Self Assigned IP? Can't connect~!

Self-Assigned IP? Cannot connect to the internet. I see the router/network name, I have good connection, but no IP? It assigns a 169.xxx.xx.xxx
-I have repaired permissions
-Deleted AirPort from the network list and re-added it
-Deleted plists
-Turned off the router and laptop, waited, turned back on
-Renew DCHP lease
Is there an order I can do things in or some other step? For some reason, it just STOPPED WORKING out of the blue today, and I have been trying to fix it for hours to no avail...
Router: Seimens Gigaset SE567
Mac OS 10.6.7
MacBook Intel Core2 Duo 2 GHz
AirPort Extreme Card

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Similar Messages

  • 10.5.5 Self Assigned IP OR no connection at all

    Okay, I'll try to condense this as much as possible. I have an imac, MBP, cell phone, and a couple gaming systems which connect to my network via wifi. All has been well for ages with this setup. 10.5.5 comes along and I didn't install it for a bit. Thursday I finally do it, and now my iMac cannot stay connected to the network. It also many times will not connect at all, simply saying connection failed
    The other devices all connect with no problem what so ever. I turned off my network security and same problem. I unplugged modem + router for 10 mins, problem persisted. I then fully reset my router and left it at default, same result. My iMac either gets no IP address, fails to connect at all, or does a self assigned IP which doesn't do anything because I still cannot get online. I also updated my router firmware with no effect (i tend not to do this unless I need to, it usually ends up causing more trouble than it fixes).
    My router is a netgear wgt624 v3. This first occurred when playing WoW. This had me checking the WoW forums for solutions. Over the past week, the problem has happened enough times without WoW being on for me to rule it out as a cause.
    My router is in the same room as the iMac, so this is not a range issue. The other devices connect fine, so it is not a shot router. I am at a loss for what to do. I am going to take the computer to another network in a couple of days when i have the time (school/work.. too busy) but I am unsure if that will help me much. If it works there I'll be further perplexed, and if it doesn't I guess it's time to consider a faulty airport card? I am under warranty still.
    Anyone know of a possible cause to this? Or how to further investigate. Aside from trying on another network I feel I have exercised all options.

    Very similar problem. Since upgrading to 5.5, my internet connection has been spotty. Now it seems to be gone for good. The very weird thing is I can ping my router, I can ping the DNS's (which are outside my network at my ISP) listed. I can ping anything, just can't get to the web or my email. None of my browsers can reach outside (Safari, Opera, Firefox, even ancient IE). I can't get my mail (Entourage). Up until now I've been more than happy with my new(ish) iMac.
    I have a hard-wired connection, with a fixed address, so I tried the Airport. No dice, same thing. Reset my hard connection, same thing. Turned everything off then on then off then on again.
    Any other computer in the house has no problems, just my newly upgraded Leopard iMac.
    I was about to go bonkers when I checked my properties on my old XP machine. Somehow the aforementioned DNS addresses had been changed. This is very mysterious, none of my other computers had the DNS addresses as my iMac and I had not changed them since buying the computer. I entered my correct DNS addresses and voila, connection again.
    Bottom line? Check your DNS addresses and see if they've mysteriously been altered. And if anyone else has had this odd problem Apple should know about it.
    Another oddity is that when I originally opened my network panel the "Firewire" connection was highlighted. I have never used that one.
    Very strange.

  • "Airport has a self assigned IP address & cannot connect to internet"

