Selling my BB 8120, What precautions should I take
Is it safe to leave your Sim card in the phone when selling it?
This BB is from the CBW Cincinnati Bell Wireless network.
Will it work on other networks?
Thanks in advance,,,,,,,,,,,,,,,Pete
Solved!
Go to Solution.
No, remove the SIM card. Keep it or trash it. You could have some contacts saved on it or whatever, but it is not needed by the new owner regardless.
1. Before selling, ask your carrier CBW to remove the device PIN from your BIS account. Without doing this, it will not be usable to another user.
2. Do a backup of your old device using Desktop Manager. You never know when you might need that data.
3. Do a wipe on the device at Options > Security > General Settings > Wipe Handheld.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
What precautions should I take before upgrading to iDVD 06 (and iLife 06)?
I have read a few people's experiences on this site about problems encountered after upgrading to iLife 06. I am about to do this and wondered what how I should go about backing up my iDVD and iMovie 5 half-completed projects in case they don't work properly in version 6.
Will a half-completed iDVD 05 project seemlessly covert to iDvd 6 after installation or should I complete it in 5 before upgrading? If I should go ahead and upgrade, in case there are problems, how do I back up my projects in case I need to reinstall iLife 5 to work on them again?
Thanks in advanceAlso, I forgot to mention, I had read that not all the themes that are accessible in iDvd 5 are accessible in iDvd 6 - is this true? If so, what happens if I have used one in my half-completed projects?
-
What precautions should I take before replacing ram
I still have original RAM in my G5, but have just received 2 x 1GB replacements. Do I need to take any precautions before replacing the RAM?
To prevent static electricity buildup, good idea not to do it on a very low humidity day. Humid day would be the best. Touch the Mac's metal chassis before installing or going near the RAM. Maybe overkill, but I use an anti-static wrist strap with one end clipped to the chassis or outside metal frame of the computer. If you're in the US, I think Radio Shack might still have them, although I bought mine back in 2008.
-
I have a 2 yr old Iphone 4 and have not backed up or connected to Itunes up for 1 yr. I have new Windows 7 computer and want to connect and copy Itunes backed up folder from external HD (a year ago) to new computer and install new Itunes and new IOS. What steps should I take and what precautions? I don't want to lose any data on my phone such as music, photos, contacts, notes, texts etc, nor lose music from prior backed up Itune folder. Apps should be OK from app store? Thanks for any help.
Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.
Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/ -
What resolution should i take for a movie to be played on 70X20 LED display?
I am working on an animated video that will be played on 70X20 Feet LED display. What resolution should i take?
size of the screen is 80640 X 23040 (in pixels)
You are going to need a monster to playback something like that. Are you sure? The max comp size in AE is 30,000 pixels. Your specs claim a requirement for 80,640 which is about 20 4K displays.
The data rate for a comp that is 42 times wider than HD would be crazy and probably require an array of high end server grade machines and fiber optics to push even 20 fps video through the system.
As I said before, you MUST contact the manufacturer for their exact media specifications. -
Files in iCloud are only partially downloaded into my computer. What steps should i take so that ALL FILES in iCloud would be automatically downloaded into my computer?
CEE6 wrote:
What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?
You have to make a distinction between the container format (eg, AVI, MKV) and the video/audio format (eg, DIVX). For instance, without additional software, QuickTime can play .avi files with the IndeoVideo codec, but not .avi file with the DivX codec). Further, you have to make the distinction between what can be played using an independent player, eg, QuickTime Player, and what can be played within the presentation software (Keynote or PowerPoint).
You can refer to
<http://mac2.microsoft.com/help/office/14/da-dk/powerpoint/item/7acce321-36fb-48d 6-8c76-12cb3a0063ee>
for suggestions. In practice, for presentation clips, I think you're limited to MPEG-2 and MPEG-4. I don't know if an additional MPEG-2 QuickTime component is required under Lion, you'll have to check that yourself. So, in the end, it's MPEG-4. Both Keynote and PowerPoint Win/Mac should be able to handle it.
can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files
What's a 'safe application'? And why do you have to buy it from the App Store (yuck!)?
Handbrake, as mentioned by X423424X, is free and works very well. There are probably others, too.
this forum is the best place to learn
Perhaps, but it may not be the place to get answers to this question. Try a PowerPoint Mac user forum, they would have more experience in these x-platform issues. This forum is oriented more towards the hardware side of the MBP platform. -
Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?
Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne
-
i recently downloaded an album from itunes and from what it appeared, everything completely downloaded, but 5 of the songs won't completely play through when i want to listen to them. i don't know if the song files are damaged or what. what actions should i take to either repair the files or get my money back from itunes?
Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
What precautions should be needed after enabling auditing in 9i?
Friends,
I have enabled the db auditing.
what are all the precautions i should take care?
Please give me your suggestions.
and in the details can be seen only in sys.aud$?
can i know what are the tables and views are storing or giving the auditing results?
after finishing each auditing am i have to purge the sys.aud$ table?
is the auditing tables are in the system tablespace?
can i export the sys.aud$ for future reference?
thankspls see http://www.oracle-base.com/articles/10g/Auditing_10gR2.php
-
My ipad was stolen this morning; can Verizon track the location of the device an assist the police department in recovering the device? I am filing a police report does Verizon have the serial number of the device for me to include in the police report? I have Total Mobile Protection and need instructions for filing a claim. Is here any other steps I should take?
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Cheers, Tom -
My Mac mini is running very slow, I suspect it is a software problem. I'm new to Mac and would appreciate some suggestions on what steps to take.
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
My DVD-ROM drive does not work -- what steps should I take?
MacBook Pro, a couple of years old. Was used by an employee for 2 years, now have it at home and found that the DVD-ROM drive does nothing when I insert a disc.
What I really would like to know is what are the first steps with this. I don't want to send the machine somewhere. Should I just get a cheap external? Could it be software?If by Does nothing you mean it doesn't even pull in the disk. That sound slike hardware not software.
I imagine it is out of warranty? If it is covered take it to be repaired in a mac store. If not I personally would opt for an external as the cost would be much more appealing. But doesn't hurt to inquire about the cost for having a new internal, or even fixing your current one.
But for my money I would opt for external. -
I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?
I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue. -
STEPS TAKEN:
Logged into Mac for first time today.
Noticed a new individual file in Directory Library ".a.text". (Settings disply hidden system file/folders)
File contained only the text "--purge".
Meta data on file directed source to bash process run @ startup.
Attached History command output.
Disabled ARD for now.
SETTINGS:
All Sharing was Off.
Firewall was set to Block All Incoming Connections.
Home network with no other active users at time.
Upgraded to Mavs 10.9.2 last night.
Do not use any file sharing or remote access into Mac.
The SSH host attempts were my old Amazon EC2 instances.
Appears to start bitcoin app and few databases.
Worth noting I've been having tons of various issues last few months.
Thanks.
<POB> My CommandLine prompts. XXXX on locals.
XXXXXX:~ Administrator$ export HISTTIMEFORMAT='%F %T '
XXXXXX:~ Administrator$ history
<POB> OUTPUT
1 2014-02-27 17:23:35 rm -rf ~/.Trash/*
2 2014-02-27 17:23:35 cd
3 2014-02-27 17:23:35 .
4 2014-02-27 17:23:35 ./
5 2014-02-27 17:23:35 cd
6 2014-02-27 17:23:35 lib
7 2014-02-27 17:23:35 cd/
8 2014-02-27 17:23:35
9 2014-02-27 17:23:35 ls
10 2014-02-27 17:23:35 cd downloads
11 2014-02-27 17:23:35 ls downloads
12 2014-02-27 17:23:35 ls Downloads
13 2014-02-27 17:23:35 find / -nouser -ls
14 2014-02-27 17:23:35 find /~nouser -ls
15 2014-02-27 17:23:35 ls
16 2014-02-27 17:23:35 ls /library
17 2014-02-27 17:23:35 /LaunchAgents
18 2014-02-27 17:23:35 ls /LaunchAgents
19 2014-02-27 17:23:35 ls /Automator
20 2014-02-27 17:23:35 ls /KeyChains
21 2014-02-27 17:23:35 sha
22 2014-02-27 17:23:35 toop
23 2014-02-27 17:23:35 top
24 2014-02-27 17:23:35 dscl . -list /Users UniqueID
25 2014-02-27 17:23:35 $ dscl -plist . readall /users
26 2014-02-27 17:23:35 $ dscl . readall /users
27 2014-02-27 17:23:35 $ dscl . readall /503
28 2014-02-27 17:23:35 ls/Users
29 2014-02-27 17:23:35 - dscacheutil -q group
30 2014-02-27 17:23:35 cd
31 2014-02-27 17:23:35 cd.
32 2014-02-27 17:23:35 cd .
