Self Assigned IP Address with Airport Extreme

I just changed my router from an Asus to AIrport Extreme.   The Airport Extreme is connected to an ATT DSL modem. I know the modem works because I can connect to the internet when I connect it directly to my IMac. However, when I try to access the internet through the airport extreme it connects temporarily and then loses the connection. It tells me that I have a self assigned IP address and cannot connect to the network. This is the case through both Ethernet and WiFi. It is also the case when I try it with other devices (e.g. IPad, MacBook).
I know there are lots and lots of threads in this forum (and others) on this topic. I have been pouring over them for days and trying everything I could find including but not limited to--
Rebooting/power cycling
Keychain clearing and repairing
Renewing DHCP lease
Turning off firewall and virus barrier
deleting and recreating network
The modem is set up based on the ATT instructions for when it is to be connected to a non ATT router, thus it is in Bridge mode and the Airport Express is set to use PPPoE.   OS and all firmware is up to date.
There is another issue which may or may not be related. It is also an issue for which there are many existing threads (but apparently no definitive solution). My Imac keeps giving me a message that the name of my computer is already in use and has been changed to.....
http://https://discussions.apple.com/thread/4207056?start=0&tstart=0
I have tried several suggested solutions (e.g. energy savings pref, using only wifi or only ethernet to connect). So far no luck.
Both of these issues seem to have started when I switched routers.
Anyone know if the two issues are related? And whether there is a solution? Seems like both issues have been around a long time.......

Was using the wrong password option in UIXperts driver. Kept thinking it was a different protection mechanism than it was. Once the password was set, all was well. Referred back to the IOXperts installation guide (RTFM) for a clue.

Similar Messages

Moving to new address with airport extreme

Last year I moved across state. Yesterday I received an iPod touch. When I checked my location using the maps app the iPod touch told me that I was physically at the site of the home we moved away from 400 miles away. I suppose what is happening is that I have not put my new address in the airport extreme base station, but I'm not sure. Would you agree, and if so, how do I update that address in the airport extreme. I began to run the Airport setup utility and it asked if I wanted to create a new network - I actually didn't - I just wanted to put in a new address. How should I proceed? Of course, I may be totally off base with my solution. Thanks in advance for your help.

iPod Touch does access a database that helps it determine its location on the basis of known locations of WiFi access points it is connected to. For this scheme to work, the iPod touch needs to be in contact with a WiFi access point in its database - which are usually commercially run access points in urban areas.
As for your own Base Station - it won't be of much use in helping your iPod touch know where it is. WiFi access points like yours won't be in the database, and no - there is no such thing as an "address configuration" option on an Airport Base Station, so you can stop looking for it.

Self-assigned IP address for AirPort

If you're having this problem, go into Security and allow all incoming connections. Then turn airport off then back on. This should fix your problem. You can go back to your original setting if you choose. Let me know if this works for everyone.

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

Airport extreme 4th generation - self-assigned IP address

2 Airport extreme 4th generation with latest firmware. extented network in bridge mode.
After switching providers, I reset both my airports and set them up new accordingto manual.
Only some devices (less than 50!) at times can't get an IP address.
Error msg: Airport has a self-assigned IP address .......... and will not be able to connect to the internet.
My new provider told me it is an internal probem. Quote: This is an internal issue between your devices and your internal routers. we only gives an address to your router and it is your router that gives your devices an address.
My question is, which part of the manual settings in Airport Utility affect the distribution of internal IP addresses?
or how to change my set-up to avoid the problem I'm experiencing?
thanks a lot.

When in brigde mode your provider has to supply at least one IP address for each devices you want to connect.
Alt. turn bridge mode off in Airport Utilities and let your Base station distribute IP addresses. For that you have to enter two DNS addresses.
HTH.

Airport Extreme self assigning IP address

Please help me!!
I'm having sudden problems with my connection via the Airport extreme. The Icon in the top bar shows that the MBP is connected 2 the specified network, however, when I try to browse with Safari or Firefox, I get a message saying I'm not connected to the internet. This has happened while trying to connect to 2 different networks.
I have noticed that the Airport is self assigning an IP address. I'm not an expert, but I thought the IP was assigned by the ISP.
I have read a few other posts on here and followed the advice posted.
http://discussions.apple.com/thread.jspa?threadID=2365709&tstart=45
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
One piece of advice has offered me a temporary fix. I placed the 'System Configuration' folder on my desktop and restarted the MBP. This allows me about 24hrs grace, however if I try to connect to a different network, I have the same problem crop up.
The mac is about 18 months old and has worked like a dream up until a couple of days ago!
If anyone can shed some light on this, I would be most grateful!
Thanks in advance.

