Selection screens as subscreens

Hi
Can we use selection screens as subscreens ?
Thanks

Hi
Please refer to this link..
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba78735c111d1829f0000e829fbfe/frameset.htm.
The link says :
It is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL <n>].
SELECTION-SCREEN END OF SCREEN <scrn>.
But You cannot call them using CALL SELECTION-SCREEN.
<REMOVED BY MODERATOR>
Thanks
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 1:44 PM

Similar Messages

Selection screen as Subscreen help required

Hello All,
I am facing a problem by calling selection screen as subscreen, Here is my problem
In my main screen i have create a sub screen as search help
so in my sub-screen i have select-options
If i click the button to include and exclude some values i don't see the dailog box for selections is not appearing.
Please provide help. I need to allow the user to enter some n values?
Regards,
Lisa

Hi,
There is a small mistake that you are doing..
In the subscreen donot create the select options... What you need to do is... in the TOP Include write lines like..
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECT-OPTIONS s_proj FOR zimple_crmt_1000-title_part.
SELECT-OPTIONS s_cr FOR crmd_orderadm_h-object_id.
SELECTION-SCREEN END OF SCREEN 1010 .
Then.. in the screen where you have subscreen to be included write
PBO
CALL SUBSCREEN subs_1010 INCLUDING sy-repid '1010'.
PAI
CALL SUBSCREEN subs_1010.
By doing this... the select option will appear on your subscreen with the extension and interval options.
All the best.

Selection-screen as subscreen in other selection screen

Hi,
is it possible to attached one selection screen, which has been created as subscreen (selection-screen begin of sreen 2000 as subscreen) to the other one (standard one 1000), created just with selection-screen commands (begin of block, etc)?
Thank you.
J

Hi,
Try using tab strips in the selection screen..
http://help.sap.com/saphelp_nw04/helpdata/EN/00/deb23789e95378e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Thanks
Naren

How to call subscreen and provide selection screen in subscreen

Hi experts,
please anybody suggest me how to call subscreen in module pool screen and provide selection screen in that sub screen.
please tell me how to design this subscreen in module pool screen.
adevanced
thank you
regards
vijay krishna

Hi,
If you need to have select-options in module pool then follow these steps:-
To implement select-options in module pool, first design two input/output fields (textboxes) for the low and high value of the field and name it as <field_name>-low and <field_name>-high.
Create a button next the high value textbox and keep its sutaible function code.
Now, to call the pop-up on this button click, we have to call the same pop-up as in standard      select-options. For this we have to use the function module COMPLEX_SELECTIONS_DIALOG.
For this FM we have to pass the table name, field name and the range for the field whose range needs to fill when using the popup screen.
To pass the table name and field name details into the FM, we have to declare as:
DATA : tab TYPE rstabfield.
This structure comprises of table name and field name.
Pass these details in program as:-
u2003
*-- clear table and field details
CLEAR tab.
*-- append for range depending on the button clicked
*   either for sales order or line item
CASE sy-ucomm.
    WHEN 'VBELN'.
      tab-tablename = 'VBAP'.
      tab-fieldname = 'VBELN'.
*--To call the popup screen for the field use code:-
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      title             = text-002 u201Ctitle text
      text              = ' '
      signed            = 'X'
      search_help       = v_shelp u201Csearch help if required
      tab_and_field     = tab u201Ctable and field name details
    TABLES
      range             = r_vbeln u201Crange for the associated field
    EXCEPTIONS
      no_range_tab      = 1
      cancelled         = 2
      internal_error    = 3
      invalid_fieldname = 4
      OTHERS            = 5.
Hope this helps you.
Regards,
Tarun

Selection screen as subscreen in module pool main screen

hello
i having problem with a module pool and a selection screen subscreen , i have my main screen 100 in my module pool
i create a sub screen area , then in my top include i define a seleccion screen as subscreen 150
i define some paramets and select-options ( for the select-options feature is because i choose use the subscreen )
so far here is OK , the problem is when i fill the subscreen data and press a pushbutton define in the main screen ( 100 )
the field are getting cleared ( BTW i call the subscreen in the PBO of the main screen ( 100 ) using call SUBSCREEN SUB_AREA INCLUDING SY-REPID '150'. ) so my question is how i can do for save the data filled in the subscreen ?
thanks

i find the solution of my own question:
in the first line of the PAI event of the main screen ( where you call the subscreen ) need add 'call subscreen SUB_AREA_NAME_HERE.