    Hi, I'd appreciate any insight at all on this...
    Apologies in advance for this vast post...!
    (but I guess I may as well mention everything I've already tried...)
    BACKGROUND:
    I was recently trying to add an Airport Express Base Station to an existing ethernet and wireless network, which has been working flawlessly for 3 years.
    (Network consists of an ethernet-connected G4 Dual 1.42 desktop running OS X.3.3, and two wireless-connected iBooks- one a 12" running OS X.3.5, the other a 14" on OS X.4.2).
    For various reasons, I've now given up with the Airport Express, but ...
    PROBLEM:
    On the wireless 12" iBook- "Safari can't open the page "xxx" because it can't find the server "xxx"- ie, the internet connection is now wonky.(The problem is the same in Firefox, IE, and Camino too).
    The fault must be with configuration on this laptop, as the other two machines on this network are still running and connecting normally with no problems at all.
    What is the cause of this problem? (IP addresses? DNS server?)
    WHAT I'VE TRIED SO FAR:
    1. First looked at System Preferences --> Network --> Network Status, where I see this;
    "Airport is connected to the network "Fritz!Box SL WLAN". Airport has a self-assigned IP address and may not be able to connect to the Internet."
    Alongside it an amber button (which is usually green).
    Then according to JohnHuber1's suggestion in Discussions on May 3rd 2006;
    "Go to System Preferences --> Network and double click on Airport to open its preferences. Click on theTCP/IP tab and select Configure IvP4: "Using DHCP" and click on Apply Changes to save it."
    I tried toggling this (it was already set this way), and then Restarted, but it hasn't helped.
    I also tried clicking the 'Renew DHCP lease' button. Also hasn't helped.
    2. Repaired permissions. It hasn't helped.
    3. Read Apple KB article No:106798- 'Troubleshooting "Server could not be found" messages'.
    From this article, it seems that
    a) The problem cannot be caused by "an actual loss of internet connection", as the other 2 machines are still connecting fine.
    b) Typing http://17.254.0.91 instead of http://www.apple.com makes no difference, therefore it doesn't APPEAR to be a DNS server problem. (?)
    4. Tried to reconfigure the Airport settings using Network SetUp Assistant.
    This allows me to select Airport as my connection method, select the network from the list; but once I've entered the network password and pressed 'continue', it then gives me a dialogue box, saying
    "Unable to establish a network connection. Your computer could not connect to the internet. Click OK to go back and change your network settings and try again".
    Returning to Network Prefs, I now see a box saying "Your Network Settings have been changed by another application".
    I can't seem to get out of that vicious circle.
    5. Opened a fresh Test Account, behaviour is the same here as in the regular user account.
    6. Opened Network Utility, tried to 'Ping' on 17.254.0.91 (Apple site). Then tried to Ping my network router (192.168.178.1), and then also the other 2 computers on the network. Result in each case was "10 packets transmitted, 0 packets received, 100% packet loss".
    What can I do to fix this problem? I suspect it's some small configuration checkbox in Network preferences which I've inadvertently altered.
    But have I got any idea what I've done...?
    Sorry for the epic post. But you get the idea...!
    Thanks for your thoughts...
    G4 Dual 1.42, FW800, 2GB RAM, (OSX.3.3), iBook G4 (1.2ghz, 1GB RAM, OSX.3.5)   Mac OS X (10.3.3)   3 int.HDs, 3 Lacie ext.HDs, Logic Pro 6.4, RME Fireface 800.

    Hi Grant, thanks for jumping in...
    Have you removed the troublesome Airport Express?
    Certainly have, that was Step 1 several days ago!
    Are you using encryption?
    Yes, I have to enter a password every time I've tried to use Network Set Up Assistant. I'm pretty sure I've got it right- it won't accept anything else.
    Have you limited your network to only certain M.A.C. Addresses?
    Not as far as I'm aware. Could I have done it inadvertently?
    Is the Wireless Router set to allow the connection of slower 802.11b devices like the iBook?
    Guess it must be... it worked fine before, and is still ok with the other 14" iBook.
    Are you connecting to a Wireless Router and not to another Macintosh computer?
    Hmm... I ASSUMED I was connecting to the WLAN router. The G4 desktop has no wireless capability itself, could I still be connecting to that regardless?
    Internet access has never been affected in the past by that machine being on or off...
    You will not be able to get anywhere until you have an IP address in the same subnet as your Router
    (generally high octets the same, last octet different). Can you think of any reason why your Router
    should not give you an IP address in this range?
    Err... now I'm lost, sorry! What's an octet?
    I really appreciate you taking the time to help me out Grant... sorry I'm not really up to speed!
    Cheers, Andy.

  • Self-assigned IP, no internet connection status with FIOS?

    a friend just had FIOS installed at her house and after it was set up she was able to connect to the internet. i came over later in the day to join her airport express to this WiFi network by using airport  utility (she wanted to have her printer available on the network). after i tried setting it up using her macbook (it failed because the WEP key used by verizon is 64 bit and apple only supports 128 bit) and rejoined the FIOS router network we lost the internet connection. in network preferences it showed a self--assigned IP address but no internet connection status. i've tried deleting this network from the joined network list, deleted the password from keychain and then rejoining the network, putting in the password when prompted. still the same "no internet connection" status. any ideas?
    thanks!

    Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved. 
    For future reference.
    My TC is a 3rd gen.
    I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
    The airport utility then signaled to issues remaining:
    1) Internet access was cut - this I solved by simply reseting the cable modem
    2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
    I did have AppleCare....
    I'm online again and I hope for good.
    Thanks a lot
    PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration

  • Airport self assigned IP not able connect to Internet

    I'm trying to connect my Mac Pro WiFi for the first time and have Airport turned on. Status says Airport hasna self-assigned IP adress and will not be able tonconnect to the Internet.
    Anyone know how to get Airport to connect?
    Thanks,
    Steven

    Thanks Linc, after clicking AirPort, Status is On and the correct network is showing in Network Name. when I click Advanced under AirPort tab the network shows in Preferred Networks the network I want to use.
    In the TCP/IP tab Configuration IPv4 "Using DHCP" pulldown is selected and the IPv4 Address is the same as the previous screen where it says AirPort has the self assigned IP address and won't be able to connect to the Internet. Hmmm.
    What I don't understand is that use this same network without any issues on my iPad and iPhone. Just Mac Pro AirPort is having a problem.
    Thanks,
    Steven

  • Hi, I have a MacBook Pro and a PC both connected to a TC who in turn is connected to a cable modem. I have no wifi accessfrom my MacBook pro (self assigned IP - no internet connection msg) while I do on PC through ethernet? can anyone help?

    I was working yesterday afternoon when the wifi suddenly went cold. Initially on the MacBookPro and on the ethernet connected PC. I reinitialized modem and TC  through the mac and then the ethernet on the PC worked again and has since. 
    I've reinitialized both the modem and TC many times, as well as checked the cables. Moreover, I've tried to renew the DHCP lease, provide the DNS servers manually, erased all networks in Network preferences and in KeyChain etc. but nothing seems to work.
    One strange thing also happened. I had two networks created, one for me and one I created for guests. The latter one just vanished, dissapeared without a trace.
    I've tried from the café down the street and the Wifi worked perfectly well though a little slow, but that could be their connection not the Airport. Therefore, my  I deduct that there is either something wrong in the TC or something went wrong in the network settings in the Mac. But that doesn't help to move forward and fix the darn thing.
    The only thing I haven't done is completely reset the TC, but after reading a couple of help threads on different forums I'm confused as to how to proceed to get it back to worrk? Has anyone had the same or similar issue and found a solution?
    Thanks

    Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved. 
    For future reference.
    My TC is a 3rd gen.
    I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
    The airport utility then signaled to issues remaining:
    1) Internet access was cut - this I solved by simply reseting the cable modem
    2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
    I did have AppleCare....
    I'm online again and I hope for good.
    Thanks a lot
    PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration

  • Self-assigned IP !!! Can't connect via Ethernet

    Hi all,
    This is my problem:
    - Now every time I connect my MBP (running 10.6.4) to my hall's network (staying on campus, in uni) it appears as "Self-assigned IP" and cannot connect to the internet for the Ethernet. It suddenly happened a few days ago and I have no clue what caused that
    - Airport's working well
    - Using Windows on Parallels and can still connect to the Internet despite that the Mac OS X does not at the same time, my friends' laptops have no problems as well
    - Tried taking the IP, subnet mask, router( I suppose in Windows it is called Gateway ) details and typing in manually for the Ethernet settings on OSX but still cannot connect to the Internet. The status is Connected and "Ethernet is currently active and has the IP address 137.xxx.xx.xx."
    - When I bring my laptop to a different place and connect via Ethernet, it works well, too, I just leave the setting to be "Using DHCP"
    I've seen that lots of people have met this issue, also loads of advices have been given:
    - reset the router ... --> I'm connecting to the hall's network, so that's impossible for me to do
    - sudo ipfw list , sudo ipfw flush .. --> nothing changed afterwards
    - someone suggested uninstalling any VMware --> tried uninstalling parallels desktop and the problem's still there
    - untick the "Use Passive FTP Mode" for ethernet --> no difference
    - Security settings ,Firewall --> firewall was even off when the issue 1st appeared
    So ANY SUGGESTIONS PLEAAASSSSSSSSSEE !!!! I'm sick of having to turn to Windows just to access the internet
    Thanks in advance

    fr1d4y13 wrote:
    Apart from this one "*4) In the folder /Library/Preferences (not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.* " , I've tried all the other ways suggested but didn't work.
    I'm wondering what it means by "move" here :? Is that "copying and then delete the original" :??
    A "move" operation is normally considered equivalent to (although more efficient) than "copying and delete the original". Just drag the folder out of its original folder and onto the Desktop, which will make it be no longer in its original folder.
    I've seen others post advice about moving out specific files in that folder. That probably works just as well if not better (as it leaves in place other files not involved in networking), but I haven't spent the time to determine just which files should be moved.

