Selective Remote Wipe mobile device by using SCCM2012 R2

Hi all. I've got SCCM2012 R2 installed and would like to test out the new Selective Remote Wipe feature (wipe company content only). I've created the Exchange Connector, running the connection to our Exchange server through a service account,
and this service account has been granted with the Exchange Organiziation Management and View-Only permission. In SCCM2012 R2 admin console, I can see the list of mobile device that connected to our Exchange server through ActiveSync. However,
when I try to do a Retire / Wipe action on the mobile device, I only able to select the option "Wipe the mobile device and retire it from Configuration Manager" (a FULL wipe of the device, which is not what I wanted). The option above, "Wipe
company content and retire the mobile device from Configuration Manager" is dimmed out, not configurable. Am I missing something here? Thank you.

Selective Wipe is only available when you integrate ConfigMgr with Windows Intune. The Exchange Connector is not enough.
http://www.gerryhampsoncm.blogspot.ie/2014/02/mdm-in-sccm-2012-r2-device-ownership.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

Is there a way to select a specific playback device while using itunes 11 on Windows 7?

Is there a way to select a specific playback device while using itunes 11 on Windows 7? I was trying to select a device, is there such an option in itunes as there is in VLC player and Windows Media Player. If not, any idea when this feature will becoem available? Thanks!

iTunes supports multiple Airplay devices that can be selected. If the device does not support Airplay then the manufacture of the device would need to support it for iTunes.

Iphone 4s stolen. Selected remote wipe via Icloud. Received email hours later saying it was happening. Here's the problem: according to Verizon, the phone is still using data. How is this possible? Wouldn't the user have to register the device with Apple?

So, if a remote wipe occurred as the email stated, how did the person with the phone immediately go back to using the data on the phone. Wouldn't the person have to register the Iphone through Itunes? I got the email saying the erase was happening at 11:10. Looking at my cellular data usage, the phone began using data about that time after about a 12 hour break. So it seems like Find my Iphone quickly picked up the phone. But then the phone continued using data for about 3 more hours. How could the person be using the phone if it had just been wiped?

I understand that iCloud's erase function is totally distinct from Verizon's cellular service (i.e. the phone could be wiped and Verizon would never know). It's been a while since I've activated an Iphone through Itunes, but when you activate the phone don't you have to register it? If the iPhone was wiped at 11:10, how could it be using data at 11:15 and consistently for the next three hours. How long does the Itunes registration process take?

Is it possible to remote wipe a device when it's not fetching mail?

We're looking at deploying some shared iPads. We don't want people to be tempted to install their own email accounts on them, so we were going to try to lock that out. However, I've found that without an associated AND ACTIVE email account we can't do a remote wipe. It'd be OK to have an email account associated if it wasn't pulling in email, because then tapping on the email icon wouldn't be so tempting, but if we have email disabled the device doesn't seem to pull in the kill message. We're using Lotus Traveler as our mobile device management server, but I think other solutions are the same -- they depend on the association with a mail account to do remote wipe.
Is there some other tool that can trigger a remote wipe that's NOT email based?
Thanks.

I familiar with Exchange and as I understand, it does require an email connection. One thing we tried out in exchange wsa connecting the device to an account that had mail forwarding turned off...that way you had the remote wipe capability, but no mail would be delivered.

After syncing with iTunes, Apple Mobile Device Support uses 83-99% of CPU

After syncing with iTunes 10.4.0.80, everything becomes very slow on my XP Home PC with 2G RAM. Apple Mobile Device is reported as using 83-99% of the CPU cycles. Shutting down and restarting Apple Mobile Device solves the problem and reduces CPU cycles to 0%. (I have written a small batch program to stop and restart the Apple Mobile Device to achieve this.) Does anyone have any thoughts about why the Apple Mobile Device process won't release when the sync is finished?

i deleted itunes and mobile support and now when i reinstall itunes the mobile support does not come back with it as when it tries to install that it just says rolling back after it is almost done
The AMDS install roll-back (on XP) can be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we can get past this ... but I'm afraid it's a bit of a performance.
First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
Make sure "Show hidden files and folders" is selected.
Make sure "Hide extensions for known filetypes" is unchecked.
Make sure "Hide protected operating system files (Recommended)" is unchecked.
Click OK.
Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
Open the "Windows" folder.
Open the "system32" folder.
Open the "DRVSTORE" folder.
In there look to see if you have either of the following two folders:
netaapl_(LongStringOfNumbers)
usbaapl_(LongStringOfNumbers)
If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
Now go back into the "system32" directory.
Open the "Drivers" directory.
Look for either of the following two files:
netaapl.sys
usbaapl.sys
If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
Now restart the PC. Uninstall iTunes again, and then try reinstalling it again. Does Apple Mobile Device Support install this time?

