Selfmade Attribute for Expire-Date

hello all,
i have a selfmade attribute which contains a date. now i want that this attribute is the exprie-date. i can not use the default-attribute, because we need this selfmade attribute on many ohter places.
the problem is, how can i define, that my selfmade attribute is the expire-date? or is there a (from oracle supported) way to set the expire-date manually? does someone know a solution or have an idea?
best regards.....RRR

hi james,
i thin k you can do it in su01 logon data tab--->valid through (in validity period).
Hope this will help you.
Thanks,
Tanmaya

Similar Messages

Additional attributes for APO data objects

Hi,
In order to provide some be-spoke functionality I have a need to extend some APO data objects with additional attributes. This includes: resource, PPM, Order. For all I have identified that I cannot use exisiting fields, therefore my aim would be to add new attributes (either directly or via reference Z-table).
I have two questions:
1. What's the easiest way to extended above objects with additional attributes?
2. Is there a ways to have those additional fields visible for edition from a standard transactions, eg.: /SAPAPO/SCC03, /SAPAPO/RES01, /SAPAPO/RRP5?
Note: I'm interfacing with non-SAP ERP therefore CIF is not in use, while I see set of BAdis for master data inbound processing. Is this something I could use?
Thanks,
Mrx

Hi,
As you mentioned, the add. att. are time dependent, it is good to enhance the
0EMPLOYEE structure to handle not only the Master data attribs but also the
time dependent add. attributes..which would be executed along with the Master data chain even after the imp.
Hope this helps..
assign points if useful..
Cheers,
Pattan.

Usage of keyfigure attribute in master data

Hi,
when i am creating the attribute for master data,there the option of "attribute keyfigure as characteristics" is there....
when i create like attribute ,it is showing the keyfigure data types.
my question is, when the usage of the keyfigure as attribute be taken ?
thanks in advance...
regards,
sekhar

Hi Raj
Check this
Tab Page: Additional Properties
Functions
Business Explorer
Decimal Places
You can determine how many decimal places the field has by default in the Business Explorer. This layout can be overwritten in queries.
Layout
This field describes with which scaling the field in the Business Explorer is displayed by default. This layout can be overwritten in queries.
For more information, see Hierarchy Intervals
Miscellaneous:
Key Figure with Maximum Accuracy
If you choose this indicator, then the OLAP processor calculates internally with packed numbers that have 31 decimal places. In doing so, a greater accuracy is attained, and the rounding differences are reduced. Normally, the OLAP processor calculates with floating point numbers.
Exclusive attributes:
If you choose exclusively attribute, then the created key figure can only be used as an attribute for another characteristic, but cannot be used as a dedicated key figure in the InfoCube.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

How can I display the password expiration date for a user

I have created a GUI (using PrimalForms) which runs powershel scripts to pull information like user ID, email address, last logon ec. for the helpdesk to help establish the validity of some user claims of "it worked yesterday" and the like.
I have been asked to add the password expiration date, but I am struggling to get the code for this addition.
Does anyone know how I can include this, and have it in a human readable format?
The current scripts (there are 3) allow the helpdesk staff to search on user ID and display name, the third provides the last logon, it was impossible to include this in the other scripts so I added an extra search button and called it good. An example of
these scripts is below (please note, PrimalForms needs a slightly different syntax in order to get the results displayed, but the core script is standard PS, I use Powershell 3.0)
$results.Text=Get-ADUser -Filter "sAMAccountName -eq '$($EntryBox.text)'" -Properties DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | select givenName, surname, DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | Out-String
$results.Focus()
for info:
$results.text is the window in the GUI results are displayed in
$entrybox.text is the text box the helpdesk staff use to input the user ID or display name of the account they are querying
$results.focus simply tells the script to put the results in the results.text window
The screenshot below shows the current setup, this is purely to put the above information into perspective. Obviously some of the information displayed has been removed/redacted along with our logo.

Hi,
Here's an example you can build from:
$maxPasswordAge = 120
Get-ADUser USER -Properties PasswordLastSet |
Select SamAccountName,
PasswordLastSet,
@{N='PasswordLifeRemaining';E={$maxPasswordAge - ((Get-Date) - $_.PasswordLastSet).Days}},
@{N='PasswordExpirationDate';E={(Get-Date $_.PasswordLastSet).AddDays($maxPasswordAge)}}
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How To Change Default Expiration Date for Portal User in Linux and Windows?

