Selection variable not working properly on portal

Hi,
We have a report in which Survey is a selection variable(Not a mandatory variable). If I select Two or more surveys simultaneosuly in the initial selection screen, then the Portal is not displaying the data. PFB screenshot of the selection.
If I select the same two surveys individually in the selection screen, then the portal outputs the result. If I execute without selecting any survey and then apply a filter (after the output is generated) for those two surveys together, then also the data is displayed properly.
Kindly note that this report is being used by German users and the problem exists only when the Language preferences of the portal is changed to German. With English Language Preferance, the selection variable works properly.
Please suggest if anybody has faced a similar issue
Regards,
Keerthan

Hi Lakshmi,
The texts are maintained for those survey values and even with German Language Key, still not getting the output.
If i select them individually, then I am getting the output.
For instance, I have selected the surveys "0000084001" and "0000090001" together in the selection screen(I have inserted the Pic in the original post, but i am sorry it is not clear in that) and not getting the output or it hungs up in the execution state.
If i select the same survey "0000084001" only, then I get the output.
This is the same case when I select only "0000090001".
This scenario is only with German Preferance.
If i change the preferance to English and select these two surveys together, then it outputs the result.
Regards
Keerthan

Similar Messages

  • Selection tools not working properly -- Illustrator CS6

    The two selection tools in CS6 Illustrotor not working properly.  They don't select the object when I click and drag a box around them and the handles on drawing path won't stay highlighted when I use the direct selection tool so I can adjust them -- Worked in Illustrator for about 12 years and never had this problem.

    Have you tried:
    View > Show edges

  • Evaluate variable Not working properly

    Hi
    When i used Evaluate variable , It is having list of Operator (=,<>,IN etc).
    When is specified operator '=' and give one value its working properly.
    eg. Select name from table ;
    O/p = AA
    In ODI , Operator =AA its working .
    But when i specified Operator "IN" and giving value ('AA','AB') Or value (AA,AB) its not working propelry.
    Any other operator or any other option to use IN operator.
    Thanks
    Ashwini

    Hi,
    I never saw that "IN" woks!
    There is a workaround, use a at variable refresh tab a command like: (you can refresh the variable from itself)
    select case when '#project_code.my_var' in ('ab','a','x')
    then 'OK'
    else 'KO'
    end
    from dual
    put it as refresh step and add a new instance as evaluate "= OK"
    Does it help you?
    Edited by: Cezar Santos on 05/02/2009 08:59

  • F4 help not working properly in portal

    Dear All
    After applying patch in ECC system the F4 help is not working properlyin Portal. usually a drop down appears and with few key strokes users were able to move to the appropriate value.
    Its working perfectly well in the backend but in portal its not moving appropriatly in the drop down.
    What settings is required in the Portal side.
    Thanks,
    Sasha

    Hi Ryan
    In Portal we are using WebGui.
    As u said it seems the problem is not related to Portal.
    Actually we were having problem with extra tab in the screen but by applying a note that problem is solved. We are using a bar code reader for inputting data. But still the dropdown have problem like we cant select the country by using the keys initially.
    Regards,
    Sasha.

  • Selections tools not working properly in Photoshop CC 2014

    Just installed Photoshop CC 2014. For some reason I cannot get my quick selection tool and quick mask to work properly. I can make a selection but when I try to make a mask I get all kinds of artifacting going on. I try to use quick select to clean up the artifacting to no avail, in fact I start to get different artifacting in the selection that cannot be removed by the brush tool. HELP. To bad I uninstalled Photoshop CC. Can I reinstall Photoshop CC somehow? Anybody out there with the same problems? The focus area will not work also?

    At this moment, I have tried : Reset the "Adobe Photoshop Settings File" (When you open Photoshop, push "option + command + shift" for Apple).
    Not ok.
    See here.

  • Text select tool not working properly

    When I use the text select tool, it selects columns, not words in a row, which is what I want. It used to work correctly. I am using Acrobat Pro, version 9.0.0.
    I tried adding the ALT key, with no good result.

    Is it with this specific document o any pdf you work on?
    If it was earlier working fine for you, try repairing Acrobat  by going to 'Help' menu > Repair Acrobat.
    Also make sure you have updated it to the latest patch.
    Regards,
    Ravi.