How to set Css in mobile device + OS using Flex 4.5 Mobile

Hi,
how to set Css for mobile device + OS
is it possible
@media (device : "IPAD") and (application-dpi: 160) and (os-platform: "IOS") { }
Can anyone help to me.

BorderContainer wont resize if the fixed width is specified, if u want to give some minimum width you can use minWidth . Give Width = "100%", now it will get Resizing capabilities

SCCM 2012R2 with Intune - Remote Wipe iOS devices

Hi,
I have questions regarding Remote Wipe in SCCM 2012 R2 with Intune manage iOS-devices.
How often do the iOS device "talk" to SCCM/Intune environment?
Is that "value" possible to change? (client settings, Intune-admin console)
I've published applications in SCCM and installed these via "Company Portal", but when I manage to run Remote Wipe it wont delete the data installed by SCCM/Intune?
Has anyone tested this functionality?
Regards
Daniel

Microsoft has released and patch that effectively shortens the remote wipe task to seconds. I am currently testing in my environment. Please note you need to be running 2012 R2 CU3 for the update to be applicable
http://windowsitpro.com/configuration-manager/new-configmgr-hotfix-adds-immediate-client-notifications-speeds-remote-wipe-se

I have windows 7I have downloaded most updates and use no mobile devices just use itunes my pc. what programs can I eleminate as I'm running out of memory?

What itunes/sony programs can I elimnate from my pc if I only use it on my pc? I have no mobile devices and afraid Im have sony, safari browser and other programs on my computer. I routinely down loaded all updates and afraid I have many uneeded programs and also have problems of running out of memory, can somebody help

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Apple mobile device exe used excessive CPU

I am running iTunes on Windows 7 32 bits and as sson as I open Itunes, Apple Mobile Device exe. will start to use up to 50% of my CPU. Even when I have closed iTunes this contnues. Is there a fif for this since it will of course mean that all other processes will be slowed down and that the heat from the CPU finally will lower the life of my lap op.

You can try looking at some of the previous posts on the right under the heading "More Like This" with your same problem.

Windows 8.1 mobile device management using integrated environment of SCCM 2012 R2 and Windows intune

Can we avoid the dependency on the Symantec certificate for enabling windows phone enrollment under Administration->Cloud services -> Windows InTune subscriptions - Windows Phones. My environment will have only windows 8.1 phones.
Regards
Leela

See http://status.manage.microsoft.com/StatusPage/ServiceDashboard.
Engineers are investigating a service issue impacting access to portal via mobile devices.
(Started on 12/30/2014 8:00:00 AM UTC)
1/8/2015 11:42:49 PM (UTC)
Current Status: Engineers are continuing to troubleshoot potential issues related to Active Directory Federation Services (ADFS). Engineers have gathered additional traces and logging data for deeper analysis. User Experience: Affected users with Windows Phone,
iOS, or Android devices are unable to access their company portal and receive repeated prompts to enter credentials. If incorrect credentials are entered, users will receive an error stating that they have entered a bad password. Customer Impact: Engineers
have received reports that some customers are experiencing this issue. A subset of users are affected by this event. Other users remain unaffected. Incident Start Time: Tuesday, December 30, 2014, at 8:00 AM UTC Next Update by: Tuesday, January 13, 2015, at
12:00 AM UTC
Torsten Meringer | http://www.mssccmfaq.de

Lost Apple iPhone - a security procedure to remotely 'wipe' the device?