Hello,
I have a couple of environments I recently installed:
1. Oracle Application Server 10 Release 2 (10.1.2) SEOne on Windows
2. Oracle Application Server 10g Release 2 (10.1.2) Enterprise Edition on Linux
I heard the portal and orcladmin user passwords will expire in about 60 days. I want to prevent this from happening. How can I set the expiration date to never expire for both these users? Or at least give me some warning?
I heard that you can do this through the Oracle Directory Manager. However, I am unsure as which server to enter on the field. I've used the following:
<servername>.hostname.com/389
<DBname>.hostname.com/389
They say 389 is the default port. Since I did not really
Does anyone have any ideas?

You have the answer in yours hands:
Search for "60 days" in the forum
How can I enfore Password Expiry Without Lockout?
for instance.
For the servername, it's the name of your server and the port is depending of your platform (have a look to $ORACLE_HOME_INFRA/install/portlist.ini) and
chech the value for: Oracle Internet Directory port
Patrick.

I just buy iPhone4 first hand on Jan 07,2013 but the warranty expire date How can i check for the date of production?

I was bought iPhone4 16 GB on Jan 07, 2013 from online shop from Laos they told me that this iPhone from Apple in Hongkong (first hand) but I check for the warranty is already expire date. What should we do? I want to know about my iPhone4 first hand or second hand. How can i check?

This will show you warranty status and give you an idea
of when originally sold:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Can´t create a date attribute for basic asset

Hi
I created a basic asset where I want to have a date attribute to pick up a date for calendar.
My question is: How can I create a date attribute for a basic asset? For what I understand I have to create an element attribute in my descriptor file like this
<PROPERTY NAME="imagedate" DESCRIPTION="Image date">
<STORAGE TYPE="TIMESTAMP" LENGTH="8"/>
<INPUTFORM TYPE="ELEMENT" WIDTH="24" MAXLENGTH="48" REQUIRED="NO" DEFAULT="" INSTRUCTION="Format: yyyy-mm-dd hh:mm"/>
<SEARCHFORM DESCRIPTION="Image date" TYPE="ELEMENT" WIDTH="48" MAXLENGTH="128"/>
</PROPERTY>
Then, when I create a new instance of this asset, this attribute appears with this error:
Date: Unable to find element OpenMarket/Xcelerate/AssetType/Oportunidade/ContentForm/imagedate
But the element (imagedate.xml) is there!!
I request help.

It seems that the table does not have the entries, maybe b/c we are on R3 4.7. Could you tell me what the entries are suppossed to be to allow the Asset and Cost Center lookup? The search does work for WBS element though and I don't see anything specific to WBS element in that table. In any case if you know the entries that would be great, also this table is not modifiable via SM30, here are the entries that I have in that table.
AUF_NETNR     PLM_HELPVALUES_AUTHCHECK
BU_PARTNER     BUPA_BAPI_F4_AUTHORITY
DAENR     PLM_HELPVALUES_AUTHCHECK
DOKNR     PLM_HELPVALUES_AUTHCHECK
EQUNR     PLM_HELPVALUES_AUTHCHECK
KUNNR     PARTNER_BAPI_F4_AUTHORITY
LIFNR     PARTNER_BAPI_F4_AUTHORITY
MATNR     PLM_HELPVALUES_AUTHCHECK
NW_AUFNR     PLM_HELPVALUES_AUTHCHECK
PARNR     PARTNER_BAPI_F4_AUTHORITY
PS_POSID     PLM_HELPVALUES_AUTHCHECK
PS_PSPID     PLM_HELPVALUES_AUTHCHECK
QMNUM     PLM_HELPVALUES_AUTHCHECK
S_AGNCYNUM     INT_FLBOOK_F4_AUTHORITY
S_AIRPORT     INT_FLBOOK_F4_AUTHORITY
S_BOOK_ID     INT_FLBOOK_F4_AUTHORITY
S_CARR_ID     INT_FLBOOK_F4_AUTHORITY
S_CITY     INT_FLBOOK_F4_AUTHORITY
S_CONN_ID     INT_FLBOOK_F4_AUTHORITY
S_COUNTNUM     INT_FLBOOK_F4_AUTHORITY
S_COUNTR     INT_FLBOOK_F4_AUTHORITY
S_CUSTOMER     INT_FLBOOK_F4_AUTHORITY
S_FLCONN     INT_FLBOOK_F4_AUTHORITY
S_FLCONN1     INT_FLBOOK_F4_AUTHORITY
S_FLCONN2     INT_FLBOOK_F4_AUTHORITY
S_PLANETYE     INT_FLBOOK_F4_AUTHORITY
S_TRNUM     INT_FLBOOK_F4_AUTHORITY
TPLNR     PLM_HELPVALUES_AUTHCHECK
USCOMP     SUSR_BAPI_F4_AUTHORITY
XUBNAME     SUSR_BAPI_F4_AUTHORITY