  • Self-assigned ip address -- can't connect to Airport

    I have a 2006 MacBook Pro which recently started exhibiting the exact same behaviour as reported by another poster in 2011:
    For some reason the computer has started self-asigning its IP address and Network Preferences says that, because of the self-assigned IP, i cannot connect to the network.
    I have two other Macs connecting to the same Air Port with no issues and I've tried to duplicate those settings on the MacBook Pro but still get the "self-assigned ip" message
    Tried re-setting SMC and PRAM, no change.
    The only change to my wireless setup was the change from a Verizon-owned modem to an owned Motorola unit (but the MacBook Pro connected successfully, many times, after the change).
    I didn't knowingly change anything on the MacBook Pro -- from one day to the next it just stopped connecting.
    I'm really at a loss to understand what's going on and, of course, not happy that the MacBook Pro can't connect to my network anymore! Help!

    The wifi icon shows no connection with the network -- the "!" mark.
    However the computer sees the network, i.e. when I search in Network Preferences the network is listed.
    So: 1) the computer sees the network but 2) will not connect to the network. The reason given for refusal to connect is "self-assigned IP address".
    Not to be repetitive but two other Mac laptops are connected to the same network and working perfectly. The network preferences, as shown in the "advanced" section, are the same for all machines, i.e. DHCP is selected and IPv6 is Automatic.

  • Bizarre WiFi Connectivity Issue; Self-Assigned IPs, Static IP Doesn't work

    The short and sweet of the problem: Macs/Apple Devices are pulling self-assigned IP addresses when connecting to a Linksys EA6900/AC1900 router.
    Here’s the detail: I am working at an office with 1 Airport Extreme and 1 Linksys EA6900/AC1900, both are configured for Bridge Mode and both use WPA. DHCP is being handled by a Watchguard XTM5 series firewall.
    When Macs (and often iPhones) connect to the Linksys (on 2.4 or 5Ghz) they get a self-assigned IP address. If you enter a manual address you still do not have any connectivity. However, if you connect to the Extreme you will instantly get an IP address, and if you switch to the Linksys your DHCP address will carry over and you will retain connectivity. This problem does not happen to the Windows machines in the office- they all connect to all base stations without any issue. Total users on the network range from 5 to 20 WiFi users at any given time plus and AppleTV (also affected).
    More info: When there are between 5-10 people in the conference room for a morning meeting the Macs will all revert to self-assigned addresses (even if they were working before). The workaround has been to connect to the Extreme, but there are occasions when this occurs that the Extreme will also not seem to pass the DHCP addresses from the firewall; addresses become self-assigned and you lose all internet. To make matters more odd, this behavior seems to really only affect the network during business hours; after hours the Linksys works pretty much normally and any device can connect without issue.
    Things I’ve done: Run Wireshark and located a number of rogue devices that were handing out overlapping DHCP addresses. Identified machines that were ARP storming and removed them. Expanded the DHCP pool so that we aren’t running out of addresses and confirmed that we had enough by checking the logs.
    More things I’ve done: Used Netspot to check signal strength and channel overlap and isolation. I have mapped the signal strength by location and we have strong signals to the various locations (the Linksys AP is 7 feet from the conference room). I have checked that the firmware is the most recent version.
    I can’t find any logical reason for the Macs (and pretty much only the Macs/Apple devices) to not be picking up DHCP info through the bridge mode devices. I would tell them to get another Extreme but they are going to be deploying a Cisco Meraki system soon and I suspect that this problem will persist since the Linksys was put in place because the last AP displayed the same behavior with the Macs picking up self-assigned IPs. Affected Macs range from 2010 era MBP and Air to 2013 MBP and Air and they are running OSX 10.8 through 10.10.
    As for the history of this network, I just walked into this company and know very little about how well it worked before, but apparently it has always been flaky according to the staff.

    I agree that something isn't right; I am going to cut over DHCP services from the Watchguard to the newly deployed OS X Server tonight and see  if that changes anything.
    On the other hand, faulty DHCP server/client settings doesn't explain why applying a static IP still leaves you with no connectivity. I think that clue is also fairly important but I can't figure out what would be blocking connectivity on a static IP setup.

