Self Assigned IP - Fixed, but help still needed, please
I'll add a bit of a back story first which I hope will help people understand my issue, but also hopefully lead people with a self-assigned IP issue to a fix (link is within the post)
I’m on on an iMac 20″ Mid 2007. I recently updated to OSX Lion after having wifi connection issues in Leopard. I used to randomly get kicked off my wifi and given a self assigned IP. With Leopard, the issue was fixed by applying a manual IP, router address etc and restarting. The issue would return months later, but I got over it after a few tantrums.
Then as soon as I updated to Snow Leopard, I instantly had no internet access and I could only upgrade to Lion if I downloaded system updates. So after a few hours of searching, I toggled my internet sharing ‘on & off’ and that was enough for that fix.
But then I upgraded to Lion and again, no internet. And nothing worked for me at all, every fix on the internet I tried failed. If my airport ever managed to connect to my router I would get a self assigned IP. Or it would say it was connected but there was no internet. So I hunted for hours and eventually found this:
Now, here is a fix for anyone who is having the same issue. I hope it works for you!
http://www.davidpierron.com/index.php/archives/2009/04/13/289/
This did work for me. The fix is to flush your ipfw through terminal, and it worked for me instantly.
However, I now have another issue that I really hope people can help me with. It's not as annoying as the above, but my god it's still very annoying!
Here are some bullets to show the tedious routine I have to go through in order to connect to the internet via my airport.
• I turn on my mac and my it tries to connect to my router automatically. But after a minute of trying, it says it can’t connect.
• I select my router manually from the list and have to enter my password manually, even though it is already saved in my Keychain.
• It then connects and says, ‘Connected but no internet’, so I leave it for two minutes and throw things around the room.
• After those 2 minutes it connects to the internet. But no, I can’t browse the web as the browser says 'DNS look up failure'.
• So I open terminal, enter 'sudo ipfw flush' to flush my ipfw and BINGO, I’m online 5 minutes after logging on to my machine.
The router I am using was only issued to me 8 months ago by my new ISP here in the UK, it connects via WEP and has always been stable for every other device I have connected to it. But I am going to ring up my ISP and see if there is a new router I can get.
If anyone - ESPECIALLY APPLE who seem to be shying away from admitting there has ever been an airport wifi issue - has any information to advise me, then please let me know.
Also if you are having a Self Assigned IP address issue and that fix above works, give the man some credit on his blog, and if you know him, give him a kiss from me!
Thanks
Update:
I spoke to my ISP to see if they had any newer routers and if they did WPA now.
I have a new router on its way and they have updated my router to do WPA!
The result?
I now connect to my router automatically after a restart. No issue there.
However,
It still can't find the internet when it first connects.
I still have to wait 2 minutes for it to find the net.
I still have DNS issues once connected
I still have to flush ipfw before it works correctly.
Similar Messages
-
Email help still needed please
In my set up wizard, for email, I have only 2 options:
1. i want to use a work email account with a Blackberry Enterprise Server
2. I want to skip email set up.
How do i therefore access email setup?
I have a Pearl 8120.
Thanks for helpWelcme to the Frums!
Do you have BIS or BES?
Nurse-Berry
Follow NurseBerry08 on Twitter -
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212 -
I tried changing my payment and billing info the way the website told mev to but it still says please contact apple support, so what do I do now?
You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards. -
Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???
Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222
-
As with a number of users in the community, my wired Ethernet connection has reverted to a self-assigned IP. Are there any viable solutions to this problem?
OK, so I hit this problem yesterday and I thought it was just one friend's mac. This morning I found that several macs were having the same problem on wifi. (Ethernet was OK, but not wifi.) I have SOLVED it for me - so here's the info in case it helps!
NB - I have tried most of the solutions on most of the help threads. (Once, years ago, I had the same problem, and one of the fixes I found back then did work. I think it was either deleting the wifi setting from Network Preferences or fixing the keychain or both. But this time, those fixes were achieving nothing.)