  • Search not working Properly in Portal

    Hello Experts,
    we are using standard KM search iview for displaying custom search results in Portal,we have maintained Search Control set and Search option set properties of iview.
    We have created custom control set and option set in KM ,we also configured the indexing in index management.
    After this configutration search is working for documents which resides in 1 Folder of KM but with same configuration it is not working for the documents residing in 2nd folder.
    Any input ,help and suggestion are most welcome.
    Thanks & Regards,
    Siddharth

    Hello Siddharth,
    Check what is the the indexing status of the files in the second folder ? File --> Details --> View --> Index information. Ideally it should be indexing status okay.
    If the status is okay, then check for any filters in your search option set.
    If it is not okay, then check whether approval or any time based publishing is enabled in the folder. Or is there any special characters in the folder name which is preventing the files inside from getting indexed.
    Regards,
    Vinod

  • Selection tool not working properly

    As I am dragging the tool it is selecting as it should but as soon as I stop dragging the area I was trying to select has a bunch of random sections which are no longer selected.  When I then try to add to the selection, it simply changes which sections are selected and not selected.  I cannot get it to just select as I want it to. 
    Therefor, when I select via layer I end up with this.
    Please help.

    Your using the quick selection tool in add mode with a large brush size and who knows what other brush settings.  Try reducing the brush size and play with the other brush setting too. Look at the black dash outline your selection compared to the one on her forehead made using a smaller brush. However even with a 25% space 96 px brush I have no problem selecting the background. Try resetting your preferences.

  • %@ include file= ... does not work properly in Portal

    I am devloping a portlet based on a jsp that uses some <%@include ..> tags. I have
    a problem in that variables declared and used in one jsp is not visible in a jsp
    that is included later on. Also, the scope of the page import tag of the main
    jsp does not cover the included jsp's.
    <%@ page import="javax.servlet.* ......>
    <%@ include file="variables.jsp" %> // Classes imported above are not recognised
    in this jsp
    <%@ include file="code.jsp" %> // Variables declared and used in variables.jsp
    are not visible here
    The exact same code runs very well in a Tomcat container (as pure jsp, not portlet)
    Can anybody help here please?

    Geir -
    I have the same problem. If you do solve it, please post it to this thread.
    Thanks
    Kunal
    "Geir Willumsen" <[email protected]> wrote:
    >
    I am devloping a portlet based on a jsp that uses some <%@include ..>
    tags. I have
    a problem in that variables declared and used in one jsp is not visible
    in a jsp
    that is included later on. Also, the scope of the page import tag of
    the main
    jsp does not cover the included jsp's.
    <%@ page import="javax.servlet.* ......>
    <%@ include file="variables.jsp" %> // Classes imported above are not
    recognised
    in this jsp
    <%@ include file="code.jsp" %> // Variables declared and used in variables.jsp
    are not visible here
    The exact same code runs very well in a Tomcat container (as pure jsp,
    not portlet)
    Can anybody help here please?

  • Quick Select Tool not working properly

    Hi Guys
    I have a large photo merge image and wanted to content aware fill the missing bits. When i try to use the select tool it selects while i hold my mouse button down but as soon as i let go it seems to either disappear or jump to somewhere totally different. This only happens in the checkered part with no image, i can select things fine within the image itself.
    My guess is that it won't work because the image is too large?? 48k x 5k
    Thought i might just try the Spot Healing Brush instead, didn't seem to handle things too well.
    Just to add to this, nothing to do with the size of the image as i can't select on a much small image either. Basically i can only select the actaully photo rather than the checkered part around the outside when i want to content fill.

    After you ctrl click on the layer to load the layers transparency:
    (click on the below screenshots for larger views)
    Select>Inverse
    Select>Modify>Expand and use a value of about 10 pixels
    (varies depending on how big your pano is)
    then Edit>Fill>Content Aware
    You still might have to touch up some areas as the one above still needs.

  • Batch selection strategy not working properly

    Hi ,
    I have an issue with automtaic batch determination
    The header item contains 10 component items, out of 10 components I am facing issue with only one component so that I can consider this is not a configuration issue and might be a master data issue
    Scenario :
    process order created , released and after material staging saved , then the transfer order created automaticallyfor component items . the particular one component having 3 batches .. In the material master the total sheif life time maintained as 1095 days.  for the first batch mfg date 01/01/2010 the system calculates the SLED 31/12/2010 , and the remaining 2 batches expires during 08/09/2013  .logically the system should pick the first batch which one expires first ( FEFO ). but it picking the others
    If i change the date of mfg and save it , after that if i create a process order it picks the batch correctly
    but if i put back the earlier dates in mfg date after that it picking the correct batch only
    My question is why the batch sreach strategy is picking the differnt batches for same dates , whether the batch number get stored if we change manually
    pls suggest and give some hints what are the points I need to check

