SEM:BCS - Copying Consolidated data from one version to another

Hi,
We have a situation where we do Consolidation of Forecast data. However this involves mixing Actuals data. For eg.
1) Q3 forecast would contain Q1 and Q2 as Actuals and Q3 and Q4 as Forecast
2) System has already done the consolidation for Q1 and Q2 lets say in version 0
3) Forecast is a different version eg. F1.
4) I want to be able to copy the Consolidated data of Q1 and Q2 from version 0 to version F1. Then load the data for Q3 and Q4 for forecast and perform consolidations for Q3 and Q4.
What I have seen in the system is -
a) You can copy only the non-consolidated data from one version to another and not for eg. Elimination entries etc.
b) This means that I have to perform consolidations in version F1 for quarters Q1 and Q2 again even though its already been done in the Actuals version (0).
c) Is there any way out of this. There is always the possibility that the consolidated data in Q1 and Q2 does not match between Actuals (version 0) and Forecast (F1)

Hi,
We had the same issue. In your solution you'll have to delete old (Q1 and Q2) forecast data and replace them by actuals. It's too problematic.
And you are absolutely right about possible inconsistency between actual and forecast data.
So, we've chosen another way.
We make separate consolidation in actual, budget, plan and forecast versions.
In plan and forecast we everything that is possible do periodically (including currency translation) -- to avoid the possible influence of historical data.
In a BEx query (and Excel workbook) level we retrive: N months of fact, forecast data for N1 month and a plan data for N2 month. After summing up all figures we have predicted (name it as forecast) data for N+2 months.
Of course, the actual, forcast and plan components are hidden in a report.
This is possible because, in plan and forecast we use turnovers (not balances) only. Even a balance sheet is produced without problems, not talking about P&L and Cash Flow.
Hope it helps.
Eugene

Similar Messages

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

Copying directory data from one server to another

Hi friends,
I maintain two directory server (ver. 5.2) with same domain (xxx.com) and i have to copy the entire data from one server.
I tried to export from a one server and import it on another server, but it didn't get copied and it is getting object class violation error,
Please give me some tips to copy the entire data along with password encryption, so the users should be able to login to the new server.
Regards,
Iqbal

Before you copy the data, make sure the new server has all user-defned schema (objectclass, attribute) which reside on the first server. What you can do is to copy the schema over first. Then you can copy the data over.

How to copy form data from one pdf to another?

Hi,
I have created a pdf, added form data to it. Saved the form data as a fdf file - all good.
I've updated the document and saved as a new pdf and would like to load the fdf data into it.
So I select tools - forms - more forms options, and press the "import" function - it goes grey and nothing happens.
If I re-open the document the import function remains greyed out.
I can find no way to import this data.... any ideas?
I've tried going into form edit mode - adding a new field. The import option is no longer greyed out so I click it and can select the fdf file hit open and ... the dialogue disappears and nothing happens.
Is my Acrobat XI 11.0.07 badly installed - or what?

You need to learn about the different types of PDFs. PDF/ A is an archive format that does not allow changes. PDF/X is used for graphics exchange
For forms I would use only the PDF with a target version. Do not use the Optimizer feature.
Forms always become larger due to the need to include the font for the various form fields. You might have to review the type fonts used by the form fields and one standard font as much a possible.
It is possible to use the FDF file to move field values from one PDF to another.
If you are trying to replace the underlying content and keep the form fields, use the replace pages.

Copy historical data from one material to another

I have added a new material in the planning hierarchy and need to copy historical data from an existing material to this new material.
For achieving the same I carried out below steps:
In the forecasting view of the new material I added the existing material as reference material: consumption, also added the reference plant, validity period and multiplier.
But then too system is not copying the historical data of that material to the new material..I cannot see any data in MC94 or in the infostructure.
Please let me know where am I going wrong or if I am missing any setting.....
Thanks in advance.
Regards,
Sonal