Anyway, the solution was simple! My modem-router included a setting for its DHCP server that was limited to 20 addresses. In other words, it was offering addresses from 192.168.1.1 to 192.168.1.20. At first I dismissed that possibility, since you'd think 20 would be plenty for one house! However, I was very wrong. Here's why.
1. Yes, we do own several Macs, and some of these are connected by ethernet AND wifi, so those ones use two addresses each.
2. Yes, we own several iPhones, iPods, an AppleTV etc.
3. Yes, we had visitors in the house. My daughter's friend had brought her iPad; my parents had brought their laptops and their phones!
4. I have an Airport Extreme and a Time Capsule, both connected (in Bridge Mode) to the modem-router, so that's two more addresses.
5. Remember that DHCP leases last for 24 hours (or whatever your router is set to), so even when visitors are gone or machines are turned off, those addresses might not become free.
SOLUTION? I changed the router's setting to offer all addresses up to 192.168.1.40. (I might even go back and offer even more than 40 - no reason why not).
My wifi macs had no trouble from that point. Hope this helps!
[NB - The reason my ethernet was always OK was that those connections had been running a long time. But if an Ethernet connection had gone down, and I had reconnected it at a time when its address had been stolen by another device, then I likely would have hit the same "self-assigned IP" error. In other words, in my case I don't believe the issue made any real distinction between wireless and wired connections.] -
I still need help to get this script working.
<?
PHP Guestbook 1.1
Written by Tony Awtrey
Anthony Awtrey Consulting
See http://www.awtrey.com/support/dbeweb/ for more information
1.1.ora - Mar. 29, 2000
- Version for Oracle by Kari Pannila
kartsa@_NO_SPAM_ougf.fi
1.1 - Oct. 20, 1999 - changed the SQL statement that reads data
back out of the database to reverse the order putting the
newest entries at the top and limiting the total displayed
by default to 20. Added the ability to get the complete list
by appending the URL with '?complete=1'. Added the code and
additional query to count and list the total number of entries
and included a link to the complete list.
1.0 - Initial release
This is the SQL statement to create the database required for
this application.
CREATE TABLE GUESTS (
GUEST_ID NUMBER (4) NOT NULL,
GUEST_NAME VARCHAR2 (50),
GUEST_EMAIL VARCHAR2 (50),
GUEST_TIME DATE,
GUEST_MESSAGE VARCHAR2 (2000),
PRIMARY KEY ( GUEST_ID )
CREATE SEQUENCE GUEST_ID_SEQ
START WITH 0
INCREMENT BY 1
MINVALUE 0
NOCACHE
NOCYCLE ;
// This checks to see if we need to add another guestbook entry.
if (($REQUEST_METHOD=='POST')) {
// This loop removed "dangerous" characters from the posted data
// and puts backslashes in front of characters that might cause
// problems in the database.
for(reset($HTTP_POST_VARS);
$key=key($HTTP_POST_VARS);
next($HTTP_POST_VARS)) {
$this = addslashes($HTTP_POST_VARS[$key]);
$this = strtr($this, ">", " ");
$this = strtr($this, "<", " ");
$this = strtr($this, "|", " ");
$$key = $this;
// This will catch if someone is trying to submit a blank
// or incomplete form.
if ($name && $email && $message ) {
// This is the meat of the query that updates the guests table
$query = "INSERT INTO guests ";
$query .= "(guest_id, guest_name, ";
$query .= "guest_email, guest_time, guest_message) ";
$query .=
"values(guest_id_seq.nextval,'$name','$email',SYSDATE,'$message')";
// This is where we connect first time to the database
$c1 = ocilogon("chukws","ikechi","orcl");
$stmt = ociparse($c1,$query);
OCIexecute($stmt,OCI_DEFAULT);
OCIFreeStatement($stmt);
OCICommit;
} else {
// If they didn't include all the required fields set a variable
// and keep going.
