Selection variant for transportation planning.

Dear All,
Can you please let me know how to configure Selection variant for transportation planning.
Regards,
Sunya

Hi Sunya,
Check the links below.
http://help.sap.com/bestpractices/industry/pharmaceuticals/v346c_uk/documentation/SCM/_Toc27302002
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8bbeae90-0201-0010-f887-8287448cbb9b
   In these you wil find the selection variant for transportation planning
   Reward points if it helps.
Regards
Karan
Message was edited by:
        Karan Bhatia

Similar Messages

Delivery 0080000276 is not relevant for transportation planning.

At the time of (delivery related) invoice creation, system throws a message "check the error log".
Log says:
" Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
            LongText
                Detail
                 Diagnosis
                     Copying control for billing requires that shipment costs
                     are copied from the shipment belonging to this delivery.
                     No shipment costs could be determined, because this
                     delivery is not relevant for transportation planning.
                 System Response
                     The system assumes that no shipment costs are to be billed
                     in this case.
            Technical data
                Tech. data details
                 Client                                 251
                 Group Number
                 Sales Document Number                  0080000276
                 Item Number of the SD Document         000010
                 Schedule Line Number                   0306
                 Counter in Control Tables              00
                 Message Identification                 VY
                 System Message Number                  306
                 Output Type                            I
                 Message Variable 01                    0080000276
                 Message Variable 02
                 Message Variable 03
                 Message Variable 04
                 Group Type                             F "
Please advice if anyone have any idea for this error log.

Error Log 0080000276 000010 Delivery 0080000276 is
not relevant for transportation planning
It is not necessary to assign the Transportation Planning to Delivery type. Only recently, I completed a similar configuration and running successfully for a client. The issue is because of your copy control VTFL. For more information, check note 713171.
thanks
G. Lakshmipathi

Selection variant for a report painter

Hi,
I created a report painter report. I want to create a default selection variant for a specific user. For example, I want user GIRARDJU to have company code=ADM, period 6 to period 13. I tried to create a variant and call it U_GIRARDJU but it doesn't work like it does for the standard SAP reports...
Any suggestions?
Thanks a lot,
Julien

Hi,
First go to the report you have created.
Then save the selection criteria you want & give an appropriate name to your variant (eg: /INOKA).
When you execute the report next time, this variant will be there, & by double clicking it you'll get the saved information.
Best regards,
Inoka.

How to create column selection variant for VA05?

Hi Experts,
How do I create column selection variant for VA05?
Thanks,
Sachin

Hi,
Goto SU3, enter user name and press enter
goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
Now check in VA05, you will get save button in active mode.
Regards,
Chandra

Selection variant for cost element GROUPS

Community!
Is there a way to create a selection variant for cost element groups? Through customizing I can only create them for cost elements but not for groups!
Thanks,
Bjoern

Ashok,
thanks for your reply but I am looking for a way to create a variant for groups!!!!!
The help just depicts how to create variants for cost elements. You actually do have the feature to display all cost elements from <u>one</u> group within the collective processing but I would need to select many different groups, which is just not possible.
Therefore I would like to create a variant of cost element <b>groups</b>!!!!!
Regards,
bjoern

Memory-Based Snapshot Main Process for Transportation Planning getting erro

Hi All,
I have created a Plan in Transportation Planning module and asigned a facility to that plan then i did launch plan, then the program 'Launch Transportation Planning Process' running successfully but with that program Memory-Based Snapshot Main Process for Transportation Planning running and error outing.
the completion text is:
The executable file /u04/NRVIS/apps/apps_st/appl/mst/12.0.0/bin/MSTSNWRK for this concurrent program cannot be executed.
Contact your system administrator or support representative.
Verify that the execution path to the executable file
i have verified the path but there is only have '/u04/NRVIS/apps/apps_st/appl/mst/12.0.0' but no /bin/MSTSNWRK file
can anyone tell me what has to be there actually, is MSTSNWRK file missed?
thanks
vijay

