Selective hierarchy load

Hello all,
My customer wants to restrict the F4 help on the ORG UNIT hierarchy to a certain node and the nodes below. As far as I know, the only way to do that is to use another hierarchy.
Is ist possible to restrict the nodes to be loaded from R?3?
Thanks in advance, Natali

Natali,
I believe the BW hierarchy infopackages are developed to display only the "top nodes" of hierarchies.
Using the example below, only the TOP NODE will appear as a selection within the hierarchy infopackge. User will not be able to select "Level 2" or "Level 3". However, node data for levels 2 & 3 will be included as part of the extraction.
TOP NODE
Level 2
Level 3
If you have a need to extract only node data for lower nodes, you may consider remodeling the hierarchy in R/3 where Level 2 of the current hierarchy becomes the top node of a new hierarchy.
TOP NODE (previously level 2)
Level 2 (previously level 3)

Similar Messages

Hierarchy loading Error in Production system

Hi All,
I am loading Hierarchy file, the file is there in application server(AL11), in external tab i gave same path. but when i try to load it is showing below Error message.
Invalid entry, hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Diagnosis
Hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Procedure
If the underlying InfoObject supports hierarchies create the hierarchy and try again.
If hierarchies are not supported, select another InfoSource or change the definition of the InfoObject.
That means Hierarchy file problem (OR) In Info package I selected Hierarchy selection problem?
Kidnly help on this issue.
Cheers,
Srikanth.
Edited by: srikanth on Apr 21, 2009 11:49 AM

Is this only happening in your production system? Have you tried loading the hierarchy file to your development or acceptance system?
I've seen this error occur when the authorizations are not set up for loading hierarchies (i.e. maybe they can only be loaded via process chains under the remote ID used for process chains, and not using your own ID). That's why I was suggesting you try to load the same file to your dev and acc systems and see if you get the same error. Sometimes this error is thrown for other reasons and does not really have to do with the file being loaded or the hierarchy missing.
Also, if you're loading from the App Server, double-check that you have the Application Server radio button selected on the tab where you select the file path.
Good luck!

0CUST_SALES_LKDH_HIER Hierarchy load issue

Hello,
The Hierarchy load from the datasource 0CUST_SALES_LKDH_HIER to a time dependent InfoObject is failing with the below error:
Node [000073, 000075]: Leaf '006766765' already as child of node 000069.
I have checked in the KNVH table in R/3 and I found two entries for 006766765 with 'valid from' and 'valid to' dates as below:
Can some help me on this issue? Is this scenario valid?
Thanks,
Prateeksha Kalyani

With your client permission try to delete extra entry from source table.
About deletion you can check with ABAP Team with help of functional team.
Like in bw selective deletion at cube level, please check with abap team is there any option to delete selected entry from table?
if not then ask them(ABAP) to write a program to delete extra entry.
Even you can at try to check ABAP forum as well. you may get more possible options.

Error in WBS Element Hierarchy load after ECC 6.0 Upgrade

Hi All,
After ECC 6.0 Upgrade in R/3, we are doing test load in a Test server. While doing, we have encountered an issue with 0WBS_ELEMENT Hierarchy load. The message in the monitor is like below.
"Node ID 00014240 has not been included in the hierarchy
Message no. RH207"
When I run the same hierarchy in another system which is not upgraded , it works fine.
Anybody has faced similar kind of issues and can throw some light on this issue?
Thanks,
Mohan

Try activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
Thanks,
Amit

0ORGUNIT Hierarchy load failure in BW, Source system : CRM

Hi Experts,
From last 3 days 0ORGUNIT hierarchy load was failing.Iam getting below messages.
Node 25047465 already exists
Node 25034957 already exists
Node ID 00006105,Char.Value 25081567,exists several times under node id 00003508
Node ID 00005752, Char Value 25081567,exists several times under node id 00003150
1. Assuming that node values were changed,in order to bring AS IS how hierarchy is there in source and fresh reload will correct the duplications, I have deleted existinsg Hierarchy,and tried to reload Hierarchy from CRM system. But now i am not able load and getting same error and my old Hierarchy also deleted.
2.Could you please help how we can check the 0ORGUNIT hierarchy in CRM system, I have checked through Tcode PPOSE, There i'm not getting any duplication of records i.e i have single value for the respctive Char Value.
3.We cannot check Hierarchy data through RSA3 or in the PSA how can we check how we are getting data from source system
Looking for your Help
Sree.
Edited by: Sree216 on Oct 3, 2011 3:50 PM

Hi Sree,
Seems like Hierarchy structure is not correct in CRM. I have seen this issue, but loading data from another client (Where structure is correct) usually resolved my issue.
not sure about CRM, but in ECC there are different Tcodes to see hierarhcies ( depends upon the Area). E.G to see profit Center hierarchy you can use KCH3 in ECC.
Regards
Amandeep

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Problem during hierarchy load from ECC 6.0 to BW

Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?

