SelectOneChoice ID and Name

Hi,
I set the value for my selectOnechoice through property inspector to s2. When I run the code I get "_id4:s2".
<select id="_id4:s2" name="_id4:s2" ....
Is there any way I can get rid of _id4: in front of s2?  I am planning on using JavaScript process the selected value but not sure where this value is coming from?  Any thoughts out there?
thanks

Okay, I see that if you name the form say, ddform, the name of dropdown list will becaome "ddform:s1". Is there any way to turn this off so that when I call it s1, it stays s1. Otherwise, all my JavaScript must take into account that form name into account.... Any thoughts?

Similar Messages

  • Adding link to the photo and Name in the outlook contact card -Enterprise wide

    How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
    I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
    Appreciate if you can provide details on how this is done. The url will look like this:
    https://www.produrl.com/userid={userid}
    How can I dynamically add respective userid in the link?Appreciate your response on this.

    So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
    beyond what is listed here:
    http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Importing CD to Artist folder\Album folder\file with track number and name:

    I have a problem then importing my cd’s to my harddisk using iTunes.
    On my previous pc I got what I want, Artist folder, Album folder and file with track number and name:
    e.g.
    D:\My Music\B.B. King\Blues On The Bayou\01 Blues Boys Tune.mp3
    D:\My Music\B.B. King\Blues On The Bayou\02 Bad Case Of Love.mp3
    D:\My Music\B.B. King\Blues On The Bayou\03 I'll Survive.mp3
    But now I get:
    D:\My Music\Compilations\Blues On The Bayou\01 Blues Boys Tune.mp3
    D:\My Music\ Compilations \02 Bad Case Of Love.mp3
    D:\My Music\ Compilations \03 I'll Survive.mp3
    In iTunes my settings are Edit -> Preferences -> Advanced: iTunes Music folder: D:\My Music and checkmark in both: “Keep iTunes Music folder organized” and “Copy files to iTunes Music folder when adding to library”.
    My version of iTunes is 8.0.1.11
    Thanks in advance
    Peter

    It will depend on the album. Gracenote considers anthologies, a collection of tracks by the same artist taken from different albums, as a compilation. In iTunes the compliation setting should really only be applied to a collection of tracks by different artists.
    tt2

  • Project Server 2010 - Modification date and name of the person who made the last change in the project

    Hello everybody
    I'm with a doubt.
    I got in the business
    environment Project Server 2010 and
    would like to get the publication date,modification
    date and name
    of the person who made
    the last change in
    the project. It is possible
    to doby the native
    resources or is
    there any query in
    SQL Server to perform a
    query of this information.
    Thank you.
    Obrigado por contactar o fórum Microsoft Technet!

    Hi Hezequias,
    You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
    get the data based on the projectUID. 
    The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
    For the "last modified by", I think it is not stored in any place.
    But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
    date and username automatically into a custom enterprise field.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Path and Name field in SPD 2010 Workflow for creating Doc Sets

    Hi Guys,
    Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
    a new item is added to the current library.
    Create Item in CaseFileLibrary (Output to Variable: CaseFile)
    When running the workflow, I keep getting the following error:
    "The workflow could not create the list item because the file name is either missing or invalid. "
    It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
    (as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
    If anyone has any suggestions, I would be truely greatful.
    Luke

    Hi Luke,
    This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
    that is too long and exceeds the allowable number of characters.
    More information, please refer to :
    Common error messages in SharePoint workflow development
    For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
    compare the result.
    In addition, please use another name for the name, compare the result.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • File Path and Name field does not display correct path

    We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field  inside our report and it displays the correct path when viewed inside Crystal reports:
    C:\Program Files\reports\Chart.rpt
    When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
    C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
    How can this be corrected?
    Thanks in advance for any assistance.

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • IMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

    iMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

    I am using my own Apple ID.  (My father doesn't even have one).  I seem to recall having to select a contact or something to assign to my iMessage app when I used it the first time on my iPad.  I checked the settings and it is set to my apple ID and correct email address.  Any other ideas?

