Selective deletion and reload to DSO to DSO

Hi,
I stuck with an issue where i did selective deletion for 2nd level DSO where there was some wrong billing documents and Repair full reloded from 1st level DSO. Key figure values were uploaded but master data was missing Eq. Company code was missing after reload. Please suggest for this issue. Thank you
Regards,
Wrig

Hi,
Check the data in base ODS and see if it has same values for company codes. If everything is fine, just go for selective deletion of those billing documents again in second level and reload from base ODS. Activate and check it again.

Similar Messages

Non Cumulative Cube selective deletion and Reload

Hi,
We have a typical scenario, where in the company code displays # when we execute the inventory reports at plant level,
Upon analysis, we did find the Plant to Company code mapping was not maintained at R/3. Now this was fixed, hence we are planning to do selective reload for that particular plant alone.
Keeping in mind the loading sequence/scenarion for Inventory, can any one advise if we need to do stock init again for this plant and reload the data after selective deletion.
Or can we directly load from the material movement datasource. Will there be any impact ie: at marker update etc.
Note: We already have data into this inventory cube for last 2 years.
The cube contain aggregate compression.
Thanks
Ramesh

Any inputs please
Ramesh

My mail is set up but when I touch the mail icon the screen is blank with a message saying 'no message selected' then goes straight to home page. I have rebooted, deleted and reloaded my email account but nothing is working.

My mail is set up and it comes up with 75 messages received but when I click onto the mail icon the page is blank(White) with the message 'no message selected' and then goes to the homepage. I have rebooted the iPad and deleted and reloaded my mail account but nothing works.

The app is crashing for some reason - maybe an email with a very large attachment or some crappy spam email is messing things up. Quit the mail app.
Go to the home screen first by tapping the home button. Quit/close mail by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the mail app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close it. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If mail still crashes, go to your webmail in a browser and see if you have an email in there that might be causing a problem and delete it. Then try the app again. If necessary, quit the app, restart the iPad and then try again.
If that doesnt help, try a reset. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

IPad won't open iBooks - error message that book isn't formatted correctly, iPad is fully updated and I've tried deleting and reloading iBooks - only thing that has happened between when it used to work and now doesn't is that I took the iPad to singapore

iPad used to open iBooks purchased off iTunes no problems but since I took my iPad overseas on holiday it no longer opens iBooks - they appear to download ok but when I tap to open the book I get an error message saying the book isn't formatted correctly or is in a format that iBooks doesn't recognise. I have tried
- deleting and reloading iBooks
- making all updates have been done
- turning on and off airplane mode
And still have the problems
Did ask iTunes help but so far no joy - appreciate help please

Ok, I got the 1.3/1.4 thing straight now. There was a java.exe in System32 that I now see the PATH was calling first.
And in the TextPad version of the problem, I was curious -- I don't remember setting the specification of the executable called by the Run Tool button, but I must have at some point. I uninstalled the program and reinstalled it and it created a default button that apparently points to what it's supposed to point to, since it now works and runs my program OK.
Still, I wonder how it can be that explicitly directing the button to C:\j2sdk1.4.0\bin\java.exe makes TextPad's Command Results Window say "NoClassDefFoundError"
I'm up and working now, but if anyone has a clue I can learn from on the TextPad issue, thanks

My ipad2 will not play my iTunes video that i just purchased; i've deleted and reloaded, but they still won't play, only the music

My ipad2 will not play my itunes videos that i just purchased; I've deleted and reloaded them twice, but still won't play; plays music only, any suggestions?

You are playing them in the Videos app correct? Music Videos will play the video in the videos app, not in the Music app.

Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Pl;ease help I am on a deadline. Bob

Bridge unable to read cache
Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Restarted computer several times as well. Please help I am on a deadline. Bob

THANKS FOR REPLY,
No, I am on a Mac OS X 20.9.4
BOB

Delete and Reload Vs Create another table and rename to original

Hi
I have a set of summary tables which I have to delete and re-load on a daily basis. Before I take a decision to go ahead with it, I wanted to know if its better to create a new table with the up-to-date summary data and then rename the new table to the existing one. Deleting and reloading might cause the table to be empty for a while, but would there be any issue if i go with the re-naming approach.
Can I know the advantages and disadvantages of both
Thanks in Advance
-G

>
I have a set of summary tables which I have to delete and re-load on a daily basis
>
Partition Exchange is another technique that can be used effectively for this use case.
This technique uses the standard table that you are using now and a new partitioned table.
The partitioned table is a mirror (clone) of the standard and has just one partition (usually a MAX VALUES partition).
The process is as follows:
1. Assume your standard table already contains data and you are ready to replace all data with new data
2. Truncate and load the partition of the partitioned table - the standard table data is available during this process
3. Perform a partition exchange between the partitioned table and the standard table. This is a metadata (data dictionary) operation only and takes a mere fraction of a second. At the end of this operation the standard table now contains all of the data that you loaded into the partitioned table and the partitioned table contains the data that had previously been in the standard table. That is, the tables have 'exchanged' data.
4. Repeat steps 2 and 3 each time you need to load new data.
The partition exchange method allows the current data to be accessible at all times during the truncate and load of the new set of data. Then it becomes unavailable for the fraction of a second it takes to do the exchange. After the exchange it has the new data.
As far as I know this is the fastest way to load new data and make it available without downtime for the existing data.
See Exchanging Partitions in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1107555

I lost my hard drive in my old computer, replaced the computer, merge didn't transfer the I-Tunes files, I have them on my I-pod, any way to get my songs back in my computer w/o deleting and reloading all the CD's?

I lost my hard drive in my old computer, replaced the computer, merge didn't transfer the I-Tunes files, I have them on my I-pod, any way to get my songs back in my computer w/o deleting and reloading all the CD's?

What is the make and model of this recorder? Do you have that information available?
You can still use iTunes to transfer and manage your recorded audio.
iPod: Recording voice memos
B-rock

Selective deletion of Data in DSO in a process chain

Dear all,
Is there any standard functionality that allows to selectively delete the data from a DSO (the three tables to avoid delta inconsistencies) in a process chain? The unique option I could see in standard functionality is to delete the entire content.
Any help will be much appreciated.
Thanks&Regards
Begonia

Hi.
There is standard FM for such purpose RSDRD_SEL_DELETION.
You should write report (SE38) that using this FM and then run this report within process chain with variant.
Please follow the [example|http://wiki.sdn.sap.com/wiki/display/BI/Schedulingselectivedeletioninprocesschain-%28infocube..%29].
Regards.

Selective Deletion and Data Load from Setup Tables for LIS Extractor

Hi All,
We came across a situation where one of the delta in PSA was missed to load in DSO. This DSO updates another cube in the flow. Since it has been many days since this miss come in our knowledge we need to selectively delete data for those documents from DSO & Cube and then take a full load for the Documents filling the setup table.
Now what will be the right approach to load this data from setup table > DSO > cube. There is change log present for those documents and a few KPI's in DSO are in summation mode.
Regards
Jitendra

thanks Ajeet!!!!
This is Sales Order extractor, the data got loaded to ODS just fine, but since the data is coming to ODS from different extractor. Everything is fine in ODS, but not in the cube. Will Full repair request and Full load would it make difference when the data is going to cube? I thought that it would matter only if I am loading to ODS.
what do you mean "Even if you do a full load without any selections you should do a full repair ".
thanks.
W

Selective deletion and repair full request!!!

Hi,
I have one DSO which is receiving deltas from Std extractor and is also serving deltas to many data targets (Both DSO and Infocubes)
Now there comes the need of deleting data in DSO by means of year ( selective deletion )
I know that i need to adjust the data flow from DSO to other data targets myself!!
So after doing selective deletion in DSO, can i update datatargets ( of 3.5 version ) with full update so that data is adjusted in correct format for the subsequnet data targets?
or is there any better option??