The message about a self assigned IP address is a fancy way of saying that your Internet connection is not working correctly.
When something like this happens, the first troubleshooting step that you should take as a complete network power cycle as follows:
Power off everything on your network....all devices....order is not important
Wait a moment or two
Start the modem first and let run run for a moment by itself
Then start the next device connected to the modem the same way
Continue starting devices one at a time until everything is powered back up
Check for proper operation

Airport: Self-assigned ip address, can't connect (public routers only)

this has been talkeda bout before, but is extremely frustrating, because i don't have the problem with a PC.
1/2 of the public routers i connect to have some kind of login page, most the time they just say "youre getting free internet, click here" ... but sometimes that login page never comes up, and the network card says "airport has a self-assigned ip address and may not be able to connect to the internet"
this only happens on pulic routers for me, and only ones that have login pages.
its very odd because for example, starbucks has all the same routers, all are "attwifi" now .. i go to one, i get hte login screen, go to a different one, i don't get it...and can't connect
with a PC, i get it every time.
this is undoubtably a leopard problem, that needs to be fixed. please!

The wifi icon shows no connection with the network -- the "!" mark.
However the computer sees the network, i.e. when I search in Network Preferences the network is listed.
So: 1) the computer sees the network but 2) will not connect to the network. The reason given for refusal to connect is "self-assigned IP address".
Not to be repetitive but two other Mac laptops are connected to the same network and working perfectly. The network preferences, as shown in the "advanced" section, are the same for all machines, i.e. DHCP is selected and IPv6 is Automatic.

Airport self-assigned IP address, no internet

We got a new router from Verizon and my Mac will not connect. Network Status gave this message: 'Airport is connected to the network xxxxxx. Airport has a self-assigned IP address and may not be able to connect to the Internet.
How do I fix this an get connected to the internet?
Thanks in advance,
Mike from Baltimore

I have also encountered this problem and I have been researching it all over the internet all evening and trying everything I could find a suggestion for. Here's what I have: Two G4 Powerbooks, one is a 550MHz 15" Powerbook, the other is a 1.5 GHz 17" Powerbook, they are both running 10.4.11 with all the updates that Software Update has to offer, the 17" is connecting via built in Airport Extreme card, the 15" is connecting via Sonnets Aria Extreme PC card. I have AT&T DSL and I'm using the 2Wire modem/router they provided me with. Neither of the Powerbooks can connect wirelessly to the internet. Furthermore, they cannot even ping the wireless router. 4 days ago, both were connecting without any trouble (and had been able to reliably every day since the beginning of August when I hooked everything up). I have made no changes to my router's settings over the weekend. Nor had I made any changes to the Powerbooks' settings during that time. It just stopped working. If I wire one or both of them to the router with ethernet cables, connection works fine. My Desktop G4 which is normally wired into the router via ethernet, connects fine so I know my internet service is available.
So far, I've restarted both machines numerous times, restarted the router numerous times. Reset the WEP password. Changed the wireless security to WPA. Changed it back to WEP. Trashed the airport plist. deleted every wireless network entry in Keychain. Disabled DHCP and assigned IP numbers manually. Changed the wireless channel (I've tried 1, 6, and 11 with and without interference robustness).
I've been reading posts about this issue on half a dozen web forums (dating back to as early as June 2004). It appears to affect a variety of routers (2Wire, Netgear, Linksys), a variety of machines (Powerbooks, iBooks, MacBookPros, iMacs) a variety of OSes (10.3, 10.4, 10.5).
This thing is really getting me down. Anybody have any other ideas?

Airport does not have IP address and Self assigned IP address

Using a 2.66GHz Mac Pro with OS X.6.6 and a Netgear DNG200 wireless and installed Airport Extreme Card and WPA2 security.
In Network click on Airport and 'Turn on Airport' Up comes the message 'Airport dos not have IP address and is unable to connect to the internet'.
Go into advanced and double click 'Network Name'. Supply password even though remember is selected, and message changes to "Airport has Self Assigned IP address 169.254.etc.etc and will not be able to connect to the internet'.
After repeated back to Network Name and double clicking and supplying password eventually connects. Simple to reconnect by selecting Turn Airport On in Menu Bar so long as the machine is not turned off.
Any suggestions please?
Message was edited by: harryb

Hi,
http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/
Hope it helps.
Cheers.

