'CONTAINER'.(in capitals.)
When you actually create the custom conatiner programatically,you should give the container area name.ie.
Data : cont type ref to cl_gui_custom_container.
Create object cont
exporting
parent = 'CONTAINER'.
Now,this container that you created-cont is attached to the screen in the area defined by CONTAINER.
Regards,
Beejal
**Reward if this helps

Adding a screen element in Module pool

Hi Experts,
How to add a screen element in module pool programming?
Thanks,
Sudha...........

Hi sudha ,
To add screen elements in you module pool programming ,
i > Go the layout of the screen for which you want to have elements .
ii> Drag and drop the available elements from the left hand side .
iii> Be sure to have a name a name of the data elements that you have inserted .
iv>Check any dataelement is't showing red in color as red color signifies error .
v> Make sure to save and activate the layout.
Hope this would be clear .
Thanks
Lokesh

Difference between screen painter and module pool

Hi guys,
what's the difference between SCREEN PAINTER and MODULE POOL ....
can anyone plz give brief description ...
regards
venu

hi ,
As its said by many colleagues in SDN , there are not very major differences between Modulepools and screen painter .
The few differences are :
1) Module pool is nothing but a pool ( series ) of screens . and Screen painter ( SE51 ) is a tool used for creating/designing screens .
2) While creating a modulepool you even need to create a transaction and assign this module pool program else the mpool program doesnt work . I think this is place we can say they are different .
3) If at all you create a screen in screen painter ( SE51 ) , that doesnot function by its own , you need to assign it to any of the executable programs or modulepool programs .Here is again a difference .
Regards,
Ranjita ..
Message was edited by:
Ranjita Kar

Selection OPTION: Date input problem in Module POOL through Subscreen

Dear ALL,
Being new to ABAP, I am struck in a Problem.
Requirement:
I want an option on the Screen( My Screen 9000) for Date Range. Through this Date-Range I want to filter and pull some data from
Database.
As Date Range Selection option is possible only through Sub-Screen integration. Hence I integrated a Sub-Screen 400 (as below) and named the Sub-Screen area as SEL on my screen.
Problem: As soon as I enter the dates on the screen, then those dates are not taken up by the code.
During debugging I saw the the S_datum-low and S_datum-high are empty (in fact 00000000)
The code follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
Call SUBSCREEN SEL INCLUDING sy-repid '400'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9000.
DATA: gv_datum     Type   dats,
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
    SELECT-OPTIONS: s_datum FOR gv_datum.
SELECTION-SCREEN END OF SCREEN 400 .
Plz help where I am missing something.
Regards
Chandan

Call the subscreen during the AT SELECTION-SCREEN event.
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECT-OPTIONS: s_datum FOR gv_datum.
SELECTION-SCREEN END OF SCREEN 400 .
AT SELECTION-SCREEN.
   CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
   SET PF-STATUS '0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
   CASE sy-ucomm.
     WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
       LEAVE TO SCREEN 0.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT

Problem in Screen field position ( Module pool )

Hi Experts,
We changed the screen field position ( GUI ) of SAP standard module pool program. we had taken the access key from SAP and modified the layout.
Our Problem : We had transported these change request to Quality and Pre Production. The changes are transferred correctly in Quality . when coming to Pre Production the changes are not visible on the screen.
Checks Performed : 1. We had analyzed the Transport request - They are imported correctly.
2. We had rechecked the layout that we had changed its good and correct.
Can you experts help me out in identify the exact solution for this problem.
- Best Regards,
Sudhakar Puppala
Edited by: CRM Sudhakar on Sep 16, 2010 11:25 AM

Hi, no idea can be given without having a look..
but just check the screen layout in the pre-production itself..instead checking transport..

Selection screen problem in module pool

Similar Messages

Maybe you are looking for