Hello,
I have a brand new iPhone and would like to know what I would have to do if I ever lost permanent possession of it. Is there a procedure such as logging into the .me (.mac) account and selecting my personal passworded and double protected member's top secret area (lol), that I could report my device missing and would then be able to 'wipe' the iPhone clean of all contents before another user could gain access and control it AND possibly me via all my other macs.
Basically, can someone gain control of all my macs if I were to lose my iPhone? Is this possible, and if so, please could you let me know where to find it on the Apple website so I can be prepared to follow the procedure and take control of the lost iPhone from anywhere, wiping it clean of all content and disabling the device forever (this device will explode in 10 seconds... hey don't joke, that may happen one day!), can I gain access remotely to my iPhone and disable it... from my macs or someone else's mac/iphone/blackberry et al, even if someone else DOES gain control of it. Is there a backdoor that I could gain access to while someone else is using my iPhone and shut it down there and then. How quickly could this be done? Securely.
Many thanks,
GC

Remote wipe is available from the exchange server for iPhones deployed in the enterprise environment.
http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf - page 7
However, it you have the 2.1 iPhone upgrade and put a passcode lock on the phone, you can have the option to wipe data after ten failed passcode attempts.
http://www.apple.com/iphone/softwareupdate/

How to remote wipe when device is offline

how do I reset passcode or wipe device?

If it is offline, you cannot do it. You can select the option and it will put it in a pending status for 24 hours, so that if the device comes online during that time, the action will take place.
Cheers,
GB

Upload image from mobile device by using J2ME

Dear all.
I would like to upload the png image to the server.. but I don't know how to do. Is it possible to do so? what should I do?? anyone can help me????
thanks all experts..~~!

From Example using POST with HttpConnection in javax.microedition.io.HttpConnection:
    void postViaHttpConnection(String url) throws IOException {
        HttpConnection c = null;
        InputStream is = null;
        OutputStream os = null;
        int rc;
        try {
            c = (HttpConnection)Connector.open(url);
            // Set the request method and headers
            c.setRequestMethod(HttpConnection.POST);
            c.setRequestProperty("If-Modified-Since",
                "29 Oct 1999 19:43:31 GMT");
            c.setRequestProperty("User-Agent",
                "Profile/MIDP-2.0 Configuration/CLDC-1.0");
            c.setRequestProperty("Content-Language", "en-US");
            // Getting the output stream may flush the headers
            os = c.openOutputStream();
            os.write("LIST games\n".getBytes()); // Replace with PNG bytes
            os.flush();           // Optional, getResponseCode will flush
            // Getting the response code will open the connection,
            // send the request, and read the HTTP response headers.
            // The headers are stored until requested.
            rc = c.getResponseCode();
            if (rc != HttpConnection.HTTP_OK) {
                throw new IOException("HTTP response code: " + rc);
            is = c.openInputStream();
            // Get the ContentType
            String type = c.getType();
            processType(type);
            // Get the length and process the data
            int len = (int)c.getLength();
            if (len > 0) {
                 int actual = 0;
                 int bytesread = 0 ;
                 byte[] data = new byte[len];
                 while ((bytesread != len) && (actual != -1)) {
                    actual = is.read(data, bytesread, len - bytesread);
                    bytesread += actual;
                process(data);
            } else {
                int ch;
                while ((ch = is.read()) != -1) {
                    process((byte)ch);
        } catch (ClassCastException e) {
            throw new IllegalArgumentException("Not an HTTP URL");
        } finally {
            if (is != null)
                is.close();
            if (os != null)
                os.close();
            if (c != null)
                c.close();
    }

Wipe a mobile device before disabling a user

Has anyone tried to tackle the issue of remote wiping ActiveSync devices before disabling a user account with FIM?
We have an issue when we terminate a user and disable the account and we reset the password for good measure, the phone will not receive a remote wipe command since that user on that phone will no longer authenticate.
Curious if anyone has thought of a work around or some solution to wipe mobile devices. Short of an MDM that will do this via an installed app on the phone.
Kirk

Perhaps you can either use the PoSh MA or the PoSh workflow task to send the
Clear-MobileDevice command to Exchange.
Forefront Identity Manager Connector for PowerShell
FIM PowerShell Workflow Activity
Mike Crowley | MVP
My Blog --
Planet Technologies

Selective Remote Wipe mobile device by using SCCM2012 R2

Similar Messages

Maybe you are looking for