SelectOneChoice not updating current CollectionModel
Hello,
I've spent the morning looking around for a solution to this behavior, but haven't found anything. I have 2 View Objects that both reference the same Entity object. THe first View Object is used for a Query and the second for Update/Insert. When I am using inputText for the Update/Insert and return to the Search page the CollectionModel is updated to reflect the new value.
Now, to help with usability I've replaced the inputText with Dyanmic selection lists wherever possible. The Base DataSource is the same as the inputText but when the Update/Insert is performed the CollectionModel does not reflect the new value. The query has to be re-executed for the values to update(but only for fields that are altered with selection lists, if I change an inputText is is refelcted in the current model).
Any help would be appreciated. I can just re-execute the query, but that's another round trip and is probably a poor solution. Thanks.
GPS works great even without AGPS, I even get as much as 7 satellites when I look at satellite status. However, it can range from instantaneous to more than 20min if you are not in your last location when you turned off the signal. AGPS can shorten that by much.
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Similar Messages
-
Presenter Display does not update current slide or run timer ...
Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!
Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio. -
Can not update MS-Acess 2000 db; currently locked
Running CFMX7, IIS6 on Win2k3. Using <unfortunately>
multiple Ms-Access 2000 mdbs. One application in particular is
erroring out constantly. I have "maintain connections" unchecked.
Line 86 is the location of the update query. The update query DOES
NOT use CFUPDATE...it uses CFQUERY with update statement inside.
"Error","jrpp-135","01/29/08","14:02:50",,"Error Executing
Database Query.[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Could not update;
currently locked by user 'admin' on machine 'mymachinename'. The
specific sequence of files included or processed is:
D:\Websites\thiswebsite\wwwroot\WebApps\subfolder\subfolder2\results.cfm,
line: 86 "I did eventually get it to work. The most important piece was
changing the CF datasource type from MS-Acess to ODBC-Socket.
Making this change was the single biggest improvement I could
have made. It must be because even though the CF Datasource type
says MS-Access, it's actually using a JDBC-ODBC bridge, whereas the
ODBC-Socket is using the "old" or "previous" method of using ODBC
directly. So you need to make sure you have an existing ODBC entry
in the windows odbc administrator (odbcad32.exe).
Best Wishes
-Stephen -
HT1386 iphone 4S will not update due to error 3194, need help
went to update phone to 7 and get a 3194 error and it will not update, currently stuck with usb icon and itunes icon on main screen
http://support.apple.com/kb/TS3694#communication
-
Hi. My itunes library is in current 10.5.2 but my old ipod touch 4th or 3rd gen is not updating at all its still in current 4.2 and there is some apps i cant download that requires a 4.3 update but in my itunes it wont. Please help!
Are you sure you have a 4g/3g iPod? If you don't have a camera, it's definitely not 4G. If it has no camera and is 8 or 16 Gb it is a 2G and can't go beyond 4.2.1.
-
When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software. Is there a bug in the iPod program?
If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
I have an iPod 2nd gen . I have been trying to get an update to the software, but it will not update. Current version is 4.2.1 Trying to update it so I can use facebook on it, but with this version facebook will not work. Can someone help with this please.
Ipod touch 2 g does not go above ios 4.2.1 and the facebook update needs 4.3 , so there is no way to update the app.
-
I have an iPod Touch 4th Generation and have not updated the software since I purchased it. When I first purchased the iPod Touch, I synced it with an old computer and an older version of iTunes. I no longer have access to the old computer and no access to the older music I downloaded onto the old computer. If I update the software for my iPod, will I lose all of my music that is currently on the iPod?
iOS 6.1.3 Software Update
iOS: How to update your iPhone, iPad, or iPod touch
Since your updating from iOS 4 to iOS 6, you will most likely lose your songs, but if songs were purchased from iTunes, you can try this:
Downloading past purchases from App Store, iBookstore, and iTunes Store
You can redownload from iTunes on your iTouch, if running iOS 5 or better. -
Current Status report not updating
Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong. Usually I can get the "Current Status" back to being accure by going to File/Refresh. In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot. Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes. If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly. This is with the 3.5.1 ARD Admin software. Any Ideas?A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John -
My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
My contact list does not update to its current state after I sync it to itunes or back it up to icloud I did a documents and data reset and the contact list still didnt change.. How do I fix this?
Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing. -
Unable to connect to companies in current server as algorithm is not update
Hi Experts,
I have installed SBO 881 PL04 (Installation setup) on Laptop on SQL server 2008 Express.
When I load the SAP B1 Client first time, it ask me to update the password.
When I changed the initial password, now it shows following error
Error : "Unable to connect to companies in current server as algorithm is not updated, run the common upgrade to update security algorithm"
Anybody has idea how to resolved it ?
Thanking in advance,
Samir GandhiHi Samir.....
Try upgrading Common upgrade once again.
This should help you to resolve your issue.
If you still getting same problem then if you have SAP installed in other PC and it is working proper then take SBO Common DB backup restore in your Laptop and then run common upgrade for the same.......
Hope this will solve your issue.....
Regards,
Rahul -
Dear,
I've had problems with the installation of version 9.0 PL04 (base) when trying to enter the base DemoUS, this system message I get: Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm.
Please someone has an idea how to fix (attached image of the message).Try this:
1. Check if the SBO-Common database exist. If you cannot find SBO-Common database you must re-install SBO system on the server.
2. If the SBO-Common database exists, then SAP Business One application version is higher than the SBO-Common database version. Perform version upgrade.
Regards,
JC. -
[svn:osmf:] 16553: Only update current time if not buffering.
Revision: 16553
Revision: 16553
Author: [email protected]
Date: 2010-06-14 11:31:37 -0700 (Mon, 14 Jun 2010)
Log Message:
Only update current time if not buffering. Addresses FM-912.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-912
Modified Paths:
osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/view/MainWindow.asclemensg wrote:
But the majority is still very old.
The bash version used in Mavericks is 6 years old.
That is a completely different issue. Bash, and a few other key pieces of open source software, switched to the GPLv3 license sometime in 2007. That license was designed specifically to keep Apple from using the software.
The version of bash on Mavericks is all that you will ever, ever get unless you build your own. I suggest trying out zsh which is under no such licensing contraints. The lastest version of zsh is included in Mavericks.
Do you think it helps to create a feature request to update OpenSSL, etc. at radar.apple.com ? (I am thinking about Mac OS X 10.10)
That would be a good idea. While I understand Apple's approach, it isn't great from a marketing perspective. Apple really does need to switch to the latest OpenSSL, even if only for appearance's sake.
Maybe you are looking for
-
Itunes Library error message on Powerbook G4
I have never had this error message pop up. Today I tried to copy some songs from my powerbook to my other mac for a video I was doing, the CD got stuck (doesn't even show up on screen) and I can't eject it AND now my itunes doesn't work saying somet
-
EmailRecieved Event handler for incoming email in Sharepoint 2013
Hi, I am developing custom event handler to enable incoming email for custom document library. i have couple of questions. 1. Once i attached the event handler, i could see incoming email settings for the custom document library, but it displays onl
-
Authorised dealer in my area says only models with ae is original others not is it correct
Can apple return non approved products ? Will I got I pad and I didn't know that there is some products in Saudi Arabia are not original apple products and I just read that only I pad with products number ends with AE only original so what they call
-
anybody know wy my screen is all white ?
-
Sales Analysis Comparison 9.0 PL10
Please advise how to create this query properly by to/from (period)dates? Having a problem, for some reason, adding units and %s. Stores(a property in BP) Total Units Total Sales Total Units LY(same period) Total Sales LY(same period)