Thanks for your suggestions. I finally able to resolve this issue.
- I'd relink all MSC and MSO exe files. No error found. Still not unable to launch Memory-Based Snapshot.
- I'd turned on all possible debug, trace, etc to see any possible reasons for the failure. But no help at all.
I almost created a TAR (which will need to run numerous useless checkings, talking to some clueless people, and waiting for weeks for doing nothing) and I found out I forgot to check one place - Windows Event Log. Bingo - I found the error and it's because of DLL unmatched (typical Microsoft DLL hell issue).
Using Dependent Walker to see the linking of the MSC exe file, and then I pinpointed which version of MS C++ libraries were missed. Installed the latest MS VS2005 and 2008 redistributable libraries, relinked MSC exe files again, and FINALLY it's fixed.
I need to talk to the DBA who prepare this clone to me....
Edited by: 960630 on Sep 24, 2012 1:01 AM

Creating a User-defined Selection variant for Transaction ME21N

Hi,
In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
Any help would certainly be appreciated.
Thanks,
Alam.

So I am having a similar issue. I have a fixed length flat file with 3 different record types.
1 a header ( length is 82 bytes with the first byte set to H ( single record always the first )
2 a detail record ( length is 382 bytes ) with the first byte set to D ( multiple records )
3 a trailer record ( length is 82 bytes ) with the first byte set to T ( single record always the last )
I created a UD OTD with 3 elements for each record type, RECORD_TYPE is the first field 1 byte. Matching for each on either H,D, or T. When I try and test the OTD with the Run Test button I get an unmarshal error
<SOD>""<POS>"HACCUMULAT..." failed input match, Fog#431, after <no path>: failed node: trailing junk in fixed/parent
HACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 0 0
D ar3531 ar3531 ar3531 ar3531000 55887027260 30.000 30 5098765 20080804 000T114 120080806 82820P30000001024511 25.00 0.00 25.00 0.00 25.00 25.00 0.00 0.00 0.00 0.00 0.00T
TACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 2894 0 0
Not sure whats going on, so if anyone has any suggestions on where to look that would be great
Thanks

Standard message type to transfer data for transportation planning

Hi,
We would like to develop a interface that would transfer the following data from SAP to another system (called Vista).
"(Past) Receivings and requirements shall be considered in the transportation planning. Transfer the requirement information from the ERP system to Vista for the transportation planning."
Is there any standard message type (or any other std solution) in SAP that can transfer this data from SAP to legacy system(Vista)?
In general how does one identify for any given requirement, if there exists a standard message type (standard solution) of transffering data from or to an SAP system
Thanks in advance.
John

Hi,
U can go throught this sap help
http://help.sap.com/saphelp_45b/helpdata/en/b5/9c48ebfc6f11d1bf5a0000e8a7386f/content.htm

Selection Variant for Standard transaction

Hi,
The requirement is that, On starting a standard transaction the initial selection screen should appear with a default selection variant selected in it.
Regards,
Prabaharan.G

Sudhir,
Are you sure about that ? I think the the SHD0 transaction creates screen variants only for "normal" screens, dialog boxes, and subscreens . Not for List display (and selection screens) ..
I read this at - <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fe015111d396480000e82de14a/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fe015111d396480000e82de14a/content.htm</a>
For example try and create a transaction variant for standard transaction FBL1N (make the Company code field Output only) .. is it possible ?
Will someone please verify.

Selection variants for My purchase requisitions

Hi,
During create PR,i click on Document Overview On - Selection Variants - My purchase requisitions and only show few latest PR that created by me.
May i know how system define the variant because i would like to see all the PR created by me.
Thank you.

Hi,
Go to table EBAN
steps are
T code -SE16
table - EBAN
created by - ERNAM - key in ur user ID
execute
u will get all the PRs created by you
Regards,
Uzair

Short Dump While selecting Variant for ABAP query

Hi,
ABAP query is going to short dump (CONNE_IMPORT_WRONG_COMP_LENG) while selecting a Variant. If i create and use variant then i am able to see Output of Variant.But not able to use Earlier created variants .
I think some mismatch between variant values and selection screen fields.Can anyone tell me how to rectify this ?
I am not able to debug the code as dump is coming in a System program(RSDBSPVD).Can anyone tell me which database table i can use to get values of the Variant.
Thanks in Advance.
Nirmala K

Hi nirmala,
chk the links:
http://help.sap.com/saphelp_webas620/helpdata/en/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/c0/9803a7e58611d194cc00a0c94260a5/content.htm
regards,
keerthi.