Call a report with selection screen as subscreen.

Hi all,
i need to Submit And Return a Report having some parameters and Select options, from a Function Module.
all i want that the Selection Scrren of Report should appeared as Subscreeen, so that Calling Screen sould be visible in Background.
Is this Possible , if yes then How ?
thanks in advance,
Nitin

Running new report means opening new internal session. This can't be embeded within the current internal session where your function group (function module specifically) runs. So there is no such a way which you could run a report inside a subscreen area.
If you however want only selection screen of the report to be embeded inside your subscreen area (not run) you can use
"report Z_SUBSCREEN_REPORT
SELECTION-SCREEN BEGIN OF SCREEN 0200 as SUBSCREEN.
PARAMETERS pa type c.
SELECTION-SCREEN end of SCREEN 0200.
"main screen's flow logic in function group with subscreen area
PROCESS BEFORE OUTPUT.
call SUBSCREEN area INCLUDING 'Z_SUBSCREEN_REPORT '0200'.
Regards
Marcin

Selection Screen in Subscreen Dynpro of Tabstrip

Hy @ all,
I have a Problem. I have a Dynpro with a tabstrip on it. This tabstrip is connected to 4 Subscreen Dynpros connected by tabstrip pushbuttons.
Now I need to display select-options in the first tabstrip. I did it via a subscreen for this first tabstrip. Now I habe the problem, that the tabstrip itself is not able to change the sites. Only if I delete
the the "call subscreen .... " for the select-options the first tabstrip dynpro changes to the nex tabstrip dynpro.
Can anybody help me please? I dont even know how to go on.
Thx!
Kind Andy

Hello ,
thx, but i solved it yesterday. It are always the small things, which have to be found.
Thx for Reply
Andy

Calling a selection screen in a subscreen of a tabstrip

hi,
I have created a tabstrip where i have included a subscreen.
I want to create and call a selection screen within that subscreen.
Can anybody tell me the steps required?
thanks in advance,
Abhishek

hi
good
try this
In the same way that you can define a screen as a subscreen in the Screen Painter, it is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN scrn AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL n].
SELECTION-SCREEN END OF SCREEN scrn.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
http://sap.niraj.tripod.com/id40.html
thanks
mrutyun^

Subscreen with Select-Options called from At Selection Screen event

Dear friends,
I'm trying to call a subscreen that contains a select-options, from an 'at selection screen' event, in a report program, but without sucess.
Here's go what I'm doing:
I declared a selection-screen as subscreen in my main program, and I'm calling it from a module-pool subscreen area, to make the module-pool select-options magic.
In my main report program, I have a customized status GUI with a new toolbar button and I'm handling it at the 'at selection screen' event.
What I need to do is to call the subscreen that contains the select-options when this new customized button get pressed, but when It happens, the select-option selections pop-up doesn't appear.
If I call the subscreen from the 'start-of-selection' event, it goes fine, just don't work from the 'at selection screen'.
Any ideas on how can I do it?
Thank you,
Heber

i think you should try something like this:
at selection screen.
if condition handled ....
show_popup = 'X'.
endif.
at selection screen output.
if show_popup EQ 'X.
call subscreen
endif.

Initializing Selection-Screen as dynpro subscreen

Hello!
I wrote a dynpro program that includes a selection screen as subscreen. In the flow logic the subscreen is called before output like this.
process before output.
call subscreen sub including sy-repid '110'.
module status_0100.
The program works fine to this point. Now I want to initialize a select-options table in the selection screen with some values. Doing this in the status_0100 module doesn't work. I suppose at this point it is too late to change values of the selection screen. I can't change the flow logic of the selection-screen 110 because it is generated automatically.
My questions are:
1. Is there any kind of initialization block or something like this where i can place the code to fill the select-options table?
2. Filling a select-options table by appending lines to it is the common way to do this, isn't it?
Thank you for your answers,
Georg

There is nothing stopping your from doing this?
process before output.
module status_0100. "<-- Put this here
call subscreen sub including sy-repid '110'.
And then fill your select-option in the STATUS_0100 module, make sure that you apend to the internal table!
Regards,
Rich HEilman

Selection screen field is not populated without pressing "Enter"

