Sell the scrap without effecting stocks

Hi Guru,
We have waste material like we purchase some material which was packed in wooden boxes. Now wooden boxes are not in stock and we want to sell those wooden boxes with out effecting stocks.
AT PRESENT : I am creating stocks into the SAP and making the sales invoices, which we do not want.
We want that SAP should allow to generate sales invoice without effecting stocks. how?
Please let me know how to handle such cases.
Regards,
Edited by: VijayAngrish on Jun 2, 2010 7:50 AM

Hi,
The sale of wooden BOx (non-stock) shall be mapped as a direct manual FI entry. The customer will be created as a FI customer. No Logistics module will be involved in the process.
A FI Invoice will be prepared for the sale of scrap with the following entries:
              Customer                           Dr
              Sale of Wooden Boxes     Cr
              Excise Duty Payable         Cr
Take help of FI Consultant.
As a standard practice for materials like this only FI sales invoice are generated.
Hope this will resolve your issue.
Regards,
KRishna O

Similar Messages

  • Issues on Copying the Project without Project Stock Checked

    Hi,
    When I copy the operative project (with project stock unchecked and components assigned to the activity in this project) to create a new project, I checked the project stock in the master data of the new project. Although the new component assigned after the creation of the new porject is project stock, the component copied from the operative project is still not project stock.
    Is there any walkaround or solution to make the copied component to become a project stock?
    Thanks,
    Ting

    What was the item category of materials of the old project which you used to copy?

  • Handling the scrap

    Dear friends,
    Our client is having manufacturing industry.
    During the process, Nearly 10 types of scrap will be generating and storing in seperate place.
    Once in a year , Procurement dept, go for auction and sell the scrap.
    Requirement :
    These scrap needs to monitored on quantity .
    ---From MM side how to Map in SAP , do we need any material type as scrap,
    --How to transfer to scrap.
    Please suggest the step by step how to handle it/map it in SAP.
    Regards,
    Cannad

    HI  ANAND  BY  USING MOVT  TYPE  551    U CAN  SCRAPTHE  MTERIAL  FORM  UNRESTRICETED   STOCK  THERE  WILL  BE  ACC   DOC  CONT   DOC AND  MATERIAL   DOC  WILL  BE   GENERATED   THERE   IS  NO  SPECIFIC  MATERIAL  TYPE  TO SCRAP
    OK
    REGARDS 
    KISHORE

  • If I add a new account user,can I sync my iPhone and iPad to that account without effecting the other user?

    If I add a new account user,can I sync my iPhone and iPad to that account without effecting the other user? I'm trying to sync my iPhone and iPad  to a new account on a computer I am now sharing after my computer died.

    Don't create a new iTunes account.
    Just update everything with new info/change password/ security questions.
    -> https://appleid.apple.com/

  • How to do with  rfc module which one is changed without effect the applicat

    Hi Masters,
                     i have developed one  webdynpro java application with calling some rfc from r3 side. Now i add extra functionality in rfc . now i have to import that rfc without effecting  the already developed application. How can i do. i came to know that some option is there to do this. please give reply.

    Hello,
    If there is change in business logic without adding any additional parameter in RFC, you can directly use the RFC without importing it. There will not be any adverse impact on existing application.
    However, if there is any addtional parameter or structure change, then you have to re-import he model. It is recommended to restart the J2EE engine after model re-import to clear the metadata cache.
    You may need to do context binding based on your business logic and hence some amount of change is required in existing application.
    Let me know if it clears your doubt
    Abhinav

  • Can the items in trash be deleted without effecting the computer

    can the items in trash be deleted without effecting the computer...in other words is the computer using any of the files in trash

    An item that is moved to the trash is temporarily stored until you Empty the Trash. Data that is moved to trash is unusable by the system. Same as it would be in real life where you put items in your trash bin but you could take it back out if you haven't already thrown the trash away

  • Touching the screen of my Iphone without effect

    Touching the screen of my Iphone 4 (iOS 5) is more and more often without effect
    not depending the app I'm working with
    I have to restart but it seems to be longer and longer
    What do you suggest ?
    Thanks

    Use the Settings app.
    Settings > Notification Center > Scroll down to Mail > tap on your Mail account(s) > Tap on None
    And make sure Show on Lck Screen is off.

  • How can I re use titles without effecting the original title?

    Im new to Premiere pro CS5  was originaly an Avid user and I'm currently working on a sequence  where i use a lot of titles for lower thirds and I have added keyframes to the titles to animate them in and out of the screen ,  in avid instead of recreating titles every time, i copy and paste the title and just change the name of the title but in Premiere everytime i change the title it changes all of the the titles from where i copied it from. do i always have to recreate titles in premiere pro or is there a way i can re use an existing title copy and paste it  without effecting the original title? help.

