" Selection Screen Validation in Bo report "

Hai Friend's,
I have Developed a Web-Intelligence Report.
(1) selection Screen's .
(1) company Code
(2) Business Area
(3) vendor
When I click on company Code,I should get the Business Area's Existing in Company code's,Again when I click on Vendor I should get the Values available in company Code and Business Area.
Can you Let me know the Solution,As I have struck with the Issue .

Hai billu,
when I am following the Below Procedure for Editing the LOV Object .
Edit the List of Values for the Resort object.
Check the Automatic Refresh Before Use option.
Click Edit.
Bring Country into the Conditions and set it to: in list Prompt('What Country are you interested in?')
Click Save and Close
Click Apply and edit the next LOV object.
My Edit Button is Disabled.
can you let me know the Solution, to edit the LOV.

Similar Messages

Raising Exception in Selection screen validation

Hi All,
I am doing a selection screen validation in BI report using the CMOD. If my validation fails i need to raise a error message instead showing the report. How can i perform that. How should i handle this using abap.
Thanks in advance
Prem

Hi,
But this does not stop the execution of the report, the error message which i have given is been displayed in the report top and still the report gets executed.
Please suggest how to stop the report execution and to stay on the same selelction screen page.
Thanks
Prem

Selection-screen validation

Hi Experts,
Please can any one give me the details ..
1)What is the actual use of selection screen validation?
2) When we use Selection-screen validation?
3)If we are not written the selection-screen validation is there any effect?
I know how to write the validation for a selection screen. But why i am asking above questions is I am very new to ABAP .My Functionl people also new to ABAP. They told me one report.I asked me what are the validation for selection screen . At that time they told there is no validation.
Thats the reason to ask above questions..
please tell me the details..
Thanks In Advance..
Thanks and Regards
Siri..

Abhi,
Selection Screen Validation are used for correct input processing.
Selection screen elements are used further in select queries to fetch data. if user enters some wrong input
we will unnecessarily hit the data base with wrong values and select will fail , hence validation of the input
will avoid unnecessary data base hit.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 12:26 PM

Print Selection Screen Parameters in ALV report only once

Does anyone know how to print the selection screen within a ALV report.
I've tried everything. I have the code to capture the selection parameters into a internal table. I can use top_of_page but I only want it printed once.

Hi,
If you have captured the selection screen entries in an internal table, then you could display it once by using the BLOCK LIST ALV.
Check the function module.
REUSE_ALV_BLOCK_LIST_DISPLAY
Using this function module more than 1 alv could be display in the report.
In our case ..there will be two alvs ...one for the selection screen n other for the main report output.
Check the following example on the block List ALV....
<b>BALVBT01</b>.
Regards,
Vara

Problem in AT selection screen validation

Hi,
I am having problem in AT SELECTION SCREEN Validation.
I have 2 radiobutton and 6 parameter. if i click first radio button all the 6 radiobutton should enable and take the user input, that is working fine for me.
if i click second radiobutton , out of 6 , 3 parameter should disable and remaining 3 should enable. thats also working fine.
My problem is program has written the validation for this 3 parameter in the AT SELECTION SCREEN.
For first radioutton all the validation working fine, for second validation as soon as i press the radiobutton it will display error message. Based on 2 parameter user is filling value for 3 rd parameter.
I want the same validation to be done for second radio button after user pressing enter.
PARAMETER: p_single RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND f1,
           p_multi RADIOBUTTON GROUP rad1.
PARAMETERS: s_pwwrk LIKE plaf-pwwrk.
PARAMETERS: p_lgort LIKE plaf-lgort.
PARAMETERS: p_kostl LIKE cobl-kostl.
here is my code:
AT SELECTION SCREEN.
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
    MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
    SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
    SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
    IF p_budat0(4) NE marv-lfgja OR p_budat4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
        IF p_budat0(4) NE marv-vmgja OR p_budat4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                            'is closed.
                                        Please try again.'.
        ENDIF.
      ELSE.
        MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                          'is closed.
                                      Please try again.'.
      ENDIF.
    ENDIF.
ENDIF.

For your Case ,
If i understand clearly,You can do the validation when you want on AT SELECTION SCREEN ON WP_FIELD.
If you say your validation to be done only for Selection of Second Radio Button, then..
AT SELECTION SCREEN.
if p_multi eq 'X'. "<- Make Validation to be done only if user select Second Button
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat+0(4) NE marv-lfgja OR p_budat+4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat+0(4) NE marv-vmgja OR p_budat+4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.
endif.

Selection screen fields order in report painter report..

hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.

hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh

Problem in selection screen validation.