The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM

How to calculate selected hierarchy only

Hello,
I have simple planning application (Hyperion 11.1.2) with all mandatory dimensions.
*"Entity" dimension looks like this:*
COMPANY_1
COSTCENTRE_1_1
PRODUCTIONLINE_1_1_1
PRODUCTIONLINE_1_1_2
PRODUCTIONLINE_1_1_3
COSTCENTRE_1_2
PRODUCTIONLINE_1_2_1
PRODUCTIONLINE_1_2_2
COSTCENTRE_1_3
PRODUCTIONLINE_1_3_1
PRODUCTIONLINE_1_3_2
COMPANY_2
COSTCENTRE_2_1
PRODUCTIONLINE_2_1_1
PRODUCTIONLINE_2_1_2
PRODUCTIONLINE_2_1_3
COSTCENTRE_2_2
PRODUCTIONLINE_2_2_1
PRODUCTIONLINE_2_2_2
COSTCENTRE_2_3
PRODUCTIONLINE_2_3_1
PRODUCTIONLINE_2_3_2
Users from COMPANY_1 and COMPANY_2 import data into essabase (Level0 members) using EAS. Separately for each company and in different time.
My problem is:_
Now, I am trying to prepare calculation script which should calculate all "Measures" and aggregate Entites data for only one selected hierarchy (COMPANY_1 or COMPANY_2).
Something like this (but this is not supported in essbase (11.1.2)):
FIX ("January", "Local", "HSP_InputValue","FY11", "SAct", "VCurrentApproved", *@IRDESCENDANTS("COMPANY_1")*)
CALC DIM ("Measure", *"Entity"*);
ENDFIX
Thank you for any inspiration.
Vladislav

Hi,
Modify your business rule as below and have your users run the calculation from Planning. Assuming they've got access to their entities only, they will be able to select their entities only and this should only aggregate the selected entity:
FIX ("January", "Local", "HSP_InputValue","FY11", "SAct", "VCurrentApproved", @RELATIVE({COMPANY},0))
CALC DIM ("Measure");
ENDFIX
FIX ("January", "Local", "HSP_InputValue","FY11", "SAct", "VCurrentApproved")
@IDESCENDANTS({COMPANY});
ENDFIX
Cheers,
Alp

Selective data load and transformations

Hi,
Can youu2019ll pls clarify me this
1.Selective data load and transformations can be done in
    A.     Data package
    B.     Source system
    C.     Routine
    D.     Transformation Library-formulas
    E.     BI7 rule details
    F.     Anywhere else?
If above is correct what is the order in performance wise
2.Can anyone tell me why not all the fields are not appear in the data package data selection tab even though many include in datasource and data target.
Tks in advance
Suneth

Hi Wijey,
1.If you are talking about selective data load, you need to write a ABAP Program in the infopackage for the field for which you want to select. Otherway is to write a start routine in the transformations and delete all the records which you do not want. In the second method, you get all the data but delete unwanted data so that you process only the required data. Performancewise, you need to observe. If the selection logic is complicated and taks a lot of time, the second option is better.You try both and decide yourself as to which is better.
2. Only the fields that are marked as available for selection in the DS are available as selection in the data package. That is how the system is.
Thanks and Regards
Subray Hegde

Selective data load using DTP

Hi,
We have created a data flow from once cube to other cube using Transformations. Now we would like to do selective data load from source cube to target cube. The problem is that in DTP we are not able to give the selective weeks in the Filter area because we can give filter conditions in change mode only and in production system we canu2019t go to change mode for DTP. So we struck up there. Can any one of you tell me how to do selective data load in this scenario
Thanks in advance

Hi,
As a try, createe a new DTP and try to get in to change mode.It might accept that way.
otherway round,you can go the way as manisha explained in previous post.
Do the load and do a selective deletion. you can do selective deletion using a program.
Cheers,
Srinath.

What does per Wlan Band select and load balancing do ?

Good morning.....We recently upgraded our controllers from 4.2.185 to 6.0.188 and have noticed many clients having connectivity issues. We have Aggressive load balancing turned off globally but have noticed that band select and load balancing are enabled on the
Wlan. Are these settings mutually exclusive or do they do the same thing ? Does the Wlan setting override the default ? We have noticed that there is
output doing "debug dot11 load-balancing"
Thanx.....Dave

I believe we never had load balancing turned on when running 5.2 code. We jumped from 5.2 to 6.x temporarily and then to 7.0 within a 30 day time frame this summer. We're a large university and we had very few users on WiFi during that time.
The Macintosh laptops are having nothing but trouble since school began, and I have gone over everything and found that band select is turned on as well as load balancing. Since band select didn't exist in 5.2 (I believe) I know it wasn't on. As for load balancing, I don't believe it was on, and I discovered it was turned on when recently reviewing our configs.
The Macintosh laptops have been debugged and our Mac gurus tell us they're getting a message that equates to "the AP is busy, or the AP is full". This leads me to believe that load balancing got turned on during the upgrade and we didn't notice, which caused the Macintoshes to have issues.
We don't have any VoWiFi clients so we don't have to support them, and we don't officially support smartphones, either.
I turned off load balancing and will see how it goes....
Thanks!