    Open up the original title and click on the 'New Title Based on Current Title' button (A film frame with a T in it). This will then ask you to give it a new name. If you have effects on your first title just copy it and 'Paste Attributes' to the new title.
    Richard Knight

  • Modifying VI without effecting the Code?

    Hi 
        I am Modifying a develpoed software.I studied the software,Devicenet prorcol is used for communication.I want to add Ethernet Communication on that VI.The architecture used for the develpoment is UUT.Is it possible to include Ethernet Protocol to same VI without effecting the code???
    Please Mark the solution as accepted if your problem is solved and donate kudoes

    I am not sure what the UUT architecture means. Since DeviceNet protocol uses CAN and it is not going to affect your Ethernet communication , you can go ahead and develop. Affecting the code really depends how you are designing the Ethernet communication and going to implement it, but you can add without affecting the original operation of the code.
    The best solution is the one you find it by yourself

  • HT4085 I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please he

    I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please help guys

    Sounds to me like a hardware issue or maybe something is stuck in the headphone jack. When you plug in headphones, the jack in the iPad is switched to play only through the headphones and not the iPad's speakers. Sounds like either the jack is faulty or there is something stuck in the headphone jack. Get a flashlight & look inside the jack for anything that looks like it doesn't belong in there.
    Regardless, I'd take it in to an Apple Store if you have one nearby to have it checked.
    EDIT: "Ocean20" had an excellent suggestion above. While doing that, you may also want to rotate/twist the plug in the jack back & forth a few times as well. Dirty contacts can often times be cleared by doing this.

  • 1. How do I delete everything from the library?; 2. How do I delete everything without effecting the albums on facebook?

    1. How do I delete everything from the library?; 2. How do I delete everything without effecting the albums on facebook?

    To delete everything from the iPhoto Library select all photos in the "Photos" view and press the "delete ⌫" key.
    You cannot delete your photos without effecting the Facebook albums, if you are syncing your iPhoto library albums to Facebook.  See Terence Devlin's post here:
    Re: deleting from iphoto but not from facebook
    The only way to delete photos from your iPhoto library without removing them from your Facebook albums would be to sign out of Facebook first by deleting the Facebook account from your iPhoto Preferences:
    From the iPhoto Help:
    Important:  If you delete photos and albums from iPhoto, they’re deleted from your Facebook page, along with any posted comments. You can’t undo this action. To delete photos and albums from iPhoto without deleting them from Facebook, first remove the Facebook account from iPhoto. Choose iPhoto > Preferences, and then click Accounts. Click to select the Facebook account (below the Accounts subhead on the left), and then click the Delete button in the lower-left corner of the Accounts pane.
    Regards
    Léonie

  • I have tryed the "find my ipod application" and i tried to lock it and it have been locked but i am using the ipod without any effects but if by time would be any side effects?

    i have tryed the "find my ipod application" and i tried to lock it and it have been locked but i am using the ipod without any effects but if by time would be any side effects?

    It will be locked when you connect it to Wi-Fi

  • Creating Quantity only transaction without effecting any GL account balance

    Hello,
    Can anybody please let me know how I can create inventory without effecting ay GL
    account balances?  I thought Intial Quantities transaction under
    Inventory transaction module should do it but that is impacting GL
    accounts. If we create a GoodsOrder PO, inventory will be added but it
    impacts a couple of GL account balances as well. But I donot want GL
    account balances to ge impacted.
    Please help!!
    Best regards,
    Sudha

    Hi Samudrikam Sudha 
    It can not be done. When doing anything inside SBO through DTW or Front end or DI API. When you add a document you are actual "posting a transaction". When I use the word "posting" it means it has a financila impact.
    That is the way SAP Business One works. What are you trying to achieve?? Surely you are aware stock can not increase without increasing your stock account. If it didn't then how would the moving average (cost price) of the item match back to the stock account???
    Hope the above helps

  • Scrapping of QI stock which was received from a process order that is closed 2 years back

    Dear Quality Experts,
    I have an incident in which we need to Scrap the Quality inspection-Quarantine stock.
    The details of the issue are
    1. QI stock received from a process order which is closed and settled 2 years back.
    2. The material was having inspection type with Auto UD without IP
    3. Physically the stock is not existing on the Quality inspection floor.
    4. Material is having batch without Inspection lot.
    5. Batch SLED date is in the past (2013)
    6. Tried MB1A with movement type 553 without success.
    Kindly suggest a solution.
    Regards,
    Shiva

