Selection tool in my CS4 doesn't work

The Selection tool in the tools panel (Flash CS4) is supposed to allow the user to select a portion
of a bitmap image to convert to a symbol. All mine does is drag pieces of the image
around, ie move stuff! If it's not a bitmap image,but a gif or jpg, the tool just drags the entire image
around the stage.
Is this version defective, or is there something that's not set correctly? Thanks!.
Wallace

I think the translate widget and the service it accesses may be kind of obsolete. The best translation services are now
http://translate.google.com
http://www.bing.com/translator

Similar Messages

Bought a new Mac, migrated data, now CS4 doesn't work. Why?

I bought a new Mac, had the Apple guys migrate my data and apps to it. Now CS4 doesn't work.
I researched a bit and found that I SHOULD have deactivated and uninstalled CS4 from my old Mac. I've now done that.
But do I have to uninstall CS4 files from my new Mac now--and reinstall? Will that work?

Hi,
I have a question related to one you answered above: "bought a new Mac, migrated data, now CS4 doesn't work."
My situation is a little different. I am hoping you can help me with it. I hope I am not violating any protocols by asking you specifically? A year ago I reinstalled my Mac's operating system. My CS4 is on my computer under "Previous System." I am unable to open it from there and I do not want to attempt migrating it for reasons noted above. I did try to reinstall it as you suggested to hbrady67 by dowloading from CS4 products with my serial number but I got this message: "Upgrade Check We looked in the default location for qualifying products installed on the machine, but none were found. You may verify upgrade eligibility now by completing the fields to the right. 1) Select a product you already own. 2) Enter a serial number for this product. CS4 wasn't in the list of selections. The protocol suggested won't work for me since I am not doing an upgrade but trying to reinstall what I already have. Can you direct me on where to go/what to do? Thank you very much. Bergi.
I found the solution to this problem. I was able to download the trial version of what I have and enter the serial number from there. However, it still asked for a serial number from previous software: "your setup is for an upgrade version of Adobe Creative Suite 4." (I entered the serial number that I have for CS2. And it was accepted. Thank you. Bergi

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

CS4 doesn't work after LION installation

After the Lion installation i had several problems.
One of these is that the cs4 doesn't work.
i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
I had to reinstall all the suite that now works.
The question is... why??
I thought is is better to format the mac... should i do ?
thanks

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Font in CS4 doesn't work in CS6

I have a TrueType font that a friend made me a few years back. It's my favorite font and I use it frequently; however, I recently upgraded from CS4 to CS6 and the font doesn't work properly in CS6. It does show in the font menus, but now in CS6 it's sorted in a separate font category (along with the Arabic fonts at the bottom), and the sample in the font menu is now merely squares in place of characters. There is a Regular and Bold verison of the font and both have the same issue.
What changed in CS6, and does anyone know how I can edit the font to make it work with InDesign again? I know I can just pick a new commercial font, but I have such a back log of work that used that font I'd prefer to just fix the font. This is on a Mac, and FontBook validates the font just fine, other apps (including CS4 also work fine with it), I'm not using any font management software (I use FontBook merely for validating the font.)
Any insight would be greatly appreciated.

Thanks for the reply Peter.
I was able to fix 1 of the 2 problems. The font did in fact have some extraneous language entries in it's name table. I was able to edit those out and now the font sorts in the normal font list, and not in the Arabic font category.
But the font preview feature in the font menu is still showing boxes (instead of characters.) This is where it gets weird... if I go into Preferences and change the Font Preview size from Medium to Small or Large it works correctly. Just not with Medium (the default.) I've tried clearing font caches, etc, but I could at least live with small or large font previews in order to use the font with CS6.
To answer your question, the font does work correctly when setting type; however, if Font Preview is on the font will eventually be automatically disabled and drop out of the Font menu. Relaunching InDesign CS6 brings it back. Turning off Font Preview prevents this from happening.
I wonder what is different in CS6. Other apps work fine with this font (including CS4.) Even apps like Pages that also have font preview in their font menus.

Premiere CS4 doesn't work on Windows 7

I have a delicious new Windows 7 edit suite I built for nearly 3 grand, and Adobe Production Premium CS4.
Premiere doesn't work properly.
I urgently need to edit a TV documentary. I don't have time to mess around, that's why I paid for the software rather than pirate it or get something like Vegas or Pinnacle.
I try and load my Premiere project and the thumbnails for my clips are grey and the program freezes when I try to view them.
Importing the project into a new project does nothing.
I just lose response as soon as I try to play some of the clips (about half of them)
All of the clips are on a local, high speed hard drive.
I have downloaded all Window's latest updates.. Same with Adobe..
This software is fairly disgusting. I've been struggling with Adobe Premiere for many years, especially on larger projects that aren't SD DVD-AVI format.

