SEM BPS Retractor post wrong decimals in R/3

Hi All, we are implementing SEM-BPS for Sales planning and retracts back to COPA. The currency we are using now is KRW and it has been set as 0 decimals in TCURX table in both BW and R/3.
The BW and SEM layout displayes the correct figures. However, when retracted to R/3, COPA displayed the figure multiplied by 100. We are really puzzled why so... but when we do debug in the KELR tansaction, seems that they are passing the DB values to R/3 and then multiplied by 100 before posting into the DB in R/3... probably due to the 0 decimals set as well in R/3 KRW currency.
Anyone has any idea?
thanks

Hello,
We are doing something similar except that we are retracting from BW back to ECCS via transaction CX7B3. We are experiencing the same type of problem when sending data to R/3 for amounts whose currency exists in the TCURX exception table.
Would anyone know of an OSS Note to fix this retractor similar to the note Marc Bernard found (or more likely coded himself) for the COPA retractor?
Any help would be appreciated!
Thanks.

Similar Messages

How to do a Retractor to send data from SEM-BPS to R/3

Hi Folks!
Can someone say to me how to do a Retractor, step by step, to send data from SEM-BPS to R/3.
Thanks a lot in advance for your input!
Rocío.

Hi Thorsten,
Yes, I know it. But I didn´t want make it make through queries.
I have read than for CO-PA there are standard functions that send the data to R/3, but I cannot make they work to me.
And in addition I will need to also create other Retractors for RRHH, and there are not standard functions.
For that reason I needed know how to create a Retractor step by step.
Regards,
Rocío.

SEM-BPS Production Support

HI Friends,
Can u suggest me the SEM-BPS 'Production Issues' Documentation, or what r the major issues & Solutions in SEM-BPS Production Support,when we r dealing with extractors and retractors and Fox formulas, Thanking u.

Have you tried posting to th eBusiness Planning forum which is focused on SEM/BPS? It's under the Business Intelligence category.

Webinar: Business Planning in SAP BW - The SEM-BPS transition to BW-BPS

SAP NetWeaver Know-How Network Webinar:
Business Planning in SAP BW - The SEM-BPS transition to BW-BPS
Wednesday 14 July 2004
11 a.m. EDT
On Wednesday 14 July, Lori Vanourek, a NetWeaver BI RIG Consultant, hosts the webinar titled Business Planning in SAP BW - The SEM-BPS transition to BW-BPS as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Lori describes her webinar presentation:
Business Planning is an integral part of SAP NetWeaver '04. Join us as we share SAP's product roadmap for business planning and discuss the transition of BPS from SAP SEM to SAP NetWeaver '04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720149.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello Marc and Sander,
I checked the document status and tested the link myself using a PC external to the SAP environment and did not have any problem. You do have to be logged in to do this. If you are not, you should see a page that will appear which says that a login is required to use that feature. On some occassions, users see an error message instead. I apologize for that.
Kind Regards,
David

SEM-BPS Real times issues

Hi Gurus,
I'm new to SEM-BPS Real times issues also some interview questions on SEM BPS. How we want to answer please forward to my email id: [email protected]
thank regards
Suresh

Have you tried posting to th eBusiness Planning forum which is focused on SEM/BPS? It's under the Business Intelligence category.

Convert SEM-BPS Web Templates to PDF

Hi everyone, one of my clients is requesting to convert all his SEM-BPS 3.5 Web Templates to PDF files dynamically.
I've already make a research on SDN an found several post about converting ABAP objects to PDF format (like <a href="/people/sap.user72/blog/2004/11/10/bsphowto-generate-pdf-output-from-a-bsp).
The thing is that I'm not an ABAP guy, my expertise is on JAVA.
I've just want to know if any of you have already found a successful alternative method to convert these web templates on PDF files using any Java techniques available.
Thanks for your help.

