Self ping test

Hi
In component monitoring under self ping test we see a tab that says Has an Integration server destination been defined ? What is the destination for the IS mentioned here ? Is it same as HTTP destination ? Or is the pipeline url being mentioned here ?
Midhun

Hi Midhun
In component monitoring you can see your server domain. Under that
Integration server
integration engines
Non - central adapter engines
J2SE adapter
Tools
Self ping test works for selected components
Now Is a Destination Defined for the Integration Server?
This test is only performed for ABAP proxy systems, not for the Integration Engine of the Integration Server. This test checks whether a destination is defined for the Integration Server. You configure this destination manually for the local Integration Engine using transaction SXMB_ADM
Thanks
Gaurav

Similar Messages

My computer is slow on the internet and even stops at times, i have 98mbps to the modem but only 20 mbps and sometimes less on a ping test- what is wrong? i am using a wireless connection do i need to upgrade my wireless modem in the mac?

my computer is very slow I have 98mbps to the modem but when i run a ping test on the machine i get 20 mbps and sometimes it is .10 mbps- do i need to upgrade my wireless modem on the machine? what can i do?

used speed test and got 20 mbps, tested the modem and got the 98mbps...something weird as my system just stops and will not load to sites like google and yahoo but will always respond to sites like CNN...does this mean anything?

Occasionally got 'Request timed out' when trying to do Ping test on the server. What likely will be the cause?

I want to troubleshoot what causing the connection unstable between workstation and server. When i try do the ping test, the reply sometime 'Request timed out' Any idea what likely the cause of this issue?
I tried change network adapter, change network cable, change network port, reassign different ip address to the server. Still the result remain. I got another server on the same rack and same ip segment(base), but the other server is ok.
Any idea on this guys?
Thanks.

Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Ping test failure

Hi, I'm a first time poster. forgive my naiveté on networking issues. I am having trouble connecting the apps 1Password, logitech TouchMouse, and AirVideoFree over WiFi to my Macbook. My iPhone is recognized by my computer over wifi, but the connection is not being made. I have the Firewall OFF, and I have all the proper 3rd party software running. I am at home, and I am sure that the Macbook and iPhone are on the same network.
I tried to do a Ping test with the following results.
Ping has started…
PING xxx.xxx.x.x (xxx.xxx.x.x): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
--- xxx.xxx.x.x ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
does anyone know how to fix this? I tried resetting my iPhone network settings and still get nowhere...
Please advise me.

Don't worry about connection tests that fail! It is more important to try SAP iViews that makes use of the connection... If they work, who cares that the test fails?
Cheers

Ping test keep dropping any advice

Hi,
I had this problem 3 weeks agos, now every night from 8pm - 12pm very unstable other time the connection is fine no problem.
i run ping test (from a cable connection) and it keep dropping, i sent 100 ping test to www.google.com -n 100 i get 3% loss which make my game play very unstable and unplayable.
i've try all sort of things unplug tv box disconnect all laptop disable wireless and test and still dropping.
also called Bt many time and done.
many times, speed test, line test, noise test replaced my Home hub twice and i still having same problem.
it was fine anytime other than from 8pm - 12pm
this very frastrate me because if is work fine on other time that mean there are no problem with my equipment and my
setup i dont have anything install or turn on practically on that time of night.
i suspect someone is running a or business on our block make big amount of traffic causes my unstable connection.
any advices ?
thanks,

in order for the forum members to help please can you post the adsl stats from your router unless HH4 may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results .
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Ping test in Java

Hello everyone!
Is there a way that I can call a "ping" test from a java program and catch the results? I basically want to right a program that runs through an entire list of IP addresses and verify whether I can talk to those devices or not. I know how to create the variables and display them, I'm just not sure how to actually perform the actual "ping".
Thanks!

I had the same problem a few months ago when I had had to write a network performance monitor.
I ended up with the following code:
     try {
     Runtime r = Runtime.getRuntime();
     Process p = r.exec("ping 172.20.1.2 -n 1");
     BufferedReader in = new BufferedReader(new InputStreamReader(p.getInputStream()));
     // Insert some code here to read and parse the returned string...
     catch (IOException e) {
     e.printStackTrace();
If you like I could mail you the entire code.
Andy.

