Selective Audio

I have audio in VLC player, iTunes and Safari, but not in iDVD, Final Cut Express or Quicktime. It all used to play just fine and I'm not aware of changing anything. Has one of my downloaded progams messed my settings up (I have Mpeg Streamclip and VLC...)?
Anybody got any ideas what has gone wrong? Thanks in advance.

A) Sounds like a flash player problem:- http://www.mydigitallife.info/2007/08/15/adobe-flash-no-sound-wavemapper-trick/
Other solutions:-
http://forums.techguy.org/multimedia/682205-solved-no-sound-internet-applications.html
http://forums.techguy.org/web-email/804796-no-sound-when-viewing-video.html
http://www.codecguide.com/fix_for_flash_sound_problems.htm
Also try google, there are plenty of solutions available.
B) Reinstall hotkey drivers.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution! 
  Lenovo Deutsche Community     Lenovo Comunidad en Español 
Visit my YouTube Channel

Similar Messages

  • Error message: "the previously selected audio interface is not available"

    HELP?!?!?!?!?
    I'm stuck, and I can't go forward. Here's my issue:
    I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
    Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
    Please - this is driving me crazy.

    I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
    "Saffire LE should work fine in Logic Express.
    Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
    Do you still have the same problem?
    Do you have any other firewire devices attached?
    Have you had any other interfaces installed in the past?"
    All good suggestions, but so far no luck.
    Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

  • Selecting audio output from iPhone - bluetooth or dock?

    Hi
    I have a problem selecting audio output on my iPhone 3GS with my incar system
    Set up:
    Dension ipod dock connected direct to CD changer port on Radio
    Bury Bluetooth hands free device.(CC9060)
    My preferred option is to have the Dension play my audio.
    However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
    On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
    I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
    From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
    Any one have any ideas?
    Thanks
    Glenn

    Found a quite probable fix.
    I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
    Issue is apparently gone.
    Message was edited by: Alex HQuest

  • Unable to+decode+or+import+selected+audio

    Looking for a solution.  I am running windows 7, adobe captivate 4.  I have attempted to convert text to speech, I get the error unable to+decode+or+import+selected+audio.  I have gone to the supplied library same error.  I have taken a mp3, changed it to 16 bit rate, made the file very small same error.  I am running out of options.  I have also reinstalled captivate.  I also have CS5 running on the machine.  Any suggestions?

    Hi,
    Re-install the Neo-speech installer and try the workflow.
    Regards,
    Vikranth.

  • Selected audio and video devices may not match

    Hello - I was able to Print to Video w/no problem, from my Mac Book Pro, to my Panasonic PV-GS320 w/no problem. Now, all of a sudden, when trying to do this, I get this msg.:
    'The selected audio and video devices may not match. Please verify that the a/v outputs are externally routed to the intended device(s).'
    Not sure what happened, or what changed, but here is my setup:
    Sequence & Capture Presets are both: DV NTSC 48 kHz
    Device control preset: FireWire Basic
    Video Playback: Apple Firewire NYSC (720 x 480)
    Audio Playback: Default
    Like I said, I don't know what got changed, but, it was working before - hope someone can help, thanks so much!!
    Kristina

    I think I found the problem...I had forgotten to switch my Device Control Preset back to FireWire, from the previous non-controllable - thanks so much!
    Message was edited by: Kristina Latour
    Message was edited by: Kristina Latour

  • ... Separate/select audio channels ...

    Is it possible to select audio channel for monitoring ?
    I have some footage with interview and the journalist need to listen only channel 1 (microphone) and mute the channel 2 (camera built in microphone).
    As the same in XDCAM Transfer.
    Thanks

    Final Cut Server (and XDCAM Transfer) aren't set up to adjust what has been recorded (there's not even a volume control).
    Just open the computer's Sound system preference pane and pan the output all the way to the left.
    Of course if you are going through a mixer you can just mute channel 1, or if you're wearing earphones take the one out of your right ear...

  • M Audio firewire solo with yosemite - 'The previously selected audio interface is not available'.

    Hi, I recently bought a new mac mini with yosemite OS. I plugged in my M-audio firewire solo and (after a bit of trouble) finally managed to see it appear in GB. then moments later a dialogue box appears with 'The previously selected audio interface is not available'.
    There doesn't appear to be any update drivers from M-Audio and the CD that came with the interface also does not work?
    I can't find any information with this problem. Can any one help?

    Oops. . . A loose lead connection may have been the problem, although still not receiving a signal?

  • Get Total Duration/Length of Selected Audio Files

    Hi there,
    How can I create an AppleScript that adds the total length/duration selected audio files.
    I know how I can get the duration of a single file, doing this:
    set a to choose file
    do shell script "afinfo "&quoted form of (posix path of a)&"|grep duration"
    But I wanted to have the total length, if possible in minutes, of all selected audio files.

