SEM-BW component Upgrade to Level 4

Hi,
We are in SAP_BW release 701 Level 3. We are upgrading SEM-BW component from 604 level 2 to Level 4.
Do SAP_BW has to be upgraded to Level 4 too??
What are the pros and Cons of Upgrading to SEM-BW 604 level 4?
Regards
Rob

Hi,
Elements will be adjusted after the upgrade.
As you already on 7.0. so dtp and transformations will be the same. some 7.4 relates functions will be enabled.
To know the more information about upgrade to 7.4, please check on Google you may get discussed threads or sap notes.BW 7.4
Thanks

Similar Messages

Semi-automatic update/upgrade; is Arch wrong distro for these boxen?

I wanted to post here a semi-automatic update/upgrade solution I--with a lot of help from someone more knowledgeable--came up with in case it might be of benefit to anyone else. It's been working pretty well for me over the course of the last couple of weeks and should aid me in becoming a better Archer. I also want to ask in this thread for confirmation on whether installing Arch on a couple of machines I have that see fairly intermittent use is inadvisable: if so, I'll look into installing some other distro. First the semi-automatic update solution.
To begin with, what do I mean by "semi-automatic?" Mainly I mean something that's only partially automatic. See, I've come to understand that automating updates/upgrades is a bad idea©™. And I think I understand why. Still, I apparently lack the discipline to be a good Archer, upgrading/updating frequently so as to conform with the philosophy. So I thought I should use my computer to help me be more disciplined: that's partly what they're for, after all, isn't it?
I decided I might make the computer help me be more disciplined, first of all, by making it issue reminders at frequent, regular intervals, that it is time to update/upgrade. Of course cron came immediatelty to mind as part of the solution, though I ended up using the remind program instead. In any case, it seemed like a solution that, not only would remind me at regular, frequent intervals would be desireable, but one that would at the same time initiate the process, would be even better. I thought it must be possible to, for example, cause a terminal to open with a message and corresponding menu that would say something like "System update/upgrade needed: proceed now? 1. Yes 2. No"
This latter would be one of the elements that makes the solution semi-automatic (as opposed to automatic). Answering 2. in that terminal would cause the terminal to simply exit. Answering 1., on the other hand, runs the command sudo pacman -Syu. There is a further level of semi-automation at this stage: you are then prompted to enter the root password before pacman -Syu will run. So, no updating/upgrading happens without input at these two stages.
I should mention as I wrap up this description of my solution that there is yet another important element to it that, while independent of it, is nonetheless related: I subscribed some weeks ago to the Arch news RSS feed. I check that daily, so an even further level of semi-automation is in play here.
This seems to me like it will be a very good solution to bringing my behavior into better conformity with the Arch philosophy. It's worked well so far. That said, I'm certainly open to criticisms. I'm also very open to any improvements that might be suggested. Without further ado, here is the script I run every other day from the remind daemon:
#!/bin/bash
PS3='Begin full system upgrade? '
options=("Yes" "No")
select opt in "${options[@]}"
do
case $opt in
"Yes")
echo "Beginning full system upgrade..."
sudo pacman -Syu
exit
"No")
exit
echo "Please choose the corresponding number"
esac
done
Now, to my question about my other machines as possible Arch install targets. The above applies to the desktop machine in my apt. which is almost always powered on and connected to the 'net: what follows applies to two different machines.
One is a laptop that I use primarily when I travel. It often sits powered off for 1-2 months between uses. The other is an alternate desktop machine in my apt. that is also infrequently used: essentially, when both the wife and I want to work on-line separately--which is not all that frequently (she prefers knitting to computing during her time at home)--it gets fired up. Again, it often sits for 1-2 months without being used.
Now, it seems to me these machines are poor targets for an Arch install because they are far more frequently off-line than on-line, powered down than powered up. Thus they are very unlikely to be updated/upgraded on any kind of regular basis, and certainly never regularly and frequently, as seems to be recommended for Arch machines.
Am I correct in assuming I should be looking for some other distro to install on these infrequently-used machines?
Thanks,
James
Last edited by jamtat (2013-02-11 22:50:09)

I like pacmatic (as suggested at https://wiki.archlinux.org/index.php/Pa … _pacmatic). What is supposed to be wrong with it?
It doesn't ignore updates, by the way. It does two things. First, it checks the news and tells you about important news items as soon as you run e.g. pacmatic -Syu. Then it runs the upgrade in the normal way. For example, a news item today concerned lvm2, dev-mapper and linux being upgraded together. It gave me the news item. Then it did the usual paman upgrade routine and upgraded everything, including those packages. Second, every time you run it, it reminds you of any *.pacnew files you haven't dealt with and asks if you want to deal with them now. At least, it asks about most. It never mentions kdmrc.pacnew for some reason.
It's just a wrapper for pacman. From the script:
Pacmatic is a pacman wrapper that takes care of menial but critial tasks.
These include
Checking the archlinux.org news
Summarizing the arch-general mailing list
Reminding if it has been a while since the last sync
Reporting pacnew files
Editing pacnew files
Personally, I've installed an alternative distro on machines which I'm not sure I will be using very regularly. (Also, I like having distinct distros just in case something goes wrong in one case - even if it is a bit of a faff sometimes.)
Last edited by cfr (2013-02-13 01:49:24)

