Selective deletion in DSO for current and previous year

Hi,
Can any one give an idea how can I selectively delete current and previous year data (only). is there any process type that can help me in process chains. This should be before loading a fresh load for the same period. this is for psodo delta.
or
any other alternative, plz. suggest.
Thanks
ganesh
Edited by: Ganesh on Jul 7, 2008 12:08 PM

Hi,
If you have any date value example posting date or 0CALMONTH.., you can filter the date using the selection conditions and selectively delete the data.
Process:
Manage of DSO->Contents Tab->Selective (with delete Icon)->Deletion selections->give the period->Execute->Start->Yes->continue.
Hope this helps..........
Rgs,
I.R.K

Similar Messages

Report that display 'Net Pay' by Empl for current and previous period.

Hi,
We are looking for a SAP report that display 'Net Pay' by Employee for current and previous period in USA payroll module. If you know of any, pl let me know.
Thanks in advance,
Niranjan

Thanks Archana and Sikindar.
We knew about this report, however, it gives information one below the other if we run, say for 2 periods, but what we are looking for is something as shown in example below
Empl #      Empl # Name    Prev Pay period Net Pay        Current Pay period net pay.
123              XYZ                     $ 1200.00                                 $ 1200.00
256              ABC                    $ 2000.00                                $ 3000.00
We want to run for 2 periods at a time and get the results as above. That way, payroll dept can run this report and compare if we are paying too much in current pay, compared to previous pay. This is basically to avoid any typos when they create new pay records in infotype 0008.
Niranjan

12 month but devided into current and previous year

hi guys
i have this requirement to disaply amount for current period and previous period for 12 month.
Current period is the period of user entered year and previous period is previous year
So if user enter feb 2007 u2026Then current year is feb, jan ,dec 2006
And previous period is Nov 2006 to March 2006
user is entering the value 0CALMONTH ...and report to need to display 12 month internval betwen years. my problem is how to check the year and interval
please help me without any custom exit? can it be possible thru varibale?

Hi,
I think i misunderstood your question previously.
You can create offsets on CALMONTH and achieve this easily.
1)In the columns are of query disigner, create selections for 12 months by using CALMONTH and offset each field by -1 or -2,-3,-4 ..... -12.
2) Create a Text Variable to show the month Value in column header
3) Create a structure in columns area and place it below all the CALMONTH selections
4) Include all your Key Figures inside the structure.

Parameter for current year and previous year

Hi all,
I currently have 2 reports where the query is the same except in the where clause I have it filtered to current year and previous year based on the List_Date. I would like to make this one report with a parameter of Current or Previous year.
Would I create 2 more datasets one for current and another for previous? I would think there is a easier way. Any help or direction would be great.

If you define a parameter in SSRS, you can use it's value in your query. Just make sure the parameter name, and CASE (SSRS is case sensitive when it comes to parameters) are the same in SSRS and your query. There's a parameter tab on the dataset properties.
It SHOULD auto fill, but it never hurts to check, just in case.
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
Yes it did auto fill the parameter tab in the dataset and I get a parameter to enter the year when I preview the report. Still a little confused on how I do current or previous year. Are the next steps what I need to do?
@yearParam parameter:
1) Create Available or Default values
2) Current and Previous year as label
3) For Value do I need to use a expression for current year =Year(now()) and previous Year?
4) Add a filter on the tablix for list_date?

Hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop

hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks

teddyscroggins wrote:
…have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks
That is precisely the WRONG thing to do. You should never delete, but uninstall.
Now you need to look for, download and run the Adobe CS Cleaner tool.