Dear ,
System will not copy the Reference material consumption to new material consumption -Total Consuption tab .If you maintain those filed like
1.Reference material consumption
2.Ref.Plant Consumptuion
3.Date To
4.Multipler
5.Similar Period Indicator -M/W ( some time if you maintain the frist 4 option but not same period indicator , system will not consider the consumption ) .
Based on the above set up , when you execute the Forecast ( Indiviaully -MM02-Forcaste Tab or MP38 collectively or through SOP) , forcast programme will use the historical values of Refe.Material and project the new material\s forcasted demand as per your forecast period ( 2 months or 3 motnhs etc ) in the forecasting view .
System will not copy the Historical valu to total consumption tab of the new material ok .
If you need to copy the consumption of old material to new material , you have to use report RMDATIND, MVER_DI or BAPI_MATERIAL_MAINTAINDATA_RT .For more details please refer the OSS Note 200547 - Program: Direct input for consumption values
More over why do you need to copy when u have facility to have refence in Forecasting view !
Just chek the above points wht i have mentioned and execute forecast .Do not forget to keep same period indicaotor-M/W what ever .
Test a sample and procced .
Hope it is clear .
Regards
JH
Edited by: Jiaul Haque on Jun 5, 2010 10:12 AM

Copy the data from one column to another column using @

I have two columns here - A and B.
Column A has a complicated formula that will generate results. I wanted the results in Column A to be reflected in Column B without pasting the A's formula in B. This will save me the trouble of editing formulas in more than 1 column if there is a need.
I saw somewhere that you can use "@" in column B but I have no idea how to use it.
Assumingly column A is the first column. I tried to insert '@1' in B's formula and change B's column properties' Data Format as "Treat Text as HTML". It does not work.
Please advise how I can do that.

So is there any way to copy the data in Column A into Column B without putting the same formula? something like in Excel where we put "=C1". Its not possible in BI as it comes in excel.....The only way is to create a duplicate column in RPD or Answers screen and incorporate the formula and giving different name to it.
whats the problem if you duplicate the column with same formula?....Ok still if you dont want to see identical just write some pseudo logic say
Duplicated column f(x) case when 1=0 then column_name else formula end.....so it appears different to see but it outputs same.
UPDATED POST
Dont create in RPD,you can create a dummy column in that report request and change the f(x) to the above case i mentioned by taking the column from columns button in edit formula screen so when ever you edit the actual column formula that would reflect in the dummy column also as it is replicating from original one.Try and see
hope helps you.
Cheers,
KK
Edited by: Kranthi.K on Jun 2, 2011 1:26 AM

Bundle to copy ntuser.dat from one profile to another

I was wondering if it was possible to create a bundle to solve the following issue.
It seems our windows 7 image contains an proxy setting in the default user profile so that every user logging on for the fist time (using DLU) gets this proxy set.
Is there a way to create a bundle to copy say ntuser.dat from the Administrator profile to the default user's profile without having to enable the see system files etc view.
Tom

Originally Posted by Tom Cummings
It seems our windows 7 image contains an proxy setting in the default user profile so that every user logging on for the fist time (using DLU) gets this proxy set.
Hi Tom,
I what you are looking for the clear out the IE proxy that has been set in the default user, as alternative to a copy you could also clear the setting in the default user hive.
Here's one example:
http://www.windows-noob.com/forums/i...-user-profile/
Originally Posted by windows-noob.com
@ECHO OFF
REM ************************************************** ***
REM Script configures the Default User Profile
REM ************************************************** ***
echo.
echo. Load default profile HIVE and apply registry settings.
echo.
REM Load the default profile hive
REG LOAD HKU\Default C:\Users\Default\NTUSER.DAT
REM Configure the default user profile
REM Customise Wallpaper Theme Screensaver etc.
REG IMPORT HKDUser\HKU_ControlPanel_Desktop.reg
REG IMPORT HKDUser\HKU_Themes.reg
REG IMPORT HKDUser\HKU_Software_MSWin_DWM.reg
REG IMPORT HKDUser\HKU_ControlPanel_Colors.reg
REG IMPORT HKDUser\HKU_ControlPanel_Cursors.reg
REM Unload the default profile hive
REG UNLOAD HKU\Default
exit
Cheers,
Willem

Possible to copy automation data from one project to another?

