Selling cheap substitute in the name of original hp accessory by an authorised dealer of hp/compaq.
Sir/Mam
I bought a power adaptor 18.5V from an authorised dealer of hp/compaq
(dealers name- enfotech, C-1, Aruna Park, Laxmi Nagar, Delhi-92. phone number: 91-11-28822295 )
invoice no. ET/03-379/08-09 ,amounting Rs. 1600/-
on 2nd april 2009. the power adaptor given was loose without packing and the plug to adaptor cable was missing. The dealer gave me a cheap substitute of grey market in the name of hp original accessory and said that the company sends it like this only. to my disbelief he not only gave me an original bill (invoice number of the same mentioned above) but also said hp provides only half of the adaptor as an accessory in the same condition.
I am shocked and taken aback by the kind of cheating i was exposed to that too by an authorised dealer of hp/compaq. kindly advice what action can i take . should i forward my plea to the consumer court for intentional fraud and cheating? Please help.......
Regards
Sonia
Air India
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!
Similar Messages
-
I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?
With the account mailbox selected, Mailbox menu, Rebuild.
-
Hi, I bought an original iPhone 6 from an authorised dealer in China, however on the back of the phone, the FC, CE, and other safety logo symbols are missing. Is this normal for the chinese iPhone 6?
Thank you for your help!caxx wrote:
Also very strange is that I don't have the folder "MobileSync" in /Library/Application Support/MobileSync on my computer. I can't find that folder anywhere.
Correct.
You need to go to ~/Library/Application Support/MobileSync/.
The ~ indicates your User folder not the top level /Library/ folder.
Click on the desktop, then hold Option and go to Finder menu Go and Library will be there (only when holding Option as it is hidden). -
I hope this makes sense.
I have two sets of pdfs containing 100+ individual pages (totalling 200 pages in one folder)
Set/series 1: a1,a2,a3 -----> a100
Set/series 2: b1,b2,b3------> b100
I would like to create a button on each page that will open a corresponding page number for the other pdf series.
so I click on open file location button that is sitting on a50 for example, it will open b50.
Any tips or clues on how I can execute this? Presumably some smart way of isolating the number (last character) '50' from the existing pdf's name and appending it into the end of the 'b' text to get 'b50' as the file to open?This is not something that you can set in the code I provided. There's an app-wide setting that can be set (in principle) using code, but it's not a good idea to change it, because it applies to other documents as well.
And regarding JS and CodeAcademy: It's always a good idea to try to learn more, but keep in mind that Acrobat JS is quite a niche thing, quite different from the kind of JS that is used in web-pages. You can find more information about it here:
http://www.adobe.com/devnet/acrobat/javascript.html
And here:
http://acrobatusers.com/tutorials -
My husband's password was used to download app. ( Extreme 777) onto my ipad 2. I have now changed the apple ID to my own, but I cannot use my $20.00 credit in itune on this app. It says app. was purchased under another ID and i must purchase app. in my ID. I tried going back to his ID to redemm $ 20.00, but gift cards were redeemed under my new ID, therefore leaving 0 balance under his ID. If I purchase app again, I will lose all current credits on this app. Anyway to change the name on original download or transfer credits to new app?. Thanks
Apps are forever tied to the AppleID used to download them.
You cannot use your AppleID to add credit to an app purchased
under your husband's AppleID. You must either download the
app under your AppleID (in effect starting over) or add credit to
his account. -
I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?
Hmmm. Maybe try this?
OS X: Changing or resetting an account password -
Getting the file name it originated from
hi people..
In php/perl and others there is a predefined variable __SELF__ that can return the name of the file it originated from. does java have such a thing?
thanksSomething like
String thisClassName = this.getClass().getName();perhaps? -
When I was assigned my ".me accounts I used the name of the company that I worked for. Then I received a iCloud account. The problem is I want to change the two original names but can't because they're greyed out. Is there anything I can do?
Thanks in advance,
Majormidihttp://discussions.apple.com/thread.jspa?messageID=3366422
Odd, the link works for me.
-mj
[email protected] -
I have not set up the New-to-me MBA yet.
Thanks so much for that article, however, I think that article is more confusing, since it says that there are 2 names, and then throughout the article refers to at least 4, and I am not 100% sure that was what I am after... So, maybe I am not asking correctly.... let me give more details here..