Ping Test

Can your wireless router do a ping test to 66.161.11.90 (www.linksys.com) or any other www.com for that matter?
Mine can't, either with my wireless PB G4 running OS X 10.4 or wired Dell running Windows XP. I tried it with a wrt54g v5 & wrt54g v6 both tests got a 'request timed out' with 100% packet loss. v5 had the latest firmware, v6 is still at 1.00.9

hi you can do your ping test here whoisxy.com here they provide you good results .i test my ping here
my results are
Pinging cooltamil.com [64.64.4.118] with 32 bytes of data:
Reply from 64.64.4.118: bytes=32 time=51ms TTL=52
Reply from 64.64.4.118: bytes=32 time=51ms TTL=52
Reply from 64.64.4.118: bytes=32 time=53ms TTL=52
Reply from 64.64.4.118: bytes=32 time=51ms TTL=52
Ping statistics for 64.64.4.118:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 51ms, Maximum = 53ms, Average = 51ms

Ping test returns "test failed" on some computers on Ethernet network

When I test for connectivity ( 192.168.1.1 / My Network / device information / ping test / test connectivity ) "test failed" is returned from some, but not all, computers on my wired Ethernet network. Having worked with computers for many years I have tried all fixes that I know of without any success. Please help!!!!

#1 What software firewall is on your comptuer(s)?
Since you may have more than one computer, please tell me all of the software firewalls that are installed on your different computers.
#2 What is the brand and model of your router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

BT Performance Ping Test speed way out.

Anyone know why the BT Performance ping test is way out compared to other test tools?
When I run the performance test, BT's ping test returns 'speeds' of over 100ms (yes, that'sone hundred ms). Yet if I perform similar tests under the same conditions ie literally seconds later, using different tools such as Speedtest.net, Im getting pings of 20 - 32ms. Go back to BT Performance test and ping is still in the range of 100ms.
Ive even done ping tests using servers nearly 150 miles from home and even they return pings of less than 30ms!
Why the massive difference? Why is BT's ping taking on average 100ms. Do they use a London server or something?

Hi curiousfellow,
Thanks for posting. Can you post the results you're getting from the different servers and we'll take a look at them for you.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Trying to do a Ping test but getting no packet los...

Hi World,
A bit of a Newbie so please bear with me,
Currently been with infinity for about 5 months loving the speed and the wifi bit but as I am a hardcore Xbox 360 online gamer I have been noticing a lot of lag and rubber banding on numerous games since my router was swapped last month.
I have gone to speedtest.net and my download/upload spped is fine, but when I test my ping via pingtest I am getting a B result saying that online games speed wiil suffer secondly I am not getting and packet loss stats I just get a red box with a message saying none were sent or recieved?
The whole idea in getting Infinity was to get a secure and steady speed, but comparing my results with other ISP's who are on a lower speed the packet loss stats are fine, when i was sold Infinity I was assured i would not have to test my Ping as it would be fine so have only just started testing so cannot compare to my original router!
Help please as I don't want to pay off my contract with BT and go elsewhere......
Solved!
Go to Solution.

Hi
I would certainly be worried about your packet loss... and perhaps the latency introduced because of it.
Dean a BT Forum Mod posted HERE that the interleaving is automatic "it will only get switched on if the line is unstable however once the line has re-stabilised the DLM usually sorts it out relatively quickly"
I've recently had the White Openreach Modem replaced and thankfully not noticed any change... It's still wall mounted to enable the cooling vents to work correctly. Ping result below.
If your testing when wireless, I wonder if your starting to see noise/interference probs... neighbour's strong signal coming up on your channel or next to? Inssider is a good free PC wireless scanner (Video of version 1)
Inssider will help you choose a less congested channel to move your HH3 from in advanced wireless settings... from Automatic to a specific wireless channel number.
Or maybe interference from Christmas lights.... If that's the case then just try moving the HH3 to different channels and see how it goes.
I bet your going to say "I'm a gamer and need fastest/best connection so use a wired" then all the above wireless stuff is a bit redundant.
Then run the BT FTTC part of speedtest http://www.speedtester.bt.com/ and see if your IP has dropped.... If it has then that could indicate the exchange equipment has noticed a problem on your line and reduced it's settings to try and deliver a reliable broadband connection.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Certificate error with self signed test certficiate

