SEM - BPS
Hi Folks,
I am thinking that going forward SEM-BPS will be part of BW and SEM will not have any BPS. Is this true? Can some one point me to the document which says about this. I need to present that document for the client.
Thanks in advance,
Trinadha
Trinadha,
please check the SAP Service Marketplace:
http://service.sap.com/bw > SAP BW-BPS
There's plenty of information about this topic.
Regards,
Marc
SAP NetWeaver RIG
Similar Messages
-
Analysis Authorization with SEM-BPS
Hi,
We have performed technical upgrade from BW 3.5 to BI 7.0. We want to migrate to BI 7.0 functionality phase wise.
We have SEM-BPS and now we want to migrate to Analysis Authorization of BI 7.0.
Once we have igrated to Analysis Authorization, will there be any impact on SEM-BPS? Can we still use SEM-BPS with New Analysis Authorizations? We do not want to move to BI-IP in near future?.
Please advise.
Best Regards,
URDear UR,
Iu2019m going to try helping you,
In difference of reporting functionality, in planning, the data of an InfoCube is not just read; it is also changed or created.
There are two planning tools in BI: BW-BPS (Business Planning and Simulation), and BI Integrated Planning.
There are two main tcode: BPS0 and RSPLAN
There are three authorization objects to manage Integrated Planning:
S_RS_PL_ADMIN - Planning Administrator
S_RS_PL_PLANNER u2013 Planner
S_RS_PL_PLANMOD_D u2013 Planning Modeler (Development System)
The main object in the planning scenario is InfoCube real-time, where can available writing in small package that arrive in parallel. In some cases the security requirements for reporting and planning can be merging. In this case you need authorization object for checking planning, as authorization object above, and you need authorization object for using a query for planning requires as S_RS_COMP.
In addition to authorization for displaying data, the authorizations for changing data you need analysis authorization (the analysis authorization focus in the InfoProvider, no in Aggregation Level).
In your analysis authorization design for reporting stuff, you should use in 0TCAACTVT characteristic 03 value. In the planning stuff, you should use in 0TCAACTVT characteristic 03 and 02 values. As explain following:
Using the characteristics 0TCAACTVT (activity), you can restrict the authorization to different activities. Read (03) is set as the default activity; you must also assign the activity Change (02) for integrated planning.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/frameset.htm
I hope this suggestion can help you answer question,
Luis -
BW SEM-BPS API functions from a Web Dynpro project in Netweaver
Hi,
Rather than using the standard Web Interface Builder in BW SEM-BPS (3.1B), we have to use SAP Netweaver to create a Web Dynpro project which accesses all the API_SEMBPS functions, such as GETDATA, SETDATA, FUNCTION_EXECUTE etc. Has anyone done this before? If so, do you have any examples, hints?
Regards,
Linda LeeHello Linda,
let me add some more remarks on this topic from the BW-BPS development perspective:
I completely agree with Marc's statement.
Thechnically it is possible to build a planning application UI on top of the BW-BPS API functions and we have some customers that are live with such a solution. However, I would recommend this only in 2 cases
1. You need to create a tightly integrated application with BPS being only one part of several other components (including transactional UI, e.g. running against a CRM system).
2. You prefer a UI technology that is not provided by SAP (e.g. Java Swing based).
In all other cases, I would say that one should stick to the Web Interface created with Web interface Builder, mainly for cost reasons. If this tool does not fulfill all your needs there are several possibilities to enhance and extend the generated web interfaces by custom specific coding (see also several How-To guides in this area; e.g. "How to integrate a BEx Web Template into a BPS Web interface").
Another possibility is to loosly couple several web UIs with the help of the portal.
To my knowledge, it is not true that BSP web technology will be obsolete shortly.
In general, I would always prefer a tool supported, model driven approach compared to a heavy custom coding. This is also in sync with SAPs general strategy to a more pattern based approach to create UIs.
Regards,
Tobias Hagen
Dev. Manager BW-BPS
SAP NetWeaver BI -
Function types for Balance Sheet Planning missing in SEM-BPS 6.0
Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
SAP_BASIS 700 0013 SAPKB70013 SAP Basis Component
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D PI_BASIS 2005_1_700
ST-PI 2005_1_700 0005 SAPKITLQI5 SAP Solution Tools Plug-In
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
FINBASIS 600 0010 SAPK-60010INFINBASIS FINBASIS 600 : Add-On Supplement
SEM-BW 600 0010 SAPKGS6010 SEM-BW 600 : Add-On Supplement
BI_CONT 703 0007 SAPKIBIIP7 Business Intelligence Content
Message was edited by:
Lars B RasmussenHi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK -
SEM BPS - Planning function to distribute total value over months
Hello,
We use SEM BPS. In fact we use the integration of SEM BPS in the CRM opportunity component as opportunity planning.
Now we want to distribute the total value of certain key figures over the months. Either equal distribution or increasing distribution like 1% increase every month. What would be the best way to do that with a planning function?