BEx - Display current year and previous year by day on the same row

Hello experts, need some help/suggestions on how I can accomplish the following please.
We have a requirement to show MTD revenue by day for the current year and previous year. The desired result will have the following columns
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2009       |      15,131,005                    |        15,138,668
11/02/2009         |    15,055,345    |                        15,523,762
However, the result is showing up as follows:
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2008       | |                                                   15,138,668
11/02/2008       | |                                                   15,523,762
11/01/2009       |      15,131,005 |
11/02/2009       |      15,055,345 |
The number of rows for Calendar Day varies depending on the date the user selects. We only want to display the days for the current year with the Previous Year Column on the same row.
Can someone please let me know how I can get the results to display on one line for each day?
Thanks,
David

I have the same issue on my end, and am interested in responses. I searched the forum and found this suggestion in another post; not sure if this solution will help, but it looks like it might. This was a response from poster RadhaN:
RadhaN
Posts: 390
Registered: 8/27/09
Forum Points: 876
   Re: a simple query to show sales versus last year on daily basis/
Posted: Sep 21, 2009 9:53 AM    in response to: Shlomi Weiss           Reply
HI Shlomi
Create a virtual characteristic in your infoprovider that can calculate the day from calendar Day. In ZXRSRZZZ while adding code for this virtual characteristic use the function module DATE_COMPUTE_DAY to compute the day for every calendar day.
For calculating Sales Current year, create a restricted ky figure with Sales as the key figure. Add 0CalDay to this RKF and create a variable for this infoobject(Eg: ZCURYEAR) that will receive input from the user for the range of dates eg: 08/16/2009 - 08/22/2009.
For Sales Prior year, create another restricted key figure with Sales. Add 0CalDay to this RKF and add a customer exit variable. In the Customer exit code use the ZCURYEAR variable and offset it to prior year in both the upper and lower limits. This should work.
I hope this helps.
Thanks.

Key figure comparision between current year and previous year

Hello collegues,
I have created a WEB Intelligence report with key figure ROI (return on investment which is calculated out of three other key figures (capital, revenue and costs). I would now like to calculate the percentage period (year) differences between key figure ROI - between current year (month) and previous year (month).
Do I have to add coding within a key figure formula within WEBI Rich Tech client or within universe builder.
The key figures were extracted from SAP BW and added to a universe which is basis for WEBI rich tech client report.
thanks and regards,
Christian

Hi Stratos,
so I see - i have to use the variable Editor and then define a measure and add coding in the formula field. Do you have an e-mail address ín order to send you the report and explain in more detail what I would like to see - here it is not possible to upload a report...
thanks and regards,
Christian

Displaying current year and previous year's data.

hi all,
we have fields like doc.no, company code, costcenter, posting date, year etc... in a query.
we are using this query to display data in VC,
how can i display the current year and previous year's data in two different tables using the available fields.
any help will be highly appreciated.
thanks,
Rk

Hi Rk,
You can achieve your requirement using 'Filter' operator. Drag one 'Filter' operator into visual composer story board and drag the output into filter and add condition(Check year=2008) and drag one table from filter. For another table use another filter and change the condition.
Hope it helps...
Regards
Basheer

Current year and previous year

Hi All Grus,
i have a one requirement user will give input 30.04.2009 . the output should show last ten days including user entered date like 21.04.2009 to 30.04.2009 for current year and previous year
this current year and previous should show column wise in row wise i need year like given below
user input: 30.04.2009
row            column
21.04.09 22..04.09. 23..04.09 .............................................................. 30.04.2009
2009       100          200            300         ...............................................................     500
2008        200          300          600          .................................................................    1000
Edited by: kek.uthayakumar on Aug 4, 2009 7:57 AM
Edited by: kek.uthayakumar on Aug 4, 2009 7:58 AM

Hi
You need to have customer exit variable on this calday and write code to obtain your logic. Search in SDN for sample codes:
enter information required in search forum SAP Business Explorer (SAP BEx)
Regards
Ravi

Selective deletion frm DSO based on selection in csv file on AL11 directory

Hi Experts,
I have a requirement where I have to automate the Flat File Upload coming from AL11 SAP directory followed by the selective deletion from DSO with the selection in the Flat file (.csv) on the directory.
The csv file having fixed name and column. We have to take first selection i.e. Date (single entry) from second column and Comp Code from the 4th column (multiple entry).
based on both the selection i have to perform selective deletion and then file upload.
Could anybody please help me to write code and steps.
Thanking you.
Regards
Ajay