$notall = 1;
?>
<!-- Start Page -->
<HTML>
<HEAD>
<TITLE>Add a Message</TITLE>
</HEAD>
<BODY BGCOLOR="white">
<H1>Add A Message</H1>
<!-- Let them know that they have to fill in all the blanks -->
<? if ($notall == 1) { ?>
<P><FONT COLOR="red">Please answer all fields</FONT></P>
<? } ?>
<!-- The bits of PHP in the form allow the data that was already input
to be placed back in the form if it is filled out incompletely -->
<FORM METHOD="post" ACTION="koe.php">
<PRE>
Your Name: <INPUT
TYPE="text"
NAME="name"
SIZE="20"
MAXLENGTH="50"
VALUE="<? echo $name; ?>">
Your Email: <INPUT
TYPE="text"
NAME="email"
SIZE="20"
MAXLENGTH="50"
VALUE="<? echo $email; ?>">
Enter Message:
<TEXTAREA NAME="message" COLS="40" ROWS="8" WRAP="Virtual">
<? echo $message; ?>
</TEXTAREA>
<INPUT TYPE="submit" VALUE="Add">
</PRE>
</FORM>
<HR>
<?
// This is where we count the number of entries.
$c1 = OCIlogon("chukws","ikechi","orcl");
$query = "SELECT COUNT(*) FROM guests";
$stmt = OCIparse($c1,$query);
OCIexecute($stmt);
OCIFetch($stmt,OCI_DEFAULT);
$numguest = OCIResult($stmt,1) ;
?>
<!-- This is where we report the total messages. -->
<P>
<? echo $numguest[0]; ?> people have
left me a message.
</P>
<?
// This is where we decide to get all the entries or just the last 20.
// This variable is set by just adding a '?complete=1' after the URL.
$c1 = OCIlogon("chukws","ikechi","orcl");
if ($complete == 1) {
$query = "SELECT guest_name,guest_email,to_char(guest_time,'DD.MM.YYYY
HH24:MI:SS'),guest_message FROM guests ORDER BY guest_time DESC";
} else {
echo "Here are the first 20:<BR><br>\n";
$query = "SELECT guest_name,guest_email,to_char(guest_time,'DD.MM.YYYY
HH24:MI:SS'),guest_message FROM guests WHERE ROWNUM<21 ORDER BY
guest_time DESC";
$stmt = OCIparse($c1,$query);
OCIexecute($stmt,OCI_DEFAULT);
// This will loop as long as there are records waiting to be processed.
// Notice the plain HTML inside the while loop structure. PHP is
flexable
// enough to allow you to break into and out of the "code" at any point.
// ------------------------ while start
while (OCIFetchInto($stmt, &$guest)) {
?>
<TABLE BORDER="1" WIDTH="700">
<TR><TD>
Name: <? echo $guest[0]; ?>
</TD><TD>
Email: ">
<? echo $guest[1]; ?></A>
</TD><TD>
Time: <? echo $guest[2]; ?>
</TD></TR>
<TR><TD COLSPAN="3">
<? echo $guest[3]; ?>
</TD></TR>
</TABLE>
<BR>
<?} // end while ?>
</BODY>
</HTML>
Am getting the following error,
Parse error: parse error, unexpected T_WHILE in d:\application\product\10.1.0\db_2\apache\apache\htdocs\koe.php on line 182
Can CJJ and others please help. ThanksReplace your line <?} // end while ?> with
<?} // end while
?>
Regards,
Torsten -
Thanx Noeqplease & Bee jay but I still need some help form U or anyone out
Answer From Noeqplease
'Hi Teebow,
You need to set up a simple pair of transformers, in your audio Layer.
One transformer will feed MIDI channel 1, and one, MIDI channel 2, in your arrange page, for recording.
First, create a simple Environment Object, and call it whatever you like (key splitter is good). This is so you can send one midi stream ot both Transformers.
Cable this to the following two Transformers:
The first Transformer will FILTER all notes BELOW your set parameter, ie whatever note you decide. This is the TOP of the keyboard split. Hook this up to your first Audio Instrument channel. this would be the melody instrument.
The second transformer will FILTER all notes ABOVE your set parameter, ie whatever note you decide. this is the BOTTOM of the keyboard split.Hook this up to your second Audio Instrument channel. This would be the Bass instrument.
