SEM and Enterprise Portals with BW

Hi All
Good day to you.
I just want to Know about SEM and how does we interact with SEM with BW.
As well how to interact with Enterprise protals.
Thanks a lot
Regards
vijay
Message was edited by: sundaresan chander

Hi Vijay,
    I am looking for the same type of topic as you asked.
    sub : SEM and ENTERPRISE PORTALS WITH BW
    so kindly give the details of SEM and BW separately.
    Like what exactly the use of SEM and BW.
    How SEM can utilized in to BW.
    Expecting a response from you.
Regards
Krishna
mail id : [email protected]

Similar Messages

SAP CRM 7.0 and Enterprise Portal

Dear SAP Gurus ,
I have question about the New CRM WEB UI and integration to SAP Enterprise Portal .
We have been using the SAP Enterprise portal for accesing the SAP CRM functionalities before (eg create Opporutnites and Sales Order ). But with the New SAP version(7.0 and 2007 ) its possible to have its own portal.
Now the question is it possible to integrate the NEW SAP WEB UI into the existing portal ? Eg: If we want to have link in Enterprise portal with the Sales Order create functionalyt direlty without going into the stand alone CRM WEB UI . Would it be possible to directly call the Sales order service WEB UI in enterprise portal . Right now what we see is that the NEW CRM WEB UI is stand alone and for these type of fuctionalites the user need to login to the NEW web ui and then go to the create sales order screen .
Is it possible to directly embed the new UI components in the existing SAP enterprise portal ?
Many Thank for your kind advise !
Best Regards,
Ankur

Ankur,
Once you have correctly integrated to Portal following the SAP Note, you will no longer see the CRM Navigation. They will be Portal Navigation. If you have read and understood the note, it will be clear. On an overview, let me explain the steps involved.
1. You create a CRM role (based on some job role) say "Sales Rep" and have configured the CRM Web UI for all the navigation and applications. Like Account maintenance, Opportunities, Sales order create etc. etc.
2. Following the note and running a CRM transaction, you will now "Export" this CRM role to an external file. This file is very similar to a "business package". All the portal roles, pages, iVeiws etc. get created.
3. You will now "Import" this into your portal. Again follow the notes to know the loaction.
4. In the portal, you will assign this "portal role" to your users.
When these users log on to portal, they will see Portal Navigation (not the CRM navigation). So, the main point lies in defining the CRM role and get it working.
Hope you get the point....
Easwar Ram
http://www.parxlns.com

Double stack BI and Enterprise portal for SSO

I am in the process of configuring a double stack BI and SAP Enterprise Portal. Both systems are residing on different domains. We want to utilize the standalone SAP Enterprise Portal for our BEx etc. For that I have exchanged certificates between the ABAP and the SAP Enterprise Portal systems and with the help of Support desk tool I have overcome the certificate issues. The RFC connection from ABAP and SAP Enterprise Portal works fine. The Support desk tool is complaining now about the prefix of these two servers. Also when I check the connection testing between these two systems all the messages are correct except for WEBAS connection it complains about the ping service which is already active on ABAP side. For Connectors it complains about SSO which is not detected/complained by the Support desk tool (0.426). I need your advice:
1. Either uninstall the JAVA instance of BI or
2. Make a Federated Portal network by making the BI JAVA as PRODUCER and the SAP standalone as CONSUMER.
The Support package levels are the same as EHP1 SP 7 of both the double stack BI and the standalone Enterprise Portal systems. The source of users are both local to the systems.

answered

BI 7.0 Web Report and Enterprise Portal

Hi,
We have recently performed technical upgrade to BI 7.0
Now we would like to migrate web reports to NW2004s functionality. Is it necessary to configure inbuilt BI Portal before we can use web reports?
Best Regards,
UR

Hi,
take a look at this note which describes how to setup BEx Web in SAP NetWeaver 2004s. All required steps are mentioned. Additionally, this note contains a checklist to check the installation and configuration.
SAP NetWeaver 2004s: Setting Up BEx Web
SAP Note Number: [917950 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
In SAP NetWeaver 2004s, load is moved from AS-ABAP (BI-ABAP) to AS-Java (BI-Java). BI generates load on Portal (AS-Java), therefore BI users generate more load on Portal than normal Enterprise Portal users. See note 927530 for additional information about BI-Java sizing.
Which functionalities of BEx Web in SAP NetWeaver 2004s are requiring a Portal?
- New BEx Web Application Designer (Unicode, Command Wizard, ...)
- Exporting to PDF and Printing
- Integrated Planning
- Drag&Drop (Analysis Web Item)
- Web Items (Container Layout, Menu Bar, Tab Pages, Button Group, ...)
- Formatted Reporting with BEx Report Designer
- Document Integration with storage in Knowledge Management
For details, see Release Notes for Usage Type BI-Java under http://help.sap.com/saphelp_nw04s/helpdata/en/index.htm
If you don't want to use the new BEx Web functionality, you can still use BEx Web 3.5 Runtime that is running only with Usage Type AS-ABAP.
Take also a look:
[Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
Regards
Andreas

