Selective Mode Pubshing (See it but NOT Try it, etc.)

I am trying to publish player content for my partner organization. They would like the "SEE IT" and "PRINT IT" but not the other modes. When I publish, I always get ALL the player modes.
Looking at the topic properties, it appears as though you can check some rather than all modes. But when I publish, all modes are published regardless.
I tried to provide a link to only the "SEE IT" content but it required a player package. I tried this out on a machine and ran the installer for the player package. It still brought me to a page with all the other modes on there.
Surely there must be a way to selectively publish. Cannot find in any resolution in my UPK documentation.
es
Edited by: 922588 on Mar 21, 2012 2:59 PM

Hi es,
I managed to get my UPK 11 to only show "See It", "Try it" and "Print it". It seems like 'Try it" is hand-in-hand with "See it", so I could therefore not get rid of "Try it".
As you have done, ensure that "See It/Try it" is selected as the mode for EACH frame within the topic - this is changed in the "Show in" block under the Frame Properties.
Then, when you publish, you must change some options too. Get to the stage of the publishing wizard where you have the tick boxes available to you to choose what and how to deploy content. Select the "Player and LMS" option, and look at the properties on the right. Under Player Preferences, ensure that the default mode is "See It". On the same properties, further down, there is a section called "Print It" - ensure that the Text Mode "See It/Try It" is selected here.
Then, on the left again, choose the option that says "Standalone Topic Files" - preview the properties, and again, ensure that the Text Mode under "Print It" is set to "See It/Try It".
Go ahead and publish - you may get errors as I did, stating that there is no "Do It" mode etc. This is fine.
Preview the play.exe and then see if that is what you want?
Best I could come up with - hope it helps somewhat!
Regards,
Greig

Similar Messages

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

I have an update to my issue above, with a Semi-solution found. I brought my Macbook Air back to the Genus bar today and they were able to identify (using “Activity Monitor”) that when the particular iPhoto library was being launched through iPhoto both Photostream and iPhoto's CPU% usage was excessively high (between 100% - 200% each). She discovered that if we turn off Photostream in iCloud settings iPhoto then behaved fast and snappy and CPU% came back down to a healthier level. When we turned Photostream back on the problem continued. After an hour of trying to trouble shoot why Photostream was causing the issue they recommended I keep Photostream turned off until a future software update/fix comes out. The particular Genus I worked with was not familiar with this issue. I’m very happy to at least be able to use iPhoto again, but if anyone has ideas or theories on how the Photostream conflict can be fixed please share. Thanks.

HT2471 I have MacBPro and when I call wifes I Pad, she can see me but not hear me. What can I do to fix this?

I have MacBPro and when I call wife's I pad, she can see me but not hear me. Any fix?

HI,
I presume this is FaceTime you are using on the Mac ?
Make sure these ports are open in your router
http://support.apple.com/kb/HT4245
9:37 PM Wednesday; December 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT204380 When I contact someone with FaceTime, they can see me but not hear me. I can see and hear them. What am I doing wrong?

When I contact someone on FaceTime, they can see me but not hear me. I can see and hear them. No one has ever been able to hear me. What am I doing wrong?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

Selecting more than one calendar but not all?

is it possible on the iTouch iCal application to view more than one calendar but not all? I have one calendar that I would like to have available, but when I check for conflicts, that calendar doesn't matter (if it were included, every day would be a conflict).
I don't see any way to do this, but I am hoping someone has a workaround or other solution.
Charles

Let's say I have three calendars: Home, Business, and Daily Junk. The Daily Junk calendar serves as a type of to-do list (and yes, I know there's a separate todo list -- this is an example). I want to see a view that shows Home and Business at the same time, but not Daily Junk. I can view all -- which gets Daily Junk -- or I can view Home or Business, but not Home and Business but not Daily Junk.
Am I missing something obvious? When I select a specific calendar, I don't have an option to do more than one -- I get a specific calendar or all of them.
Thanks much

Can see folders but not files after a restore

Hi,
My friend had his internal HDD replaced. The tech performed a fresh install from a default image on the new HDD, and then copied the files from the dying HDD to the new install.
Now, when he navigates his user home directory he can see all his folders, but can't see his files within them. I'm thinking this is because there is different UserID on the files. Am I correct that Unix will allow you to see the directories (if the group is the same) but not see the files within them, because the UserID has changed?
I've had some people suggest the following commands to fix it via vark.com:
Suggestion 1:
sudo chown -R yourAccountName /path/to/the/folder
Suggestion 2:
If it really is the user ID (check by opening Terminal and typing
ls -laF
to see who the files belong to), then it's probably easier to just change the owner of the files, again in Terminal by typing
chown -R <shortusername> /Users/<shortusername>
There's GUI tools for that, too, but you'd have to Google.
Suggestion 3:
yeah, common problem. bring up the 'Get info' panel for each of the folder(s) with this problem, and use the Sharing & Permissions section at the bottom of the panel to re-set permissions to your new users/groups, then click on the 'gear' icon and click 'Apply to enclosed items...'
Do these look correct solutions based on the symptons? I've not been able to get hands on access to the computer yet, otherwise I'd use terminal.app and check out the permissions myself.
Cheers

