Selective dataroaming for only one app

Is it possible to only allow dataroaming for one app? While the rest of your apps on the iPad can't use dataroaming?

No, sorry, that is not possible.
Regards.

Similar Messages

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

There is only one app at "USE CELLULAR DARA FOR:" field

How can I make other apps to appear at "USE CELLULAR DATA FOR:" field?
There is only one app "Passbook" is on that list and I cannot use Cellular data for other apps at all.

Hi sberman,
Thank you for your answer.
Restrictions is currently off.
Anyway I found that my SIM card is not working on 3G.
I replaced my SIM to other one and it works fine even without apps on the "USE CELLULAR DATA FOR:" field.
Still don't know how to add apps on this field.

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Skype not notifying (oange flash) for only one con...

I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
Any ideas? This has really been going on for at least a few months, perhaps a year

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

If I purchase creative cloud membership for only one program, will I get a paid adobe phone gap build account for free?

$djd phonegap create my-app
$ cd my-appIf I purchase creative cloud membership for only one program, will I get a paid adobe phone gap build account for free?
$ phonegap run android

There is no additional payment for phone gap build .
Please refer to http://helpx-internal.corp.adobe.com/content/help/en/dreamweaver/kb/phonegap-build-cc-2014 -update.html
Regards
Rajshree

How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

Changing DB character set for only one schema

We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

Is it possible to add a user or license for just one app?

I have a complete Adobe Creative Cloud license. Is it possible to add a user or license for just one app? What are the monthly costs?

Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

EA2: Code is generated for only one column with Domain check constraint.

I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
Edited by: Roel on Nov 23, 2010 11:55 AM
Edited by: Roel on Nov 23, 2010 12:02 PM

I logged ER for that
Philip

PDF file not generating for only one Invoice billing document

Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for only one Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali.

Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali.

Program installed for only one user

Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
Thanks

Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

ChaRM scenario for only one productive system

Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
Thom

Hi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom

Selective dataroaming for only one app

Similar Messages

Maybe you are looking for