33 2014-02-27 17:23:35 ls
34 2014-02-27 17:23:35 ifconfig
35 2014-02-27 17:23:35 ifconfig
36 2014-02-27 17:23:35 ifconfig
37 2014-02-27 17:23:35 config helper
38 2014-02-27 17:23:35 config
39 2014-02-27 17:23:35 ls
40 2014-02-27 17:23:35 ssh awsXXXX
41 2014-02-27 17:23:35 defaults write com.google.Keystone.Agent checkInterval 0
42 2014-02-27 17:23:35 exit
43 2014-02-27 17:23:35 exit
44 2014-02-27 17:23:35 /var/log/secure.log
45 2014-02-27 17:23:35 ssh awsXXXXXX
46 2014-02-27 17:23:35 exit
47 2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
48 2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
49 2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
50 2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
51 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
52 2014-02-27 17:23:35 top
53 2014-02-27 17:23:35 ps
54 2014-02-27 17:23:35 top
55 2014-02-27 17:23:35 top
56 2014-02-27 17:23:35 top
57 2014-02-27 17:23:35 sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -agent -stop
58 2014-02-27 17:23:35 man who
59 2014-02-27 17:23:35 who
60 2014-02-27 17:23:35 whoami
61 2014-02-27 17:23:35 ps -aux
62 2014-02-27 17:23:35 ps
63 2014-02-27 17:23:35 top
64 2014-02-27 17:23:35 ps -eo pid,etime
65 2014-02-27 17:23:35 top
66 ??ps aux | less
67 2014-02-27 17:23:35 pstree
68 2014-02-27 17:23:35 ps -eo euser,ruser,suser,fuser,f,comm,label
69 2014-02-27 17:23:35 pgrep
70 2014-02-27 17:23:35 pgrep remote
71 2014-02-27 17:23:35 apt-get install htop
72 2014-02-27 17:23:35 htop
73 2014-02-27 17:23:35 netstat -tulpn | grep :80
74 2014-02-27 17:23:35 ls -l /proc/635/exe
75 2014-02-27 17:23:35 swapon -a
76 2014-02-27 17:23:35 ma ps
77 2014-02-27 17:23:35 man ps
78 2014-02-27 17:23:35 man ps
79 2014-02-27 17:23:35 ps -a
80 2014-02-27 17:23:35 ps -A
81 2014-02-27 17:23:35 whoami
82 2014-02-27 17:23:35 ps -f
83 2014-02-27 17:23:35 ps -G
84 2014-02-27 17:23:35 ps -g
85 2014-02-27 17:23:35 ps -T
86 2014-02-27 17:23:35 ps-t
87 2014-02-27 17:23:35 ps -v
88 2014-02-27 17:23:35 ps start
89 2014-02-27 17:23:35 top
90 2014-02-27 17:23:35 ps
91 2014-02-27 17:23:35 users
92 2014-02-27 17:23:35 last
93 2014-02-27 17:23:35 ls /var/log/wtmp*
94 2014-02-27 17:23:35 last -f /var/log/wtmp.1
95 2014-02-27 17:23:35 last -f /var/log/wtmp.0
96 2014-02-27 17:23:35 ~/.bash_history
97 2014-02-27 17:23:35 cat ~/.bash_history
98 2014-02-27 17:23:35 ls /Automator
99 2014-02-27 17:23:35 cat Automator
100 2014-02-27 17:23:35 open ~/.bash_history
101 2014-02-27 17:23:35 dscl . readall /users
102 2014-02-27 17:23:35 ls/library
103 2014-02-27 17:23:35 cd/library
104 2014-02-27 17:23:35 cd..