check this where i have written in start routine
CALL METHOD P_R_REQUEST->get_TGT
RECEIVING
R_TGT = I_TGT.
CONCATENATE '/BIC/A' I_TGT '00' INTO ACT_TABLE.
CONCATENATE '8' I_TGT '_VA' INTO ACT_TABLE_RSTSODS.
DATA: SOURCE_PACKAGE1 LIKE LINE OF SOURCE_PACKAGE.
READ TABLE SOURCE_PACKAGE INTO SOURCE_PACKAGE1 INDEX 1.
DELETE FROM (ACT_TABLE) WHERE /BIC/ZVERSION =
SOURCE_PACKAGE1-PL_VERSION.
SELECT SINGLE ODSNAME_TECH FROM RSTSODS INTO ZDSNAME_TECH WHERE ODSNAME
= ACT_TABLE_RSTSODS.
DELETE FROM (ZDSNAME_TECH) WHERE /BIC/ZVERSION =
SOURCE_PACKAGE1-PL_VERSION.

How to Set NLS parameters in SqlDeveloper for current and future connection

Hi
I've downloaded sqldeveloper version 1.5.4(build main-5940)
when I try to set NLS parameters as following it is thrwoing following error
TOOLS->PREFERENCES->DATABASE-->NLS parameters
on right side pane
I've changed
SORT----->BINARY_CI
COMP----->LINGUISTIC
then it is generating following log file
SEVERE     43     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:ORA-00600: internal error code, arguments: [qctosop:like transform], [], [], [], [], [], [], []
SEVERE     44     114     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     45     7     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     46     9     oracle.dbtools.db.DBUtil
SEVERE     47     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     48     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     49     5     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     50     0     oracle.dbtools.db.DBUtil
SEVERE     51     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     52     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     53     5     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     54     0     oracle.dbtools.db.DBUtil
SEVERE     55     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     56     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     57     4     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     58     0     oracle.dbtools.db.DBUtil
SEVERE     59     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     60     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     61     4     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     62     1     oracle.dbtools.db.DBUtil
SEVERE     63     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     64     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     65     5     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     66     0     oracle.dbtools.db.DBUtil
SEVERE     67     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     68     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     69     6     oracle.dbtools.db.DBUtil     Closed Connection
SEVERE     70     0     oracle.dbtools.db.DBUtil
SEVERE     71     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
SEVERE     72     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
please help me to set NLS parameters for current and future connections.
thanks,
harry

Hi -K-
actually I want to make SqlDeveloper to make case insensitive search.
when I google, I've found to make oracle as case insensitive I need to set NLS_SORT to Binary_CI and NLS_COMP to LINGUISTIC
Default SQLDEVELOPER NLSParmeters values are as NLS_SORT---->Binary and NLS_COMP--->Binary
Now I want to make these as NLS_SORT---->Binary_CI and NLS_COMP--->LINGUISTICS.
thanks,
harry

Availability of Win 10 Drivers for *Current* and *New* Systems

I was wondering if there is any timeframe for posting Windows 10 drives for *Current* and *New* Systems. I notice that there are only like 3 drivers posted so far for the X360 laptops. Even the brand new models which come with Windows 10 preinstalled still have only a smattering of drivers posted. Obviously the drivers exist since the system ships with them installed, why can't they be posted for download? I can understand driver availability taking some time for systems that didn't ship with Win 10, but for those systems that ship with Win 10 already loaded shouldn't those drivers be available to your customers on the the very first day of product shipment? In case you are wondering why it matters if it comes preinstalled already, it's because I plan on doing new, clean install of Win 10 Professional. Your systems are shipping with the Home edition. I have an X360 that is still being sold and shipping with 8.1. I would walk into Best Buy today and buy another one that comes with Windows 10, but won't do that until drivers are available so I can do a clean install. Thanks.

