Self enrollment not working

So I'm trying MS Intune in a test environment and I can't figure out how to do Windows computer enrollment. I added users in the management portal, then I go to a user's computer, log in to the portal as a user, click the + Enroll Device, download the
software, and when it tries to install it says:
Not quite sure what I'm missing to be able to enroll systems. I tried to follow the instructions on the Intune portal and create a 'device enrollment profile' although for some reason it only seems to apply to iOS (?)

Are you trying to manage a Windows 8.1 system as a mobile device or as PC? Any version of Windows prior to Windows 8.1 cannot be managed as a mobile device. Installing the client software manages the device as a PC.
If you're trying to manage it as a PC try downloading the software from manage.microsoft.com and ensure the zip file contains the certificate file as it seems that's what the installer in your error message is looking for when it fails. The certificate
file is what tells the installer how to communicate with your Intune tenant.
Device Enrollment Profiles are only for use with iOS.
Can you please describe what you're trying to accomplish and perhaps I could be of further assistance.
Thanks!
Paul Goodson
Senior Program Manager
Microsoft Intune Customer Acceleration Team

Similar Messages

SMD and Self diagnosis not working

Hi Solman's,
I put my system to Stack 12. After that, SMD and Self Diagnosis not working any more. Here the message:
URL http://sv030488.myco-group.com:8001/sap/bc/webdynpro/sap/dswp_sd_self_diagnosis call was terminated because the corresponding service is not available.
Note
The termination occurred in system MMS with error code 403 and for the reason Forbidden.
SM59 connection test shows:
ERROR: program WEBADMIN not registered
how to register ??
Best regards
Wolfgang

Hello Wolfgang,
You have to activate the service dswp_sd_self_diagnosis.
Run transaction SICF, on Service Name, enter dswp_sd_self_diagnosis.
Right-click on the service and select "Activate Service".
Run the Setup Wizard of Diagnostics System on SMD to register the program WEBADMIN.
Best regards,
Paula

Self-Registration not working in EP7 SP13

Hi Experts,
i am using EP7 with SP13, in this i have enabled self registration link in my logon page. When i click on this link it shows registration page, after entering all required information and submit it. Showing message like this
The requested page has been replaced by the new Web Dynpro based administration. Please refer to SAP Note 869852 if you want to use the old administration UI. Click on the following link to access the new administration screen: /useradmin
I followed this SAP Note 869852. they guide us to enable to old UME UIs. then it will work. so develop cant use the new UME WD UIs.
is any other way to fix the issue, doing the self registration in new UME WD UI itself?
please guide me through this..
Regards,
Kumar

Hi Kumar,
If switching back to the HTMLB UIs works for you, first I would like to say: Congratulations. No, really, I don't know anybody who really prefers the WD UI.
Nevertheless, I don't see why using the WD UI should stop someone from using the self registration. This /might/ be a bug, misinterpreting the situation, that the UME UI is needed (which is should not after filling in the self registration form). So, you should consider to open an OSS message about it to get a clarification on this. As SAP provides the new UIs as the new standard, I cannot imagine that they wanted to cut of the self registration functionality when using the new standard...
Hope it helps
Detlev

Selfie camera not working passport

Hi all. I have searched the forum for camera freezes and read all posts and fixes that were posted. . My camera worked fine untill latest update from Telus I downloaded 5 days ago. I have wiped the passport clean, hard started it, restarted it and I can not switch to take a Selfie pic. Taking pics through the back of the phone is fine. No problems. As soon as I try to switch camera direction it freezes. Please help. What am I doing wrong

Hmmm I guessed as much, cheers bud.

Self.Close() not working in iOS8

Self.Close() is not closing window tab on call

Look at the top right of this page at the 'Breadcrumb' trail
Apple Support Communities / iPad / Using iPad
You are there.

Emailing OTP for enrolment not working

Hey guys,
i must be missing something.
local ca on cisco asa 5505 configured and working, however email otp function is unable to deliver email to clients.
i tracked this in the mail logs and i get all mails being rejected with "bugs HELO name used: F1"
shoot me i can't find what i am missing and how to make cisco asa to use a proper smtp helo with host name. cisco asa has a host name that is fully qualified and resolves.
any hints will be apreciated.

there seems to be no answer to this.... i could not find how to make cisco asa device to greet mail server with FQDN. had to make a tweak to my mail server to allow IP asa owns to skip helo checks and accept emails.
isn't this an obvious thing these days (fqdn on helo during smtp trasaction)? I find this hard to believe that cisco asa 8.2.1 version does not know how to properly talk to mail servers.
anyway the work around in place on my end. however would be interesting to see some cisco tech confirm is this is a bug in 8.2.1 or is this what it is and asa will always greet with some bugs non fqdn.