In the Arrange Page, create your two instruments, and then select the TRANSFORMERS as the Instruments to be active. In other words, you'll see in the Arrange page "Transformer #1, Transformer #2" instead of the actual instruments. This is so you can record through them, and then the VIs just playback the correct notes.'
I am not transformer savey However if you or anyone reading this could please send me a pic as to what the settings within the transformer should look like for both channels I would be grateful
The support I have had thus far on this topic has been more frustrating than help full. One experienced member admits that this is complicated not impossible.
I know through screen shots that the settings can be shown as this was what I saw in the original post to somebody else which drew me to pose my problem about transformer.
As before all I need is someone who knows Transformer and is confident in its workings. I have tried but I cannot make head nor tail it would be so much more easier if I could get help with this so then I would have a correct base for getting more confidence with tying other operations.
Cubase has a logical editor which works the same way I am coming from Cubase 3.1 from the Atari days and still I couldn't get my head around that and this was 1990. no matter how many books I read and believe me I have read quiet a few along with related manuals.
Are there any books or DVDs on the workings of Transformer or any templates.Hi Teebow,
Here's what you can do:
Go to your Environment Layer.
Go to the "Click & Ports" Layer.
Create 2 new transformer objects, from the menu inside the layer window (not the main menu, but the one inside the window)
Connect both of these between the INPUT object, and the Sequencer object.
Now... you need to take out a notepad, and write down some settings.
On the first transformer, you will make it FILTER out ANY MIDI from channel 2. and pass all else.
On the second transformer, you will ONLY ALLOW MIDI data coming in from channel 2, and NOT ALLOW anything else to pass.
Instead of trying to get you a screenshot, please just open the environment and create an EMPTY new Layer, and call it "practise layer" or the like.
There create some new transformer objects, and FAMILIARIZE yourself with them. then you will be "transformer savvy"
They are actually very very useful object for dealing and routing MIDI of all sorts. And since you are now needing this, it would behoove you to learn to use this feature of Logic.
And no, it is not that I do not want to post screenshots, I am actually quite busy, and it would take me longer to have you learn through the forum, than for you to just do it. you need to stop fearing the environment, that's all...
Cheers -
Read every font topic, but I still need help
I have been at this for about 4 hours, and I need help.
I read Flash Help and every font forum topic, which say
Static Text need not use embedded fonts.
Links to .fla and .swf files below.
Everything shows up fine in 'Control/Test Movie'
Using Arial font, I cannot see static text in my test .swf
file.
I then embedded Arial (24 pt, bold, italic - 'ArialEmbedded'
in the library).
Using that font on Static text, can see the text, but not in
Arial. It is in TimesNewRoman, regular, non-italic.
I then used the embedded font in text I described as dynamic,
but could not see any text.
Everything shows up fine in Control/Test Movie.
I get around this by building .gifs using graphics packages
and importing them,
but the results are less than desirable. (see layer ".gif
from outside appl."
Links:
http://www.ph4d.com/FlashFonts/TestingText3.fla,
and
http://www.ph4d.com/FlashFonts/TestingText3.swf
I hope it's something I overlooked, and I appreciate any help
provided.
Thanks,
vincegUpdate.....
I still cannot see text in .swf on my local machine, but I
can see it on the web, after posting it, but the text looks awful.
(The same text in Word lookas fine -
http://ph4d.com/FlashFonts/TestingText3.doc) -
Have I done this correct, but I still need help on #7
1. Provide a SQL statement that displays the FIRSTNAME and LASTNAME of each customer separated by a comma. The FIRSTNAME and LASTNAME should be capitalized and concatenated together with a column alias of “Full Name”. The output should be sorted in ascending order by LASTNAME.