Hello All,
I am calling a report from module pool using SUBMIT statement. I have defined a selection screen as subscreen on module pool screen. On this selection screen i have a select option S_BUKRS. When I input company code 1000 and just press execute button on module pool, it is taking me to the report output. But S_BUKRS is not filled before the submit statement and hence report is executing as if S_BUKRS is initial.
I put a breakpoint and saw that the field S_BUKRS is not filled before calling the repot.
I re-ran the transaction (module pool) and this time after inputting 1000 in S_BUKRS I pressed enter and then pressed execute button. Now the value is transferred to report since S_BUKRS[] is filled.
Do I need to press enter key after inputting the values on the selection screen everytime; before pressing the execute button?
What could be the issue and how can I resolve it?
I am calling the report in PAI of module pool using statement SUBMIT ZREPORT1 WITH s_bukrs IN s_bukrs AND RETURN.
Thanks,
Sandeep

sandeep akula wrote:
Hello All,
> I am calling a report from module pool using SUBMIT statement. I have defined a selection screen as subscreen on module pool screen. On this selection screen i have a select option S_BUKRS. When I input company code 1000 and just press execute button on module pool, it is taking me to the report output. But S_BUKRS is not filled before the submit statement and hence report is executing as if S_BUKRS is initial.
> I put a breakpoint and saw that the field S_BUKRS is not filled before calling the repot.
> I re-ran the transaction (module pool) and this time after inputting 1000 in S_BUKRS I pressed enter and then pressed execute button. Now the value is transferred to report since S_BUKRS[] is filled.
> Do I need to press enter key after inputting the values on the selection screen everytime; before pressing the execute button?
> What could be the issue and how can I resolve it?
> I am calling the report in PAI of module pool using statement SUBMIT ZREPORT1 WITH s_bukrs IN s_bukrs AND RETURN.
> Thanks,
> Sandeep
I believe, you should be able to caputre the value of S_BUKRS in AT SELECTION-SCREEN event even if the user executes the program with out hitting Enter key. Make sure that you are including the CALL SUBSCREEN <area> statement in the PAI as the first statement.
-Rajesh.

Resetting back of a selection screen in a webpage

Hi All,
I have a requirement wherein once i am trying to run a report on Web UI(Web Page Report deveoped on WAD). Once i click on the report link it takes me to the link of a selection screen wherein i input certain values and then click on the run report button to execute the report. The issue occuring here is once i enter the values in the selection screen and click on the run report, the report output opens fine and in a correct way in a new window but the selection screen resets back to a strange kind of a page wherein i am no longer able to select different values. It shows a blank kind of a screen which certain tabs on the top of the page showing exceptions,variables,etc. I need to keep the selection screen intact without letting it get reset to that kind of a page so that i can make different selections on that. What happens in the above case is when i click on the back button on that webpage with strange view, the selection screen comes back.I dont want this transition to happen and want to keep the selection screen intact. Please advise.
Thanks!
Subhra Ghosh.

hi
good
try this
In the same way that you can define a screen as a subscreen in the Screen Painter, it is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN scrn AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL n].
SELECTION-SCREEN END OF SCREEN scrn.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
http://sap.niraj.tripod.com/id40.html
thanks
mrutyun^

Problem in Submit via selection screen statement

Dear Experts,
I have designed selection screen and a dialog screen 100. I am passing the selection screen values to dialog screen using Selection screen via selection screen statement. When i tried to change the values in dialog screen, it is not allowing me to do so and the values are not refreshed.
I have searched the SDN Forum, but not able to find the suitable thread.
Regards,
Ramesh Manoharan
Edited by: ramesh.manoharan on Mar 17, 2010 1:03 PM

Hi,
I have used the below statement to pass values the values from selection screen to dialog screen (Created as an Executable program)
Submit <pgm> via selection screen
with ...... .
Dialog screen is created as an executable program where i have created two subscreen area and populating the Selection Screen as subscreen by using the below statement:
selection-screen begin of screen <subscreen no.> as subscreen.
selection-screen end of screen <subscreen no.>.
The problem i am facing is that the values of selection screen are getting populated in the dialog screen. But when i tried to change the input values in the dialog selection screen. I am unable to do that and it is not showing the new entered values. Only the previous values are shown (got from selection screen from Submit via selection screen statement).
Kindly let me know where i am going wrong ? Kindly help me to overcome the problem .
Regards,
Ramesh Manoharan

Selection Screen in Screens

Hi,
I am using Selection screen as a subscreen in a screen.The selection screen is having few parameters and a push button with function code.
So how can i (to execute few statements by finding the function code) capturing the function code by the user action on the push button of selection screen.
with rgds,
Anil.P