Missing Transfer Rules in Selection Window for Transport

Hello,
Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5.
Problem details:
I want to transport a transfer rule from a DEV box to a QA box. In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel. The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included.
I also noticed that this appears to be a "funny" problem. One other computer connected to BW shows the correct listing while still another shows a different listing. Has this got to do with any setting?
Please help.
Wernel

Hi Wernel,
Its better to activate ur transfer rules once again. Also this Z* TRs would be displayed in last row of the Pop up window in the select Objects list.
or select them by grouping as before dataflow by selecting InfoSoruce.
Assign points if it helps...
Regards,
ARK

Transaction for Output for transportation planning simil VF31 o Vl71?

Dear Expert,
Anyone knows if there are a transaction or a program to run, wich trigger the message wich are in status 3. in the Transport planification (O4F1)?. simil vf31 or VL71?.
I will appreciate your help.
Best Regards,

Hi Ravi,
If the despatch time was 4 earlier, it is not possible to change to 1 as the output is arleady processed. Hence there can be a case that your assumption of the output being at 4 initially is incorrect.
Please go to the table NAST. Check how many records are there for the output for your problamatic documents. If there are morethan one record in NAST, then may be the latest one has 1 as the DT while the oldest one will be 4.

Shipping Point VS transportation planning point

Hello Gurus,
Could you please the answer the following questions?
What is the different between shipping point and transportation planning point?
Where is the transportation planning point assigned to?
Why exactly we require the shipping documents in the business perspective?
Thanks and Regards,
Pavan P.

Hi Pavan,
The transportation planning point consists of a group of employees responsible for organizing transportation activities. Each shipment is assigned to a specific transportation planning point for transportation planning and shipment completion. You must define the various transportation planning points used in your organization in Customizing for Corporate Structure before they can be used to perform transportation functions. You can define this organizational unit according to your companys needs, for example, according to geographical location or mode of transport.
The transportation planning point is assigned to a company code, but is otherwise independent of other organizational units.
The shipping point can be proposed automatically during order processing depending on the plant, loading group and shipping condition.
A shipping point has an address.
The shipping point is used as a selection criterion for lists of deliveries and the work list deliveries.
The shipping point is used as a selection criterion for processing deliveries like printing, picking or goods issue.
Reward points if u helpful
Cheers,
Govind.

Dynamic creation of date in selection variant

Hi All,
I have a Z program for updating a field in BOM item. One of the input field in the report is "Valid From Date". Actually the current date is automatically fetched through a function module and it is defaulted in that field.
Our client is using selection variant for ease of use. The problem here is old date in the selection variant is replacing the current date. I want current date to be created automatically during insertion of variant also. How can i solve this problem. Is there any selection variable inside the variant for dynamic creation of Date?
Thanks
Sankar

As I know there is no setting for this. For any std or Z report variant function with L should act same way...anyway you discuss with your ADABer.
See the help for variables
Selection Variables
The following three types of selection variables are currently
    supported:
o   Table variables from TVARV
        You should use these variables if you want to store static
        information. TVARV variables are proposed by default.
o   Dynamic date calculations:
        To use these variables, the corresponding selection field must have
        type 'D' (date). If the system has to convert from type T to type D
        when you select the selection variables, the VARIABLE NAME field is
        no longer ready for input. Instead, you can only set values using
        the input help.
        The system currently supports the following dynamic date
        calculations:
        Today's date
       From beginning of the month to today
       Today's date +/- x days
       First quarter ????
       Second quarter ????
       Third quarter ????
       Fourth quarter ????
       Today's date - xxx, today's date + yyy
       Previous month
o   User-specific variables
       Prerequisite: The selection field must have been defined in the
       program using the MEMORY ID pid addition. User-specific values,
       which can be created either from the selection screen or from the
       user maintenance transaction, are placed in the corresponding
       selection fields when the user runs the program.
The SELECTION OPTIONS button is only supported for date variables that
   fill select-options fields with single values.
i.e means we can do that with D also.

Selection variant for transportation planning.

Similar Messages

Maybe you are looking for