Computer-to-computer Airport network no dice - "self assigned IP address"

I have spent hours reading posts on this and other forums about this problem with Airport, but none of the fixes have connected me to the Internet. My new iMac has a DSL line coming into it and an Airport card. My eMac has an Airport card too. I am not using a base station. The eMac recognizes the network I created, it even allows file sharing, but in the TCP/IP prefs, I get the dreaded notice about how the computer is using a "self assigned IP address and may not connect to the Internet." So I took one user's advie and set it up to use DHTP manually and I typed in an IP address of 10.10.10.x and my "network status" finally went from the yellow dot of death to green, saying I was connected to the Internet. But my browsers sure don't think so. I turned firewall off. Still no help. Do I have to turn firewall off on the iMac, from which the eMac is getting its Airport signal? I need a firewall, right? "Firewall good," right?
The issue was the IP address until I entered a manual one. Now the issue has changed. I am connected to the network, and at least technically to the Internet, according to the computer's ability to gauge such things, but I'm still not online. I have done the "unplug the DSL modem" thing, and unplugged the computers, and turned Airport on and off, trashed Airport prefs from the Library and all the sensible things people have mentioned online. I am hoping some fresh eyes see this. Can it have to do with my iMac's settings, not the eMac I'm having trouble connecting with? I've spent about 12 hours on this with no luck. Thanks,
George

O.K., I tried to launch the specified site in Safari and it never loaded anything or gave me an error message. The blue filled up the address bar to cover up "http://" but it didn't progress further. The IP address it self-assigned is 169.254.60.164. My iMac which should be Internet-sharing is not sending it a proper IP address.
Both computers are up to date with updates. The iMac has OS 10.4.10, and the eMac has 10.3.9 because I still run Classic mode. I don't know enough about computers to know if those system differences would cause a problem in Airport. They both have Airport Extreme cards. Any idea which settings in the source iMac I'm sending out the Internet signal from could cause this problem? I have personal file sharing on, personal Web sharing, and printer sharing.
In my Network preferences, under my SBC DSL, the IP address looks normal, starting with a 75, but under Airport, it starts with 169.254 like the eMac's IP address setting. I don't really understand these technical issues, and I've never dealt with a wireless network before. I guess I can always pony up $180 and use a base station, and problem solved. I would think. But computer to computer Internet sharing is supposed to work, so now I am obsessed with it. Thanks again.

Airport Connects but has Self-Assigned IP address and no internet

All right Apple this is some Bull#@$% I own 3 Apple units One is a MacBook Pro, one is a Macbook and the other is a G5 Dual processor tower. The MacBook and Tower are using OS X 10.5.5 and the MacBook Pro has OS X 10.4.11. Ok here is my problem all of a sudden all 3 units that had been connecting to the same wireless router for the past year started saying (AirPort has a self-assigned IP address and may not be able to connect to the internet) Apple Care suggested replacing the router well I did that and hello I have the same message. Its connecting but not going to the internet. Under network status I have green lights for Airport and Airport settings a yellow light for network settings and red lights for ISP, Internet and Server. I have this problem with both MacBooks both at the library, my friends house and my neighbors house thats 4 different wireless networks that do the same dang thing. I need help!!

I have also encountered this problem and I have been researching it all over the internet all evening and trying everything I could find a suggestion for. Here's what I have: Two G4 Powerbooks, one is a 550MHz 15" Powerbook, the other is a 1.5 GHz 17" Powerbook, they are both running 10.4.11 with all the updates that Software Update has to offer, the 17" is connecting via built in Airport Extreme card, the 15" is connecting via Sonnets Aria Extreme PC card. I have AT&T DSL and I'm using the 2Wire modem/router they provided me with. Neither of the Powerbooks can connect wirelessly to the internet. Furthermore, they cannot even ping the wireless router. 4 days ago, both were connecting without any trouble (and had been able to reliably every day since the beginning of August when I hooked everything up). I have made no changes to my router's settings over the weekend. Nor had I made any changes to the Powerbooks' settings during that time. It just stopped working. If I wire one or both of them to the router with ethernet cables, connection works fine. My Desktop G4 which is normally wired into the router via ethernet, connects fine so I know my internet service is available.
So far, I've restarted both machines numerous times, restarted the router numerous times. Reset the WEP password. Changed the wireless security to WPA. Changed it back to WEP. Trashed the airport plist. deleted every wireless network entry in Keychain. Disabled DHCP and assigned IP numbers manually. Changed the wireless channel (I've tried 1, 6, and 11 with and without interference robustness).
I've been reading posts about this issue on half a dozen web forums (dating back to as early as June 2004). It appears to affect a variety of routers (2Wire, Netgear, Linksys), a variety of machines (Powerbooks, iBooks, MacBookPros, iMacs) a variety of OSes (10.3, 10.4, 10.5).
This thing is really getting me down. Anybody have any other ideas?

