Self Service Purchasing 5 and Win XP Pro

Hi,
Just like to ask, can SSP5 run on WIN XP Pro?
Cheers
Jerry

YOu don't need to use the get connected wizard everytime you connect, only once, after the first connection you are automatically connected when you connect the cable.
(in fact, you really don't need to use the get connected wizard with cable even in the first connection, because windows will pick up the phone via the cable and install the necessary drivers anyhow, the wizard is there just to help first time users to find the way how to handle the connection.
(just a note, with Bluetooth you need to make the connection between phone and PC Suite once with get Connected Wizard, but not after that even with Bluetooth)
Anyways, if you have a uncertain outcome each time you connect you:
- most likely have a non-Nokia cable that is bad quality, there are plenty to duff cable out there "in ebays"
- or the mechanical connection between the phone and cable is uncertain

Similar Messages

  • Self Service Purchasing vs. iProcurement

    I am looking for a way to allow users who don't have access to the regular purchasing module to input POs.
    Is Self Service Purchasing and iProcurement two different modules? Is Self Service Purchasing what I would need to use to give users internet access to entering POs?
    Thanks

    You could set up automatic rollover from contracts and this way
    the users will actually enter requisitions using catlogs which
    in turn will automatically roll into Purchase orders.
    Self service purchasing is the old name for internet procurment.
    It used to be called SSP4 then SSP5 and now internet procurement.

  • I purchased and downloaded Acrobat Pro XI and have installed it.  I want to create a reinstall disk should I ever need it.  I planned on using a DVD.  I'm running Win 7 Pro w/SP1.

    I purchased and downloaded Acrobat Pro XI and have installed it.  I want to create a reinstall disk should I ever need it.  I planned on using a DVD.  I'm running Win 7 Pro w/SP1.

    Hi halb10567672,
    You can download the setup file again from this Link (Download Acrobat products | Standard, Pro | XI, X ) and Burn it to a DVD Disc using Windows Explorer.
    Please revert back for any further query or assistance.
    Regards,
    Rahul

  • Self service procurement and plan driven procurement in classic scenario

    hai friends,
    i have configured self service procurement and now i am configuring plan driven procurement in classic scenario.my doubt is suppose  a shopping cart is created and placed in a sourcing application of the professional buyer.And assume he accomplished sourcing activity and created purchase order .Now purchase order is created locally or in the backed.i am using classic scenario ,now can u tell where the purchase order is located? if i want to place that particular purchase order in SRM  it self what will i do? thanks in advance.

    Hi Chandra
    before going to select Business scenario (self service, plan driven..etc), you must freeze the technical scenario. Depends upon your technical scenario, your PO will be created .
    Where PO is created it is called leading system. It is SAP standard.
    If you were selected  Classic- Po created in R/3.- R/3 is a leading system .
    if you were select ECS- > PO will created in SRM and Copy also will be created in R/3 system. In EBP only you can edit the PO not in r/3. here SRM is a Leading system.
    regards
    Muthu

  • Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

    It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
    Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
    Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
    Step 3: Connect your usb dvd
    Step 4: Put your win 7 pro dvd in the usb dvd drive
    Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
    The machine restarts
    Message on screen says press a key to boot from cd/dvd
    Press space and it boots up the win 7 pro DVD
    After files copy and load the setup screen asks to accept the agreement and where to install win 7
    BE SURE TO SELECT THE 80GB location
    Then follow thru the win 7 prompts to load it.
    When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
    Make sure to hit enter with windows 7 selected
    The win 7 installation completes.
    You will see many items with drivers not installed dont fret.
    You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
    Many of the windows 8 drivers installed with no issue.
    The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there  about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
    I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
    Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
    Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
    Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
    This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
    ENJOY! This is the BEST machine I ever had!

    It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
    dfw1417 wrote:
    It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
    ENJOY! This is the BEST machine I ever had!
    WHICH machine?
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Problems connecting - 9i and Win XP Pro

    First off, I am a super duper beginner so I understand nothing of this application. I have Win XP Pro and have learned that 8i has issues with P4's so downloaded 9i instead of using the 8i CD I have. I also have the CD for Forms and Reports 6i also. My reason for the installation is a database programming class I am taking. At the current time I have 9i installed and I also installed 6i though am unsure if 9i will work with 6i. I tried to connect to SQL Plus using the username, pw, and hostname my professor gave me and I got an error msg saying "ORA-12541 TNS:no listener" BUT when I check the listener control thing and tell it to start the listener I get an error because it says it has already started and if i stop it and then start it again I still get the same message. I am able to log on to SQL using the generic username and password "Scott" and "tiger" with no hostname but I am unsure if this means anything as I know my info is correct. I am wondering if anyone can help me out. I no nothing about this application to be able to troubleshoot further and also am wondering if 9i will work with 6i. Thanks for reading this far and thanks in advance for any assistance. I think I have installed this app 3 times now and would love to get it all working properly so I can do my assignments....
    Jo-Anne

    Thanks for the reply. He gave us each our own usernames, our own passwords and the hostname to connect to the school. The school dns or ip address, either one, is not his it is the school's oracle server. I used my username and password and it gave me the listener error. In order for me to work from home I have to connect to the school's oracle server, i can't leave it blank. Does that make sense? Thanks again.