Hi
I have done some automation editing to a region in a project, and I would like to copy it to an identical region in another project. Is this possible?

I have not tried this method I'm now going to describe, but 'logic' dictates it should work:
1. In your donor project, open the *Automation Event List* , ctrl-⌘-E, then open a new Arrange window, ⌘-1. The new arrange window will now contain regions that only hold automation.
2. Go to *Logic Pro>Preferences>Audio>Devices>Coreaudio* tab and UNtick the Enabled box. (If you don't, each audio file and instrument will have to be reloaded each time you switch from one to the other project. That would drive anyone absolutely nuts.)
3. Now open the other project, get an Automation arrange window there, like in 1.
Now you should be able to copy/paste automation regions between the two projects.
Hope this works... I think that you need to set the playhead at the right position before pasting, but you'll have to figure that out yourself...
regards, Erik.

How to copy game data from one device to another

I downloaded Injustice: Gods Among Us onto an iPhone 5 and I wanted to have all of my save data copied onto the iPhone 5. The same iCloud account is used on both devices and I recently backed up my iPhone 4. I want to know how to copy (if there is a way) my game data onto the iPhone 5. Is there a way I can just copy the game data and nothing else to the iPhone 5?

There is no way to just copy the game data. Game data is saved as part of the backup, and the only way to transfer it is to restore the new phone from a backup of the old phone. Just remember, anything that you have done on the new phone since the backup of the old phone will be deleted.

How to copy table data from onde DB to another DB using clipboard

HI,
i copied table data from one DB to another DB, but it displays an error as "policy with check option violation" when inserting the table data.. so how to resolve the proble.. thanks in advance.