    Dear Shiva,
    What error are you getting? Can you elobrate more?
    Sandip

  • IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

    What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
    Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
    Thank you and good luck!
    General info and specs
    First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
    http://www.apple.com/batteries/iphone.html
    http://www.apple.com/batteries/
    ... you didn't read it? loll Always remember this i.e. the definition of "usage":
    Usage: Amount of time iPhone has been awake and in use since the last full charge.  The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
    I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
    Optimize your settings
    Depending on how they are configured, a few features may decrease your iPhone battery life.  For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
    Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
    Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
    Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals.  The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
    Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
    Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
    Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
    Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power.  Go to Settings > General > Bluetooth and set Bluetooth to Off.
    Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas.  Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls.  To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
    Adjust brightness: Dimming the screen is another way to extend battery life.  Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions.  Go to Settings > Brightness and set Auto-Brightness to On.
    Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life.  To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact.  Go to Settings > iPod > EQ and tap Flat.
    Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
    Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
    Standby time: Up to 200 hours (0.5% per hour drain)
    Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
    Video playback: Up to 10 hours (10% per hour drain)
    Audio playback: Up to 40 hours (2.5% per hour drain)
    So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
    A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
    Apple's test methodology for claiming the specs:
    http://www.apple.com/iphone/battery.html
    Procedures
    davidch tips (reset+full discharge recharge):
    Go through these steps to address the battery after updating to iOS 5.0.1:
    1. Reset all settings (settings app-> general-> reset)
    2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
    3. Turn off system location services timezone and iAd
    4. Fully discharge battery  (tilll it shuts off with the spinning wheel)
    5. Fully recharge battery (overnight if possible)
    In my experience this improves the Standby battery drain issue significantly in most cases.  It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple.  Good Luck!
    ram130's variant of davidch i.e. additional steps:
    Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
    Go through these steps to address the battery after updating to iOS 5.0.1:
    1. Reset all settings (settings app-> general-> reset)
    2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
    3. Turn off system location services timezone and iAd
    4. Fully discharge battery  (till it shuts off with the spinning wheel)
    5. Fully recharge battery (overnight if possible)
    6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
    7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
    8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
    9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
    * I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
    ** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
    buxbuster tips(wifi sync, iCloud):
    These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
    Workaround number 1. Deselect wifi-sync in iTunes and press sync.
    If that doesn't work try :
    Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
    If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
    rolandomerida tips - i.e. buxbuster and additional steps:
    Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
    I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
    This is what I did:
    1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
    2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
    3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
    4.Turn Wi-Fi on.
    5. Add the iCloud account again.
    That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
    1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
    2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
    3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
    4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
    So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
    I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
    This is the MacRumors discussion:
    http://forums.macrumors.com/showthread.php?t=1256807
    And dont' forget to check buxbuster's fix, video, and THANK him!
    Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
    As for 4S battery life. Try doing this,
    1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
    Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
    2. Settings>Notification>Calendar ... turn off the Notification Centre.
    3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
    Try these 3 steps first... if it still drains a lot, try the following,
    4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
    If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ...  tap backup to iCloud from your iPhone. It will take a while if the file is huge.
    Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
    Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
    Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
    Once it's all done restored. Turn off your iPhone,.. and turn it on again.
    Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
    Good luck. Let us know if it works for you.
    W. Raider tips (Sirii):
    Bottom line for me of things that helped battery life are:
    1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
    2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
    Hope this is helpful!
    Comments
    jmm514 remarks (Twitter):
    I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
    tmksnyder comments (notifications, corrupt data in iCloud):
    For me, I found my iphone on wifi mysteriously connecting to my mac.  I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud.  The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x).  Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone.  It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification).  I also found that iCloud control panel on OSX would error if I tried to delete the file.  I fixed it by removing the App and doing a hard reset which stopped the sync.  I probably could have turned off iCloud document sync in the phone but didn't think of that.  My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery.  It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage.  My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
    I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby.  I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event.  I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps.  More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
    With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks  that occur for the service on an os level not an app level.  This minimizes the load so there arent a bunch of apps all runing and constantly checking.  The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone.  No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed.  If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery.  I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message.  On nights I get no notifications, I see a 3  or 4 percent drop.  On nights with a number of notifications, i have seen up to a 10 percent drop.  Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain).  For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
    See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info.  I think it has a good overview of how the notifications work.

    Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable. 
    Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
    So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
    Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
    So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent.  If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
    http://mcaf.ee/ricdt
    The original solution still represents a high level of success for users having any battery issues.
    Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
    Make sure your device can run iOS 5.0.1 and is not altered.
    Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
    Reset the device doing a hard reset and software reset.
    Let battery drain and then charge for the full cycle, which is 24 hours.
    I think you will find you will get the battery usage that APPLE has stated for the device.
    Best of luck, stay safe and thanks

Maybe you are looking for