When I go to my test instance via IE I get "Invalid Certificate - Certificate cannot be trusted up to a valid Certificate Authority".
I've followed all steps I believe are necessary and there are no errors in the logs. These were my steps:
java -cp weblogic.jar utils.CertGen maximo mycert mykey -cn mytest.local// convert CertGenCA cert to PEM format
java utils.der2pem CertGenCA.der// on windows concatenate my test certificate and CA cert
copy mycert.pem+CertGenCA.pem newcerts.pem// import it
java -cp weblogic.jar utils.ImportPrivateKey mykeystore mypasswd mykey password newcerts.pem mykey.pemI have then updated the weblogic server instance to use mykeystore as the Custom Identity Keystore and Custom Trust Keystore. They import successfully and if I check what's in them I can see both the key and CA certificate.
What am I doing wrong?
Thanks,
Matt

The issue is that IE does not trust the CA that signed your SSL certificate. If you are trying to eliminate the certificate warning in IE when navigating to your site via HTTPS then you need to add your CA certificate as a trusted authority in IE so that IE can validate the chain of trust that built your self-signed cert. You can import your CA cert into the IE trusted list by simply putting the CA cert on your desktop and double clicking it. This will launch a window allowing you to install the certificate. You will need to restart IE after you have successfully installed your CA cert. Don't forget to install any intermediate certs as well (if you happened to create any)

Error: Read failure when running any of self diagnostisc tests from BIOS

After Screen replacement my HP625 Laptop seems to work good as ever, but if running any of diagnostic test from BIOS (Memory, Start Up, Run In or Hard Drive Test) it throws the same Error: Read failure?!?
Should I be worried?
is is something wrong with testing software?
kind regards

Hi Arturb,
Your HP 625 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

No internet access..connected to router fine, did ping tests, still no internet

I am trying to get my pc running windows xp connected to the wireless network. I've gone through all the troubleshooting I can find on the connection. All the trouble shooting shows that the connections are fine, yet going into explorer I get a message that there is no internet connection. Very, very frustrated. Help.

You didn't give a lot of information to go on.
What did you ping? Did it complete or not?
Does your PC get a 192.168.1.x IP address, or does it get a 169.254.x.x. address?
Can you ping the router?
Can you login to the router?
If so, what is the status of your WAN connection on the main status page?
Have you tried a wired connection?
Post the results of a traceroute to google.com

Self Assestment Test

Dear Expert,
we need to have online test in sap netweaver portal (ESs/mss). What is the best way to do this? The idea is employee login to ess, and take the test (like GIA or DISC) and we need to store the test result in ztable for futher processing. can we user hcm P&F or webdynpro? we dont use LSO. Thanks

P & F makes sense to use when you are update information in infotype
I would suggest you to go with Webdynpro Option
Thanks
RAjdeep

Security update: ping testing. VNC stopped working...Wierd

Have a HTPC off of my router that I use VNC with to control with my mac. Everything was fine until I installed the latest security update (or around this time)
I can file share with the HTPC and everything shows up in Finder. But I cannot get VNC to work now. Nor can I ping the HTPC. I have tried opening ports on my router, even as far as reseting the router to factory. Still no workie workie.
I am stuck. I dont know where or what to do.

Hi Shaon,
Thanks for your reply. I've looked into what you suggested. The DFS Replication service was set to run as Local System Account and I can confirm the "Allow service to interact with desktop" tickbox was not ticked.
Just to make sure, I changed the logon account, restarted the service and then put it back to local system account on each partner and domain controller. Unfortunately, this doesn't appear to have fixed the problem.
I've checked the logs on each machine and can't see any new errors.
As I was getting an 'access denied' I did read somewhere that the domain administrator account should be part of the administrator's group on each machine. Previously the group had the following members:
Administrator
(domain)\Domain Admins
I've added the domain administrator account to that list. Initially, the access denied message disappeared, but came back a few minutes later when I went back into the DFS console.
Let me know if there's anything else to try. I'll keep digging my end. Just to give you some more info, all machines involved are running Windows Server 2008 R2 and are fully patched.
Thanks again.
Mark

Self ping test

Similar Messages

Maybe you are looking for