Airport - Self Assigned IP Address Problems

I moved into a new place recently and having problems with my Airport connection on my MacBook Pro. I get the error
"Airport the self-assigned IP Address 169.254.23.207 and will not be able to connect to the internet" (obviously the IP varies)
It's only happened ever since I moved into this new place. Comcast is our ISP and we're using a Netgear Router my step brother bought a while back. I logged into the Router and all settings seem to be normal as far as I can tell. It only happens if the computer goes to sleep or is shut off, any situation where Airport is disabled. I usually have to keep turning Airport On and Off until it comes back. I logged into the router, none of the settings seem wrong. The ISP setting is set to Dynamic IP. It's using WPA and doesn't seem to have a problem with the key.
Here's a screenie: http://img217.imageshack.us/img217/9797/screenshot20100924at502.jpg
What could be causing this problem. It's extremely frustrating.

Of course a search for "macbook and connection dropouts" results in numerous pleas for help. That is what you searched for. Did you expect your search to find the millions of users who are not having "macbook and dropout" issues?
FWIW there are many reasons why a wifi connection will "fail or dropout", one of which may be a hardware issue. But more likely is interference, configuration, firmware, router, setup, security, not reading the manual, etc.
What would lead you to believe "Apple technicians apparently are mystified."?
I doubt very much that Apple is involved in a conspiracy of silence "Given all the macs with this problem, why is Apple silent on a fix? Is this actually a hardware problem that would require the replacement of every motherboard in every mac notebook with a faulty broadcom wifi chipset? " But then I don't subscribe to many conspiracy theories.
There are many more Macs without the problem you and others here in this help forum describe than there are with the problem.
Message was edited by: BobTheFisherman

HT3466 Airport has self assigned IP address 169.254.153.51 and will not be able to connect to the Internet

Cannot connect to internet wirelessly because I get the message "AirPort has the self-assigned IP address 169.254.153.51 and will not be able to connect to the Internet."

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Airport and a self-assigned IP address - can't access wireless net

I have a strange issue with Airport picking up a wireless network.
I'm not in my usual location using my MacBook Pro.
There is a wireless network here.
Airport sees it, and asks for the password (provided to me).
Airport looks connected, but, I see the message: "Airport has a self-assigned IP Address and may not be able to connect to the internet".
And in fact, it cannot. I've run through the diagnostics routine twice, and no go.
How do I get Airport to accept an IP address from this wireless configuration?

I am having a nearly identical problem. The solution provided did not work for me.
We have two MacBook laptops, one is mine and the other my wife's. My laptop still works fine. The AirPort communicates well with the wireless router. My wife's laptop just started having this problem about a week ago. The latest Airport software updates helped, but did not solve.
The problem is that I now have to go into network diagnostics everytime to connect my wife's laptop to the wireless router. I have to re-enter the password to the router each time. Once I enter the password, it finds the IP address and connects everything properly. I checked the keychain password and it is there, so I don't know why it keeps losing the IP address.
One thing that I did preceded this problem. I changed my router password to WEP. If anyone knows if this could cause the problem, let me know.

"Airport has a self assigned IP address & cannot connect to internet"