We need to take into account that the number of months depends on the start and end date of the transaction (opportunity).
Best regards,
ThomasHi Thomas,
I would probably create a fox formula, do a foreach in selection loop over the months and distribute the values within that formula.
If you want to use a standard distribution function, you need to create the reference data somewhere before, which could be a bit difficult if the timeframe changes according to user selections.
regards
Cornelia -
Webinar: Business Planning in SAP BW - The SEM-BPS transition to BW-BPS
<b>SAP NetWeaver Know-How Network Webinar:
Business Planning in SAP BW - The SEM-BPS transition to BW-BPS
Wednesday 14 July 2004</b>
<b>11 a.m. EDT</b>
On Wednesday 14 July, Lori Vanourek, a NetWeaver BI RIG Consultant, hosts the webinar titled <b>Business Planning in SAP BW - The SEM-BPS transition to BW-BPS</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Lori describes her webinar presentation:
Business Planning is an integral part of SAP NetWeaver '04. Join us as we share SAP's product roadmap for business planning and discuss the transition of BPS from SAP SEM to SAP NetWeaver '04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
<b>How to Participate</b>
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720149.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
<b>About the SAP NetWeaver Know-How Webinar Series</b>
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
<b>Disclaimer</b>
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.Hello Marc and Sander,
I checked the document status and tested the link myself using a PC external to the SAP environment and did not have any problem. You do have to be logged in to do this. If you are not, you should see a page that will appear which says that a login is required to use that feature. On some occassions, users see an error message instead. I apologize for that.
Kind Regards,
David -
Report on process chains using SEM-BPS
We are looking to develop a tool to:
1. Monitor data loads at the process chain level
2. Within in the same tool, enter error resolution /
action steps for all failed loads
3. Report out % of successful or failed loads, using the data captured by the tool.
We have studied the BW Tables rspcchain, rspcchainattr, rspclogchain, rspcprocesslog, rspclogs, rseventchain and
rspcchaint.
We are considering the following options:
1. Develop an ABAP report and allowing the process chain monitor to manually enter the error resolutions (Perhaps in a Z-Table)
2. Create an InfoCube in BW using the above tables and then write a query, but we can not allow the user to enter error resolutions in the query.
3. Create a transactional infocube in SEM-BPS using the above tables and use the input functionality of tansactional infocube to facilitate the error resolution report entry.
Can anyone suggest any alternate solution, or has anyone encountered similar requirement on project?
One more doubt to check: is there any way to create an infoobject with CHAR type to enter data with 1000 or more characters? Or is there any other alternative solution to it? The doubt is to take care of the text entry for the error resolution.
Milind VadJust some thoughts:
Have you considered using document service in BW or even KM (Portal) technology rather than CHAR 1000+ fields? This would give you more flexibility also on the type of document.
For loading there are monitors available (based on tables like RSMONMESS). If you are interested in loads only (and not other process types), maybe using information from the BW load monitor could be beneficial (like RSMONMESS) rather than the process chain stuff.
Maybe it's even worth having an InfoObjekt with a resolution code that links to a document describing the resolution with a key and whenever there is a new solution available create a new key with a new document. That would be most beneficial for reporting (like how many times has this problem / resolution occurred and the like).
Regards, Klaus -
Hello,
Dos somebody know how to find possibility of manual data change in the planning layout of SEM-BPS?
Thanks for answers.Hello Svetlana,
When you meant "to add new (or change existing) data in a planning layout, you have to make use of the function module
<b>API_SEMBPS_SETDATA.</b>
The parameters what you have to pass are:
1) Planning area
2) Planning level (where your layout is defined)
3) Planning package
4) Planning Laoyut
5) Characteristic values of each row
Check the documentation of the Funtion Module (CTRL+F4).
<b><i>1) Be sure to convert the key figure values in string format, otherwise you would get a runtime error.
2) Make sure that no two rows have same keys (characteristic value tuples)
3) Make sure that all the characteristic values are contained in the planning level (Check the filters)</i></b>
A simple working example (ABAP Code) you have it from me when things dosen't go forwards.
Thanks and Good Luck! -
Integrated planning Content and SEM-BPS Content
Hi Experts
Is there any integrated planning Business Content for CRM? Where do I find it?
SEM-BPS has Business Content planning scenarios for CRM. Is this BC also available in BW-BPS now? Where do I find it?
We use NW04s BI and CRM 5.0.
Kind regards
ErikHello Erik,
as of now I have not heard of such content.
Also SAP is not talking about CRM-content for BIIP yet. What we have learned is that a lot effort is put into making the system stable and going for "additional" functionalities like BC later.
What you could do is use BW-Business Content for CRM as far as possible (InfoCubes etc. ) and build the Aggregation Levels, Queries & Templates by yourself.