105 2014-02-27 17:23:35 cd
106 2014-02-27 17:23:35 ls
107 2014-02-27 17:23:35 cd Library
108 2014-02-27 17:23:35 cd/Library
109 2014-02-27 17:23:35 ls/Automator
110 2014-02-27 17:23:35 toop
111 2014-02-27 17:23:35 top
112 2014-02-27 17:23:35 ifconfig
113 2014-02-27 17:23:35 config helper
114 2014-02-27 17:23:35 config
115 2014-02-27 17:23:35 top
116 2014-02-27 17:23:35 ps -a
117 2014-02-27 17:23:35 ps -A
118 2014-02-27 17:23:35 ps -aux
119 2014-02-27 17:23:35 ps
120 2014-02-27 17:23:35 getprocessforpid(677)
121 2014-02-27 17:23:35 man ps
122 2014-02-27 17:23:35 ps -U
123 2014-02-27 17:23:35 ps -u
124 2014-02-27 17:23:35 GetProcessPID(494)
125 2014-02-27 17:23:35 GetProcessPID() q
126 2014-02-27 17:23:35 GetProcessPID494
127 2014-02-27 17:23:35 GetProcessPID 494
128 2014-02-27 17:23:35 netstat -b
129 2014-02-27 17:23:35 top
130 2014-02-27 17:23:35 top
131 2014-02-27 17:23:35 top
132 2014-02-27 17:23:35 netstat -a
133 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
134 2014-02-27 17:23:35 top
135 2014-02-27 17:23:35 netstat -a
136 2014-02-27 17:23:35 top
137 2014-02-27 17:23:35 top
138 2014-02-27 17:23:35 netstat -a
139 2014-02-27 17:23:35 ps -aux
140 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
141 2014-02-27 17:23:35 ps -aux
142 2014-02-27 17:23:35 ps -A
143 2014-02-27 17:23:35 ps -A
144 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
145 2014-02-27 17:23:35 netstat -a
146 2014-02-27 17:23:35 top
147 2014-02-27 17:23:35 top
148 2014-02-27 17:23:35 netstat -a
149 2014-02-27 17:23:35 netstat -a
150 2014-02-27 17:23:35 netstat -a
151 2014-02-27 17:23:35 q
152 2014-02-27 17:23:35 top
153 2014-02-27 17:23:35 top
154 2014-02-27 17:23:35 sudo tmutil disablelocal
155 2014-02-27 17:23:35 exit
156 2014-02-27 17:23:35 top
157 2014-02-27 17:23:35 top
158 2014-02-27 17:23:35 top
159 2014-02-27 17:23:35 top
160 2014-02-27 17:23:35 top
161 2014-02-27 17:23:35 top
162 2014-02-27 17:23:35 neststat -n
163 2014-02-27 17:23:35 netstat -n
164 2014-02-27 17:23:35 netstat -n
165 2014-02-27 17:23:35 ls
166 2014-02-27 17:23:35 lsaf
167 2014-02-27 17:23:35 cd ..
168 2014-02-27 17:23:35 cd ..
169 2014-02-27 17:23:35 cd ..
170 2014-02-27 17:23:35 cd ..
171 2014-02-27 17:23:35 ls
172 2014-02-27 17:23:35 top
173 2014-02-27 17:23:35 netstat
174 2014-02-27 17:23:35 dscl . list/users
175 2014-02-27 17:23:35 cd ~
176 2014-02-27 17:23:35 dscl . list/users
177 2014-02-27 17:23:35 dscl . list /users
178 2014-02-27 17:23:35 dscl . list /groups
179 2014-02-27 17:23:35 dscl . readall /users
180 2014-02-27 17:23:35 netstat
181 2014-02-27 17:23:35 netstat
182 2014-02-27 17:23:35 whoami
183 2014-02-27 17:23:35 ls
184 2014-02-27 17:23:35 cd ..
185 2014-02-27 17:23:35 cd ..
186 2014-02-27 17:23:35 cd .
187 2014-02-27 17:23:35 cd ..
188 2014-02-27 17:23:35 ls
189 2014-02-27 17:23:35 tree
190 2014-02-27 17:23:35 cd Users
191 2014-02-27 17:23:35 ls
192 2014-02-27 17:23:35 cd Administrator
193 2014-02-27 17:23:35 ls
194 2014-02-27 17:23:35 cd ..
195 2014-02-27 17:23:35 cd ..
196 2014-02-27 17:23:35 cd ..
197 2014-02-27 17:23:35 ls
198 2014-02-27 17:23:35 cd Users
199 2014-02-27 17:23:35 ls
200 2014-02-27 17:23:35 cd Adminstrator
201 2014-02-27 17:23:35 cd Administrator
202 2014-02-27 17:23:35 ls
203 2014-02-27 17:23:35 cd Downloads
204 2014-02-27 17:23:35 ls
205 2014-02-27 17:23:35 exit
206 2014-02-27 17:23:35 whoami
207 2014-02-27 17:23:35 ls
208 2014-02-27 17:23:35 ls
209 2014-02-27 17:23:35 cd Library
210 2014-02-27 17:23:35 ls
211 2014-02-27 17:23:35 cd Application Support
212 2014-02-27 17:23:35 ls
213 2014-02-27 17:23:35 cd ..