Hierarchy loads taking a lot of time

We have a issue of Hierarchy Loads ruuning for a long time. One suggestion we got is that runtime can be reduced by "Increase the parallel processing during extraction"...
How could this be an effective solution for this and any inputs for this are appreciated.
Regards,
Venkat.

Hi Nilaksha,
actually,its a QC form,where the end user is giving values for an item which has 10 sublots,he his passing the values for 10 sublots(no,sample,quantity,uom,date).
The table is QC_SMPL_MST where he has taken the base table common for different data blocks.
No i am not using any pre-commit statements,using the database information for retieving the item_no and sub_lots

Master Data & Hierarchy loading into BPC from BW

HI all,
When i am getting master data and hierarchy from BW i need to replace a "-" to an "_".
These members are parents in BW.
I was able to do that using a conversion file for the master data. But when i run the hierarchy package it says parents dont exist because the nodes that were pulled before are not with a underscore and not a dash.
Ex: XXXX-XX needs to be replaced as XXXX_XX.
This member is a parent aswell. So i need to add conversion in the hierarchy load. I did that but its not taking it.
Conversion file for hierarchy load looks like this:
External Internal
XXXX-XX XXXX_XX
I am on BPC NW7.5 SP6.
Thank You all.

I think conversion file string manipulation for BW infoobject hierarchy imports has some issues. I suggest reporting the problem to SAP support by creating a message on the Service Marketplace. Please be very clear in the message about your setup and how to recreate the problem and why you think it is a bug so that you don't receive back a reply about it being a consulting issue. Expect some time to work through this with support and eventually development, with the goal of getting a correction note released to fix the issue.
In the meantime, you might try to do the string manipulation in the transformation file *MAPPING section instead of the conversion file.
NODENAME=NODENAME(1:4)*STR(-)NODENAME(5:6)
or substitute NODENAME above for PARENT if that is appropriate level with the issue.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Hierarchy loading in Import Manager

Hi,
I have the following scenario to load Hierarchy but Import Manager is throwing an error message ' Duplicate in Clomn-2".
However the same structure I am able to make in Data Manger manually for a 3 level hierarchy which confirm that hierarchy table supports that structure.
Column1   Column-2
(parent)    (Child)
                3M
3M           Abrasive
Abrasive    Roll
3M            Coil
Coil           Copper
GE           Abrasive
SH-Ent     Coil
The data shows Manufacturer 3M and GE both have 'Abrasive' which is very normal but not able to load thru 'create Hierarchy' option after selecting 2 flds in IM.
IM throws a duplicate error , "Duplicate in Column-2: Abrasive"
Hope the example communicates properly.
Appreciate ur help/tips
-reo

Guys,
Found the way to do that.The steps to follow are
1) In partition have to select all mutilevel (for my case 3 levels) individual columns one by one and select all the flds brought to right pane to 'combine' them.
2)Select the combine field in partion, right click and select 'split partion' from context menu.
3)In map , map this partition field of source side to 'Name' fld of destination hierarchy table.
This works excellent
However I have a challenge to convert 220k hierarchy input record.The system is just hanging even if I have splitted the input files to 6/7 sections in MS access.
Any suggestion /tips appreciated.
-reo

Hierarchy Loads using Import Manager

Running on 7.1 SP05 using the SAP supplied Vendor Master repostory archive.
Attempting to load the Regions hierarchy table which contains three fields: Country (lookup flat), Region Code (text) and Region Name (text). When defining the map in Import Manager it will only allow me to select Region Name as the matching field. And, as a result, it will not load all of the data in my load file - it loads the first value of Region Name and skips the other records where Region Name is duplicated. This makes sense; however, I need to be able to select both Region Name and Country as my matching fields when defining the map. These two fields are the unique identifier for the load file and all the data would be loaded correctly if I was able to select Country as well. I have tried making Country both a unique field and a display field in Console, but to no avail.
Does anyone know how to get Country to appear in the "Mapped destination fields" so that I can match on both Region Name and Country?

Hi Reinhardt,
I think you can achieve it by setting country field also as Display field (DF) along with existing Region name (DF) in Regions Hierarchy Table of MDM console.
Regards,
Mandeep Saini

Selective hierarchy load

Similar Messages

Maybe you are looking for