Hi All,
I am having the following in the selection screen:
PARAMETERS : p_r1 RADIOBUTTON GROUP grp DEFAULT 'X' USER-COMMAND dlvy,
             p_r2 RADIOBUTTON GROUP grp .
SELECTION-SCREEN BEGIN OF BLOCK b1 with frame title text-001.
SELECT-OPTIONS: s_vbeln FOR lips-vbeln             MODIF ID dly.
SELECT-OPTIONS: s_lfart FOR likp-lfart OBLIGATORY MODIF ID dly.
SELECT-OPTIONS: s_vstel FOR likp-vstel             MODIF ID dly.
SELECT-OPTIONS: s_matnr FOR lips-matnr             MODIF ID dly.
SELECT-OPTIONS: s_wadat FOR likp-wadat OBLIGATORY MODIF ID dly.
SELECT-OPTIONS: s_wbsta FOR vbup-wbsta             MODIF ID dly.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 with frame title text-002.
SELECT-OPTIONS: s1_matnr FOR lips-matnr MODIF ID mat.
SELECT-OPTIONS: s_extwg FOR mara-extwg MODIF ID mat.
SELECT-OPTIONS: s_werks FOR marc-werks MODIF ID mat.
SELECTION-SCREEN END OF BLOCK b2.
If I choose Radio Button 1, only option 1 should be triggered,
If I choose Radio Button 2, only option 2 should be triggered,
For this I have:
AT SELECTION-SCREEN OUTPUT.
IF p_r1 = 'X'.
    blk_hide = 'MAT'.
    blk_show = 'DLY'.
ELSE.
    blk_hide = 'DLY'.
    blk_show = 'MAT'.
ENDIF.
LOOP AT SCREEN.
    IF screen-group1 = blk_hide.
      screen-active = 0.
    ELSE.
      IF screen-group1 = blk_show.
        screen-active = 1.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Now I need to validate the selection Screen, I am facing issue in doing selection screen validation:
Can any one help me in how to go about this?
Thanks,
Debrup.

pls. replace the AT SELECTION-SCREEN OUTPUT event with this one:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    CASE 'X'.
      WHEN p_r1.
        CASE screen-group1.
          WHEN 'DLY'.
            screen-active = '1'.
          WHEN 'MAT'.
            screen-active = '0'.
        ENDCASE.
      WHEN p_r2.
        CASE screen-group1.
          WHEN 'DLY'.
            screen-active = '0'.
          WHEN 'MAT'.
            screen-active = '1'.
        ENDCASE.
    ENDCASE.
    MODIFY SCREEN.
ENDLOOP.

Selection Screen Validation for Character

Hi All
My query is regarding the selection screen validation for character.
I am using a Select-option: S_ORDER FOR VBAK-VBELN OBLIGATORY.
and S_order should be only having the numeric field.
Please help how to validate it for character field.

Hi,
Do as below :
at selection-screen.
if not s_order[] is initial.
if s_order-low CA 'ABCDEF.............Z'.
message 'Enter only numerics only' type 'E'.
endif.
"similarly for s_order-high also.
endif.
Thanks,
Sriram Ponna.

REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

Two selection screen problem in one report

i have a two selection screens 1000 & 2000 in single report , which needs to be executed one after the other ,
the problem is when i execute second selection screen(2000) , the cursor is going back to at-selection-screen once again.
but i need to trigger start-of-selection directly after executing second selection screen,
the first selection screen 1000 will be executed with the help of select options..
the sample code is below .
at-selection-screen.
    perform validations.
   call selection screen 2000.
    at selection screen on value request p_adm
start-of-selection.
   main logic

Moderator message - Cross post locked
Rob

Selection screen validation when using PNP LDB

Hi guys,
I want to validate my selection screen parameters.Thats is if somebody wants to run the program without giving any input parameters to the selection screen(trying to run the report with a blank screen) I want to pop up an error/information message so that it will return the selection screen.I am using PNP Logical database for my selection screen.Please help.Thanks in advance.
Thanks,
Karthik.

Welcome to SDN.
If you are using PNP logical data base then validating the fields will be little tricky...
You canc check all the other fields in START-OF-SELECTION and if they are empty return eroor. Remember all the field s on the scree... so I will suggest you to choose HR report Category accordingly.
Also,when it comes to date field then you need to check for the start and end dates rather than blank fields as SAP defaulted them to system start and end date.
Still, I will prefer to create a HE Report Category for the PNP database and use the screen while validating....that will be easy...