214 2014-02-27 17:23:35 ls
215 2014-02-27 17:23:35 cd ..
216 2014-02-27 17:23:35 ls
217 2014-02-27 17:23:35 cd pXXXXXXXX
218 2014-02-27 17:23:35 ls
219 2014-02-27 17:23:35 cd Library
220 2014-02-27 17:23:35 whoami
221 2014-02-27 17:23:35 sudo - Adminsitrator
222 2014-02-27 17:23:35 ls
223 2014-02-27 17:23:35 ls
224 2014-02-27 17:23:35 sudo -
225 2014-02-27 17:23:35 more /etc/hosts
226 2014-02-27 17:23:35 scc ver
227 2014-02-27 17:23:35 scc numprofiles
228 2014-02-27 17:23:35 netstat -an |find /i "listening"
229 2014-02-27 17:23:35 netstat
230 2014-02-27 17:23:35 top
231 2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
232 2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
233 2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
234 2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
235 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
236 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
237 2014-02-27 17:23:35 top
238 2014-02-27 17:23:35 dscacheutil -flushcache
239 2014-02-27 17:23:35 sudo killall -HUP mDNSResponder
240 2014-02-27 17:23:35 top
241 2014-02-27 17:23:35 ./bitcoin-qt
242 2014-02-27 17:23:35 cd $home
243 2014-02-27 17:23:35 ls
244 2014-02-27 17:23:35 cd ..
245 2014-02-27 17:23:35 cd ..
246 2014-02-27 17:23:35 cd ..
247 2014-02-27 17:23:35 ls
248 2014-02-27 17:23:35 cd Applications
249 2014-02-27 17:23:35 ls
250 2014-02-27 17:23:35 ./bitcoin-qt.app
251 2014-02-27 17:23:35 top
252 2014-02-27 17:23:35 ps -420
253 2014-02-27 17:23:35 ps -9541
254 2014-02-27 17:23:35 top
255 2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
256 2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
257 2014-02-27 17:23:35 top
258 2014-02-27 17:23:35 ps -a (2077)
259 2014-02-27 17:23:35 ps -a2077
260 2014-02-27 17:23:35 sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
261 2014-02-27 17:23:35 top
262 2014-02-27 17:23:35 on run
263 2014-02-27 17:23:35 do shell script "osascript -e 'tell app \"ARDAgent\" to do shell script \"say quack\"'"
264 2014-02-27 17:23:35 end run
265 2014-02-27 17:23:35 ls -ls /System/Library/Filesystems/AppleShare/check_afp.app/Contents/MacOS/check_afp 2
266 2014-02-27 17:23:35 sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
<POB> ENDI'm extremely unclear on exactly what's happening. You mention something about a script running at startup in your subject, but then never mention that again. What's going on there? Where are you finding that script?
That script would suggest someone playing a joke on you, by making your computer say "quack" every time you start up. That's not indicative of malware.
On the other hand, a hidden file as you describe is a common malware trick, though I'm not sure why it would only contain "--purge" - that isn't a complete command, as far as I know, and the purge command isn't likely to be used for malicious purposes anyway.
Still, you do have some indication that you're using Bitcoin-related apps, and there has been some Bitcoin malware that has appeared recently. See:
New CoinThief malware discovered
Note that the post on MacRumors that you refer to in your second post is almost six years old, and references a vulnerability that was closed later in 2008. It's completely irrelevant to any modern system.
Maybe you are looking for
-
Downgrade to Win 7 Pro on HP ENVY 15 K058CA Need drivers
Got Win 7 installed, all went well, boots and runs. Need drivers for Network, Chipset, USB, and some unknowns. Can anyone point to them. Have tried the Intel HM87 Express drivers they didnt do much and the Intel ethernet drivers with same resuts. Any
-
Linked Column to Item on Another Page
How does one link a report column to an item on another page? I can link to another page, but I can't get the value into an item on that page.
-
how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley
-
Third-party Applications Responding to an iCal Alarm Twice
This issue involves multiple products so I apologize ahead of time if I have put this in the wrong topic or site and would appreciate any suggestions as to whether or not I should refer to the developers of the third-party apps involved. As an enthus
-
SQL Server Express 2012 Installation File Not Found
The installation is failing with the following log information found in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\[log folder]\Detail_ComponentUpdate.txt First, with no luck installing from the downloaded .exe file, I extracted it