SELECT FIRSTNAME||','||LASTNAME "FULL NAME"
FROM CUSTOMERS;
FULL NAME
BONITA,MORALES
RYAN,THOMPSON
LEILA,SMITH
THOMAS,PIERSON
CINDY,GIRARD
MESHIA,CRUZ
TAMMY,GIANA
KENNETH,JONES
JORGE,PEREZ
JAKE,LUCAS
REESE,MCGOVERN
WILLIAM,MCKENZIE
NICHOLAS,NGUYEN
JASMINE,LEE
FULL NAME
STEVE,SCHELL
MICHELL,DAUM
BECCA,NELSON
GREG,MONTIASA
JENNIFER,SMITH
KENNETH,FALAH
20 rows selected.
2. Provide a SQL statement that displays the current date in the format MM/DD/YY.
SELECT TO_CHAR( '10/25/06')
FROM DUAL
TO_CHAR(
10/25/06
3. Provide a SQL statement that displays the TITLE and publisher NAME of each book in the “COMPUTER” CATEGORY.
SELECT TITLE, CATEGORY
FROM BOOKS, PUBLISHER
WHERE CATEGORY = 'COMPUTER'
TITLE CATEGORY
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
TITLE CATEGORY
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
20 rows selected.
4. Provide a SQL statement that displays the CUSTOMER# and LASTNAME for each customer along with the ORDER# of any order that the customer placed. The statement should include all customers including those that have not placed any orders.
SELECT LASTNAME,ORDER#
FROM CUSTOMERS C, ORDERS O
WHERE C.CUSTOMER#=O.CUSTOMER#
ORDER BY O.ORDER#
LASTNAME ORDER#
GIRARD 1000
LUCAS 1001
MCGOVERN 1002
MORALES 1003
FALAH 1004
MONTIASA 1005
SMITH 1006
GIANA 1007
PIERSON 1008
GIRARD 1009
SMITH 1010
LUCAS 1011
NELSON 1012
LEE 1013
LASTNAME ORDER#
GIANA 1014
FALAH 1015
SMITH 1016
SCHELL 1017
MORALES 1018
MONTIASA 1019
JONES 1020
21 rows selected.
5. Provide a SQL statement that displays the total QUANTITY of books ordered.
SELECT CUSTOMER#, FIRSTNAME, LASTNAME
FROM ORDERS NATURAL JOIN ORDERITEMS NATURAL JOIN CUSTOMERS
HAVING SUM(QUANTITY)=ALL
(SELECT MAX(SUM(QUANTITY))
FROM ORDERS NATURAL JOIN ORDERITEMS GROUP BY CUSTOMER#)
GROUP BY CUSTOMER#, FIRSTNAME, LASTNAME;
CUSTOMER# FIRSTNAME LASTNAME
1007 TAMMY GIANA
6. Provide a SQL statement that displays the TITLE of all books that COST more than the average cost of all books.
SELECT TITLE,AVG(COST)
FROM BOOKS
GROUP BY TITLE
TITLE AVG(COST)
BIG BEAR AND LITTLE DOVE 5.32
BODYBUILD IN 10 MINUTES A DAY 18.75
BUILDING A CAR WITH TOOTHPICKS 37.8
COOKING WITH MUSHROOMS 12.5
DATABASE IMPLEMENTATION 31.4
E-BUSINESS THE EASY WAY 37.9
HANDCRANKED COMPUTERS 21.8
HOLY GRAIL OF ORACLE 47.25
HOW TO GET FASTER PIZZA 17.85
HOW TO MANAGE THE MANAGER 15.4
PAINLESS CHILD-REARING 48
REVENGE OF MICKEY 14.2
SHORTEST POEMS 21.85
THE WOK WAY TO COOK 19
14 rows selected.
7. Provide a SQL statement that displays each SHIPSTATE along with the number of orders shipped to each state. Include only those states that more than 3 orders were shipped to.
8. Provide a SQL statement that displays each book CATEGORY in the database. The category should only appear once in the output.