Integration of SAP enterprise portal with ATG dynamo platform

This is more an architectural question.
There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
ATG 6.2 and above allows integration in 2 ways :
1) Use web services
2) Integration framework using JMS/RPC etc
[Pl. see the ATG documentation www.atg.com/support]
I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
My theoretical understanding is:
a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
c) Are there any other options?
I'm completely new to the SAP netweaver platform but have a good idea on SOA.
Any help or inputs on this will be highly appreciated.

Hello,
I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
Best Regards,
Ran

Creating users in enterprise portals with CUA as userbase

Hi All,
we are using CUA system for maintaining the users and we want this users to be used in enterprise portals. So while installing WebAs itself, we specified the connection details to this CUA system. then we installed portal and we were able to view the users of CUA in portal.
now i am creating a user from portal, create user option in UserManagement. but i just get an error like, could not create a user.
i checked out in system administration->umconfiguration-> sap system. all the details that we specified during the webas installation appear there by default.
so could you please let me know what the problem could be
thank you

Raj,
I know that your problem was solved, but I've come across following SAP link. Hope, it helps other ppl..
TITLE: Requirements for Service User Used to Connect to SAP Systems
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Thanks,
Pritesh.

Solution Manager and Enterprise Portal 7

Hi,
I installed an Enterprise Portal and have connected it to our SLD. So far, so good.
When the system landscape fetch reads the data from our sld the new installed portal appears in SMSY under System Components and not under Systems as the rest of our Systems. So it is not possible for me to assign it to a logical component. Is this normal? Where is my problem?
Thanks ahead,
Bernd

Hi Paul,
Do you have a documentation how I can download it using the solution manager maintenance optimizer? Any transaction code or something else.
Best Regards
Nadin

Unable to connect Enterprise portal with GRC AC CUP

Hi Guru's ,
We are configuring Portal with CUP so that we can provision portal roles. We have installed RTA in EP ( both producer and consumer) and have set up the connector portals We have setup the parameters of the connectors as below. Not sure why when I am trying to import role this is not working. Can you please help.
ASSIGN_ROLES:OC
saprole
ASSIGN_GROUPS:OC
sapgroup
CHANGE_USER:OC
sapuser
CREATE_USER:OC
sapuser
CREATE_USER:password
password
DELETE_USER:OC
sapuser
LOCK_USER:OC
sapuser
LOCK_USER:islocked
true
LOCK_USER:type
CHANGE_USER
ROLESEARCH_URI
http://server:port/UserroleSearchForAEService_5_3/Config1?wsdl&style=document
ROLESEARCH_URI_PASSWORD
password defined for Portal user (for retrieving roles)
ROLESEARCH_URI_USERNAME
Portal user id (for retrieving roles)
ROLE_DATA_SOURCE
ROLE.UME_ROLE_PERSISTENCE.un :
SCHEMA_ID
SAPprincipals
UNLOCK_USER:OC
sapuser
UNLOCK_USER:islocked
false
USER_DATA_SOURCE
Choose data source as configured in Portal UME:
USER.PRIVATE_DATASOURCE.un:
USER.R3_DATASOURCE.
USER. CORP_LDAP.

Hi GS GRC team,
Check the below link from RIG that explains you the detailed steps to configure CUP with EP:
[RIG Document on configuring GRC CUP with EP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502a14db-6261-2c10-22b5-95117ab0e5ed?quicklink=index&overridelayout=true]
Regards,
Raghu

ABAP WD: Different display in Test window and enterprise portal

Hi,
I am using Table and TreeByNestingtable column in ABAP webdynpro(Basis 710 release). When I run the application using test, table captions are not in bold and there is no difference between TreeByNestingtable column and other columns in background color.
But when I display the same component in Enterprise portal using iview(EP 6), the table captions appear in bold and TreeByNestingtable column and other columns appear in different background color.
Has anybody encountered this issue? And how do we resolve it?
Regards,
Srini.

Please see OSS Note 903662 on restrictions and steps for running ABAP Web Dynpro in older releases of the portal. In particular you should disable the portal style sheet.

Connecting Enterprise Portal with SAP ECC 6.0 for ESS/MSS

Hi,
I am trying to connect my Portal with the ECC backend but getting the error "SAP_R3_SelfServiceGenerics_MetaData". However when I tried to set the configuration in the JCo destination, I am not able to locate the message server for my ECC instance in the configuration page.
Any idea on this?

