Selective erase Master data in BACKGROUND

Hi guru!!!
I have to erase some wrong master data records of a infoobject very used ( 0CUST_SALES).
When i try to do it in mantenance of the infoobject, selecting the wrong record and deleting them, the system do it in dialogue and i have a Runtime ERROR.
To avoid this runtime error i want to do it in BACKGROUND.
Can somebody tell me if it's possible erase some record ( not all ) of Master data Infoobject in BACKGROUND???
Thank you very much!!!!
Bye

Hi,
You can not delete master data if that infoobject is included/used by any infoprovider.
make sure that master data records has no transaction data exists then only u can delet
You can goto--> maintain master data of that infoobject and select the particular record and delete it selectively.
Use program - RSDMD_DEL_BACKGROUND in SE38 and give the variants for ur infoobject
Thanks

Similar Messages

  • How to activate master data in background ?

    Hi All,
    I  would like to know How to activate master data in background ?
    When I try with right clic on infoobject and choose activate I have a time out
    Thanks for your help
    Sebastien

    Nikhil
    This method is to activate the structure in development server
    I want to activate the master data after an upload with a DTP in production

  • Read PP Master Data in Background

    Dear Expert,
    is there any possiblity of Read PP Master Data in background when planned order converted into production order. or any background job we can run in background daily.
    Regards,
    Dev

    Dear,
    You will have to develop a custom logic to automate the read PP master data transactionplease take help from technical consultant.
    Also refer this thread,
    Read PP master data
    Regards,
    R.Brahmankar

  • Set Selection Load Master Data

    Hello
    I need to load customer master data from BW but I need to select only the customer wiht attribute Delete Flag is blank.
    If I select
    Delete Flag =
    Is not working. How BPC understand blank?
    Message was edited by: Ariane de Souza Pinto

    Hello Nagarjuna!
    I tried Delete Flag = "" and not worked:
    No records are returned from ZBPCSHPTO
    And It don't have the option <>.

  • Query Def. Filter Value Selection - to master data wont activate

    Hi, I want to change the info object properties Query Def. Filter Value Selection to select Values in master data, but when I try to activate it, it goes back to the old selection "only values in info provider" is this because there is data already loaded and so it wont allow me to change or is there anything simple I am missing ??
    Reason being I do not want to delete the data to make this setting in the info object maintanence...

    hi ram,
    Before u activate try "Checking" the Infoobject definition and see if you get any warning/error messages.
    Then try activating it.
    hope it helps,
    regards,
    Parth.

  • Specific Field Selection for Master data

    Hi Gurus,
    I am looking for a master data field which is suitable to my requirement.
    Requirement : We have GL accounts and loading data into Hyperion. in Hyperion they are doing data summarising GL Accounts to FRP Codes. Lets say we have 2000 GL account and they are reducing to 150 FRP Codes. This FRP contains different description as well. Mapping between GL account and FRP Codes is in Flat File, right now we want to upload FRP values thru this flat file but in the future when we create new GL Account using FS00 we need to update FRP Codes in the respective master data fields.
    We have SKA1 and SKB1 (GL account master data tables). Please some tell me which are the field in this tables or any other tables use for my requirement. My client dont want to go for Generic. I m not FI consultant......
    Thanks
    Ganesh.

    Do you want to maintain GL Account - FRP Code data  ..? or Just FRP Codes from Flat Files.
    If it is just FRP Codes from flat file then when you create InfoObject for FRP code, also create data flow and load the FRP values
    My recommendation here is that, instead of maintaining seperatly for GL Account and FRP codes combinations, I am suggesting you go by adding FRP code to 0GL_ACCOUNT infoObject.
    when you maintain Enhancement in the R/3 system where you do look up in SKA1 or SKB1 tables ..we are straight way getting even FRP Code from R/3 system. So, when a new GL Account records is extracted to BI system, you also bring the FRP Code for that GL Account (as it populated in the code)
    Hope I have said you need otherwise, please give a detail on how you want to maintain with an example..
    Regards,Vj