  • FAIL TO CONNECT TO OID SELF SERVICE CONSOLE AND SSO

    Since a server crash on 29 Dec I have been unable to connect to OID Self Service Console or login with SSO (even though EM says both are up). When the mid-tier went down http server, portal and webcache would not start due to all three looking for wrong wallet location. Placed and saved correct wallet loc. in ssl.conf and all three came up. SSO engine would not run until I changed the password and ran ssooconf.sql
    When starting OID I get the following errors in the odisrv01.log:
    Oracle Directory Integration Server instance# 01 started..
    Mon Jan 21 14:34:52 EST 2008 : Starting Server to execute Profile Group :default against LDAP Server (devbox1.askafip.org:636)
    Mon Jan 21 14:34:52 EST 2008 : SSL Mode :1
    Mon Jan 21 14:34:53 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:34:54 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:35:04 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:35:06 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:35:09 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:35:10 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    ==================================================
    Not sure where to look next. Any help is appreciated,
    John

    Run the oid services in debug mode and check the log for any errors.

  • OEM12c Self-Service App and OVM3

    Good afternoon,
    Currently I have an OVM3 cluster up and running, managed by an OEM12c instance. It's possible to manage VMs, deploy templates, delete, shut down, power up, et al. I've been trying to get the self-service application to work in order to deploy templates and ran into a few difficulties. Here's a process profile:
    - With 'create like', cloned self-service app role from built-in SSA-User role
    - Created user, associated user with cloned SSA-User role only
    - Propagated basic OEL5u5x64 template downloaded from Oracle into OEM software library, keeping the template as a .tgz file
    - Assigned quotas in setup/cloud/infrastructure for the role
    - After 15 minutes or so, the requested VM shows up in Enterprise/Infrastructure Cloud under 'targets under creation'
    - There is no sign of data import or new directories under OVS/VirtualDisks directory on OVS servers
    Under OEM/Jobs, the following:
    Step: Update Request To Executing     Succeeded     
    Step: Check Privilege               Succeeded     
    Step: Evaluate Parameters          Succeeded     
    Step: Check Feasibility               Succeeded
    Step: Check Import Status          Succeeded
    Step: Import Component               ...
    'Import Component" runs for about an hour and then fails with:     
    Initiating import of software library entity identified by: oracle:defaultService:em:provisioning:1:cmp:Virtualization:Template:B20427B903624B11E04010AC77101520:0.1 on 3110-lab
    Number of SRs in the target : 1
    Selecting the repository OpenFiler-250G with uuid 0004fb000003000030ccb045ec8d6503 as target for import.
    Successfully submitted job for import: Import_2011-11-28_11-16-22-329_0
    Timed out while waiting for import to succeeed. The job will be aborted.
    I'm not sure which logs I should be scouring for this item, but I've tried it multiple times with the same "timeout" results.
    Any assistance or help would be immensely appreciated.

    Many thanks for the input, guys.
    The solution was in adding a password to the software library user, under Infrastructure Cloud, Setup, Software Library User Config. It was blank. Added in a pwd, re-sync'ed the OVM server and we're good to go. I missed that memo for the configuration for OEM12c, it appears.
    Thanks again.

  • Plz send me Employment Self Service Documentation and Navigation

    Hi Experts ,
               I am Searching for Employment self service in ENTERPRAISE PORTAL.
                                          Thankyou.

    Hi,
    Check things like
    /people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
    /people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCCA/CAARCCA.pdf
    Eddy
    PS. Reward useful answers and earn points yourself

  • J2sdkee1.3.1 and win xp pro

    does j2ee1.3.1 work on win xp pro? the setup doc seemed a little weak. does anyone have a detailed setup/install doc they would like to share? may be something with some screen shots so i can tell if i have everything running correctly.
    thanks,
    erik

    Sure:
    http://java.sun.com/j2ee/sdk_1.3/
    I don't recall any difficulty at all in installing it- it's essentially an automatic install. The caveat, on the download page above, is to use it with J2SE v1.3.1_02 or v1.4.

  • Just purchased and downloaded Acrobat Pro, but cannot launch it.  I need to use it NOW!