Hi,
Do the following steps.
1. Login to your SLD URL
http://hostname of sld:5<NN>00/sld
give the input as administrator username and password.
Once you are IN.
click on administrator TAB
Click on Profile TAB
In section TAB select DATASUPPLIER
Fil the detail in GATEWAY HOST and GATEWAY SERVICE ( SAPGW<NN>)
Gateway information should be on newly install gateway instance.
Then click on save.
Again click on Administrator TAB and click on STOP SERVER and then click on START SERVER.
Once above actvity done on SLD syste,.
Then go back to your ABAP stack in RZ70 and mainain the neccesary detatils and start the job, it should work now.
Thanks
Anil

Implementing Application gateway for 2 enterprise portals with backend syst

Hello Experts,
We have a scenario where in we have 2 different portal with backend SAP systems attached to them. We want to expose those to internet. we have an SSL certificate with a FQDN https://www.XXX.com
Can we have a mechanism in the application gateway wherein we can bifurcate the two portals by https://www.XXX.com/abc and https://www.XXX.com/xyz so that different users can logon to specific portal.
should we use a web dispatcher or apache reverse proxy for this scenario.
Awaiting your reply.
Regards,
Vinayak

Hi,
A while ago you had no choice then Apache Reverse Proxy...
Since a while now SAP has enhanced the Web Dispatcher so that one web dispatcher installation can handle more than one system. Check the following articles for details:
Overview: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/03/afe24bfeb7419b9172ffb6e7636926/frameset.htm
Detail: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
Example: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
PS you still can choose to use the Apache Rev Proxy foor this but now you also have an native SAP alternative ....
Cheers and good luck,
Benjamin Houttuin
Edited by: Benjamin L.F. Houttuin on May 31, 2011 10:10 AM

Using dcmctl and enterprise manager with OracleAS 10.1.2.0.2

Hi
I know that in OracleAS 9.0.2 there were problems when you tried to use dcmctl and Enterprise Manager at the same time. Does OracleAS 10.1.2.0.2 has the same problem.

hello,
somewhere (i really don't remember where, but it was in the oracle documentation) i'm sure i read that already in 9.0.4 you could use dcmctl when enterprise manager was up. but i've never experienced it and i prefer not to try!!!
fabrizio

Is it possible to have SSO between R/3 4.6 and Enterprise Portal 7?

I am trying to configure an R/3 transaction between R/3 4.6 and SAP EP 7.0. I have fulfilled all of the requirements for configuring SSO between Portal and R/3. I guess it is the ITS server that is running on a Windows machine. When I run the iView it gives me the logon screen of the WebGui service on ITS asking for user name and Password. Please help.

I am having also the same issue. 
Our existing portal 6.0 via ITS 6.20 to 4.6C backend SSO is working fine. 
However we just installed SAP NW Portal 7.0 and like to connect via ITS 6.20 to 4.6C using same configuration.
I configure the SSO and make sure things is there. It still does not working and keep asking for username and password. 
I configure another iView and use SAP GUI for Windows with test tcode SP02 and preview it, I could automatically connect to the system with SP02 screen. 
I wonder for this case the SSO does not work via ITS 6.20 whereas iView with SAP GUI for Windows work perfectly. 
The trace I get for SSO via ITS 6.20 is just one line 
Y Thu Oct 15 06:31:16 2009
Y *** ERROR => multiple DiagSetGuiConnectData call [diagext.c 584] 
The trace I get for iVIew with SAP GUI for Windows is as follow: 
Y Thu Oct 15 08:15:09 2009 
Y *** ERROR => multiple DiagSetGuiConnectData call [diagext.c 584] 
N conv_lang_iso2sap : no conversion necessary 
N dy_set_sso_ticket: SSO logon data stored 
D *** ERROR => invalid APPL header [diagext.c 1024] 
D *** ERROR => 16 [diagext.c 1025] 
D *** ERROR => id 4 [diagext.c 1026] 
D *** ERROR => sid 23 [diagext.c 1027] 
D *** ERROR => invalid APPL header [diagext.c 1024] 
D *** ERROR => 16 [diagext.c 1025] 
D *** ERROR => id 4 [diagext.c 1026] 
D *** ERROR => sid 22 [diagext.c 1027] 
N syssigni: SSO logon data retrieved 
N dy_signi_ext: SSO TICKET logon (client 300) 
N mySAPUnwrapCookie was called. 
N RunningCompatibly said: I'm >= 46C. 
N mySAP: Got the following SSF Params: 
N DN =CN=PRD 
N EncrAlg=DES-CBC 
N Format =PKCS7 
N Toolkit = 
N HashAlg =SHA1 
N Profile =/usr/sap/TRN/DVEBMGS30/sec/SAPSYS.pse 
N PAB =/usr/sap/TRN/DVEBMGS30/sec/SAPSYS.pse 
N Got the codepage 6300. 
N Got ticket (head) AjExMDAgAAtwb3J0YWw6c2Zvb4gAE2Jhc2ljYXV0. Length = 524. 
N Got content client = 000. 
N Got content sysid = PEP . 
N Got date 200910151442 from ticket. 
N Cur time = 200910151515. 
N Computing validity in hours. 
N Computing validity in minutes. 
N CurTime_t = 1255706100, CreTime_t = 1255704120 
N validity: 28800, difference: 1980.000. 
N MskiValidateTicket returns 0. 
N DyISigni: client=300, user=SFOO , lang=E, access=A, auth=T 
N usrexist: effective authentification method: mySAP.com logon ticket 
N password logon is generally enabled (default) 
N password change not required (expiration period=0 / days gone=46) 
N usrexist: update logon timestamp (M) 
N save user time zone = >PST < into spa 
N syssigni: SSO logon data released (roll area) 
N syssigni: detected workplace context 
N DyISignR: return code=0 (see note 320991) 
Anyone have any ideas or comment ? 
Edited by: Steven Foo on Oct 15, 2009 5:19 PM

