Self Load into infocube of a specific request

Hi all
I have to do a self load on a infocube, Can do load only for specific request?
For ex: Infocube->Manage->Requests I see 4 Requests, can I pick only one request out of those 4 and do a self load into infocube for that one request?

Hi,
Please do a fetched run in the DTP(i hope the option will get enabled for delta DTP) and reset the datamart status only for that particular request in the source which you need to load. Try loading it again?
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
Regards,
Syed
Edited by: shameer83in on Dec 2, 2011 7:56 AM

Similar Messages

Request status is Green,But no data is loaded into infocube.

Hi,
I have loaded the data from Flat File to Infocube. The status of the request is Green. But no records are added into infocube.
The data is available in PSA.

Hi Jen,
I had created DTP and scheduled it. There shows a request in infocube with status green but no records added.
I have checked in PSA , the data is present in PSA.
I am wondering why data is not uploaded from PSA to Infocube.

Data Loading into Infocube from ECC.

Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!

The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information.

Data load into InfoCube

Hi,
I am trying to load data from DSO to InfoCube. I am not able to see the data into InfoCube.
Details: Intially data was present in InfoCube, i have made some changes into InfoCube(added some Nav attr) and activated the InfoCube. when i load data from DSO into InfoCube, i am not able to see the data. In monitor tab, i can see that 107 records updated into InfoCube. status is green. i checked the load using debugging mode, data is present till 'After the Transformation'. but could n't see the data therafter (while updating in cube). if i see the contents of InfoCube, there are 107 rows but all with blank values.
Could you please let me know how to fix this problem.
Thanks in advance.
Best Regards,
Liyakath.

You may have to dump all the data in your cube and reload it from the DSO

Uknown Error in update rules while loading into InfoCube

I load data from BC 0FIAR_O03 ODS into BC 0FIAR_C03 ICube.
While loading I got error on second data package (1st package loading ok)
The error message in monitor informs about error in update rules.
I got nothing special than I looked into Application Logs (tcode SM21). It tells about message 560 with addition "no documentation exists for message 00560"...
I can't get what's wrong. The update rules for ICube is BC without any modifications and data loaded succefully into ODS.... Any ideas?? Where I can find more inforamtion about error occured during update??

update rule terminated if data load contains more than 1 data package. don't know why. I solved problem by spliting load process by Fiscal Year ranges

Total number of records loaded into ODS and in case of Infocube

hai
i loaded some datarecords from Oracle SS in ODS and Infocube.
My SOurceSytem guy given some datarecords by his selection at Oracle source system side.
how can i see that 'how many data records are loaded into ODS and Infocube'.
i can check in monitor , but that not correct(becz i loaded second , third time by giving the ignore duplicate records). So i think in monitor , i wont get the correct number of datarecords loaded in case of ODS and Infocube.
So is there any transaction code or something to find number records loaded in case of ODS and Infocube .
ps tell me
i ll assing the points
bye
rizwan

HAI
I went into ODS manage and see the 'transferred' and 'added' data records .Both are same .
But when i total the added data records then it comes 147737.
But when i check in active table(BIC/A(odsname)00 then toal number of entries come 1,37,738
why it is coming like that difference.......
And in case of infocube , how can i find total number of records loaded into Infocube.(not in infocube).
Like any table for fact table and dimension tables.
pls tell me
txs
rizwan

Request is successfully but datarecords are not loaded into the InfoCube

Hai
Im loading the data into the 0PUR_C01 from the two datasources 2LIS_02_ITM and 2LIS_02_SCL.
First im trying to load the data from the 2LIS_02_ITM int the InfoCube 0PUR_C01.
Then request is loaded successfully and im getting the reporting symbol in the 'Manage' of the InfoCube.But
Transffferd Records = 22000
Added Records = 0
why it is like that ..
pls tell me i ll assing the points
Mubeen

Hi,
Problem becasue of missing Industory sector setting in R/3 . This setting has to be done before filling the setuptable .For more information search the forums with BF11.
Re: 0PUR_C01
Re: Not getting data added to IC for 2LIS_12_VCITM
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

DTP: How to load a specific request?

I have created a DTP between two InfoCube objects. I would like to perform full loads of only a few selected requests from the source InfoCube.
I couldn't find the request number field in the DTP filter list. How can I accomplish my requirement?
Thank you for your time.

You cannot send request vise data.
Experts correct me if I am wrong.
Message was edited by:
Jr Roberto

Problem in loading the data into Infocube. 3.5 BW

Performed full load to Infocube but unable to get total records. For example from 1000 records got 990 records. In PSA it shows 1000 records. Request has performed no-errors.
Thanks in advance.

Hi Ahmed,
Infocube stores data in aggregated level, which means the key figures will be summed up instead of overwriting. The same property can be checked in your transformation rule types and make sure that the Aggregation Type is "Summation' and not "Overwrite". Please check for the summation of any one of your keyfigures and compare the same with that of PSA's Sum. If you find any difference then try to filter out records with smaller selections so that you can identify where the data is incorrect. Then probably you can take some corrective actions accordingly.
Regards,
Banu.