Yeah, I'm not convinced the tech has done the job properly since when he logs in he can't see his files!
Given the tech knew my friend's password, I suspect that after he created a new install from the default image, he then added a new user with the same name / password as my friends original account.
This would almost definitely create a new UserID wouldn't it?

As a secretary I want to allow other people to see emails but not change anything. Is that possible?

i AM SECRETARY OF A CLUB, AND ALL THE COMMITTEE HAVE ACCESS TO THE EMAIL ACCOUNT. I WANT THEM TO BE ABLE TO SEE THE EMAILS BUT NOT DELETE OR CHANGE ANYTHING

Not possible.

Firefox is rendering a page in quirks mode on one machine, but not on a different machine.

I have two machines that are going to the same website. One machine renders the page correctly, the other enters quirks mode and nothing appears on the screen.
The machine that is not working is running OS X 10.6.4. The one that is working is running 10.4.11.
I tried deleting the preferences, and reinstalling Firefox.
This is a brand new install of the OS and was the first time we tried access this website.

The problem is due to a call to getVolumeInformation. It works on my desktop but not on a different machine which has different drives and partitions etc. I'm returning the file system type of the fixed drives, however on certain fixed drives it fails. At first I thought it was failing on logical drives but that does not seem to be the case.This is nonsense in terms of your original post.
Perhaps you meant to say that some of your native methods work and others dont? And the one and only way that they don't work is because you get the link error? If yes then I already told you what the reason is.
Conversely there is some other failure, which has nothing to do with a link error. And thus it is pointless to continue to discuss this unless you actually explain what is happening.

Can see drive, but not volume with AEBS

Perhaps an odd question: I've been using my airport extreme base station as an NAS drive with my Seagate FreeAgent 380Gb drive for some time now, but after moving and setting up a new network (same settings and whatnot, but different geographical location), I can no longer mount the volume through the finder. I can see the drive using the Airport Utility, but not the volume that I want to mount. The volume shows up fine when I plug directly to my computer.
Oh, and it's mounted NFS+ and Disk Utility doesn't see any problems that need repairs on it.
Does anybody have any insight into this issue? Anybody else had the same problem?

is this only while using the remote app on the iPhone? if you just use the regular appleTV remote can you click on an play streamed (i.e. unsynced) content?
I have all the latest updates and don't have this problem at all but i don't have an iPhone to use as remote...

Selectively enable push notifications calendar but not email?

Is there a way to only enable push notifications for my calendar (Google Calendar through iCal), but not my email (Gmail account in Mail.app)? I want the Mail.app to be setup for Gmail when I want to send email links from apps, etc., but I don't want constant push notifications (otherwise I'd just use the Gmail app). I turned off the Notifications for Mail.app, but the phone still vibrates when a new email comes in.

You're confusing at least 4 different things, - push email, push notifications, notifications and alerts,
"Push notifications" are what certain 3rd party apps use to remotely send info to you.
"Push Email": IMAP and Exchange accounts that automatically send mail to the phone.
"Notifications": Internal text type alerts when certain events occur such as receipt of mail (push or fetch)
"Alerts": Tones and/or vibrations when an event occurs
The best I can determine from your post is that you're getting unwanted vibrations when receiving push mail - no other notifications. If that's the case, in iOS 6 (coming 9/19);
Settings > Sounds > New Mail > Vibration > None

Select works in SQL Workshop, but not as an LOV

I want all venues to appear in my LOV
With their affiliated Performing Arts Center, if one exists.
I get the perfect results when I run it in SQL Workshop.
When I try to create the LOV, I'm told it's invalid, because it includes an in-line query and the first FROM clause must not belong in the in-line query.
Not quite sure what it means, but I'm sure I don't know how to fix it...
SELECT
v.VENUE_NAME, p.pac_name d,
v.VENUE_ID r
from pac p, VENUES v
where v.venue_pacid = p.pac_id(+)
thanks
Marion