    Dear
    Some of the check points may be :
    1.Investigate the Batch management -SLED/FIFO : Batch management - FEFO
    2.Please check whther any Batch search strategy is maintined for th  component in MBC2 or in COB2 and check the sort rule of the batch determination   : Re: Error In Batch Determination
    3.Create a batch search strategy using selection criteria and include characteristics LOBM_RLZ (Remaining shelf life) in the class. Check the oss note 33396 to calculate this characteristics automatically.You can enter selection criteria in something like >= 0, for example.
    4.Check the Period Indicator for SLED and Rounding values in Plant Data 1/Storage Loaction 1 in MMR for the particual compoenets .
    5.Check the settings for SLED in  Material master material/sto loc data1 and  Log-batch management-exparation date check SLED settings & there is a user exit through we can configure the date check. Check in OMJ5 here you have to define check with plant and move tpe wise
    Regards
    JH

  • Datasync seems not working properly in Portal 8.1 SP1 under Solaris

    Hi all,
    We observe some inconsistence behavior for datasync in Development mode
    for Solaris and Windows.
    For Windows: datasync will automatically propagate files to managed
    server node.
    For Solaris: explicit datasync trigger is needed in datasync
    webapplication to propagate the data.
    Can you help in this issue. Thanks.
    surfboy

    Hi,
    If you open the p13n_ejb.jar you will find a configurable datasync-default.properties
    file that sets how this operates. In production (EAR) mode, the datasync operates
    out of the database, and boots from the EAR (not overwriting the db). However
    in development mode, it runs from the filesystem. Even cooler - there is a command
    line utility to query the datasync repository.
    ex:
    java -classpath C:\bea\weblogic81\p13n\lib\p13n_ejb.jar;C:\bea\weblogic81\p13n\lib\p13n_system.jar;C:\bea\weblogic81\server\lib\weblogic.jar
    com.bea.p13n.management.data.DataRepositoryQuery -app <EnterpriseAppName>@<Server>:<Port>
    -username user -password password
    Regards,
    - Noam
    "Markus Blumrich" <[email protected]> wrote:
    Heh there,
    I've also run into this problem - on Solaris as well, though I'm not
    sure
    it's particularly a Solaris issue as I don't have a Workshop instance
    communicating with that server, rather I just deploy a prebuilt ear to
    it.
    Never-the-less, it doesn't tend to see new data/ entries unless I explicitly
    trigger a sync.
    BTW - for anyone else who may not be familiar with this app, there is
    a
    datasync admin console at:
    http://myserver:7001/myearnameDatasync/index.html
    Finding this thing saved many hours of frustration...
    cheers,
    Markus
    "surfboy" <[email protected]> wrote in message
    news:[email protected]..
    Hi all,
    We observe some inconsistence behavior for datasync in Developmentmode
    for Solaris and Windows.
    For Windows: datasync will automatically propagate files to managed
    server node.
    For Solaris: explicit datasync trigger is needed in datasync
    webapplication to propagate the data.
    Can you help in this issue. Thanks.
    surfboy

  • Select() function is not working properly in solaris 10.

    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
    Thanks a lot.
    Regards,
    Srikanth.

    haisrig wrote:
    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
    It sounds to me that you've been lucky for 20 years then.
    Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
    (dbx) run
    Running: sel
    stopped in main at line 9 in file "sel.cpp"
        9      sleeptime.tv_sec = 60;
    (dbx) print sleeptime
    sleeptime = {
        tv_sec  = -4198732
        tv_usec = 0
    }That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
    (dbx) print sleeptime
    sleeptime = {
    tv_sec = -830490588
    tv_usec = 134510556
    and I see the behaviour that you describe.
    Paul

  • Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

    Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

    Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
    Many thanks.

  • My mail on iMac is not working properly. Click on email, it hangs, showing previous email. Takes forever to load. "No message selected" showing in a blank screen

    My mail is not working properly: when I click on an email it hangs, frequently showing the previous email, often for up to a minute. Or it shows "loading" and just sits there showing nothing. OR there is a blank screen saying "no message selected". It's slow to load, and I'm not happy. Recently switched from Windows PC, not impressed so far. Very frustrating.
    Any suggestions would be gratefully received. (I upgraded to Mountain LIon, and don't think I had problems before I did so, though I hadn't had the computer for long.)

    Hi Sarah,
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Maybe you are looking for