  • How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

    My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
    (128 GB available, my backup size is 170GB but the time capsule is 998GB)
    I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

    Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
    http://pondini.org/TM/Time_Capsule.html

  • Displaying master data attribute of selected variable

    Hi friends ,
                I have a requirement to display the master data attribute of the material number selected by the user from the drop down help . We are using Web Layouts for user interface.
      For solving this i have developed a BSP application which calls the FM - ZVARIABLE_GET_DETAILS ( given by SAP in the HOW to for variables of type exit ) and gets the value for the variable of Material number. For this value I run a select on master data tables and display the attributes on the BSP page.
    It work fine when the user opens his web layout for the first time . However when the user changes the Material no fromt he dropdown  my BSP still displays the old material numbers attributes . In debugging I found that the FM -ZVARIABLE_GET_DETAILS  is still giving the old value of the variable.
    Please let me know how can i get the correct runtime value assigned to the variable ? It seems the FM ZVARIABLE_GET_DETAILS  gives the value which was saved last by the user.
    thanks in advance

    Hi BSPIAN,
    you may have missed a hint in the How-to paper.
    The value of the variable l_buffer_call (TYPE boole-boole) should be switched from 'X' to ' ' in order to avoid buffering the values. Then your FM will be called each time the value of Material changes.
    Hope it workes!
    Regards
    Steve

  • Master data needs to be appeared for variables in BPS

    Hi everyone,
    I am working in BW-BPS environment. We have to create a variable on the Company Code infoobject in the planning area. When a user wants to enter the value for the variable 0COMP_CODE, all the master data values should appear. But in the replacement type for a variable doesn't contain this option.
    So please let me know how to achieve this requirement. If USER Exit needs to be seleted, then let me know the procedure to implement the same.
    Also we are using a Flat file to input the values into BPS environment. Currently I am using the Tab Deleimited Text file to do the same. But the user want .CSV file as input. So is there any way to convert the file?
    The user will input the Planned amount in local currency, & we have implemented a Currency Translation Planning function in the Planning Environment. Once the data has been loaded thru flat file the user should execute the planning function & save the data to persistently store the data in the Real time infocube. Here user wants the Currency translation function to be hide & the currency conversion should happen automatically when the user saves the data he entered.
    Narendra Reddy

    Hi.
    Related to variable: if you want to show for selection ALL master data simply create variable with type "Characteristic Value". Attach characteristic to your variable. Set "Replacement Type" = fixed value and in "Selection Conditions" set "From" = 000000 (accoding to lenght of characteristic) and "To" = ZZZZZZZ. This will give you all master data in variable.
    Related to currency convertion: create function type "currency convertion" and add it to global planning sequence. Run this planning seq according to your needs and execution of conversio will be in background.
    Regards.

  • Master data/text of characteristic 0MATERIAL already deleted

    Dear BW Experts:
                    I'm getting this error message when I tried an extraction into an infocube.
    "Master data/text of characteristic 0MATERIAL already deleted"
    Before the extraction, I've loaded the characteristic 0MATERIAL succesfully.
    Can anyone help me? any clues?
    Thanks in advance.

    Hi All,
      We have also received the "Master Data has been deleted" error message. If you delete (or try to delete) the master data for a characterstic, you will get this error message for the next transaction data load. Just mark the failed request to red and back it out from the data targets and then try loading the data again, this time you will not get any error message.
      It will only give that error message for the first load after the deletion of master data.
      Now coming to the second point. How to delete the master data?
      As all of you know, we delete the master data by selecting delete master data from the context menu of an infoobject. This deletes all the master data records that are not currently being used in any of the infoproviders, hierarchies etc. In the system log (transaction SLG1), it will show what are all the records that got deleted and if a record is not deleted it will let you know where that master data is being used.
      Now the problem with deleteing master data in this way is, this runs in dialogue mode and if the no of infoproviders and data volume in those infoproviders is huge it will take very long long time to complete you will get a time out message. There is a function module "RSDMD_DEL_MASTER_DATA" , to run this in background you need to create a ABAP program and migrate it all the way to Production and run it in production.
    Luckily, there is a SAP delivered ABAP program which we can use to delete master data. That program is "RSDMD_DEL_BACKGROUND", run this program in back ground with the input parameters as mentioned below.
    P_IOBJNM - Infoobject name.
    P_CHABNM - Infoobject name.
    P_DELSID - X
    P_DELTXT - X
    P_OBJ  - RSDMD
    P_SUB  - MD_DEL
    P_EXT - MDDEL_Infoobject name_BG
    You can verify in system log, which records got dleted and which are not deleted.