I'm told it's invalid, because it includes an in-line query and the first FROM clause must not belong in the in-line query.Think that's just an example of why a query might be invalid, as this query clearly doesn't have that.
Jari's right, it has to only return 2 columns, so the venue and PAC values need merged somehow, like:
SELECT
         v.VENUE_NAME || nvl2(p.pac_name, ' (', null) || p.pac_name || nvl2(p.pac_name, ')', null) d,
         v.VENUE_ID r
from     pac p, VENUES v
where    v.venue_pacid = p.pac_id (+)

Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

Hi,
I have a problem similar to
this but with a different cause.
Our OAB config looks good from both Outlook 2007 and Outlook 2010. Both can see the GAL in non-cached mode but in cached mode only 2007 can see the GAL. In 2010 it's just not there. Even the same user can only see it in 2007.
Does anyone have any suggestions as to why this is?
Cheers,
Rob

Hi,
I have got the same issue, that I can't see updated OAB in outlook 2010.
Can you share the detailed path of the locations you have mentioned here:
In Office 2010, this happens but these values also exist in the [Service1] section and are blank:
OfflineAddressBookPath=
OfflineFolderPathAndFilename=
And how do we add locations to these paths?
Thank you in advance.

SQL Select Records in a range but Not in another range

Dear All
I would like to know the best method to do the following task.
There are records of meeting room usage
room                        start_time
Room A                2014-08-30 16:55:00.000
Room C                      2014-08-30 13:20:00.000
Room B                      2014-08-29 21:45:00.000
Room A                      2014-08-29 22:00:00.000
I would like to get the rooms used at a range (e.g. 2014-08-30) but cannot be used in another range (e.g. 2014-08-29 or before)
The result should be Room C only.
My apporach is as follows
SELECT room FROM RoomUsage
WHERE start_time >= '2014-08-30 00:00:00' AND start_time <= '2014-08-30 23:59:59'
AND room NOT IN (
SELECT room FROM RoomUsage
     WHERE start_time < '2014-08-30 00:00:00'
Is there any better and simple approach to achieve the same result?
Thank you
Best Regards
swivan

I tend to use EXCEPT or NOT EXISTS for this kind of thing as I find them more intuitive. I also tend
not to use Not In for JOINs due to its well-known problem with NULLs, ie if there is a NULL in the inner resultset the query short-circuits and you get no records. I therefore prefer to use In / Not In for
short lists eg Not In ( 'a', 'b', 'c' ).
See for yourself:
IF OBJECT_ID('tempdb..#roomUsage') IS NOT NULL DROP TABLE #roomUsage
CREATE TABLE #roomUsage ( room VARCHAR(20) NOT NULL, start_time DATETIME2 NOT NULL )
INSERT INTO #roomUsage
VALUES
( 'Room A', '2014-08-30 16:55:00.000' ),
( 'Room C', '2014-08-30 13:20:00.000' ),
( 'Room B', '2014-08-29 21:45:00.000' ),
( 'Room A', '2014-08-29 22:00:00.000' )
SELECT room
FROM #roomUsage
WHERE start_time >= '2014-08-30 00:00:00' AND start_time <= '2014-08-30 23:59:59'
EXCEPT
SELECT room
FROM #roomUsage
WHERE start_time < '2014-08-30 00:00:00'
SELECT room FROM #roomUsage
WHERE start_time >= '2014-08-30 00:00:00' AND start_time <= '2014-08-30 23:59:59'
AND room NOT IN (
SELECT room FROM #roomUsage
WHERE start_time < '2014-08-30 00:00:00'
-- Oops
SELECT room FROM #roomUsage
WHERE start_time >= '2014-08-30 00:00:00' AND start_time <= '2014-08-30 23:59:59'
AND room NOT IN (
SELECT room FROM #roomUsage
WHERE start_time < '2014-08-30 00:00:00'
UNION ALL
SELECT NULL

Analyzer 5 - How to select children in radio button but not parent?

In Analyzer 5.03, I would like to have a radio button selection box of the children of a parent. Since the option to select a subset is not available for selection controls, I am using "Also select children" which displays the parent upon page load, but then removes it when I refresh the page.What is this strange behavior all about and how can I just select the children?Any help is greatly appreciated. Thank you.-Scott

radio.setLayout("pageDirection");Also see:
HtmlSelectOneRadio API doc: http://java.sun.com/javaee/5/docs/api/javax/faces/component/html/HtmlSelectOneRadio.html
h:selectOneRadio TLD doc: http://java.sun.com/javaee/javaserverfaces/1.2/docs/tlddocs/h/selectOneRadio.html

Selective Mode Pubshing (See it but NOT Try it, etc.)

Similar Messages

Maybe you are looking for