Mac Client Enrollment Not Working

I'm trying to enroll a MAC OSX 10.9.2 client. My environment is Server 2012 R2 and Configuration Manager 2012 R2. I get the following error when running the CMEnroll command:
SSL Connection failed. HTTP Response code is 500 and reason is Internal Server Error
Server returned: CertificateRequest Error
These are the errors from the EnrollmentService.log
[3, PID:3596][03/07/2014 12:23:52] :CALayer: Sending CA failure status - ENROLLSRVMSG_CA_FAILURE
[3, PID:3596][03/07/2014 12:23:52] :CALayer: SubmitRequest CA: cauthority.ctl.intranet\CTL Prod Issuing CA Errormessage: Denied by Policy Module 2 ErrorCode: 2
[3, PID:3596][03/07/2014 12:23:52] :Only one CA is specified in profile. Failed to enroll with the specified CA: cauthority.ctl.intranet\CTL Prod Issuing CA
[3, PID:3596][03/07/2014 12:23:52] :EnrollmentRequestController: Enrollment exception Error Code:FailedToIssueCert Message: Submitting cert request and issuing cert failed
[3, PID:3596][03/07/2014 12:23:52] :Microsoft.ConfigurationManagement.Enrollment.EnrollmentServerException: Submitting cert request and issuing cert failed
[3, PID:3596][03/07/2014 12:23:52] :FaultCode is: CertificateRequest and reason is: Failed certificate operations FailedToIssueCert
Does anyone know what's going on?

Hi,
The failed requests on the CA might give you some useful information. And here is a similar thread with yours:
http://social.technet.microsoft.com/Forums/en-US/142fc77d-4eed-4f3a-a57c-dcacf8cbbf63/sccm-2012-sp1-mac-client-enroll-problem?forum=configmanagergeneral
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Self LTC not working

HI sap experts,
Please guide to maintain LTC for self through portal , where is it configured let me know
Path :ESS> Payment> Reimbursement Module (Java)
Employee Number 300 in QLT 456
IT0589 is maintained.
Error while creating LTA claim for self.
Regards,
Prasad

check the configurations in below tables for LTC schema settings.
V_T77WWW_CLLTCSC
V_T77WWW_CLMLSEL

GetURL("javascript:self.close()"); not working

I've noticed my popups containing swfs don't close any longer
when I publish in flash 8 Is there a problem with the
getURL("javascript:self.close()"); command?

check the topic "pop up window", posted on 25-3-08
I hope this helps
Martin

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Self Registration and Attestation is not working in OIM 9.1.0.4

Hi,
i have setup a new OIM environment using OC4J. I am able to create users and provision IT resource but self registration and attestation is not working. not sure it is OC4J issue or OIM issue. For self registration it says request is submitted but when I login as xelsysadm and dlon't see any pending request and same thing happens for attestation. It dowsn't display any error but never gets completed and don't see this also in pending request list. If anybody has idea to debug the issue then let me know and thanks for help.
Thanks,
HC

As per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder

Aggregator V.5 self paced learning not working

. I have 11 individual projects that I have combined into one aggregated file. When I run the aggregated file, the self-paced learning is not working correctly. Here is what I know:
Captivate 5, WIN 7, Chrome browser. Clients choice of Captivate version.
Client is not using a LMS
All 11 projects have the “self-paced learning” checked in the TOC.
I have published all 11 projects and they run fine. I can exit the browser while they are running and restart each project. The box displays, “Continue from where you stopped last time?” and I can either resume or start over.
For each of the 11 projects, here are some settings:
In >File>Publish settings>Project>Start end> Autoloader is checked
In >File>Publish settings>Project>Start end> Autoplay is checked
In >File>Publish> eLearning output=disabled
In >File>Publish>ActionScript Version=AS3
I have republished all individual projects, and also checking the “Force republish all the slides”.
Cleared the browser cache
All 11 individual projects (.swf and .html), the .js file as well as the aggregated file(s) (.swf and .html) are all located in the same folder on my hard drive. They are close to the top of the naming hierarchy.
Client wants to be able to use self-paced learning in the Aggregated files to allow the learner to resume where they left off as well as starting over. I start the aggregated file, let the slides run for a bit and then stop, exiting the browser. I return to the location on my hard drive and click the .html file name. I am returned to the aggregated file at the very beginning and not given the option to start where I left off. I have checked each of the projects persistanceInfo.sol. Among the oddball characters, the wording "don'task" appears, but I am not sure if some of the characters are indicative of the "Don't ask" box being checked or not. I have reviewed each of the projects in the aggregated file. On each and every occasion, when I close and reclick the link, I am presented with the dialog box asking if I want to continue where I left off. Clicking ok allows the project to resume where I left off. Clicking cancel restarts the project at the beginning.
Additionally, I have made sure that the target file location is listed on the Global Flash Security settings as a trusted location.I have uploaded the files to a web server on our company site. Running the file from there provides no additional benefit-I get the same results.
Thoughts?
Thanks
Jim