I had a late 2008 Macbook with 2 "profiles" (work/home) (not sure which 'names' these would be) that was consistently backed up to an external HDD via Time Machine through my wifi network at home. I had upgraded the OS to Mavericks and the "Latest" backup was backed up in Mavericks. This computer was stolen a couple weeks back. I have now purchaed an Apple refurbished macbook air and received it recently and have not even taken it out of the packaging. I assume that it is running Mavericks, but don't know that for sure. Thus, I have not created any new accounts on the new device yet. I want to migrate my backed up files from the external HDD and re-establish 2 'profiles', however, one of the "names" I'd like to change for the new machine. So part of my issue is not knowing what the differences are between, "short names", "display names", "user account names", "profile names", and "home directory names". I know that some of these refer to the same thing, but I am unsure which is which.
What I remember about my old machine was this... When I looked at the Users folder, there were three folders listed within it, "Shared", "work-name", "home-name". I assume these are what's refered to as "home directory names" since they were all lowercase, all one word. When I turned on the computer, the "profiles" that showed up for login had different words than these listed, let's say, "work" and "home".
What I want is for the "work" profile and "work-name" directory to stay the same, and the "home" profile name to stay the same while the "home-name" directory name changes to something else.
I've read many posts now, and haven't found the clear cut example of what I am attempting to do. Some say to create a dummy admin account on the new machine, use Migration Assistance to bring the backed-up files over to the new-to-me MBA, with the two profile names as they existed. In the dummy admin account somehow make changes to the one account I want to change, and then after restart, remove the dummy admin account. I found numerous posts indicating that this may result in permissions problems, which I do not want to have to debug. I'm a decent computer geek, but not a full on superuser.
Other options I've read indicate to plug the external HDD directly into the new machine at first start up and use the Setup Assistant and transfer the info that way. Again however, I then have the issue of one of the names, I'd like changed.
While typing this I found.....
Each user in Mac OS X has a full "Name" and a "Short Name" as defined in the Users pane of System Preferences. The short name can contain up to 255 lowercase characters with no spaces. This is the name used to create a user's home directory (also known as the user's Home or Home folder) in the Users folder.
This is from ealier versions of the OS, so I am not even sure if this is Mavericks friendly or not. -
Is there any way to Mask the Name when a select statement is issued?
Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank Youuser3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand. -
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I'm still learning the whole Mac thing but these are great machines! I purchased a MacBook Air 13" and then thought I should also get a MacBook Air 11" for travel. When I set it up at the Apple store I told the assistant the exact same name for each machine, i.e., "my name and MacBook Air." What I want to do is go back in and rename both of them adding the 11" and 13" designation to the name so that when I set up Time Machine or whatever else I know exactly which machine is what. I'm sure it is very simple but I cannot seem to figure it out. Help please. Thanks.
Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt -
Hello people,
I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
Thanks
<Email Edited By Host>You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method. -
Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone??? -
I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?
Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with.
Maybe you are looking for
-
How do you deploy a portal to a weblogic cluster?
We're using WLServer 6.1 SP2 and WLPortal 4.0 SP2. Has anybody got any experience clustering a portal instance? We can see how to target EJB and WAR components to the cluster server (those components have "Target" tabs when we display them in the con
-
Fagll03 is taking more 45 minutes to execute please help is it justified...
Dear Gurus Our fagll03 report is taking more than 40 minutes to execute with 4 company codes one year data and one g/l local receivables... its been almost 2 and a half year since we have gone live...the result is some 150,000 line items... basis co
-
Decode Error in Cisco VCS for a call from Jabber to telyHD
Hi, We have the following setup: Cisco Jabber <---> Cisco VCS <---> telyHD (Our Video Product) Now, the call works well when the call is intiated from telyHD to Cisco Jabber. But, the call fails when the Cisco Jabber initiates the call towards telyHD
-
i am trying to use pinterest on my computer. i had it installed, in the bookmark bar, it was working properly, and today it has stopped working. i have deleted it, and reinstalled, but still the same problem. please help!
-
Dreamweaver CSA newly bought and installed on my PC serial number not working
dreamweaver CS4 i bought this software on internet in a sealed box , after installation following message , serial number not valid