Hi Guys
I tried doing the benchmark thing but failed-
followed the instructions on the webpage, but found afterwards that they didn't match the instructions in the RTF file..
Couldn't get the script to work- runtime error.
However, project launched in around 11 seconds, rendered in I think less than a minute, and exported both formats in about 36 seconds.
Is that useful?
I am struggling to find any more time to work with this benchmarking utility.. thanks for bringing my attention to it though.
HDD setup is
System SSD
3 x Spinpoint F3 (not in RAID as I'm struggling setting it up without wiping Windows from the SSD...)
Asus P6TD
Graphics card is the weakest link here - 8500GT, until I can afford to upgrade.. Think it has latest drivers though.
X-Fi Xtreme Gamer soundcard (very recently installed)
I do indeed have a Logitech mouse, it's using SetPoint, latest version with UberOptions.
It seems like this project is nothing less than corrupted. But nothing is helped by me importing it into a fresh project... my steps:
1. Load Prem CS4 (latest update)
2. Load Promo.prproj
3. When loaded, it takes an additional ~15 seconds of busy disk activity, loading thumbnails in the timeline etc, which it normally never does on this machine. Finally, offline symbols change to thumbnails in the project/bin pane
4. If I scroll down in the project window, the lower clips have no thumbnails and suddenly everything's fallen apart; the monitor is black, the source monitor is frozen... Sometimes Prem says not responding..

Premiere CS4 doesn't work properly with Windows 7 trial - Please help!

Hello!
I have installed the trial version of Windows 7 on my laptop and now my Premiere CS4 doesn't play the timeline in real time anymore. It worked fine with Windows Vista. I have also installed the newest Premiere update, but it didn't help. Is there a patch for Windows 7 (64bit) or will I have to wait until the full version comes out and try it again then?
Thanks in advance for your help.
Rafiki

It's a laptop and probably an older one, that means it is probably underpowered.
It's a laptop and that probably means it is a single 5400 rpm disk which is inadequate.
Bill,
Probably good observations. I tend to loose sight of the fact that most laptops are not like mine and forget the common limitations. One mentions "laptop," and I see my Sager - duh! on me.
To the OP, this ARTICLE might also offer some tips on getting your computer ready for an NLE session. Common references are to how things are done in XP-Pro (my OS), but you should be able to "read between the lines," and adapt the general concepts to Win7 and your setup.
Also, giving full specs. on your laptop might help greatly, otherwise we're all just guessing. Bill brings up a couple of critical points. Your details will either point to them, or dismiss them.
Good luck,
Hunt

Finder show items in columns an item arrangement selected: Right size this column doesn't works

like the title says, under these condition (note that an item arrangement must be selected) the “right sized” to the maximum width, necessary to display the longest item in the column, doesn't works even with a double click or choosing "Right size this column" option (in both cases the column is set to the default size).
Anyone else experience this issue?

You understand me well, sorry I'm not native English.
Have you selected an item arrangement? if I select "None" it works for me too, the issue is when I select an item arrangement (arrange by Kind for example).
My setting:
Finder > View > Show View Options:
- Always open in column views: SELECTED
- Browse in column view: SELECTED
- Arrange By: Kind
- Sort By: Name
- Text size: 12
- the "three show" SELECTED
Under the above conditions I've the issue, the column isn't resized.

Two select commands in one item doesn't work?

I've created an item in a region which contains one select sentence which goes like:
select sum(r.amount * price.prices * re.sats * ac.sats)
from registration r, pricetype price, ressoucecostdriver re, activitycostdriver ac
where
r.art_art_id = price.art_art_id
and r.activity_activity_id = 42
and re.ressourcecostdriver_id = 47
and ac.activitycostdriver_id = 53;
to that sentence I need to add the following select sentence as a sum of this one and the previous select sentence
select sum(r.amount * price.prices)
from registration r, pricetype price
where
r.art_art_id = price.art_art_id
and r.activity_activity_id = 22
So what I really need is the sum (sum(r.amount * price.prices) + sum(r.amount * price.prices * re.sats * ac.sats)) so to say, but without the where sentences is the same.
I've tried to "rename" the last select sentence to somthing like
select sum(rr.amount * priceprice.prices) to avoid the where constraints to apply for both of the select sentences, but that doesn't work apparently.
Can anyone help me?

Morten,
If you look closely at the query I posted for you, I have used WITH statements to encompass each of your two queries, I then (in the last line) perform a simple select from those queries, you could simply add the two values together there if you like.
For example -
jes@TESTDB> with tab1 as (select 1 as num1 from dual),
2 tab2 as (select 2 as num2 from dual)
3* select num1, num2, (num1+num2) as num3 from tab1, tab2
      NUM1       NUM2       NUM3
         1          2          3
jes@TESTDB> with tab1 as (select 1 as num1 from dual),
2      tab2 as (select 2 as num2 from dual)
3*    select (num1+num2) as num3 from tab1, tab2
      NUM3
         3

Aspect ratio of selection tools locked in CS4

Suddenly, all tools that produce a marquee during dragging are locked to a 1-1 aspect ratio, as though the shift key were depressed. For example, with the rectangular selection tool, a square marquee is displayed during dragging. However, when I let the mouse button up, the selected rectangle is not square, but has corners at the start and end points of the drag. If I depress the shift key before releasing the mouse button, I get the square selection corresponding to the displayed marquee.
This behaviour affects all selection tools that display a rectangle-bounded marquee (rectangle, ellipse, crop), as well as drawing tools. Similarly, transformation tools such as scale and transform also act as though the shift key were depressed during dragging, but, when the mouse button is released, produce a result which one would expect if the shift key had not been depressed (unless it is depressed as the mouse is button is released).
Any help to resolve this would be most appreciated!