Hi, I'd appreciate any insight at all on this...
Apologies in advance for this vast post...!
(but I guess I may as well mention everything I've already tried...)
BACKGROUND:
I was recently trying to add an Airport Express Base Station to an existing ethernet and wireless network, which has been working flawlessly for 3 years.
(Network consists of an ethernet-connected G4 Dual 1.42 desktop running OS X.3.3, and two wireless-connected iBooks- one a 12" running OS X.3.5, the other a 14" on OS X.4.2).
For various reasons, I've now given up with the Airport Express, but ...
PROBLEM:
On the wireless 12" iBook- "Safari can't open the page "xxx" because it can't find the server "xxx"- ie, the internet connection is now wonky.(The problem is the same in Firefox, IE, and Camino too).
The fault must be with configuration on this laptop, as the other two machines on this network are still running and connecting normally with no problems at all.
What is the cause of this problem? (IP addresses? DNS server?)
WHAT I'VE TRIED SO FAR:
1. First looked at System Preferences --> Network --> Network Status, where I see this;
"Airport is connected to the network "Fritz!Box SL WLAN". Airport has a self-assigned IP address and may not be able to connect to the Internet."
Alongside it an amber button (which is usually green).
Then according to JohnHuber1's suggestion in Discussions on May 3rd 2006;
"Go to System Preferences --> Network and double click on Airport to open its preferences. Click on theTCP/IP tab and select Configure IvP4: "Using DHCP" and click on Apply Changes to save it."
I tried toggling this (it was already set this way), and then Restarted, but it hasn't helped.
I also tried clicking the 'Renew DHCP lease' button. Also hasn't helped.
2. Repaired permissions. It hasn't helped.
3. Read Apple KB article No:106798- 'Troubleshooting "Server could not be found" messages'.
From this article, it seems that
a) The problem cannot be caused by "an actual loss of internet connection", as the other 2 machines are still connecting fine.
b) Typing http://17.254.0.91 instead of http://www.apple.com makes no difference, therefore it doesn't APPEAR to be a DNS server problem. (?)
4. Tried to reconfigure the Airport settings using Network SetUp Assistant.
This allows me to select Airport as my connection method, select the network from the list; but once I've entered the network password and pressed 'continue', it then gives me a dialogue box, saying
"Unable to establish a network connection. Your computer could not connect to the internet. Click OK to go back and change your network settings and try again".
Returning to Network Prefs, I now see a box saying "Your Network Settings have been changed by another application".
I can't seem to get out of that vicious circle.
5. Opened a fresh Test Account, behaviour is the same here as in the regular user account.
6. Opened Network Utility, tried to 'Ping' on 17.254.0.91 (Apple site). Then tried to Ping my network router (192.168.178.1), and then also the other 2 computers on the network. Result in each case was "10 packets transmitted, 0 packets received, 100% packet loss".
What can I do to fix this problem? I suspect it's some small configuration checkbox in Network preferences which I've inadvertently altered.
But have I got any idea what I've done...?
Sorry for the epic post. But you get the idea...!
Thanks for your thoughts...
G4 Dual 1.42, FW800, 2GB RAM, (OSX.3.3), iBook G4 (1.2ghz, 1GB RAM, OSX.3.5) Mac OS X (10.3.3) 3 int.HDs, 3 Lacie ext.HDs, Logic Pro 6.4, RME Fireface 800.

Hi Grant, thanks for jumping in...
Have you removed the troublesome Airport Express?
Certainly have, that was Step 1 several days ago!
Are you using encryption?
Yes, I have to enter a password every time I've tried to use Network Set Up Assistant. I'm pretty sure I've got it right- it won't accept anything else.
Have you limited your network to only certain M.A.C. Addresses?
Not as far as I'm aware. Could I have done it inadvertently?
Is the Wireless Router set to allow the connection of slower 802.11b devices like the iBook?
Guess it must be... it worked fine before, and is still ok with the other 14" iBook.
Are you connecting to a Wireless Router and not to another Macintosh computer?
Hmm... I ASSUMED I was connecting to the WLAN router. The G4 desktop has no wireless capability itself, could I still be connecting to that regardless?
Internet access has never been affected in the past by that machine being on or off...
You will not be able to get anywhere until you have an IP address in the same subnet as your Router
(generally high octets the same, last octet different). Can you think of any reason why your Router
should not give you an IP address in this range?
Err... now I'm lost, sorry! What's an octet?
I really appreciate you taking the time to help me out Grant... sorry I'm not really up to speed!
Cheers, Andy.

Problems connecting Airport - self assigned IP addresses

Greetings,
I upgraded to a powerbook a few months back, and everything seemed to be working well enough until today. My internet connection (using airport on my powerbook) wasn't working. Usually I just unplug my modem, reconnect, and all works fine.
Today, to my horror, airport does not reconnect as usual and I see the note
AirPort has the self-assigned IP address xxx.xxx.xx.x and will not be able to connect to the Internet.
I've tried using snow leopard cache cleaner, I've tried restarting, I've turned off my iPhone, and disconnected my old mac connected by ethernet.
My iPhone works, using the same wifi, and there are other wifi users nearby.
Not sure what else to mention, any ideas?

try to do it manual:
decide a ipv4 close to your iphone (if iphone has xxx.xxx.x.7) like x.8
next, net-mask must be 255.255.255.0 (if there is something other it's wrong)
router is seen when you open network in iphone, take this.
could be like: 192.168.1.1, if your ip starts with 192 ...
all this in network/more options

Self Assigned IP Address with Airport Extreme

Similar Messages

Maybe you are looking for