digitaldocent wrote:
After replacing a failed internal hard drive on my HP Pavillion dv2500 laptop, I installed a new Win 7 operating system rather than the Vista software that came on the computer. After installing Windows 7 using a CD/DVD and a few other CD/DVD-based programs, my CD/DVD is no longer working. It's now missing the device driver. Searching HP Laptop Drivers, I find a replacement driver for all operating systems except for Win7!
??? >Where can I find updated/compatible Win7 drivers for my notebook to restore all of it's original features?
??? >Can I install the Vista64 drivers for the original device drivers that came with the Vista operating system if Win 7 drivers are not available?
NVidia provided updated drivers for the graphics chip that installed fine.
Model: HP Multimedia Pavillion dv2500
Running 4 Gb of ram, new 500GB internal HD (500GB external), Win 7 32 bit operating system
Thanks,
John

Hotkey for "next frame" and "previous frame",or for next and previous layers

Hi,
I'm an animator and I love drawing with Photoshop's brush tools, but to animate I need to "flip" - which is just rapidly switching from one drawing to another, as you would with sheets of actual paper: hunting and clicking on arrows isn't feasible.
Hotkeys, or assignable hotkeys, for next and previous frames in animation - or, simpler, hotkeys for next and previous layers - would solve this problem completely. This simple improvement could make Photoshop a viable animation program, competitive with Plastic Animation Paper and Flipbook.
Is there at least a way I can download an add-on that would do this?
Thanks,
Joe

Do you mean something like:
http://help.adobe.com/en_US/photoshop/cs/using/WSF7DD9B60-7866-4f01-915E-DE39F672E418a.htm l
http://help.adobe.com/en_US/Photoshop/11.0/WSF7DD9B60-7866-4f01-915E-DE39F672E418a.html

YTD and and previous year to date as variables

HI All,
If your cube doesn't have YTD and and previous year to date as variables to use - can these be created?
Regards J

Hi,
Yes it can be staged in cube but you need to write routine and transformation/update rule level.
If you need for some query requirement then you may achieve the same at query level. For this you need to create some Restricted Key figures by restricting your key figure with Calyear/month as per your need.
Query level approcah will be much easier then the cube level.
I hope it will help.
Thanks,
S

Calculationg current and past year for a Analysis report in obiee 11.5

Dear All,
Need some help here.
I am a beginner in OBIEE and need some help to build a report in obiee 11.5 as described below;
I need to create a PnL report such that I show current years profit and loss AND prior year profit and loss figures in a report side by side for comparitive analysis for user.
My data is an essbase database, and have a years dimension with values 'current year' , 'F08', and 'Prior Year'. and other measurs such as revenue, % revenue, gross profit, cost of sales, operating expenses etc. (I am using 107 from oracle downloads) for obiee 11.5
There is another dimesion called time period with members as Q1, Q2, Q3, and Q4, and each having respective months (e.g. Jan, Feb, Mar for Q1 etc)
I also have a scenario dimension with members as Actual, plan, Forecast, Wht -if..
Now I need to create a this report.
I created this report based on approch no 1 below;
Appraoch 1
- Create two analysis reports with all the above columns.
- specify filter for year column equal to current year for first report
- specify filter for year column equal to prior year for second report
- create a dashboard with a promt (radio button) based on column scenario
- create two sections placed side by side below the promt and place above two reports in those two sections so that they appear side by side
Nw when I run this dashboard, it works fine, and shows me the current and prior data for actual, plan etc...
BUT....
I need to create the same reports using a single analysis report instead of two separate reports with hardcoded values for year filter.
Now I tried use AGO funtions on but , it requires a column with numerical value so that it can calculate the past year, but in my case year is a column hving text value and hence i cant use it.
I would like to know how to build such a report using any other variable or function or any rpd level modifitions.
If I had a year dimesion with numeric values, then how would I use to calculate the past year once u select current year .?
Let say values are 2012, 2011, 2010 etc. so If I select 2012 as current year, I should get data for 2012, and 2011, if I select 2011, then I should get data for 2011 ,and 2010.
Please help me to build logic either at analysis level or at repository level
Thanks and Regards
Santosh

Hi,
As per I understand your requirement,
In Pivot table, place 'Year' in pivot columns instead of rows.
Create an SQL filter on Year and put the condition as:
*"Year" BETWEEN @{Presentation_Variable} - 1 AND @{Presentation_Variable}*
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

Selective deletion in DSO for current and previous year

Similar Messages

Maybe you are looking for