Selection screen's variant (global level) - what is the tcode for this

Hi all,
I need to know what is the transaction code that maintains ABAP program's selection screen variants at global level.
More information : the transaction code that maintain program's selection screen variants at global level.
Thanks.
William Wilstroth
Message was edited by:
william wilstroth
Message was edited by:
william wilstroth

Hi William,
If you mean program variants, they are maintained in SE38 - enter the program name and then select the "Variants" radio button. If you mean transaction variants, the transaction code is SHD0.
MJ

Similar Messages

What is the tcode for creating a variant ??

Dear Guru,
I want to know What is the tcode for creating a variant which is being used for SM30 's variant option .
Because we have created a maintenance view and we want to run this trhough tcode..
but dont know how to do it.
pls guide through out the procedure.
thanks & regards
Saifur rahaman

Hi,
If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
Go to SE93
Give your Tcode
Click Create , select parameter transaction Radio Button
In the Transaction Field Give SM30
Check the Check box SKIP INITIAL SCREEN
select your GUI support and SAVE
in the space provided give F4
Select VIEWNAME and give your table name
Select UPDATE give it as X
then SAVE
Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

What is the tcode for plant wise g/l account list

Dear Experts
Can you help on this "what is the tcode for plant wise g/l account list"
Regards
B

Hi Bhaskar,
G/L accounts wont be plant wise.It will be either chart of accounts level or compant code level.
The best thing you can do is to derive the company code for the plants from the table T001K assuming the valuation level is at plant level.
Now after deriving the company code go to transaction SE16 and give the company code derived above in the table SKB1 and generate the G/L account list.
Hope this is clear if not please clearly explain more elaborately on the exact requirement why you need plant wise g/l account list for appropiate solution.

What is the TCODE for number change of idoc

Hi all,
can anyone help me in chnaging the number range of IDOCS in R/3 system..
what is the TCODE for that...
Thanks in advance.
Cheers,
Raghavesh

Hi,
Please go to transaction SNUM/SNRO and use object EDIDOC.
Select number range and change to specific number that you wish.
Hope this will help.
Regards,
Ferry Lianto

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

What is the Tcode for WBS Hierarchies in R/3

Hi All,
What is the Tcode for WBS Hierarchies in R/3? and more over how can we include WBS element groups in our bw reports.
and one more does any relation between WBS element Hierarchy and WBS element Group
Regards,
Sekhar

Hi Shekar
CJE0    Run Hierarchy Report
CJE1    Create Hierarchy Report
CJE2    Change Hierarchy Report
CJE3    Display Hierarchy Report
In a work breakdown structure (WBS), you describe the individual tasks and activities in the
project as individual elements in a hierarchy.
Depending on the phase of your project, you continue to break down the tasks and activities in
your project, step-by-step, until you reach the level of detail necessary to carry it out.
The individual elements represent activities within the work breakdown structure. The elements
are called work breakdown structure elements (WBS elements) in the Project System. WBS
elements can be:
Tasks
Partial tasks which are subdivided further
Work packages

What is the Tcode for document header.

HI all.
What is the Tcode for document header.

Hi,
Post Document: Header Data (FBR2)
Purpose
Use this procedure to post a new document referencing (copying all or part) of an existing document. This process will also allow the user to reverse a document that cannot be reversed using transaction FB08.
Trigger
Perform this procedure when there is a need to post with reference an existing document to create a new document. Or to reverse a document that cannot be reversed using transaction FB08.
Prerequisites
Before beginning this task, obtain the following information.
·         Document number and fiscal year of the document to be referenced or reversed
    Document being referenced must be a posted document.
·         If applicable, the reversal reason code
Menu Path
Use the following menu path(s) to begin this transaction:
·         N/A
Transaction Code
FBR2
Helpful Hints
Generate reverse posting can be used when using transaction FB08 is not possible. Examples provided below.
·         Original document types such as WA and ZF cannot be reversed using the FB08 transaction
·         Document was already reversed but the reversing document is incorrect
·         Document to be reversed is a reversing document
·         R/O/C/D indicates a field is required, optional, conditional (dependent upon another selection) or the information defaults (based on previously entered information or system configuration)
Reward if helpful
Jagadish

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

I have a fairly new mac book pro with retina display- I have not tried installing anything other OS on it. In spite of that yesterday when I turned it on, I got the error: no bootable device insert boot disk and press any key. what is the reason for this?

I swithced it on by clicking on options when I start up and then clicked on Macintosh HD. the other option was a question mark and network drive.
Is there a way to ensure it never happens again, what is the cause for this problem, if I need to uninstall some application, i am happy to do it as long as I know what is causing this conflict.
many thanks!

Something is not making sense here.
You claim this is a brand new machine and you have not tried to install Windows or Boot Camp.
Then why would you ever even go into System Preferences > Startup Disk and choose Macintosh HD? It should have automatically booted into Macintosh HD.
You're probably going to have to reinstall Mac OS X.

I recently upgraded to Mac OS X. I hadn't try to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

HT201441 Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such

Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111

Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

When I try to install CS6 Design and Web Premium from a disk I get this message "We are unable to validate this serial number..." What is the reason for this?

I purchased a disk copy of CS6 Design and Web Premium from a reputable seller last week and when I try to install it with the serial number I got it says "We are unable to validate this serial number for CS6 Design and Web Premium. Please contact Customer Support." What is the reason for this?
Is the serial number invalid?

Hi Ned,
Thanks for the suggestion. I eventually got in touch with Adobe Technical Support and it turned out that my Adobe Application Manager was not the latest version. They downloaded the latest version and installed it and that seemed to solve the problem. I was able to install my CS6 Creative Suite and validate the serial number. All seems to be going well at the moment.

Deactivation of Photoshop CS3 leads to an error 1914:1 what ist the solution for this problem

hello
I try to deactivate photoshop CS3 on my win XP system. When I try this I get the error code 1914:1 . This says there are no activations. But when I try to activate it on the new WIN 7 system
I get the message to many activations. What is the soltion for this problem?

Contact support by web chat.
Mylenium

Selection screen's variant (global level) - what is the tcode for this

Similar Messages

Maybe you are looking for