SELECT TITLE, CATEGORY
FROM BOOKS
TITLE CATEGORY
BODYBUILD IN 10 MINUTES A DAY FITNESS
REVENGE OF MICKEY FAMILY LIFE
BUILDING A CAR WITH TOOTHPICKS CHILDREN
DATABASE IMPLEMENTATION COMPUTER
COOKING WITH MUSHROOMS COOKING
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
PAINLESS CHILD-REARING FAMILY LIFE
THE WOK WAY TO COOK COOKING
BIG BEAR AND LITTLE DOVE CHILDREN
HOW TO GET FASTER PIZZA SELF HELP
HOW TO MANAGE THE MANAGER BUSINESS
SHORTEST POEMS LITERATURE
14 rows selected.3. Provide a SQL statement that displays the TITLE and publisher NAME of each book in the “COMPUTER” CATEGORY.
TITLE CATEGORY
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
TITLE CATEGORY
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
DATABASE IMPLEMENTATION COMPUTER
HOLY GRAIL OF ORACLE COMPUTER
HANDCRANKED COMPUTERS COMPUTER
E-BUSINESS THE EASY WAY COMPUTER
20 rows selected.
Result is wrong - you have a catrtesian product between books and publisher i.e. each book is repeated for each publisher. You need to join books to publisher and you need to select the publisher name
4. Provide a SQL statement that displays the CUSTOMER# and LASTNAME for each customer along with the ORDER# of any order that the customer placed. The statement should include all customers including those that have not placed any orders.
SELECT LASTNAME,ORDER#
FROM CUSTOMERS C, ORDERS O
WHERE C.CUSTOMER#=O.CUSTOMER#
ORDER BY O.ORDER#This is wrong, you need to use an outer join between customers and orders to satisfy the requirement:
The statement should include all customers including those that have not placed any orders.
5. Provide a SQL statement that displays the total QUANTITY of books ordered.
SELECT CUSTOMER#, FIRSTNAME, LASTNAME
FROM ORDERS NATURAL JOIN ORDERITEMS NATURAL JOIN CUSTOMERS
HAVING SUM(QUANTITY)=ALL
(SELECT MAX(SUM(QUANTITY))
FROM ORDERS NATURAL JOIN ORDERITEMS GROUP BY CUSTOMER#)
GROUP BY CUSTOMER#, FIRSTNAME, LASTNAME;
CUSTOMER# FIRSTNAME LASTNAME
1007 TAMMY GIANA
I can't see a quantity here and you should avoid NATURAL JOINs like the plague:
SELECT CUSTOMER#, FIRSTNAME, LASTNAME, SUM(QUANTITY)
I'm not exactly sure what you're attempting with the
HAVING SUM(QUANTITY)=ALL
(SELECT MAX(SUM(QUANTITY))
FROM ORDERS NATURAL JOIN ORDERITEMS GROUP BY CUSTOMER#)
GROUP BY CUSTOMER#, FIRSTNAME, LASTNAME;bit.
6. Provide a SQL statement that displays the TITLE of all books that COST more than the average cost of all books.
SELECT TITLE,AVG(COST)
FROM BOOKS
GROUP BY TITLEThis doesn't do what was asked, it just selects the average cost of each book - which will be exactly the same as the actual cost of each book. You need to use a sub query here.
8. Provide a SQL statement that displays each book CATEGORY in the database. The category should only appear once in the output.
The title does not need to be in the output here and you need to use distinct.
HTH
David -
Dashboard.app is giving me problems. it appears and disappears at will. I don't wan to disable it too. Help me out please
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
So I'm getting an iPhone c for Christmas and I wanted to know buy like a cover for it. You know how it has the rubber cover can I take it off and put on it a plastic one or whatever. Please answer me!!
I read your question as if you can remove the coloured back of iphone5c and put on another one
if so then no I believe the rubber ones with colours and holes I linked to can be switchted between but I don't believe the back coloured part of iphone5c comes off -
Thanx Noeqplease but I still need some help form U or anyone out there
Answer From Noeqplease
'Hi Teebow,
You need to set up a simple pair of transformers, in your audio Layer.
One transformer will feed MIDI channel 1, and one, MIDI channel 2, in your arrange page, for recording.