Hi Wulfrano,
we do not have this functionality. However, you can easily get a PDF for any HTML page. Check out for example CutePDF: http://www.cutepdf.com/
Regards,
Marc
SAP NetWeaver RIG

Requesting the relevant links for step-by-step or TAB'S for SEM-BPS

Hello Pro's,
Greetings for all.
I am surendra. I am working as a bw consultant since 2years. Now I want to learn SEM -BPS. i am exploring SDN to learn SEM-BPS, but it is very complicated to understand.
I request you to suggest ease method to learn the sem-bps and also if any materials like step-by-step or TAB'S.
please post the relevant links for step-by-step or TAB'S.
Thanks,
suri

Hi Surendra,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation. Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
Also check this too
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

Analysis Authorization with SEM-BPS

Hi,
We have performed technical upgrade from BW 3.5 to BI 7.0. We want to migrate to BI 7.0 functionality phase wise.
We have SEM-BPS and now we want to migrate to Analysis Authorization of BI 7.0.
Once we have igrated to Analysis Authorization, will there be any impact on SEM-BPS? Can we still use SEM-BPS with New Analysis Authorizations? We do not want to move to BI-IP in near future?.
Please advise.
Best Regards,
UR

Dear UR,
Iu2019m going to try helping you,
In difference of reporting functionality, in planning, the data of an InfoCube is not just read; it is also changed or created.
There are two planning tools in BI: BW-BPS (Business Planning and Simulation), and BI Integrated Planning.
There are two main tcode: BPS0 and RSPLAN
There are three authorization objects to manage Integrated Planning:
S_RS_PL_ADMIN - Planning Administrator
S_RS_PL_PLANNER u2013 Planner
S_RS_PL_PLANMOD_D u2013 Planning Modeler (Development System)
The main object in the planning scenario is InfoCube real-time, where can available writing in small package that arrive in parallel. In some cases the security requirements for reporting and planning can be merging. In this case you need authorization object for checking planning, as authorization object above, and you need authorization object for using a query for planning requires as S_RS_COMP.
In addition to authorization for displaying data, the authorizations for changing data you need analysis authorization (the analysis authorization focus in the InfoProvider, no in Aggregation Level).
In your analysis authorization design for reporting stuff, you should use in 0TCAACTVT characteristic 03 value. In the planning stuff, you should use in 0TCAACTVT characteristic 03 and 02 values. As explain following:
Using the characteristics 0TCAACTVT (activity), you can restrict the authorization to different activities. Read (03) is set as the default activity; you must also assign the activity Change (02) for integrated planning.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/frameset.htm
I hope this suggestion can help you answer question,
Luis

BW SEM-BPS API functions from a Web Dynpro project in Netweaver

Hi,
Rather than using the standard Web Interface Builder in BW SEM-BPS (3.1B), we have to use SAP Netweaver to create a Web Dynpro project which accesses all the API_SEMBPS functions, such as GETDATA, SETDATA, FUNCTION_EXECUTE etc. Has anyone done this before? If so, do you have any examples, hints?
Regards,
Linda Lee

Hello Linda,
let me add some more remarks on this topic from the BW-BPS development perspective:
I completely agree with Marc's statement.
Thechnically it is possible to build a planning application UI on top of the BW-BPS API functions and we have some customers that are live with such a solution. However, I would recommend this only in 2 cases
1. You need to create a tightly integrated application with BPS being only one part of several other components (including transactional UI, e.g. running against a CRM system).
2. You prefer a UI technology that is not provided by SAP (e.g. Java Swing based).
In all other cases, I would say that one should stick to the Web Interface created with Web interface Builder, mainly for cost reasons. If this tool does not fulfill all your needs there are several possibilities to enhance and extend the generated web interfaces by custom specific coding (see also several How-To guides in this area; e.g. "How to integrate a BEx Web Template into a BPS Web interface").
Another possibility is to loosly couple several web UIs with the help of the portal.
To my knowledge, it is not true that BSP web technology will be obsolete shortly.
In general, I would always prefer a tool supported, model driven approach compared to a heavy custom coding. This is also in sync with SAPs general strategy to a more pattern based approach to create UIs.
Regards,
Tobias Hagen
Dev. Manager BW-BPS
SAP NetWeaver BI

Function types for Balance Sheet Planning missing in SEM-BPS 6.0

Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
SAP_BASIS 700 0013 SAPKB70013 SAP Basis Component
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D PI_BASIS 2005_1_700
ST-PI 2005_1_700 0005 SAPKITLQI5 SAP Solution Tools Plug-In
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
FINBASIS 600 0010 SAPK-60010INFINBASIS FINBASIS 600 : Add-On Supplement
SEM-BW 600 0010 SAPKGS6010 SEM-BW 600 : Add-On Supplement
BI_CONT 703 0007 SAPKIBIIP7 Business Intelligence Content
Message was edited by:
 Lars B Rasmussen