  • Deleting master data after loading transactional data using flat file

    Dear All,
    I have loaded transaction data  into an infocube using a flat file . While loading DTP i have checked the  option "load  transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
    While loading the flat file, I made a mistake for DIVISION Characteristic  where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
    But when I see the master data for DIVISION , i can see a new entry  with value '4000'.
    My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
    I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
    Please suggest me on this.
    Regards,
    Veera

    Hi,
    Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
    If this master data is not used any where else just delete the master data completely with SID option.
    If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
    Hope this helps
    Akhan.

  • To delete unsed master data's in info object

    Hi.,
      Can any one please tell me how to delete unused master data's in an info object.
    Thanks,
    Selva

    Hi,
    Select the info object fro which you want to delet the data. Right clik on the info object and select delet master data. This will delete all the matster data whcih is not used any where in transaction data. The data which is used will not get deletd. Save the data.
    Hope this helps.
    Regards,
    Amol

  • Master Data Deletion in SAP BW

    Hi,
    We are having HR Master Data in BW - 0EMPLOYEE. User has deleted some of the personel numbers in the source system (SAP HR system) as the contract of the employee was ended.
    My problem here is that the Personnel numbers are still existing in SAP BW - 0EMPLOYEE master data. Eventhough when i am trying to delete these un wanted personel numbers in maintain masterdata screen, that are not allowing me to delete as they have used some other placess in Transaction data.
    Can you please suggest me, how to delete this specific Master Data in SAP-BW?
    Best regards,
    Venkata Challapalli.

    Hi,
    Why do you want to delete ?
    No need to delete any Master Data
    If you want to really delete ,you can do one thing
    Right click on Master data Info Object 0EMPLOYEE
    select Delete master data
    And reload Master data for employee with full load
    if delta Initilize delta with data transfer
    Regards
    Hari

  • Web report data provider change from Master data table to InfoCube

    hi Experts,
    I have created one report on top of multiprovider but in the selection screen when i check the values for a variable I came to know that data is coming from master data table and not from data provider(InfoCube).Can any one help to change the data selection from master data table to data provider(InfoCube) and i am sure that there is no ODS involved in the multiprovider.
    Thanks in advance
    With Regards,
    Bala

    Hello,
    If u are using Analyser then just put a Analysis Grid on the output of the query(should cover all the rows and column) , click on the grid and put the dataprovider. and do auto fit.
    Rohit

  • Master Data with text upload

    Hi expart,
    I have created customize infoobject for master data upload. Following steps I have done :
    1. Create info object for master data upload
    1.  Create Datasource( RSO2) in R/3 with text option ( R/3 table feilds code, description)
    2.  Replicate data source ( BI)
    3. Create transformation ( BI )
    I am unable to map description with info object.
    Pls. help which step I am missing.
    Thanks in advance,
    Goutam

    Hi Gautam,
      Check the properties of Master data infoobject.
    In Master data/texts tab page.
        i.       Select With master data and With texts if they are not already selected.
       ii.       In the field below Character. is InfoProvider, enter the technical name of your InfoArea and confirm your entry.
                   The system sets the indicator Character. is InfoProvider.
       iii.       For the characteristic  Select the indicator mentioning short/medium/ long text.
    Then activate the master data object. Now try to create the transformation...
    check the below link for step by step procedure..
    http://help.sap.com/saphelp_nw04s/helpdata/en/46/94bc9ab90819aee10000000a11466f/content.htm
    Edited by: Priya.D on Mar 15, 2010 9:43 AM

Maybe you are looking for