Selection Variables display in report output using BEX ANALYSER 7.0

HI All,
I am using BEX Analyzer 7.0 , I want to display the Variables selected in the selection screen, to be printed in the
Report Output.when i execute the same query in 3.5 , i am getting all hard coded and selected variable values in report output.
But in 7.0 analyzer i am not getting any filter values.can i know the reason for this ? do i need to do any settings ? how to display all filter values in report output.
Thanks and Regards,
Joseph

Hi Joseph,
I feel there might be personalization of variables.
After executing the query click on "Change Variable Values" which is on Bex Tool Bar and there click on personaliztion icon and check if any personalizations are there.
Regards
Ravi

Similar Messages

Variables display in report output in BEX Analyser 7.0

HI All,
I am using BEX Analyzer 7.0 , I want to display the Variables selected in the selection screen, to be printed in the
Report Output.when i execute the same query in 3.5 , i am getting all hard coded and selected variable values in report output.
But in 7.0 analyzer i am not getting any filter values.can i know the reason for this ? do i need to do any settings ? how to display all filter values in report output.
Thanks and Regards,
Joseph

Hello Joseph,
Please check where did you kept the restriction in the filter is it in the defalut values or it is in the characteristic restrictions. If the values are in the characteristic restricion it won't display . The values need to restricted in the default option.
Thanks,
Geeta

How to use report designer using bex analyser give screenshots details

how to use report designer using bex analyser give screenshots details

Hi,
As per my understanding you want to see Query Designer when you execute the query in BEx Analyzer.
When you launch BEx analyzer,you should be able to see new tab of "Business Explorer" in your Toolbar.
So,when you execute the query in BEx analyzer,in order to goto query designer screen,click on Tab "Business Explorer",select option "Change Query" and then select the option "ChangeQuery (Global Definition)".
It will open the query designer in which you can modify the query and save it.
Regards,
Nilima

How to use report designer using bex analyser ineed screeenshots steps

how to use report designer using bex analyser ineed screeenshots steps

Please try to search and stop asking for all types of screen shots. Thanks!

Problem in displaying Alv grid output using oops........

hi,
i have two problems in displaying ALV grid output Using Oops.
1) How to modify the fieldcatalog after we getting a field catalog using general FM.
2) initialy it is displaying 13 fields but there are 63 fields .
eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count of displayed fileds are same . how can display 63 fields at a time .

Hi,
You can chnage using below code:
loop at gt_fieldcat.
if <gt_fieldcat-field_name> = 'FIELDNAME'.
endif.
modify gt_fieldcat.
clear gt_fieldcat.
endloop.
Make sure that all the field should not have no_out = 'X' and tech = 'X'.
Thanks,
Sriram Ponna.

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

How to use report designer in bex analyser ,quary designer, wad give scree

how to use report designer in bex analyser ,quary designer, wad give screeeenshots detail

Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
WAD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
/people/prakash.darji/blog/2006/07/16/bim253-at-teched--query-report-and-web-application-design-with-the-sap-business-explorer-suite
http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
GTR

How to use quary designer using bex analyser give details screenshots

how to use quary designer using bex analyser give details screenshots

Hi,
As per my understanding you want to see Query Designer when you execute the query in BEx Analyzer.
When you launch BEx analyzer,you should be able to see new tab of "Business Explorer" in your Toolbar.
So,when you execute the query in BEx analyzer,in order to goto query designer screen,click on Tab "Business Explorer",select option "Change Query" and then select the option "ChangeQuery (Global Definition)".
It will open the query designer in which you can modify the query and save it.
Regards,
Nilima