    There are numerous approaches, but since you've already started with afinfo, I'll keep with that.
    The first step is to extract the actual duration from the afinfo output:
    set duration to (word -2 of (do shell script "/usr/bin/afinfo " & quoted form of (POSIX path of a) & "|grep duration")) as number
    now you can just wrap this in a loop, adding up the numbers as you go. This will end up with a total number of seconds, and a little math gets you the minutes:seconds format:
    -- initialize our counter:
    set total_duration to 0
    -- note you can now select multiple files
    set file_list to choose file with multiple selections allowed
    -- and loop through them
    repeat with each_file in file_list
              try
                        set this_duration to (word -2 of (do shell script "/usr/bin/afinfo " & quoted form of (POSIX path of each_file) & "|grep duration")) as number
                        set total_duration to total_duration + this_duration
              end try
    end repeat
    -- now convert your seconds to minutes:
    set num_minutes to total_duration div 60
    set num_seconds to total_duration mod 60 as integer
    display dialog "Total duration is " & num_minutes & ":" & (text -2 through -1 of ("0" & num_seconds))

  • My software will not let me "cut" selected audio

    I am running windows 8...Lenovo computer...plenty of disk space etc.
    I used the following activation code to install Adobe Audio 3.0 on this computer.
    -------------------- [removed]
    Installation process went fine...but when I open up a file to edit,...I select the portion of the audio I want to "cut" but when I right click or go to the edit menu, the CUT option is not highlighted so I am unable to select it.
    Do I have a corrupt file?  Do I need to Re-install?
    What is going on?
    Thank You for your help.
    Kathryn Loewer
    -------- [removed]

    Hi Kathryn,
    These are public forums, so I have removed the serial number and phone number you included in your post.
    Did you have an earlier registered license for Audition 3, before installing on your new system?

  • Marking in and out only selects audio.  I need both

    I'm sure this is very fundamental but I can't figure it out.
    I've been editing a lot of home movies this weekend when suddenly my IN and OUT buttons are behaving differently in the time line. They are only selecting (affecting) the two audio tracks and not affecting the video track. Why?

    Make sure the VIDEO tab is connected in the Timeline patchbay for the track where you want the video to go.
    -DH

  • Unable to select audio to import in Flash CS5

    Hi,
    I'm working the Flash CS5 app on my Mac OSX v10.6.8. I've been working on a cartoon lately and trying to import some audio to my library, but I can't even select a file (of any type; .wav .mp3 .wathever). I already reinstalled Flash, updated quicktime and searched all over the web for a possible answer. Please help.
    Thanks in advance,
    Gene

    you can't see any sound file when trying to import into your library?
    if so, when you click file>import>import to library, check near the bottom right of the import to library panel to see that "all files" are in the combobox.
    or you see an error after selecting sound files?

  • Not able to select audio track.

    When unlinked and  I click on an audio track nothing happens. I can't clear or move the track.

    Welcome to the forum.
    Exactly how did you unlink the Audio & Video?
    If you Alt+click on the Audio Clip, in a Targeted Track, is it still not Selected?
    Is that Track Targeted?
    What version of PrPro are you using?
    Good luck,
    Hunt

  • Select audio output manually?

    Hi
    is there any solution to select the audio output manually?
    My problem is, it works only without plugged in 3,5mm Analogue output. I can select the hdmi, or internl speaker
    But right after I put the 3,5mm output to my MacMini, all the choices deselected, and only the line out is active.
    I would keep the line out plugged in (through my PA), and keep the HDMI cable as well.
    Then I would like to chose between the outputs manually
    Regards
    Peter

    No.
    You can not switch back and forth when something is plugged into the Audio Output (headphone) port, because there is a micro switch built into the port that only allows the software to output thru the Audio Output (headphone) port.
    From:
    https://discussions.apple.com/message/21190197#21190197

  • Selecting audio output device in iTunes.

    I currently have two sound cards installed.
    My computer is defaulting to playing sound through one of them, but I would like to play iTunes through the other.
    Is there a way to select the audio output device that iTunes outputs to?
    I have no been able to find the option anywhere.
    Thanks!

    Hi 
             What program are you refering to ??  Or do you mean you have deleted the driver for your Audio/output device ?? 
                                                        Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Output Module - Video for Windows - trouble selecting Audio Format

    Good day, people.
    Need help setting up AE to output .AVI with customized audio format, in my case it should be .mp3, but I would accept anything but the default uncompressed audio. (audio Output Format button is disabled when Video for Windows is selected)
    Of course I can output as-is and use external tools to repack audio data, but it seems awkward. If AE can output MP3-only audio, why wouldn't it output AVI with MP3. Probably I just don't know the right set of options, but I googled to find the answer for over a month with no success.
    Any hints would be greatly appreciated. Thanks.

    noonesshadow wrote:
    If AE can output MP3-only audio, why wouldn't it output AVI with MP3.
    Because it's a hack?! Even Microsoft does not officially support or endorse such combinations, it just has become common place when DivX and others introduced it, which is a whole different matter. If you get my meaning: On one end there are specs and standards, on the other end programmers that tend to get creative in the wrong ways. Anyway, the behavior you are seeing is correct. AE only supports uncompressed audio for AVI.
    Mylenium

  • Any idea on how to select audio track in Apple TV?

    I have a movie with two audio tracks: 1. English 2. French
    All applications are starting with the track 1 including iTunes. I don't know why but when watching it with the Apple TV it is with track 2. And I can't find a way to select the available tracks for a movie in Apple TV.

    Press and hold the play button to reveal your audio track options.
    If you don't actually need one or the other audio tracks you could always turn one off using Quicktime Pro if you have it.

Maybe you are looking for