  • Self-assigned IP****cannot connect to university wireless network

    After i installed snow leopard I cannot connect properly to my university network. It says that a self assigned IP and cannot connect to the internet.
    I have tried many things but nothing seems to change this problem
    I need to be able to connect to the internet at school.

    I have the same problem with the Exchange server at my work. Once I loaded Snow Leopard, no access. I can get on my Time Machine at home fine and can even access the open WAP at work, but since Snow Leopard access to the Exchange server is gone. The hype for Snow Leopard says easier access to Exchange services but I can't find any info on what that means anywhere. Anybody find the Exchange info?

  • Can't connect to wireless via Airport - Other's on my network can though :/

    I woke up this morning to no internet on my mac. I usually use Airport, and it usually automatically connects, but today it made me type in my WEP key again, so I did, and still no internet. I have FiO's so I went on Verizon's chat service and they said it wasn't the Router because my xbox, other pc's, etc - were connected via wireless network, so it had to be my mac. Everytime I try to connect, it picks up the wirless network, I type in my WEP key and the Airport icon get's 5 bars, but then when I open up my browser, an exclamation comes up over the sign and it says "No internet connection". Just a little side note, it said that the airport doesn't have an IP address, and sometimes it say's it does, but because it was automatically assigned, it can't connect. Also, the DNS tab, under System Preferences > Network > Advanced, shows no ip's it's just all blank. I have a 2007 Macbook. I called up Apple and before I could even tell them my name, they told me I was un-eligible for help and hung up on me, great people they are. If I could, I would take this mac back and get my $1150 I paid for it, back. So now this is my last resort. Please post if you have any idea how to fix this. By the way: I am on an ethernet cable, so the internet and wireless obviously works. It has to be my mac, right?

    I was having the same problem with the wifi not connecting to our home network on only one of our Macbooks.  It kept giving itself a self assigned ip address.  Everything else would connect fine to the home network and the computer with the problem connected fine to every other network aside from our home wifi.  After reading this thread and trying everything on it, this is what finally fixed it:  I didn't have anything under the 802.1x tab either.  So I:
    Turned the Airport off and completely deleted the Airport in network preferences.
    Then I went to keychain access and deleted EVERY wifi network password saved under both Login and System. 
    I turned the computer off and removed the battery and did the SMC reset by holding down the power button for 5 seconds. 
    When I restarted the computer, I reset the PRAM by holding down OPTION, COMMAND, P, and R at the same time RIGHT AFTER I pushed the power button to turn it on and before the grey screen appeared. 
    It reset and when the computer was back on, I added the airport again and joined my home WEP wfi network.  It worked perfectly!  Now I don't know if all of these steps are required to fix the problem but this is what worked for me.  The Macbook with the problem was a black Macbook running 10.6.8.  Good luck!

  • Self Assigned IP from my macbook pro to xbox through ethernet...

    I live in a college dorm and i have been using internet sharing through an ethernet cable to connect to xbox live and it has been working fine for months now, but has now recently decided to make everything difficult and it continuously just says self assigned IP address cannot connect to internet. Every video and forum I have tried reading generally refers back to something involving the router however in this case my wifi is working no problem its just the ethernet cable going to my xbox that has the self assigned IP problem. If anyone could help me it would be greatly appreciated, thank you! 

    It isn't clear what you are trying to do.  Why are you connected to the Xbox?  Is the Xbox suppose to share the internet through your mac?
    Since there is so little information, I'm going to go through a lot of stuff you might already know.
    You have two network interfaces on your Mac.  en0 which is the cable and en1 which is the wireless.
    IP addresses are assigned through a process called DHCP.  When you have a self-assigned address there is no DHCP server.
    The DHCP server -may- be on a router or it may be on several different devices such as a Unix computer (or Linux) specifically set up to provide DHCP addresses.  Since you are in a dorm, is is quite likely a specifically configured host is providing DHCP.
    Your wireless network will get a different DHCP address than your wired network.  For example, 128.1.0.0/16 might be the network assigned to the wireless to support 253x253 different hosts (a lot of hosts and the main reason to keep DHCP off of the router).  And something like 129.1.0.0/16 would be assigned to the wired network.
    The DHCP server for the wireless network WILL NOT provide an address for en0.
    NOTE: I have never used Apple's Internet Sharing and I -assume- that when you share that the Mac acts like a bridge.
    I also assume that this is what you are attempting to do with your Xbox.  This would mean that the Xbox would have to initiate a DHCP request for an address that is forwarded (bridged) through the Mac to the DHCP server.  This request includes the Xbox hardware address.  Now comes the part that is going to make you cry.  MAC addresses are 48 bits and look like AB:CD:EF:12:34:56.  The first 24-bits are assigned to a manufacturer and used for specific products.  When the DHCP request gets to the DHCP server, it knows that the request is from an Xbox.  Your campus may have decided that you've been playing too many games and does not respond with an IP address for the Xbox.
    You can check this out by using a tool called tcpdump or you can install Wireshark.  If you want to go down this rabbit hole, it is going to require quite a bit of time and you'll end up becoming quite well educated in how networking works.  People go to school for years to understand this.  :-)
    Or, maybe you just forgot to ensure internet sharing was on.
    If you have some other kind of wiring setup then perhaps you have a different problem.
    BTW, when you plug the ethernet cable from the Xbox into the mac that "activates" it. 
    By default OSX is configured to use DHCP to provide an address.
    If the Mac sends out DHCP requests over the ethernet cable and never gets a response it will then self-assign an address.
    A self-assigned address cannot be used to get to the internet.
    (But, I understand that it your Xbox that isn't working not the Mac, especially since you were able to post your question here.)