Hi John,
I want to use selection screen as sub screen .
I defined selection screen in the pbo of a screen , and called selection screen as subscreen in that pbo only.so how can i capture the event triggered by the push button of selection screen.In the PAI events of the sceen, i checked the field sy-ucomm , but it is not doing the work i defined for this event, if the condition on the sy-ucomm is satisfied.
so is it possible to findout whether the user has selected the push button of selection screen, which is defined as sub screen in a acreen.
with rgds,
Anil

Reg: Selection screen tabstrip

Hi all,
I need to create a screen with tab strip and inside the tab it should hold a subscreen containing text element and checkbox and a button.
This is to be done using the selection-screen begin of screen method and not as a module pool.
SELECTION-SCREEN BEGIN OF SCREEN 9000 TITLE title.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                    TAB (20) button1 USER-COMMAND push1,
                  END OF BLOCK mytab.
SELECTION-SCREEN END OF SCREEN 9000.
I tried by above way but it's going to dump.
Kindly help me on this by providing a sample code as to how to go about it.
Thanks in advance,
Krithika

Hi
Sample programs:
DEMO_DYNPRO_TABSTRIP_LOCAL Tabstrip Control - Scrolling at SAPgui
DEMO_DYNPRO_TABSTRIP_SERVER Tabstrip Control - Scrolling at Application Server
DEMO_SEL_SCREEN_IN_TABSTRIP Selection Screen as Subscreen in Tabstrip
DEMO_SEL_SCREEN_WITH_TABSTRIP Selection Screen with Tabstrips
SELECTION-SCREEN: BEGIN OF TABBED BLOCK selec FOR 17 LINES,
                    TAB (23) button1 USER-COMMAND push1,
                    TAB (23) button2 USER-COMMAND push2,
                    TAB (23) button3 USER-COMMAND push3
                    DEFAULT SCREEN 1001,
                    END OF BLOCK selec.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1001.
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1002.
SELECTION-SCREEN BEGIN OF SCREEN 1003 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1003.
Initialization
INITIALIZATION.
button1 = text-det.
button2 = text-sup.
button3 = text-mef.
selec-prog = sy-repid.
selec-dynnr = 1001.
selec-activetab = 'BUTTON1'.
Managing the keys
AT SELECTION-SCREEN.
CASE sy-ucomm.
    WHEN 'PUSH1'.
      selec-dynnr = 1001.
      selec-activetab = 'BUTTON1'.
    WHEN 'PUSH2'.
      selec-dynnr = 1002.
      selec-activetab = 'BUTTON2'.
    WHEN 'PUSH3'.
      selec-dynnr = 1003.
      selec-activetab = 'BUTTON3'.
ENDCASE.
2) DATA flag(1) TYPE c.
SUBSCREEN 1
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
p2(10) TYPE c,
p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 100.
SUBSCREEN 2
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
q2(10) TYPE c OBLIGATORY,
q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 200.
STANDARD SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
TAB (20) button1 USER-COMMAND push1,
TAB (20) button2 USER-COMMAND push2,
TAB (20) button3 USER-COMMAND push3
DEFAULT SCREEN 300,
END OF BLOCK mytab.
INITIALIZATION.
button1 = text-010.
button2 = text-020.
button3 = text-030.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
WHEN 1000.
CASE sy-ucomm.
WHEN 'PUSH1'.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
WHEN 'PUSH2'.
mytab-dynnr = 200.
mytab-activetab = 'BUTTON2'.
ENDCASE.
WHEN 100.
MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
WHEN 200.
MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
ENDCASE.
MODULE init_0100 OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'MOD'.
CASE flag.
WHEN 'X'.
screen-input = '1'.
WHEN ' '.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDMODULE.
MODULE user_command_0100 INPUT.
MESSAGE s888(sabapdocu) WITH text-050 sy-dynnr.
CASE sy-ucomm.
WHEN 'TOGGLE'.
IF flag = ' '.
flag = 'X'.
ELSEIF flag = 'X'.
flag = ' '.
ENDIF.
ENDCASE.
ENDMODULE.
START-OF-SELECTION.
WRITE: / 'P1:', p1,'Q1:', q1,
/ 'P2:', p2,'Q2:', q2,
/ 'P3:', p3,'Q3:', q3.
<b>Reward if usefull</b>

Selection screens as subscreens

Similar Messages

Maybe you are looking for