First, create a simple Environment Object, and call it whatever you like (key splitter is good). This is so you can send one midi stream ot both Transformers.
Cable this to the following two Transformers:
The first Transformer will FILTER all notes BELOW your set parameter, ie whatever note you decide. This is the TOP of the keyboard split. Hook this up to your first Audio Instrument channel. this would be the melody instrument.
The second transformer will FILTER all notes ABOVE your set parameter, ie whatever note you decide. this is the BOTTOM of the keyboard split.Hook this up to your second Audio Instrument channel. This would be the Bass instrument.
In the Arrange Page, create your two instruments, and then select the TRANSFORMERS as the Instruments to be active. In other words, you'll see in the Arrange page "Transformer #1, Transformer #2" instead of the actual instruments. This is so you can record through them, and then the VIs just playback the correct notes.
Cheers '
I am not transformer savey However if you or anyone reading this could please send me a pic as to what the settings within this beast should look like for both channels so that I can click an go thanxLogic can only show the parameters for one object at a time (the selected object) so a screenshot will do you no good, as it can't show all the parameters at once.
Have you tried working through this? Or did you just not understand it without trying? The instructions, while not explicit, are clear enough in principle. Work through it, and if there is anything you don't understand, post back for clarification. That way you might just become a little more environment savvy... -
Ipod 'fixed' but battery still doesn't work!!!
please help..
a few weeks ago i sent my ipod mini to apple to be fixed because i had problems with my battery. I charged it fully and then it ran out within 2 hours max and it showed the battery and ! icon. i tried loads of stuff they suggested on the website but eventually sent it off.
i recently got it back and nothing has been fixed. i still have the same problem. I don't know what to do!!?? my warranty only continues for 7 more days so i have to be quick! how do i get the whole ipod replaced?
windows xp Windows XP
windows xp Windows XPI guess your definition of "Fixed" is different from most peoples...
The iPhone is not user servicable. Now that you've attempted to repair it yourself, Apple won't touch it.
It's impossible to say what else might be broken, and since there are no legitimate sources for iPhone parts (Apple does not sell iPhone parts at all), you're going to have to either try looking for advice somewhere like ifixit.com, find a competent repair shop, or buy a new phone.
Had you not attempted to repair it yourself, you may very well have been able to get the phone replaced by Apple for $199. -
Video help STILL needed ¬_¬
I have the latest software. I have updated my Ipod and restored and all that kerfuffle and STILL my videos show up on my library but NOT on my ipod. Would some one like to help me please
Connect your ipod and go to edit-->preferences Hit
the iPod tab. Then hit the videos tab. What option is
checked?
btabz
when i do that for mine, all the options are shaded out, and it's on don't update video...is there a way that i can change it? i've tried clicking the other 2 options, but it won't let me change it
Windows 2000
Maybe you are looking for
-
I keep getting the -1 error when trying to restore?
So I'm trying to restore my iPhone 3GS but I keep getting the -1 error in iTunes. I have tried putting the iPhone in dfu mode but had no luck. Can anyone help?
-
Getdescrip​tionex not working in parallel proces model
Hi All, In parallel process model, I would like to get the description of the called step. So I make use of the function Runstate.CallingStep.GetDescriptionEx(0) in the ProcessModelPostStep sequence. TestStand is getting hanged once the con
-
Mapping Issue: Target IDoc structure not getting created properly
Hi Experts, I am stuck with a strange problem in my mapping. It is a M:N scenario mapping where we have multiple IDocs in source as well as in target. For example, in source Queue-1 I am getting values as [SUPPRESS, true, true, true, true] and in the
-
New Message Saved Multiple Times In Drafts Folder
I know that while I'm composing an email the program automatically saves a copy of that message to the drafts folder. This copy is updated while I'm composing the message. But recently, as I'm composing a message, the same composition is saved multip
-
Error using EPMA FileGenerator.
My problem is the following: When I open a File (EPMA FileGenerator) in Excel, it throws the following error. Compile Error in Handle Module: ImportsWorkBook..., with this error the user cannot generate his metadata to be imported to his application.