  • Need to extract faces and names from a multi-portrait high school year book scanned page

         I am responsible for generating individual high school student portraits (5" x 7") from scanned 600 dpi pages of portraits from my high school beacon (year book). There are 16 - 20 black and white portraits per page and there are between 800 and 850 students in my graduating class.
         The end product is taking an estimated 850 portraits from multi- portrait pages and convert them into individual 5" x 7" B&W photos.
         Attached is one of the pages of portraits to experiment with. Other than selecting each individual portrait and pasting it into a new image from the clipboard, I don't know of a faster way to do it. This will nearly take forever.
           Might there be a way to create a grid of selections template that applies to each page and extracts the portraits and names separating them into individual images?
    I couldn't download a sample for some reason. The portraits are arranged 4 wide and 5 down like below table but without the header.  The names are below the faces. If one of you has an idea, I could email the full size image to you.
    Header 1
    Header 2
    Header 3
    Header 4

    Nothing shows up.
    1. Go to www.pixentral.com
    2. Put your cursor in the blank provided for the upload (where it says your image)
    3. Click on the Browse button
    4. When the "Choose File" box pops up, navigate to where your photo is stored, click on your photo file, then at the bottom of the box, click the Open button
    5. It will come back to Pixentral with the path to your photo shown in the blank
    6. Now on the Pixentral screen, click on the Send button
    7. Once your photo is loaded (you'll see it on the Pixentral screen) scroll down to the bottom of the photo where you'll see two lines of text, one that says HTML and one that says Forum
    8. You need to copy all of the text in the box after "Forum"
    9. An easy way to select it is to triple click on the text OR drag your mouse all the way from the first character to the last character of the text
    10. Once it is selected, press Ctrl-C to copy it
    11. Then go to your message on the forum here and paste your link by pressing Ctrl-V

  • Get (variable) file path and name in a text element

    How do you get the (variable) file path and name in a text element (label) in LCD? If you save the PDF and afterwards relocate it, it should update the values. Is that actually possible?

    Does anyone have any advice on this issue?
    Thanks in advance,
    Zack H.

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • File Path and Name

    Hi everyone,
    I am scheduling reports in Crystal Reports Server.  My reports contain the "Special Field" File Path and Name.  However, when the report is sent out via CRS, it prints a different location of where the report actually resides.  In CRS, how can I make the file path and name field print the actual location of the report file rather than a rogue location?
    Thanks in advance,
    Zack H.

    Does anyone have any advice on this issue?
    Thanks in advance,
    Zack H.

  • Display as Key and Name Not working properly after upgrade to Bi7.0

    Hi Bw Guru's
    Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
    after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
    1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
       Right click on workbook -> Currency translation-> Database currency .
        but after upgrade to BI7.0 this is not working ..
    2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
    I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
    Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
    Please suggest me..
    Thanks in advance
    Shu Moh.

    Dear Harita
    The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
    Shu Moh

  • PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.

    Hi Experts,
    I am trying to  build a PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.
    Can anyone advise on this please.
    Regards

    Get-SPSolution|Select Name,Scope,LastOperationResult,LastOperationEndTime|Export-CSV "SPInstalledSolutions.csv" -NoTypeInformation
    SPSolution properties
    Get-SPSolution
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • FTP adapter should take file path and name at runtime..

    Hello All,
    I have requirement of getting the file from remote machine into local machine..thinking FTP adapter should help me to do this..
    I dont need to poll the remote directory. rather I will pass the exact path and name of the file to be fetched during runtime as an input to the bpel process.
    How to configure the FTP Adapter to receive the file path runtiime and gets it to local machine.
    Is it doable using ftp adapter..?
    Thanks
    Saikrishna