How to set the Expiration Date for a task which is been assigned explictly.

Hi,
When I assign a task to myself and not work on it for couple of weeks the task is getting released automatically into the original unassigned pool. The TaskActionHandler WSDL is causing that to happen. I don't want a task to be automatically released into the pool when I don't work on it for couple of weeks, how can I make that happen? TaskActionHandler is something which comes with the BPEL so I can't change the way how it behaves. Do I need to set the expiration date or duration explicitly when a task is created?then how do I do that?
If anybody could let me know how to make TaskActionHandler not to release a dehydrated task, I would be glad.
Thanks,
Mythili.

Hi,
Make AUTO RELEASE a restricted action for the task by adding the following line:
<restrictedAction>AUTO RELEASE</restrictedAction>
to the <restrictedActions> tag in the task configuration file.
Works effectively.
Alternatively, you can specifiy the auto release durations on a per task priority basis. There is more on that in the BPEL Dev Guide.
Hth, Sjoerd

Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down).

# Question
Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down). I tried to understand but different javascript file gets different Expires date value when it is being cached. Please help me as I tried lot and could not get proper answer for this. Thanks in Advance.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Stock transfer are not showing correct expire date for Shelf life subcontracting

Hi Gurus,
We have shelf life active for PPDS. We had added 5 characteristic to have min and Max shelf life in APO so that data will be considered during pegging.
Self life works perfectly fine for production plant where based on manufacture date min shelf life is considered.
LOBM_APO_SL_MIN
LOBM_APO_SL_MAX
LOBM_APO_SL_UTC
LOBM_VERAB
LOBM_HSDAT
Question is for sub contracting process stock or inventory date is giving back dated where when we run planning run stock is getting expired.
Can any one help in getting stock correct expire date instead of 1982---- some thing like this.
Thanks in advance
Thanks & Regards,
Rajesh Kumar

When you plan subcontracting in SNP following is generated.
Object                             Source                                   Destination
Sub Con PR (Header)       Sub contractor                       Plant
PR/STR (Child)                Plant                                     Subcontractor
PR (Child)                       Child Mat Vendor                    Plant (or direct to Sub Contractor)
Usually first and third items will get converted to Purchase orders and will vanish as and when Goods Receipts are posted against them.
The second order may not get converted in SAP. Tis will remain in the system. But in the next planning run, these will be deleted if the quantities have been already fulfilled.
Regards
Nitin Thatte

HT1657 Can i get a refund for a rental i didn't view before the expiration date?

Can i get a refund for a rental i didn't view before the expiration date?
I wasn't able to tranfer the movie to the ipad, and couldn't view it on my pc.

All purchases are considered final, but you can try contacting iTunes support and see if they will give you a refund or credit : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Master data maintenance and attributes for GTIN/EAN

A review of the SAP documentation indicates that "You can use the consistency report to change the attributes (for example, quantity, length, height, and so on) of certain materials". The "and so on" seems to imply that the attributes can be user defined. If this correct, where is this data kept? Or do the attributes only include the fields from the Basic data 1 Dimensions/EAN data and Plant Data storage General data?
I would expect we can use LSWM to mass update the GTIN for our existing material numbers. However, for new material master creation is there a function module that would be able to pull the next available GTIN number from the internal number range? Please note that we use LSWM to create all our material numbers. We would like to have the LSWM insert the next available GTIN number.
Thank you for your response
Brian

Hi
I had tried all sorts - attribute change run and manually activating the master data. Still doesnt work.
Anthony

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Selfmade Attribute for Expire-Date

Similar Messages

Maybe you are looking for