Help with AS3, loading multiple files into a movieclip in specific order in scrollbar

Hello! I am in need of some advice. We are trying to build a site with these features:
Our site will be built in Actionscript 3.
1. A navigation menu that, when a button is clicked, will scroll the site quickly to a specific Y position using swfaddress.
2. The entire site is controlled by a flash scroll bar, which will be scrolling a single movieclip.
    2A. The movieclip will load content corresponding to the navigation categories, all which is organized into zipped files (using this to extract the contents of each section, example: about.zip for the about         section of the site)
    2B. The movieclip will load multiple zipped files one by one that correspond to the navigation, in order, making the site appear to be very tall.
**What we are in need of is understanding how to load multiple zipped files into a movie clip, in a specific order, and having them scroll between one another through the navigation. The separate navigation categories can be in movieclips instead of zipped files if that is easier.
Here is a reference of something that works like this: http://swfc-shanghai.com/#/about/

Hello kglad! I have set aside the idea of using zipped files, and am now just using multiple external swfs that I'd like to load into the movieclip in a specific order. Any thoughts?
I'm new to AS3, and I'm attempting to create a scrolling movieclip that will load multiple external files, in order, into that movieclip. I'm using XML as well. At this point, nothing is loading into my movieclip (contentMain) and it's a bit frustrating! Thank you for your help!
Current error: 1180: Call to a possibly undefined method load.
AS3:
//XML Loader
var myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.load ("master.xml");
myXML.onLoad =function(sucess) {
   if (sucess) {
contentMain.loadAll();{
     load("1_Overview.swf")
     load("2_Webcam.swf")
     load("3_Twounion.swf")
     load("4_Oneunion.swf")
     load("5_Retail.swf")
     load("6_Nearby.swf")
     load("7_Courtyard.swf")
     load("8_Map.swf")
     load("9_Conference.swf")
     load("10_News.swf")
     load("11_Sustainability.swf")
     load("12_Contact.swf")
addEventListener("complete",onLoad)
onLoad();{
//load all
     }else {
         trace("ERROR LOADING XML");

How to loading the opening stock balance into Infocube 0IC_C03

Dear Expers,
I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
(1)original text:
Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
(see screenshot).
Question:
How to find option that upload mode u201CCreate opening balanceu201D?
i'm use to customize infopackage. i can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
(2) I actived BI Contnet (0IC_C03), I seen that the data flow as following:
Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
Quesiton: I donu2019t know whatu2019s version, neither like BW 7.X nor like BW 3.X,
Why have infosource in BW 7.X, how to use infosource load data to target?
Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
Do I need to create a customize ODS?
Thank you very much , if you will answer me above two questions.
Best Regards
Steve

>
stevezhuang wrote:
> Dear Expers,
>
> I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
>
> Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
>
> (1)original text:
> Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
> 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
> (see screenshot).
>
> Question:
> How to find option that upload mode u201CCreate opening balanceu201D?
> i'm use to customize infopackage. i can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
>
>
>
> (2) I actived BI Contnet (0IC_C03), I seen that the data flow as following:
> Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
>
> Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
>
> Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
>
> Quesiton: I donu2019t know whatu2019s version, neither like BW 7.X nor like BW 3.X,
> Why have infosource in BW 7.X, how to use infosource load data to target?
> Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
> Do I need to create a customize ODS?
>
>
> Thank you very much , if you will answer me above two questions.
>
>
> Best Regards
> Steve
You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
This loading will create your Opening Balance.
you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
Regards,
RK

Load data into infocube

hello can anybody please say me how to load data into infocube in bw7.0
thanks a lot
komal.

Hi,
These are the steps for creating an Info cube and data loading
1. It is same as creating an Info cube in BW 3.5
2. Here once u created an info cube,assign dimesions to it.
3. Create application component, info source similar to BW 3.5.
4. After creating info source, right click on it
5. Here all the dimensions and key figures are mapped automatically in transformation rules.
6. Right click on info cube find the option : Create Data transfer Process
7. create an info package, as usual and schedule the package to load the data into an Info provider.

Delta Load to Infocube

Hi,
I am facing an issue with delta load to infocube.
Let me give you the scenaario - I have a standard Infocube and a DSO.
Data gets loaded to the infocube daily using Delta with filter on sy-datum.
There a new Key figure which is added as part of the DSO and Infocube recently.
Our requirement is - we have to populate history for that specific key figure in the DSO and subsequently to the Cube whithout any data duplication for already existing Key figures.
Hence, we have created a self loop on the DSO updating only the specific key figure.
Before loading the data into the DSO, while setting the already existing DTP which takes sy-datum is filter to " Initial Update Set".
Its giving an error which says "Overlapping Selection criteria for DTP".
Is it something like we cannot change the setting of an already existing DTP?
If i do a full data will get duplicated for the past dates, hence delta is the only solution.
But how to go about delta then?

Jaya,
If i understand corrctly..... Data getting loaded from DSO to CUBE through delta with some selection. New keyfigure added to DSO & CUBE ... right...??
To populate new KF, self loop created(DSO --> DSO) with required mappings(keyfields and new KF).
Just do full load from DSO --> DSO and push delta to cube. No need to keep any filters while loading from DSO to DSO. Populate new KF for entire data, and while pushing to cube filter is already available at DTP(use exising delta mechanism only from DSO to CUBE). No need of any full load from DSO to CUBE.
Hope it Helps
Srini

Self Load into infocube of a specific request

Similar Messages

Maybe you are looking for