Selection text and text elements contents not displayed
I have a language related problem
I have 2 servers .
In first server I logged in english language and the selection text and text elements are displayed in English.
The requirement is I dont want to translate these texts it should be displayed in English only even if I log into SAP with other language.
So if I log in german I see the texts in English in the first server.
But this is not the case with second.
If I log in with English I see the english texts but if I do in german I am not able to see this english text with proper contents .
Can anybody let me know if there are any settings to be done ? As its working fine in first server but not in second .
Edited by: Jalpa Shukla on Oct 22, 2008 11:19 AM
Hello Jalpa Shukla,
If you want to display the text in english language only better dont use Text-element
instead of using text element you hard the text in the program then you will display the text in same in English.
Try in this way, If not past the code i will give the solution
Similar Messages
-
Why are the text and graphic elements are not showing on the iPad
I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
RichardThey're called overlays for a reason. You'll need to change the text to an MSO as well.
Select it, create a new MSO, set it to play once no delay, no crossfade.
Other choice would be to put the text into each state of the MSO.
Bob -
Some modules and texts on my website are not displaying appropriately on Firefox.
Hello Firefox forum:
I have noticed a problem on my website every now and then when I open my website with Firefox. This problem is not evident all the time but 1 out of 3 times, whenever I open my website with Firefox, some of the text and other elements get abnormally super-sized or abnormally small. At first, I thought the problem would heal itself but for months now it has not gone away and it keeps haunting my website.
The interesting thing here is I have never once seen this problem with any other web browser apart from Firefox. All the other web browsers display contents of my website very well.
[REMEMBER THAT THE PROBLEM DOES NOT SHOW EVERY TIME YOU VISIT MY WEBSITE WITH FIREFOX. IN ORDER TO RECREATE THE PROBLEM, YOU WILL NEED TO KEEP REFRESHING KESSESPAGE.COM OVER AND OVER [ABOUT 5 - 6 TIMES] IN ORDER TO SEE A SAMPLE OF THE PROBLEM. THUS IF IT DOES NOT MANIFEST ITSELF AT THE VERY FIRST TRY. ]
Link to my website>>> http://www.kessespage.com
Please help me find a solution to this.
Thank you,
Emmanuel Kesse.A couple times I saw the wording "General stuff" and the associated price display in a large font. Didn't notice any other anomalies right away. I was using NoScript, so possibly some scripts would have led to other changes.
This forum focuses on end-user support. You can find more web development help on the [http://forums.mozillazine.org/viewforum.php?f=25 mozillaZine Web Development board]. Separate forum, separate registration. Please note the tips in the Sticky Post at the top of the forum before posting. -
BPS Variable-Cost Element is not displaying Text
Dear Team,
We have a peculiar issue one of the BPS Variable defined for Cost Element is not displaying text in one of the Planning Layouts.
Another variable is displaying text in another layout.
Surprisingly...when I reused the old variable in the new layout it is also not displaying the text.
Am I missing something....appreciated your quick support.
Thanks & Best Regards
SrinivasHave you check the layout Lead-Column setting? Is it set to 'Key/Description'?
-
Firefox 33 HTML select elements do not display correctly
HTML form <select> elements do not display options correctly in Firefox 33.
For example:
<select id="field_4" class="mainForm" name="field_4">
<option value=""></option>
<option value="submitted"></option>
<option value="pending"></option>
<option value="discarded"></option>
<option value="all"></option>
</select>
should display a drop down with 5 elements (first one blank) but no elements at all are displayed.
The bounding box does not seem to be computed correctly so no options display.
I have observed this issue on multiple pages. These pages displayed correctly in older version of Firefox and they display correctly under IE. The problem occurs with no addons or additional themes installed. The problem does not occur in SafeMode so I suspect that it is theme related but the Default 33.0 theme is the only installed theme and it cannot be disabled outside of SafeMode. I tried installing and changing multiple themes without success. The problem persists after restarting Firefox and after rebooting the computer and even after uninstalling and re-installing Firefox.
I can supply a screen shot if needed.You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.
Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O -
Short text and number of outline not maintained error in BAPI_ENTRYSHEET_CREATE
Hi Experts,
I am using BAPI BAPI_ENTRYSHEET_CREATE' for creation of service entry sheets.