I've been having the same problem. I had it occasionally with Photoshop CS3 and I've recently upgraded to CS5 and it just occurred again. I would love to figure out why this happens.

CS4 doesn't work after re-install MacBook Pro

Hello,
today i re-installed my MacBook Pro, after making a backup of all my programs via TimeMachine. After the re-installation i put all my programs back, but CS4 won't work anymore… I get the error code 150:30.
I tried to find and throw away the netflex-folder in the Library, but it's not in the library at all. I tried other steps on the Adobe-site as well, but nothng works.
I have a icensed product, but the install-disc are at my house in Holland and i am living in Rabat at the moment.
What to do?

ohhhhhhhh i thought u meant when you stand by your laptop it disconnects like your body was interfering with the signal lol. hmmmm. thats an odd one. sometimes computers of any kind have what i call "idiot moments" where they forget how to do something simple (like reconnect to the internet)
maybe try reconnecting your macbook pro to your internet starting from scratch that may solve it

Select In Point Keyboard Command doesn't work

In Motion 5, when I press shift+i to go to the input of a selected object on the timeline, the playhead always moves back to the 1st frame of the composition. Pressing shift+o does not present a problem, and takes me to the end frame of the selected object.
I have trashed the prefs, to no avail.
Anyone else have this problem?
Any ideas?
Thanks.

Thank goodness someone else has finally posted the exact problem I'm having. Not because I'm glad you're suffering Tim, but only because it lets me know I'm not alone! I've searched the net high and low for months looking for someone even having the same issue, let alone someone posting a fix.
The Undo function stops working for me from both in the drop down Edit menu and the keyboard shortcut as soon as I type in a custom zoom value for the document view. This interrupts my workflow to the point where I'm not even using PS CS5 until this problem is fixed. I'm using the entire CS5 suite + PS CS4.
Can anyone help?
OS 10.6.6
PS CS 5 12.0 x64
Jamie

PPRO CS4 doesn't work?

I got PPro CS4 (french edition) by the adobe store. Download several times. Double click. A blank window opens with the title (Adobe premiere. this software doesn't answer). Sometimes, it carshes. Sometimes, it works. I put some clip on the timeline but I can't export on a tape or through media encoder. On the tape, there is nothing. Encore answers: "can't find the files". But I can see the film on the monitors. After that, PPro CS4 was unable to find the project.
Nothing has been moved and to make sure a new download and a new clean installation have been made.
make a phone call to adobe and I'm waiting for ...
I ask also to downgrade to PPro I bought to the adobe store in 2003. But this is no more available!
I really appreciate any help
regards
francois
Windows vista integrale (french edition)
pentium d cpu 3.4 GHz
RAM 4Go
2 HD 500G
ext 1T (firewire)
GeForce 8600 GT 512Mo 2 monitors

Hello,
Thanks Robert for the link.
There are one or two problems:
1)PPros CS4 crashed when launched
2)A problem with media encoder (maybe 2 comes from 1)
The second problem looks (at least partially or it's a variant) like the problem described by Ruby45 in your forum and solved(?) by Johan973. (error messages are similar).
Some comments:
1) I have also photoshopCS (zero) and adobe web premium cs3 suite. Recently due to conflict between extension manager cs3 and cs4 i got a hard time to move the pvii extension from dw8 to dwcs3.
2) On the folder .../AppData/Roaming/Adobe/ i have some folders called PremierePro (includig the folder 4.0) and Premiere Pro (including 4.0, 1.5 and 1.0) and i never did a change.
3)I didn't find in the folder programme/adobe/..../premiere any PProCS4.exe
At this time I csan't afford any issue with dreamwaver/fireworks cs3 or any interruption of service.
Question:
1) any conflict known between CS3 and CS4? solution?
2)how to perform a very clean installation of PPro CS4 without any interference with the web suite cs33? (I already download and install ppro cs4 several times).
regards
francois

InDesign CS4 doesn't work after I migrated to a new Mac!

Please, please. Someone tell there's a way to download and older Adobe version. I've tried the help on YouTube. Migration worked on the rest of the CS4 components, but not Indeisgn. Thank you so much.

Migrating applications is not a reliable method. You should install.
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.htmlMigration

Selection tool in my CS4 doesn't work

Similar Messages

Maybe you are looking for