Hi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK

SEM BPS - Planning function to distribute total value over months

Hello,
We use SEM BPS. In fact we use the integration of SEM BPS in the CRM opportunity component as opportunity planning.
Now we want to distribute the total value of certain key figures over the months. Either equal distribution or increasing distribution like 1% increase every month. What would be the best way to do that with a planning function?
We need to take into account that the number of months depends on the start and end date of the transaction (opportunity).
Best regards,
Thomas

Hi Thomas,
I would probably create a fox formula, do a foreach in selection loop over the months and distribute the values within that formula.
If you want to use a standard distribution function, you need to create the reference data somewhere before, which could be a bit difficult if the timeframe changes according to user selections.
regards
Cornelia

Report on process chains using SEM-BPS

We are looking to develop a tool to:
1. Monitor data loads at the process chain level
2. Within in the same tool, enter error resolution /
action steps for all failed loads
3. Report out % of successful or failed loads, using the data captured by the tool.
We have studied the BW Tables rspcchain, rspcchainattr, rspclogchain, rspcprocesslog, rspclogs, rseventchain and
rspcchaint.
We are considering the following options:
1. Develop an ABAP report and allowing the process chain monitor to manually enter the error resolutions (Perhaps in a Z-Table)
2. Create an InfoCube in BW using the above tables and then write a query, but we can not allow the user to enter error resolutions in the query.
3. Create a transactional infocube in SEM-BPS using the above tables and use the input functionality of tansactional infocube to facilitate the error resolution report entry.
Can anyone suggest any alternate solution, or has anyone encountered similar requirement on project?
One more doubt to check: is there any way to create an infoobject with CHAR type to enter data with 1000 or more characters? Or is there any other alternative solution to it? The doubt is to take care of the text entry for the error resolution.
Milind Vad

Just some thoughts:
Have you considered using document service in BW or even KM (Portal) technology rather than CHAR 1000+ fields? This would give you more flexibility also on the type of document.
For loading there are monitors available (based on tables like RSMONMESS). If you are interested in loads only (and not other process types), maybe using information from the BW load monitor could be beneficial (like RSMONMESS) rather than the process chain stuff.
Maybe it's even worth having an InfoObjekt with a resolution code that links to a document describing the resolution with a key and whenever there is a new solution available create a new key with a new document. That would be most beneficial for reporting (like how many times has this problem / resolution occurred and the like).
Regards, Klaus

Manual data change in SEM-BPS

Hello,
Dos somebody know how to find possibility of manual data change in the planning layout of SEM-BPS?
Thanks for answers.

Hello Svetlana,
When you meant "to add new (or change existing) data in a planning layout, you have to make use of the function module
API_SEMBPS_SETDATA.
The parameters what you have to pass are:
1) Planning area
2) Planning level (where your layout is defined)
3) Planning package
4) Planning Laoyut
5) Characteristic values of each row
Check the documentation of the Funtion Module (CTRL+F4).
1) Be sure to convert the key figure values in string format, otherwise you would get a runtime error.
2) Make sure that no two rows have same keys (characteristic value tuples)
3) Make sure that all the characteristic values are contained in the planning level (Check the filters)
A simple working example (ABAP Code) you have it from me when things dosen't go forwards.
Thanks and Good Luck!

Integrated planning Content and SEM-BPS Content

Hi Experts
Is there any integrated planning Business Content for CRM? Where do I find it?
SEM-BPS has Business Content planning scenarios for CRM. Is this BC also available in BW-BPS now? Where do I find it?
We use NW04s BI and CRM 5.0.
Kind regards
Erik

Hello Erik,
as of now I have not heard of such content.
Also SAP is not talking about CRM-content for BIIP yet. What we have learned is that a lot effort is put into making the system stable and going for "additional" functionalities like BC later.
What you could do is use BW-Business Content for CRM as far as possible (InfoCubes etc. ) and build the Aggregation Levels, Queries & Templates by yourself.
Hope this helps
Daniel

SEM - BPS

Hi Folks,
I am thinking that going forward SEM-BPS will be part of BW and SEM will not have any BPS. Is this true? Can some one point me to the document which says about this. I need to present that document for the client.
Thanks in advance,
Trinadha

Trinadha,
please check the SAP Service Marketplace:
http://service.sap.com/bw > SAP BW-BPS
There's plenty of information about this topic.
Regards,
Marc
SAP NetWeaver RIG

SEM BPS Retractor post wrong decimals in R/3

Similar Messages

Maybe you are looking for