I passed below data into the respective parameters
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
And just executed BAPI, I am able to get the ENTRYSHEET NUMBER.
Next I tried passing below data again
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
ENTRYSHEETSERVICES:
QUANTITY
10.000
BASE_UOM
AU
And then executed - I am getting an error saying 'Short text and number of outline not maintained'.
My input file to BAPI contains the structure as PO, Item Number, Short Text for Service Entry sheet and Quantity.
Please suggest if any ideas.
Regards,
RafiHi All,
I resolved this. Please refer screen shots below for solution
Below screen shots show about the data to be passed to BAPI_ENTRYSHEET_CREATE
Regards,
Rafi -
Standard Text and Text element
Hi Everyone,
Hope you all doing great.
What is the difference between SAP Stadard text and Text elements? When and where to use these?
I have got Terms and condition text for my quote O/P Document, Is it okay if i go with Standard text?
What is the Text ID i have to use?
Thank you
KrisHi
Difference between SAP Standard text and Text elements :
SAP Standard text : The standard texts which have been already created and can be created
Text Elements : They are the elements which are available in VOTXN and are assigned while configuring text determination
Regards
Srinath -
What is the difference between Standard text and Text Symbols?
Hi,
1.Difference between Standard text and text symbol,?
2. Which we use Standard symbol?Text symbol
Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
- Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
- Using a standard text symbol.
The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
Also check this link,
http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script. -
TOC Topic content not displayed in WYSIWYG Editor
I use RoboHelp X5. When I click a topic in the TOC pane I
expect to see its contents displayed in the WYSIWYG Editor. Instead
the WYSIWYG pane is grey and the TrueCode pane is blank with a
cursor flashing on the upper left corner!
I searched for some similar issue on this forum and could not
find it. However, I did gather that I could use another editor by
right clicking a topic when in the Project tab and selecting one of
5-6 editors. I tried RoboHelp TrueCode and was amazed and relieved
to see the code and content for the topic displayed in the TrueCode
pane...so I went a step further and tried the WYSIWYG editor and
wonder of wonders, the topic content was displayed.
Can someone please tell me what is going on? Should I
reinstall RoboHelp X5? Why does the topic content not display when
I click the topic from the TOC tab?Welcome to the forum.
There have been posts about this but maybe your forum search
history is not set to go back far enough.
Rather than right click and selecting RH True Code, at the
bottom of the editing pane there is a true code tab which will
quickly enable you to see your code is still safe. That said, if
you then click WYSIWYG, you don't get the view restored, usually.
Maybe your way has an advantage.
It's one of those things that happens now and again. I don't
think reinstalling will help. I have had it happen several times in
a day and then you go months with it working just fine.
I don't believe anyone has ever lost any data. At worst you
just have to close RH and reopen it.
For what it is worth, I haven't seen this happen in RH7. -
When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.
No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes -
Difference between Include Text and Text Modules in Smartform?
Hello Experts,
I need to know the differences between Include Text and Text Modules in the Smartform.
When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
Now i need to know the differences between Include Text and Text Module.
Thanks and Best Regards,
SureshHi Suresh,
Kindly check the below link for Text Modules.
[http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
For Include Text:
[Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
Regards,
-Syed. -
I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck! -
To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit -
Trying to publish an iBook and having major problems at the last step. Here is my error message:
Apple's web service operation was not successful
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)
Any advice???Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!
Maybe you are looking for
-
Sorry...I updated details about my phone...
-
Hello gurus, I am getting the error "Virus scan profile /SCET/GUI_UPLOAD is not active" during preview when I use data seperator "," for csv file. When I use ";" the error is gone but then I won't get right data in the fields because its .csv format
-
SAP Instance in "only display" mode
Dear Guru, do you have any idea how can I set my R/3 4.6C in display mode? Shortly will be unavailable this old R/3 instance but for a small period we want to let this instance up and running but only in visualization mode, we want that all possible
-
SOLVED Sendmail frozen configuration .TS extension
Hello! I recovered my files with help of photorec from a crash. When I check files with extension .ts by the file command, it shows them as Sendmail frozen configuration. I don't know what it is and how to use them, if it is really mail files then h
-
What are the shortcut keys Ü and ÿ?
Hi! In the german version of ID CS6 some shortcut keys are not exactly clear. What keys do I need to press to show or hide the help lines?