Hi Sujith,
Difference between Repair Full and Full Load ;
1. When we want to pull the history data from the source system(SAP R/3) for the first time till yesterday and trigger / enable the Delta load.
For Eg; for your client,when the implantation was done ,when the GO Live started, all the history data(sales,Material,Finance etc) would have pulled from the source systems into BW system and enabled the delta load from next day.
Note: In this scenario ,We use Full Load only for the one time.
2. In most of the scenarios we will use Full Load for the master data (Daily Load). In few scenarios we will use Full Load for the transaction Data Loads. For Eg: in case if there are no changes happening in transaction data daily (like sales data) ,then we go for Full Load for transaction Data Load also.
3. If someone has deleted the data in the data target by mistake which was loaded using 'Full Load' ,then we can go for re-loading the lost data using the same normal 'Full Load' option. In this case if you are using a DSO in between PSA and Infocube then if you don't use the selection parameters(Company Code,Profit Center, Sales Organization etc) for the lost data ,then also it's fine. Because DSO has overwrite option. In case ,if you don't have DSO,then you have to use the selection parameters on infopackage/DTP level depending on from which level you are trying to get the data back. i.e Source System or PSA.
4. We have scenario where the data which was loaded using DELTA load has been deleted from the data target, OR due to DELTA load failure the data didn't get loaded into the data target. Now,we want to get the lost DELTA data back into the target. In this case we can go for using both 'Repair Full' and also 'Full Load'. but depends on the below conditions;
If we want to use 'Full Load' to get the lost DELTA data,then we should block the users in source system(SAP R/3) from posting the data,and clean up the delta queue . Then stopping the daily process chain in BW system which will bring the DELTA data. Then we can use' Full Load' option.
But, If we don't want to disturb the daily DELTA load and if we don't want to block the users in source system, then we should use 'Repiar Full Request". Using this option, the daily DELTA load will not get affected.
Please let me know you are clear with my points.
Regards,
Asha

Since loading Itunes update my Itunes takes about 3 to 4 minutes to load and then when it loads it freezes for about 3 minutes and then unfreezes. This happens with every restart. I've have deleted and reload four times but still get the same results. t

Question: I've have upadated to the latest Itunes software but since doing so I've have had nothing but problems and yes
I have unloaded and reloaded at least 4 times. Now when I try to open Itunes using the short cut on the desk top it takes about 4 minutes or longer for the Itunes to start and then it freezes for about another 2 to 3 mintues and then starts. This happen everytime I try to open Itunes now. I even deleted Itunes from my hard drive and put it on my SSD to see if it would work and still nothing. I've always been pretty good at sloving my problems. But this one has me stumped. Is there anyone who as had this problem that would be willing to help me out. Router25. P.S. It only happen with this one application of software. Everything else loads up fast. This comput is about 1-1/2 years old. Most people would love to have this computer. 9 out of 10. Please help me someone. I ready have a grey beard and it getting grayer.

Restore from backup. If the issue continues, restore as new.

I had mozilla on my pc and it stopped working. I deleted and reloaded it. It won't open. Help!!!

Have had this computer since June. Mozilla was downloaded and worked fine till about a month or so ago. It stopped working. I deleted the download and reloaded it three times. The download took but when I would click on the icon nothing would happen. I think I have windows 8. Is this the problem? Thanks for you help!
B

Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Viber on iPad not working - icon is there but when I tap it it opens for a few seconds and then closes. Have deleted and reloaded withoutr success

Viber on iPad not working although it was fine last time I used it. When I tap on Viber icon the Viber page opens but after a few seconds disappears and I'm back where I started. Have deleted Viber and reloaded but it hasn't solved problem

There have been number of threads over the last few days about Viber no longer working e.g.
https://discussions.apple.com/message/22663682#22663682
https://discussions.apple.com/message/22669304#22669304
https://discussions.apple.com/message/22653073#22653073
The first one of those has a reply from somebody who says that they are from Viber and that they are working on a fix

Selective Deletion and Compression

Hello Folks,
I have cube with some selective deletions, how can I compress the requests if I have selective deletions? Please advise.
Thanks,
Krishna

Hi Kris,
Was this request already compressed from which the selective deletion is performed?
You should have tick mark in your manage section of infocube as highlighted in yellow. If this is the case then you will not be able to compress again.
Else if this request is not compressed and still giving error. Can you provide the screenshot of error? Is it available in ST22? Or can you check the long text of the error when it is displayed?
Thanks
Amit

Selective deletion and reload to DSO to DSO

Similar Messages

Maybe you are looking for