At Selection screen validation

Hi All,
I Have a Situation, If User does not enter any thing on seelction screen my report still displays the data based on the selection criteria, what validation can be done at seelction screen to resolve this issue.
Regards,
VB

put your cursor on Selection-screen and press ABAP help...
or, use the appropriate program event, in this case: AT SELECTION-SCREEN [for screen-name is an addition].
If structure SSCRFIELDS-UCOMM eq 'SJOB' or 'PRIN' or 'ONLI', the user has selected an execution mode and you can enforce entry of something into your ranges tables (SELECT-OPTION creates a table of the same name).
In cases like this, please search forum and/or utilize SAP's excellent ABAP HELP capability.

Re selection screen validation

Hi experts,
In one of my report I have to put validation on selection screen. I have 4 fields defined under select-options (S_LGNUM, S_WERKS S_EXIDV2, S_EXIDV).
Now
When warehouse(LGNUM) and Plant(WERKS) are blank then Case# (EXIDV2) or HU#(EXIDV) become mandtory at selection screen.
How to code for this Please help.Points sure.
Anshu.

Hi ,
Please go through the sample code.
tables: mara.
select-options: matnr for mara-matnr,
                mbrsh for mara-mbrsh,
                meins for mara-meins ,
                mtart for mara-mtart.
                at selection-screen.
                if matnr is initial and mbrsh is initial.
                  if meins is initial or mtart is initial.
                  message e000(0) with 'Please enter values'.
                  endif.
                endif.
Hope this solves the problem.
Reward points if helpful.
Thanks and Regards.

Selection screen validation - facing an issue

Hi All,
I am facing an issue while doing validations on selections screen of a report program.
On selecting a checkbox, a field related to that should become mandatory.
But if I do the validation in selection screen events,
for the first time also, when I select the check box, it is displaying error message saying no data in mandatory field.
So I am doing the validation in start-of-selection event.
Is there any work around for this?
Please help me in this regard.

Hi
maybe you could try coding the validations at selection-screen.
Also remove OBLIIGATORY syntax in selection screen coding.
check the value in your check box and make the required field mandatory there.
at selection-screen.
if chk_val = 'X'.
if s_mblnr[] is initial.
    if s_ebeln[] is initial.
      if s_matnr is initial or s_budat is initial.
        message e000(fb) with 'Enter at least a PO and material number/GR date!'.
      endif.
    endif.
endif.
else.
endif.
regards
Isaac Prince
Edited by: prince isaac on Nov 9, 2010 11:45 AM

Displaying selection screen details in Alv Report output display as Header

Hi all,
May be somebody knows how I can show selected values with select-options in top_of_page using REUSE_ALV_GRID_DISPLAY.
This shoud work for all the reports and diff selection screens .
I need one dynamic process which will for display any report selection screen selected details.(Basically varient information of report).
Small example if possible, please.
Thanks in advance,
Rimas

Hi Thiru,
Thanks for the input.
This is my exact requirement.
Hi Experts,
I would like to Display / Print Select-options selected details in ALV Header.
Ex: Say suppose here i enter kunnr as 1000
                                        lifnr as    2000 to 4000
                                        p_langu as 'EN'.
                                       p_dir as 'C:\TEMP,
                                       p_upda as 'X'
for selection screen below.
SELECTION-SCREEN :BEGIN OF BLOCK blk1 WITH FRAME TITLE text-000.
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
SELECT-OPTIONS : s_lifnr FOR lfa1-lifnr.
PARAMETER      : p_lanuge LIKE t002-spras DEFAULT sy-langu.
PARAMETER: p_dir LIKE rlgrap-filename
           DEFAULT text-003 LOWER CASE.
PARAMETERS: p_upd AS CHECKBOX DEFAULT 'X'.
I dont want to Hard code selection screen values like
DATA: header TYPE slis_t_listheader,
wa TYPE slis_listheader,
wa-typ = 'S'(093).
wa-key = s_lifnr .
wa-info = 'Vendor no".
APPEND wa TO header.
I want dynamic process for all of my selection screen values selected
hard code may be it will be fine small selection screen it will work.
Fur that i got one process to get dynamically through fm
Ex: DATA: irsparams TYPE rsparams OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = program
TABLES
selection_table = irsparams
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
loop at irsparams.
write : / irsparams-SELNAME.
write : / irsparams-SIGN.
write : / irsparams-OPTION.
write : / irsparams-LOW.
write : / irsparams-HIGH.
endloop.
I have done my requirement partially but i am failed to achive my full requirement.
Because
rsparams strcture is diff from slis_t_listheader.
Can any one help me for further assistence to display irsparams strcture data in alv header.
Thanks
Nag

" Selection Screen Validation in Bo report "

Similar Messages

Maybe you are looking for