DECLARE
log_utl_dir VARCHAR2(100) :=('/apps/home/cmsftp/log/gaa');
CURSOR tb_compy_cur is
select tb.compy_acronym
-- QC 158113 - added below
,tb.ivr_plan_num
from tb_fc_compy tb,tb_xop_entitlements te
where tb.grant_award_accept_flag = 'Y'
and tb.ivr_plan_num = te.ivr_plan_num
and te.entitle_name = 'GAA_RECONCILED'
union all
select compy_acronym
-- QC 158113 - added below
,tb.ivr_plan_num
from tb_fc_compy tb
where tb.res_stock_flag = 'Y'
--and (tb.res_auto_lapse_flag = 2 OR
--tb.res_auto_lapse_flag = 3)
and exists (select entitle_name from tb_xop_entitlements te
where tb.ivr_plan_num = te.ivr_plan_num
and te.entitle_name = 'GAA_RES_FLAG'
and te.optionee = 'Y'
and te.psrep = 'Y'
and te.sponsor = 'Y'
and te.advisor = 'Y');
v_xopgrantz_insertcount NUMBER := 0;
-- QC 158113 - added below
v_xopgrantz_accpt_count NUMBER := 0;
v_user_id VARCHAR2(30);
insert_file_id UTL_FILE.FILE_TYPE;
insert_log_file varchar2(45) := 'xop_grantz_insertstats.log';
BEGIN
DBMS_OUTPUT.PUT_LINE('success1');
insert_file_id := UTL_FILE.fopen(log_utl_dir,insert_log_file,'w');
UTL_FILE.put_line(insert_file_id,'Starting the Process at '|| CURRENT_TIMESTAMP);
UTL_FILE.put_line(insert_file_id,'INSERTING ROWS FOR Companies turned on for GAA_RECONCILE and GAA/RESSTOCK');
for compy_rec in tb_compy_cur loop
v_user_id := 'CMS'||compy_rec.compy_acronym||'_USER';
ctx_set_session.set_user_session(v_user_id);
dbms_output.put_line ('success2'||''|| v_user_id);
INSERT into xop_grantz(grant_num,
user_id,
last_user_id,
restrict_grant,
child_symbol,
parent_grant_flag,
bulking_overide_flag,
exerrestrict_code,
rounding_method,
exercisiable_dt,
def_res_units_flag,
opt_gain_def_elig_flag,
opt_gain_deferred_flag,
opt_gain_deferred_dt,
opts_accepted,
lst_updtby_usercd,
accepted_type,
GAA_eligible,
GAA_LST_UPDTBY)
select g.grant_num,
v_user_id,
'GRNTACCPT',
'N',
'N',
(sel ect code
from tb_xop_exerrestrict_codes
where cash_allowed = 'Y'
and cashlesshold_allowed = 'Y'
and cashlesssell_allowed = 'Y'
and stockswap_allowed = 'Y'
and restricted_allowed = 'Y'
and sar_allowed = 'Y'
and cashmargin_allowed = 'Y'
and cashpartial_allowed = 'Y'
and sarsale_allowed = 'Y'),
NULL,
'N',
'N',
'N',
NULL,
NULL,
NULL,
'N',
NULL,
NULL
from grantz g
where not exists(select 1
from xop_grantz xg
where xg.grant_num = g.grant_num);
v_xopgrantz_insertcount := SQL%ROWCOUNT;
dbms_output.put_line ('1');
-- QC158113 - Optimisation fix--starts
DELETE FROM gt_xop_grant_accpt_type;
INSERT INTO gt_xop_grant_accpt_type
SELECT g.grant_num,e.ivr_plan_num,
pk_xop_grntaccpt.fn_get_accpt_type (v_user_id,
g.plan_num,
g.grant_dt,
g.opt_num,
g.grant_cd,
g.plan_type,
'Y'
FROM grantz g,tb_xop_entitlements e
WHERE plan_type IN (2, 4, 5, 7, 8)
and g.user_id = v_user_id
and e.ivr_plan_num = compy_rec.ivr_plan_num
and entitle_name = 'GAA_RES_FLAG' ;
dbms_output.put_line ('success3');
v_xopgrantz_accpt_count := SQL%ROWCOUNT;
UTL_FILE.put_line(insert_file_id,'Inserted count in gt_xop_grant_acceptance '|| v_user_id||v_xopgrantz_accpt_count);
-- QC158113 - Optimisation fix--ends
COMMIT;
UTL_FILE.put_line(insert_file_id,'Inserted count in XOP_GRANTZ for USER_ID '|| v_user_id||v_xopgrantz_insertcount);
ctx_set_session.set_user_session('');
dbms_output.put_line ('process completed');
end loop;
UTL_FILE.fclose(insert_file_id);
EXCEPTION
when others then
rollback;
dbms_output.put_line ('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||'INSERTING into xop_grantz for ALL grants');
END;
i received this error when running the procedure also, so the table gt_xop_grant_accpt_type is not populated
{Code -28115:ORA-28115: policy with check option violation at CMSFB_USER .pr_xopgrantz_insert}

Partitioning two Years Of Data From One Cube Yo Another

Hi Experts,
Can any one please help me on the following issue.
I got the requirement where I need to copy the data from one cube to another having unequal number of dimensions.
I have achieved this using Transparent partitioning, But I could be able to copy only one year data.
In cube1 I have the months like Jan, Feb...Dec and in cube2 I have the structure like Jan-11..Dec-11, Jan-12...Dec-12.
While creating the partition how can I map the Jan with Jan-11 and Jan-12.
Thanks In Advance,
Ram

You can map manually. it is possible.

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

How to copy from one Version to Another version with single click

Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
Viswanath

Hi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim

How to copy data from one table to another (in other database)

Hi. I would like to copy all rows from one table to another (and not use BC4J). Tables can be in various databases. I have already 2 connections and I am able to browse source table using
ResultSet rset = stmt.executeQuery("select ...");
But I would not like to create special insert statement for every row . There will be problems with date formats etc and it will be slow. Can I use retrieved ResultSet somehow ? Maybe with method insertRow, but how, if ResultSet is based on select statement and want to insert into target table? Please point me in the right direction. Thanks.

No tools please, it must be common solution. We suceeded in converting our BC4J aplication to PostgreSQL, the MSSQL will be next. So we want to write simple aplication, which could transfer data from our tables between these 3 servers.

Copying data from one table to another table thru java

Hi
I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
TIA

Cross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839

SEM:BCS - Copying Consolidated data from one version to another

Similar Messages

Maybe you are looking for