SEM 4.0 Management cockpit buffer job - long runtime

Hello,
we run SEM 4.0, and have 14 cockpits with each 4 frames. Several frames are based upon the same query, in the buffer job definition we use the CPM variables to select the subset of data from the query that is to be used. The queries themselves use restricted key figures.
The problem we have is that these bufferjobs are taking a lot of time (more than 5 hours). We are using aggregates, compression, cube indexes are OK, queries do not have exclusions, ...
Is there any other way to improve the runtime for these bufferjobs? There are no hardware limitations - CPU and MEM are underutilized.
Thanks in advance,
Wouter Hanson

closed - cockpit queries were too generic and have been redesigned

Similar Messages

SEM Management Cockpit - "Data Last Updated On:" message

Dear gurus,
I would like to know if there is a way to suppress the message "Data Last Updated On: XX.XX.XXXX XX:XX" it the SEM Management Cockpit graphics.
It started to appear after a support package installation but it is not a desired info for our users.
Thanks in advance.
L. Felipe

Hi!
Got the solution! I had to enable the query for external access in the Extended Query properties. Post that the data source is being recognised in my SEM 3.5 managment cockpit.
regards,
Anirudha

Enabling a Graphic Frame on the Management Cockpit

hi!
I am trying to enable a graph on one of the frames in a management cockpit.
At the step where we are required to configure the measure catalog connection, the system is not determining the data source based on the measure I have selected. I have updated the BW master data post creation of the measure.
Is there any other activation which needs to be carried out before assigning the measure to the frame configuration ?
regards,
Anirudha

Hi!
Got the solution! I had to enable the query for external access in the Extended Query properties. Post that the data source is being recognised in my SEM 3.5 managment cockpit.
regards,
Anirudha

SEM-CPM Balanced Scorecard and Management Cockpit

Hi
Does anyone have any examples(screenshots) of the Management Cockpit and Balanced Scorecard BSP applications?
Thanks
Yeteen

Leelananda and others PLEASE NOTE!
This original post was in 2006 and Jason does NOT seem to be an active member. His member email bounces so he will not receive any alerts about updates to this post.
SEM-BSC is a product that has been sunset. The current SAP product for using the Balanced Scorecard is SAP BusinessObjects Strategy Management, (SSM).
I would be happy to provide information about SSM if you would like. Contact me directly.
Regards,
Bob

SEM CPM - Management Cockpit

Hi Guys,
Currently we are working on creating SEM CPM management cockpit and the requirement is as follows,
1.we need to diplay one of the query result directly in the dashboard.(without any graph)
2.We need to create a table display with 3/4 KPI's which belong to different query(for the last 3 months). eg
     Month1 Month2 Month3
KPI1        x                 x              x
KPI2       x                 x              x
KPI3        x                 x              x
It would be great if you could help us on the same.
Thanks,
Suthakar M

Hello Ashok,
In my opinion, this tool cannot be used in Business Objects.
Our [end user documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] does not have any comment. I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Graphs in Management Cockpit SEM 4.0

Hello All,
We have upgraded our BW and SEM systems from 3.0 and 3.1b to 3.5 and 4.0 respectively.
We are now seeing a strange behaviour. In SEM 3.1b, while creating graphs in the management cockpit, we were able to assign specific colors for each column of a graph, say for example.. a custom color for Actuals and a custom color for planned amounts.
However, after the upgrade, we are unable to see any option to customize the columns in the graphs.
Am I missing something simple? Any and all help is deeply appreciated.
Regards
Sunil

<i>Dear Jeroen:
For showing tables below any graph in SEM Management Cockpit, you have to select "Data Table" in the design of the graph. Attention: It's possible that you have problem for seeing this in the presentation, because It's probable that you need applying a note.
Please, If you have this error, let me know and I find note's number.</i>

Integrating VDT with Managment Cockpit in SEM - CPM

Hi ,
I am working with Managment cockpit in SEM-CPM. I want to integrate my Value Driver Tree ( VDT ) to my Managment cockpit. Can anybody tell me the procedure of the same.
Thanks & Regards,
MANDAR

hi mander,
follow this link.
https://help.sap.com/saphelp_sem320bw/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
look out at the cpm-vdt node of this link.hope it will provide you the information you need.

Value range(column chart): management cockpit

Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
raju

Hello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1.     To define a periodization, choose Periodization in the dialog structure.
2.     Choose to switch to change mode.
3.     Choose New Entries.
4.     In the Periodization column, enter a name for the periodization (up to four characters).
5.     In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6.     In the Long Text column, enter a descriptive name for the periodization.
7.     Save your entries and return.
8.     In the list of periodizations, select the periodization you just created.
9.     Choose Interval in the Dialog Structure.
10.     Choose New Entries.
11.     In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12.     Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
               Start Column          End Column
Period 1(<1 yrs)           1               12
Period 2(2-4 yrs)                     13               36
Period 3(5-6 yrs)                     37               60
Period 4(>7 yrs)          61               specify the no. of months you want to calculate for
13.     Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh

Presenting data on a daily or weekly basis in Management Cockpit

Hello all!
I'm working at a manufacturing company that needs to follow up production data at a daily or at least at a weekly basis. Is it possible to present data on these levels in Management Cockpit or are the only options month and year?
Regards,
Peter Estberg
IT-department
Sapa Profiler AB
Vetlanda
Sweden

Hi
If your taking report from SEM / BW, whichever server your taking report there you have to create a time variable for week
You have to do a little bit workaround for this
Create time char for CALWEEK
Write coding in update rules to feed them - feed directly if source is having calweek values,
If not you have to write a routine referring the available time charrs
Then inculde this in time char in your data target and in the query and in the selection screen of the query
To include in the selection screen you need to create a variable for selection referrring this time char for week
Hope this helps
Regards
N Ganesh

Drlldown(management cockpit)

Hi friends,
Could anybody simply explain what is meaning of drill down in managment cockpit?
1. How many levels of drill down, one can provide drill-down in a frame?
2. Can we drill down from monthly to calday wise, year to date,month to date and quarter to date?
3. How can i use calmonth in interval representaion in selection criteria of a frame (cockpit design)?
Ours Version SEM6.0 on BI7 system.
Line: -
If anybody able to access below url info, pls forward me info in this thread:
Make the SEM Management Cockpit More Useful with Drill-Down Configuration
by Paul Halley, Director of Strategic Enterprise Management, Business Information Solutions
Financials Expert - Volume 3 (2004), Issue 2 (February)
http://www.financialsexpertonline.com/article.cfm?session=&uid=d05762e8-8d85-450f-bcea-228d9cd01f3e
thanks,
naresh

static drill-down

Error while trying to register the SMP3.0 Application on Management Cockpit Using Logon Plugin

Hi,
I am working on SMP 3.0 SP 02 ->cordova 3.3.1 - 0.3.1, i am able to ping the Odata endpoint in Management Cockpit successfully. I followed the steps which are present in the getting started with kapsel - 2 (use of logon plug in). i am able to register to SMP 3.0 server by using register.html on the machine that SMP server is running but not from other machine using port 8083. Also if i try to use registration2.html which uses login plugin am getting the errors. Please help me out with this error
{"errorCode":"80003","errorMessage":"Unable to reach Backend URL","errorDomain":"MAFLogonCoreErrorDomain"} at file:///android_asset/www/plugins/com.sap.mp.cordova.plugins.logon/www/common/modules/Utils.js:4
Thanks
Varsha

<<I am able to register to SMP 3.0 server by using register.html on the machine that SMP server is running but not from other machine using port 8083.
As mentioned above, by default port 8083 is used only by the management cockpit. Try using the HTTP port which by default is 8080.
The ports are configured in this file.
C:\SAP\MobilePlatform3\Server\config_master\org.eclipse.gemini.web.tomcat\default-server.xml
If the registration fails one quick test to verify basic connectivity to the SMP 3.0 server from the device or emulator is to open the following URL from a browser on the device or emulator.
http://SMP_Server_IP_Address:8080/sapui5/
If the above URL opens correctly in a browser on the machine that the SMP server is running on but not from the browser on a mobile device or emulator there is likely something such as a firewall preventing communication over port 8080.
Here is a link to the Getting Started With Hybrid or Kapsel for SMP 3.0 document.
Getting Started with Kapsel - Part 1
Regards,
Dan van Leeuwen

Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)

Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
naresh

Naresh,
   Couple of suggestions...If this thread is   still relevant....or please close this thread...
1) Make sure you are   not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check    Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal.

Status of elements not appearing in Management Cockpit

The Problem is as follows:
when you look into the management cockpit and ask to display data from, for
example, December 2004, the cockpit shows all the four walls with
elements without status, when, in fact, all the elements have a status.
You can notice they have a status (green, yellow or red) when you click
and see the detail (for example, the financial situation is shown with
no status, but if you go into financials and then to the general
overview, for example, you can see that you've got maps and status
there. So, in the financial situation you should have a status as well).
I am using SAP_BW 3.10
Looking forward to hearing from you.
Regards,
Deepak

hi,
Usually when I browse sourcing area the last work item should be my shopping cart line item.
But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
regards,
IGA.

Traffic lights in management cockpit

hey pals,
whats the best way to bring in traffic light status on to the frames in management cockpit.its pretty much easy to bring when u assign tachometer as chart type but will this work for all kinda charts?.....its urgent.....
saggi

hey pals,
whats the best way to bring in traffic light status on to the frames in management cockpit.its pretty much easy to bring when u assign tachometer as chart type but will this work for all kinda charts?.....its urgent.....
saggi

How to display hidden columns in Management Cockpit Reports

Hi all,
I need to display columns with zero values in a management cockpit report graph. I think the report had been set to hide columns without values and only brings charactesitics whose values are not equal to zero.
Could anyone help?
Thanks in advance.
Sezin

HI,
After you are executing the report, on columns right click & select filter options-> if 0 values will be there then you can filter it by 0 & get the report

SEM 4.0 Management cockpit buffer job - long runtime

Similar Messages

Maybe you are looking for