Displaying selection criteria in ALV report output

Hello,
Ive been using REUSE_ALV_GRID_DISPLAY function module to display my report content in ALV.
My reports selection criteria has parameters, select options, checkboxes and radio buttons. As part of the ALV output, I want to display the criteria that the user had selected in the selection screen. I was hoping to do that via parameter "i_callback_top_of_page" and fill the selection criteria in the header area. I'm using REUSE_ALV_COMMENTARY_WRITE to fill the header area.
However, the header area takes too much of view space in the output if I put all the selection screen information in it.
Is there a way to make the header area scrollable? What is a good way of displaying the selection criteria information as part of the report output?
Appreciate your help.
ss

Hi SS,
1. The purpose of displaying / writring
   selection information
   in alv is
   for identifying what the user has seleccted,
   directly from the report (when its printed)
2. So, the option of priting/writing
   it on the TOP of alv, is ok.
3. However, U can also choose to WRITE
it at the BOTTOM (instead of top)
4. Try to utilise maximum spacing (horizontally)
   field1 : abcd      fidl2 = xyz field3 = ppp
   field4 : mnc       etc.         etc.
regards,
amit m.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Query and bind variable display in reports

I have created a reports portlet using the locally built providers facility with the create a new reports. It seems to work fine except that the sql query and the bind variables show up in the report along with the report itself. How do I keep these from showing up?? I am on Portal 9.04
Ken Rubesh

ON the Page displayoptions tab, you can select "Show Query Conditions?..
is that unselected?
if you are talking about the fields from your select statement showing up in the body of the report, you can set the field type to hidden on the 2nd tab(column formatting).
hope this helps

Displaying the report output in excel format

Please help me in getting the report output in excel format.
thnks

I ran into a BIG problem after passing from 6i rep server to 9i rep server.
On 6i rep server I used to set DESFORMAT='DELIMITED', and that produced reasonable tab-delimited output for reports that did not have group above (all the query groups were from left to right, not a single group having fields displayed above some other group). When deployed on rep server 9i, the same reports produced some unexplainable output: some of the rows were duplicated, but I couldn't figure out any rule.
So, the best thing to get the reports into something that fits in .xls would be to have the output in .xml, that may be imported in Excel.

Query output using BEX and web analyzer

Hi all,
I have an issue while designing a query in query designer.......I have a sales cube in which sales for every month is reflecting .....Now i have to design a query to show month wise sales....
But for some months if there is no sale record in the sales cube for that particular month like Feb 2006, when i execute the query on this month using BEX or web analyzer , it simply says "No data Found"..............
I want to show 0(zero) in sales quantity instead of this message.....Please guide me that how can i replace this message with zero value.
regards
Hina

Dear Hina Zakir,
<b>This is the BI 7 Query designer solution...........</b>
if u want to disply even if the value is Zero then goto the query properties not the single key figures go to the entire quer property and then click the Row/columns in that Suppres Zeros in that select Do Not Suppress + Effect on Tab is there in the Select Row or column or both ................then u can ablet to c the values as Zeros..
Regards
venu

Webi Report Output using dynamic Filter

Suppose my report output contains doc. number & document date which shows data of one year which filter is applied on global level means at query filters level.
Now I want to show output of only last 3 months from current date(report run date) on the basis of document date.
So how to proceed further in such scenario.
Please reply ASAP.
Thanks
Pradip

You can filter it on the report level or the block level. Highlight either one and then add the filter (make sure the filter window is open).
Thanks

Do not display field in report output using ALV

Hello friends,
I have a dilemma here. I sorted my report using a dummy field named asset_dum. now, this is my basis of sub totals but I do not need to show it in the display. Is there a way or an option to do this?

Hi,
The problem with NO_OUT is that if the user changes the layout he can see the field and there is nothing in the system that would stop him from displaying the same.
However TECH field should be useful in your case.
TECH
If this field is set, the relevant field is not displayed on the list and cannot be shown interactively. The field is only known in the field catalog. (For example, it must not be specified as a sorting criterion).
Regards,
Ravi
Note : Please close the thread if the issue is resolved and mark all the helpful answers

Selection Variables display in report output using BEX ANALYSER 7.0

Similar Messages

Maybe you are looking for