    Hello Anne,
    Thank you for the help.
    I am not able to call a adapter partner link using invoke activity..I am facing variable type conflicts.
    modified the
    OutboundFtpHeaderType wsdl to take file name and directory as:
    <complexType>
    <sequence>
    <element name="*fileName*" type="string"/>
    <element name="*directory*" type="string"/>
    </sequence>
    </complexType>
    Using Adapters tab of Invoke activity created a variable:
    <variable name="outputVariable"
    messageType="client:FTPadapterResponseMessage"/>
    <variable name="*filePath*" messageType="ns2:OutboundHeader_msg"/>
    Using Assign Activity, assigned the input varibales to the ftp outboundHeader variable:
    <assign name="Assign_1">
    <copy>
    <from variable="inputVariable" part="payload"
    query="/client:FTPadapterProcessRequest/client:*directory*"/>
    <to variable="*filePath*" part="outboundHeader"
    query="/ns2:OutboundFTPHeaderType/ns2:directory"/>
    </copy>
    <copy>
    <from variable="inputVariable" part="payload"
    query="/client:FTPadapterProcessRequest/client:*filename*"/>
    <to variable="*filePath*" part="outboundHeader"
    query="/ns2:OutboundFTPHeaderType/ns2:fileName"/>
    </copy>
    </assign>
    Used the created variable in the invoke activity as a input paramater to the partner link:
    <invoke name="Invoke_1" partnerLink="ftpAdapterTest"
    portType="ns1:SynchRead_ptt" operation="SynchRead"
    inputVariable="*filePath*" bpelx:inputHeaderVariable="filePath"/>
    <reply name="replyOutput" partnerLink="client" portType="client:FTPadapter"
    operation="process" variable="outputVariable"/>
    I am getting an error in invoke activity:
    Variable type does not match the input type.
    Thanks
    Saikrishna

  • Split PDF, name odd pages and name even pages in sequence

    I need help creating a script to ask the user for a PDF file then do the following:
    -Extract even pages and rename name with "_Front#" ending where "#" is a number sequence starting with 1.
    → ex: the PDF I choose when prompted is "anatomyBook". The extracted even pages would be:
         - anatomyBook_Front1,  anatomyBook_Front2, anatomyBook_Front3,...
    -Extract odd pages and name them similarly except replace "Front" with "Back" 
    Thanks for the help!

    Ok, I have solved some issues I found with the previous script and Automator configuration.
    The Filter Finder Items action apparently uses kMDItemKind to determine the file type, and if you choose a PDF file without an extension, this action will not pass the file to the Bash script. Result: 0.
    The mdls command, for the same reason will always fail to get a page count when it encounters a extensionless PDF file.
    Remove the entire mdls/egrep command sequence from the script.
    Wrote a shell function that runs Python, imports the CoreGraphics module, and returns the page count for PDF files with/out extensions. The function takes as its argument, the input PDF filename, which it passes into Python as a command-line argument ($1). It returns a page count.
    Replace entire Bash script in Automator with the following code.
    New Bash Script
    #!/bin/bash
    # Requirement: Install Skim PDF reader
    # Location: http://skim-app.sourceforge.net
    # Usage: progname.sh sample.pdf
    # Author: VikingOSX, August 2014, Apple Support Community
    function PDFpagecnt () {
    /usr/bin/python -c \
    "import sys
    from CoreGraphics import *
    pdfdoc = sys.argv[1]
    provider = CGDataProviderCreateWithFilename(pdfdoc)
    pdf = CGPDFDocumentCreateWithProvider(provider)
    print('{}'.format(pdf.getNumberOfPages()))" "${1}"
    function ASDialog () {
    `osascript <<-AppleScript
        set pdfFile to "${1}"
        set evens to "${2}"
        set odds to "${3}"
        set msg to ""
        set msg to msg & "PDF Processed: " & pdfFile & return
        set msg to msg & "Front Pages: " & tab & evens & return
        set msg to msg & "Back Pages: " & tab & odds
        tell application "System Events"
            display dialog msg with title "Processing Complete" giving up after 20
        end tell
        return quit
    AppleScript`
    skimPDF="/Applications/Skim.app/Contents/SharedSupport/skimpdf"
    pdfFile="$@"
    basename="${pdfFile%.*}"
    even=1
    odd=1
    pagecnt=$(PDFpagecnt "${pdfFile}")
    for mypdf in "$@"
    do
        for page in $(seq 1 $pagecnt)
        do
            if [[ $((page % 2)) == 0 ]]; then
                #even extractions
                `${skimPDF} extract "${pdfFile}" "${basename}""_Front"$((even)) -page ${page}`
                ((++even))
            else
                #odd extractions
                `${skimPDF} extract "${pdfFile}" "${basename}""_Back"$((odd)) -page ${page}`
                ((++odd))
            fi
        done
    done
    ASDialog "${pdfFile}" $((--even)) $((--odd))
    exit 0

Maybe you are looking for