  • Self-assigned IP on one device at startup which eventually corrects itself

    I use a Time Capsule as my primary wireless router (full disclosure: an Airport Express also acts as a repeater, and a wired Netgear router is also connected). 8 out of 9 devices connect wired and wirelessly without any issue, except for a wireless MacBook Pro which always boots and wakes with a self-assigned IP (no internet connection) despite a successful connection to my WPA wireless network. After 3-5 minutes, and perhaps coincidentally after a Time Machine backup is started manually or automatically, the internet connection rights itself.
    I have tried every solution I could find - at least a dozen - including resetting all devices and waiting, deleting airport preferences, renewing DHCP lease, uninstalling and reinstalling Airport, deleting and creating locations, deleting keychain entries, turning off firewall, updating firmware and software, safe mode reboot, etc. Can anyone offer any last wisdom?

    Siouxnil wrote:
    deleting airport preferences, renewing DHCP lease, uninstalling and reinstalling Airport, deleting and creating locations
    From your description I'm guessing you tried the steps below. If not, you might try the remaining ones.
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    3) In the same panel as (2), define a new location and see if you can make that work.
    4) In the folder /Library/Preferences (not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip agrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore

    I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip addrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore. i tried everything I can think of. It is a 2010 macbook pro but i recentrly updated to osx lion and even with lion it was working fine so I nkow it is not the update. also Im able to connect to other internets at home it works great. starbucks too.  but i became so frustated that i reset my computer to manufactuter setting and reinstall snow leopard on it. still I cant connect. I need help please i have been searching all over the web for help and i see people has been having this same problem for years now.. oh yeah and i know it is not the internet cuz there are other macs connecting to it without a single problem so i think it is an isolated problem plase help....i have follow many advises such as delete the internet from your prefered netwoks. restar your commputer etc etc.

    Be sure Safari does not have the Block Pop-Up Windows preference set.
    Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Maybe you are looking for

  • Migration CC and FF data from Virsa 4.0 to GRC 10.1 Data Inconsistency

    Hello Guru's We have done Migration from VIRSA 4.0 Compliance Calibrator (CC) and Firefighter (FF) data from  to GRCAC 10.1 system. After Migration, data inconsistency is coming while validation. Followed standard sap migration guide virsa 4.0 to 10.

  • Painful Mail and .Mac issue.

    I own 2 domains and therefore have my own email addresses for them. I also have a .Mac account and use that as my main mailbox getting everything forwarded into it and then picking it up with Mail.app. The problem is that I never want to send mail vi

  • How can i redownload my software on a new computer?

    I bought Adobe Design Premium 2 years ago and i recently bought a new computer to work on. I want the software on both. How can i redownload the software onto both computers? I originally download the software from the Adobe store online and used the

  • An interview with the guy who finally nailed the end of "The Next Episode"

    http://noisey.vice.com/blog/an-interview-with-the-only-person-ever-to-nail-the-smoke-weed-every-day-... This might be the best Vine ever made This topic first appeared in the Spiceworks Community

  • No icloud icone in system preference

    HI, I have Mac book air version 10.6.8 when I go on system preference I don't find icloud icone to click in. May be when I installed I answered no to some question on icloud , what I have to do to have it in my mcbook air? thanks marco