Hope this helps
Daniel -
Hi Gurus,
I am new to BW, and SEM BPS. Please can provide some documentation on SEM BPS which gives some kind of basic ideas and Best Practice.
Thanks in advans...
Regds
SamHi,
following one will be useful for you..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
Also kindly send an email to [email protected]
. I read in one of the forums (Need SEM - BPS Material and Guidance) that he is currently working in SEM-BPS. He should ne able to hel you a lot in this regard.....
Good Luck!!!
Thanks,
Raj -
hi all i am bw cunsultant and now i am coming into SEM bcs-bps can someone help me out how should i start to learn.
if someone has the documnets please send to me
[email protected]
i shall then very thank full for youHi Sanjeev,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently%20asked%20questions%20-%20planning%20with%20sap%20netweaver%20bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi -
Are SEM BPS and BW BPS identical in terms of the functionality that they offer? If not what are the constraints and is one a limitation of the other? Thanks
hi,
SEM-BPS has some additional financial functions and different business content.
take a look :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements bw-bps formerly sem-bps in sapnetweaver 04.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently asked questions - planning with sap netweaver bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
and threads
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
hope this helps. -
HI FRIENDS,
I HAVE KNOWLEDGE IN BW, I WOULD LIKE TO LEARN SEM-BPS AND BCS . I HAVE KNOWLEDGE IN SD PP AND MM . FOR SEM-BPS, BEC NEED ANY EXTRA KNOWLEDGE IN ANY OTHER MODULES, CAN I GET ANY SCREEN SHOTS MATERIAL FOR SEM- BPS AND BCS LIKE BOOK IS THER FOR BW STEP BY STEP, CAN I GET ANY BOOK FOR SEM -BPS AND BCS. PLE MAIL ME ASAP.
CAN ANY ONE SEND ME MATERIAL SEM-BPS AND BCS . TO MY ID
<removed>
Thanking u
suneel.Hi Suneel,
If you are very good at BW, then obviously you can go ahead and learn BPS. As SEM is a planning tool within SAP and planning mainly involves financial planning. Its better if you are good at the processes of FI-CO before learning BPS, CPM and BCS.
Regards
Ravi -
Hi Friends,
I would like to produce
1. Rolling Forcast,
2. Buget,
2. 10 Year plan ,Quaterly Annual basis
with multiple views,
By Product (Revenue, margin,direct cost)
By Customer(Revenue,Margin,Direct Cost).
I presume i will be producing these reports by SEM-BPS, but in dilemma whether it will be BW-BPS, and also to work on SEM-BPS do we have to have BI 7.x?
I would be very grateful if anyone can guide me in best possible way.
Many Thanks
ImranHi Bhanu,
Thanks for your help,
1. Which version these reports should be developed in Query designer , It can suppurt only 7.x?
2. Once i create a report in Query designer how can i assign it to the BPS Layout.
Thanks in advance for your help
Best Wishes
Imran -
Hi Everyone,
can anyone guide me one the diffrence between the BW BPS and SEM BPS . Please do guide me if there is any site /link that provide the above informationHi
From netweaver 2004 i.e BW3.5 BPS is integrated with BW and called as BW-BPS, prior to this it is part of SEM and called as SEM-BPS
go through this previous thread on similar query
BW-BPS and SEM_BPS
and this Release Notes for SAP NetWeaver '04
Business Information Warehouse
http://help.sap.com/saphelp_nw04/helpdata/en/5d/3c51403ab46f13e10000000a1550b0/RN_BW_EN.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt#275,21,New functionalities delivered in SEM Support Packages
will give u clear idea
Regards
Kiran
Message was edited by: ravi kiran naalla
Maybe you are looking for
-
wanted to create an RFC between BW and EP and i am getting an error in BW when checking an RFC between BW and EP. Connection Error Error when opening an RFC connection Program STEEP_PORTAL not registered SAP-Gateway on host stebw/sapgw00 DETAIL:TP ST
-
Error in starting an EAR containing EJBs : Unable to prepare EJB
I am using ANT build script to create and deploy EAR on WAS server. This EAR file packages EJB jar file inside it. I am using WAS 5.1.1 Test Environment from IBM RAD 6.0. When deployment is done, the application is not in Started status. If I try to
-
Networking a Mac and a pc to share internet.
Hello, I have a pc that is running a wireless connection using windows xp and I have a Mac running Leopard. I have them connected but I would like to use the internet on my Mac through the pc. Does anyone know what I need to do to set this up. I have
-
FCE HD is splitting my footage but I don't want it to
I am importing HD footage to my hard drive, and I don't want the video to be split. FCE is automatically splitting the imported footage even though there aren't any breaks in the video. It is splitting the video in the middle of a scene. How do I cha
-
Can I set public permissions for the Training Catalog?
We want to have all users be able to get into the Training Catalog and self enroll. We have over 7,000 employees with no distribution list for all people. How do I set permissions for all employees to see the training catalog and self enroll?