BI content and SAP Enterprise portal connection

Hello All,
i m new to SAP enterprise portal , can anyone explain me the connection of BI content and Enterprise Portal.Please explain me the flow of publishing the Bi reports to EP.
Thnks in advc.

HI Sonal,
For publishing BI reports in portal you need to Integrate BI into Portal.
Please refer to SAP Notes:
916950
937697
They are very helpful.
Procedure for publishing after integrating BI with portal:
For this you need to create Roles-Worksets-Pages---Ivews.
The name of the report which you want to be displayed in TLN you need to make a Role for that and the tab under that name you need to create worksets for that and the content of the report you need to create an ivew for that in this way your report will be displayed in portal also you need to righht click on the workset and <add workset to Role>and similarly for ivew also keeping entry point "YES" for a role is mandatory with the main report name in TLN and and the sub tabs under below it and the content indetailed navigation.
For publishing simply create a Role --workset and an ivew .
During creation of an ivew the wizard will ask you for a Query string that Query will be given to you by your BI people you just neeed to copy that query after ? mark and paste it in and then save it hence your report is published in portal.
This is basically the proceddure for publishing BI reports in portal. You can ask any doubts if you hae in this.
Regards
Pooja
Edited by: Pooja Gehani on May 26, 2008 5:44 AM

Enterprise Portal INtegration with ECC 6.0

Hello Experts
I have installed ECC 6.0 SR3 and Enterprise POrtal 7.0 Systems. These two servers were installed on Virtual servers using cloud computing. ECC 6.0 I.P is 173.X.XX.164 and EP system was installed on 173.X.XX.169 IP. I need to set up connectivity between these two systems and make EP system as front end and ECC 6.0 as Back-end. HOw can i accomplish this?
Please advise.
Thanks in advance.

Thanks a lot Folks. I was setting up SSO between EP and ECC 6.0. I got stuck while creating JCo RFC Destinations in VIsual Admin Tool.
Visual Admin Tool--> JCo RFC Provider. UNder Registered Servers i have to give a program ID -, Gateway host Gateway service and Server Count. COUld you please tell me where can i find the values for input.
Also under Specific Application Server i give my ECC 6.0 Server details. But i get an error message that says..""Error Starting BUndle --See Log for details"" and the logfile indicates the following:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\EPD\JC00\j2ee\admin\log\.\system\visual_administration.log]/>
<!PATTERN[visual_administration.log]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[0, 5, 10000000]/>
<!PREVIOUSFILE[visual_administration.4.log]/>
<!NEXTFILE[visual_administration.1.log]/>
<!LOGHEADER[END]/>
#1.5 #C0000A6DA602000000000000015151AA000496D082671400#1291722191984#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
#1.5 #C0000A6DA602000100000000015151AA000496D090726E28#1291722427625#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#######Thread[Thread-14,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#Plain###Administrator disconnected.#
#1.5 #C0000A6DA6020000000000004914A947000496D112D72AE8#1291724615250#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
#1.5 #C0000A6DA6020000000000006AD2B64E000496D1C094A160#1291727530140#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
#1.5 #C0000A6DA60200000000000029422384000496D1D21F7D88#1291727824453#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
#1.5 #C0000A6DA60200010000000029422384000496D2218EAE20#1291729157140#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#######Thread[Thread-14,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#Plain###Administrator disconnected.#
#1.5 #C0000A6DA6020000000000003003E9260004971011F61348#1291995183437#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to EPDEV: Cannot authenticate the user.#
#1.5 #C0000A6DA6020001000000003003E9260004971013685470#1291995207718#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-23,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
#1.5 #C0000A6DA6020000000000007BF524600004975A15D3D2A8#1292313075882#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
KIndly advise on how to fix the problem.

SEM and Enterprise Portals with BW

Similar Messages

Maybe you are looking for