    I was using the Acrobat Pro trial, loved it, used it every day, so purchased the program and now cannot launch it no matter how many times I download it and try.  Can anyone help?

    What OS? Assuming you are using Windows, there may be something leftover from the trial installation. Try using the cleaner tool and then re-installing.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • Service Partition and win 7

    Hey guys,
    I am going to install win 7 on my t61's c; drive by keeping the service partition( as my prodcut recovery discs are not working).If i do so , will i be able to restore my system using service partion in future... Pleae share ur experiences..
    Thanks in advance....

    This probably isn't quite what you had in mind, but have you considered better disk management software? Acronis Disk Director seems to have no problem with the unknown (0x27) partition on my drive... even recognizes that it's formatted for NTFS and lets me examine the contents.
    Actually, have you tried the Disk Management snap-in to the Computer Management Administrator Tool in XP? (I'm actually using Vista, so the actual name/location might be different.) It shows up there as a Healthy EISA Configuration basic partition.
    I'm sure you'd still have a bootable system if you deleted that partition... of course some Thinkvantage functionality would be lost.
    Honestly, I'd be a bit nervous about trusting those tools if they can't deal with this. 

  • Itunes and win xp pro 64

    I am wondering if itunes is not compatible xp 64 bit os sp2, causing an error message warning about improper install, and update failure. I am using 7.4.3.1 itunes. Does Apple have plans to support 64 bit os's ?
    Thanks Wes

    El Sheepo,
    I've seen your October post pointed to about 100 times on these forums but no one ever comes back and says if your instructions work or not. I have on problem with them. I am the sole user of this PC and am always logged on as the administrator. I do not have an administrator pw setup and would prefer not to since I'll have to enter it everytime I reboot. When I follow your instructions and select to run your commands as administrator, xp asks me for a pw and will not execute correctly without it. I'm using XP 64 Pro sp2. Any ideas?

  • NVRaid for Nforce 4 and Win XP Pro x64?

    Well, I just assembled my new box today (Neo4 Platinum SLI is the mainboard) and I was attempting to install Win XP 64-bit. Much to my disappointment, when I went to install the raid drivers I got a message saying they aren't compatable with the x64 edition of Win XP. Does anyone know where I can find some x64-compatable NVRaid drivers? Thanks!
    -Erock

    If you lost your Driver Disk labeled as "nVidia SATA RAID Drivers"
       This file will teach you how to make one Driver Disk
       First please perpare one formatted 1.44M Floppy
       Then please copy necessary driver from MSI Driver CD
    - Driver for Win2000/XP
      Please copy CDROM:
      nVidia\System\CK804\IDE\WIN2K or WINXP
                                   disk1         file
                                   idecoi.dll    file
                                   nvata.cat     file
                                   nvatabus.inf  file
                                   NvAtaBus.sys  file
                                   nvcoi.dll     file
                                   nvide.nvu     file
                                nvraid.cat    file
    thats msi notes for 32 bit floppy
    just be sure you copy same files with the 64 bit from the xp folder
    basically every thing bar the raid tool folder

  • SBO 2005A and Win XP Pro SP3

    Hi all,
    We used SBO 2005 A SP 01 PL 43 and we have upgraded pack for Windows XP Professional SP2 to SP3. After upgrade has done, we tried open SBO and ask to connection server. If we filled the server name, the connection is failed but if filled IP address, the connection is succeeded. Why if we filled the IP address on server so the connection success?
    If I have some computers and Windows XP has 2 versions SP 2 and SP3, what is there any problem to open SBO?  I think the different version of Windows XP (SP2 and SP3) that is not effect to connection server SBO, what is right?
    Please help for details info.....
    Regards,
    Agung

    Dear Agung,
    As stated in the Service Market Place, windows XP SP3 is supported as of 2007A PL37 and 2007B PL05. This information could be verified in :
    Service Market Place > Channel Partner Portal or Client Portal > SAP Business One > Product Availability
    > Deploy > Supported Platforms > Client Platforms.
    However as you mentioned, the client is able to connec to the license server by using the IP address instead of the Server Name. This could be a changed generated by the installation of the service pack 3.
    It has been observed in previous installations after the SP upgrade, that some services as the DCOM are blocked or changed in their privileges.
    We will recommend you to check the notes :
    833798 - Even when it is targeted to W2003 SP1, the procedure apply as well to XP in order to change DCOM properties.
    784607 - For XP platforms.
    Feel free to update this thread with your results if not solving the issue. Keep in mind, as well that XP SP3 is not a supported platform for your actual version.
    Regards,
    Juan Manuel Marrero
    SAP Business One Forums  Team

Maybe you are looking for