All slides in the presentation are marked as continue. I have gone
through the first 5 slides and when I refresh the browser or exit out of
Internet Explorer and open the project again it just starts at the
beginning.
Brenda
From:   Lilybiri <[email protected]>
To:     Brenda Dersham <[email protected]>
Date:   01/25/2011 08:33 AM
Subject:        Self-Paced Learning - Bookmark not
working in Captivate 5
Hello Brenda,
How did you check: after uploading to a LMS?
You have to be aware of the fact that a slide will be marked as 'viewed'
only when the playbar has played the whole slide till the end. If you do
pause slides with a click box, button, TEB and attach the action 'Go to
Next slide' or something similar instead of the default action 'Continue'
this will not happen and the slide will not be marked as completed.
Lilybiri

WSUS "Self-update is not working" after new certificate

After creating a new self-signed certificate in SBS 2008 wizard we get the following error:
Text: Self-update is not working
Source: Windows Server Update Service
Event id: 13042
I know that it must be something simple. But I can not find the solution.
Can anyone help me with this problem?
Thanks

Hi,
Based on your description and this error message, this issue may be caused by:
The Default Web Site is not running and/or has a site binding for SSL (HTTPS).
The Selfupdate virtual directory has the "Require SSL" checked under the SSL settings.
For more details, please refer to the following KB and check if can help you to solve this issue.
WSUS 3.0 Self-update is not working on Windows Small Business
Server and Event ID 13042 is generated
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

ISE upgrade 1.2: Self-provisioning portal not working

Hi all,
I need help with Self-Provisioning portal flow not showing the agent installation page after upgrade from 1.1.1 to 1.2 on a couple of 3315. I've configured all the pieces as instructed by BYOD SBA guide at http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_SLN_BYOD_InternalCorporateAccessDeploymentGuide-Feb2013.pdf
Screenshot of page is attached:
I've checked ise-console.log application log file and found two errors correponding to the first page:
[portal-http-84431][] SystemConsole -::c0a8a82a000000d7523c70f9::guest:- com.cisco.cpm.provisioning.exception.ProvisioningException: java.security.cert.CertificateException: Unable to initialize, java.io.IOException: DerInputStream.getLength(): lengthTag=127, too big.
[portal-http-84431][] SystemConsole -::c0a8a82a000000d7523c70f9::guest:- at com.cisco.cpm.provisioning.cert.CertProvisioningFactory.initialize(CertProvisioningFactory.java:333)
and the second (not working) one:
[portal-http-84431][] SystemConsole -:xxxxx@xxxxxxx:c0a8a82a000000d7523c70f9::guest:- java.lang.NullPointerException
[portal-http-84431][] SystemConsole -:xxxxx@xxxxxxx:c0a8a82a000000d7523c70f9::guest:- at com.cisco.cpm.provisioning.cache.FlowStateCacheManager.getFlowStateCache(FlowStateCacheManager.java:202)
Looks like something is wrong with a certification file, but I cannot find what is. I've exported and re-installed current server certificates (as instructed by upgrade guide for 1.2) and nothing changed.
Can somebody please help?
Thanks,
L

Errors When Adding Devices to My Devices Portal
Employees cannot add a device that is already added if another employee has previously added the device so that it already exists in the Cisco ISE endpoints database.
If employees are attempting to add a device that supports a native supplicant, recommend that they use that instead. That registration process will overwrite the original registration and switch ownership to the new user.
If the device is a MAC Authentication Bypass (MAB) device, such as a printer, then you must resolve ownership of the device, and if appropriate, remove the device from the endpoints database so that the new owner can successfully add the device.
For more information on self-provisioning.
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mydevices.html Errors When Adding Devices to My Devices Portal
Employees cannot add a device that is already added if another employee has previously added the device so that it already exists in the Cisco ISE endpoints database.
If employees are attempting to add a device that supports a native supplicant, recommend that they use that instead. That registration process will overwrite the original registration and switch ownership to the new user.
If the device is a MAC Authentication Bypass (MAB) device, such as a printer, then you must resolve ownership of the device, and if appropriate, remove the device from the endpoints database so that the new owner can successfully add the device.
For more information on self-provisioning.
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mydevices.html

Hyperlink text will not work with _self, only as self and then creates window

I understand that the code below should work but it doesn't, I have to take the underline before self out, for the hyperlink to work at all, and then it creates another window for the file. There may some sort of glitch that I am not aware of. But the code below does not work as is in my app. Any further suggestions?
var t:TextField = new TextField();
t.htmlText = "hello world"+ "<a href='weeTestPage.html' target='_self'><u>click here</u></a>";
t.autoSize=TextFieldAutoSize.LEFT;
addChild(t);

You are asking second time same question. (http://forums.adobe.com/message/3401366?tstart=0#3401366)
I answered the first one.
Haven't you read it?

Self enrollment not working

Similar Messages

Maybe you are looking for