PI_BASIS component upgradation

Hi
    We have the requirement of upgrade the PI_BASIS component from 2005_1_700 level 009 to 2006_1_700 level 000 .
What are the pre-requisite and how to upgrade this?
             Due to low level of PI_BASIS component we are getting errors in Development.
Best Regards
Srikanth

Thanks Subash,
                                 One more issue, I have found 3 files in support pack add-on regarding PI_BASIS 2006_1_700.
i.e 1. installation, 2.upgrade , 3. installation and Upgrade.
Which file I can download ? I would like to upgrade from PI_BASIS 2005 to PI_ BASIS 2006 ?
Thanks
Srikanth

Component BI_CONT: SP level 0001 is incorrect, expected 6

Hello!
I faced with problem after installed the Solution Manager 7.01 (with SP26)
In step INSTALLATION CHECK on the Diagnostics Prerequisites I get status "Activity Error" with explanation
Component BI_CONT: SP level 0001 is incorrect, expected 6
May be somebody know what I need do?
Or I can do some steps to resolved this problem?
Best regards
Dmitry Zakharenkov

Hi
Please verify the solution manager met all the prerequest specified in the note for ur SP level
[Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP26|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1274287]
if no, please make them equal to the note
and if yes, you can check the fix in the note avoid the activity error
[ Note 1297598 - Fix in prerequisite|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1297598]
Jansi

Upgrading patch level in ITS

Hi Friends,
I need to upgrade patch level from 28 to 33 as recommended by SAP ,so how to upgrade the patch and what needs to be taken care
We need to apply because of we are facing some XSS VULNERABILITIES.
So kindly let me know what needs to be done (procedure)
Thanks in advance for the help,
Thanks&Regards,
Raj

Hi,
Please refer to ITS installation guide for patch installation process. Please note that these steps are for ITS 620.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b040d0f8-a9e9-2a10-5a9c-a25098f7e096
With Regards,
Saurabh

Component upgrade guide

Hi
We are planning for upgrade from 4.6c to ECC5. I'm not able to get the "component upgrade guide" from service.sap.com/instguides. Pls let me know the location of this document in sap website.
I'm looking for ECC6 upgrade document from 4.6c on HP-Unix with oracle database.
Take Care
Amarjit

Dear Amarjit,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you. .
Regards,
Rakesh

DDIC Activation error during SAP_HR component upgrade in ECC 6.0

Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,

Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G

ERP 6.0 component upgrade (NW + Fiori app)

Dear experts,
I’m trying to upgrade ERP system with Sum 1.0 SP11 Patch 2 & I’ve already updated tp, r3ta, r3trans, disp+work files in kernel.
Source System -> Target System (above red line everything is the same)
In execution phase I’ve got
sm37 is not helping much.
XPRASUPG.ELG (files also in attachment to post):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR740XPRA90000138.ER1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 054 Calling tp IMPND system: &2"ER1" umodes: &3"C9" options: &4"-Dr3up=1 skipxpra -Dmainimp_proc=1 -Dbuffreset=yes", requests&1" "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-XXX13INCTSPLGN 000" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-74018INCTSPLGN 000" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-S4016INCTSPLGN 000" " " " " " "
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
1AEPU320 See job log"RDDEXECL""19202100""ER1"
1 ETP111 exit code          : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I’m not sure which is report name here, when I enter E/CTSPLUG/CTS_PLG_MSG or IMPND I’ve got “Program E/CTSPLUG/CTS_PLG_MSG does not exist” and when I enter job name RDDEXECL it returns “Object documentation reset.” in message box.
In SAPR740XPRA90000138.ER1
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order    : "SAPK740XPRA90000138"
1 ETP102 system              : "ER1"
1 ETP108 tp path            : "C:\usr\sap\ER1\DVEBMGS04\exe\tp.EXE"
1 ETP109 version and release : "380.18.94" "741"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000138"
4 EPU111    on the application server: "VICTORIA4"
2 EPU122XPost-import method "/CTSPLUG/ACT_AFTER_IMP" started for "PLGD" "L", date and time: "20140822192049"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "CTS_SERVER_ACTIVATION_AI started" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "Input: tarclient is_upgrade: force_plg_import" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "Start of table e071" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000001R3TRPLGDSAP_CTS_BOOTSTRA" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000002R3TRPLGDSAP_CTS_SERVER" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000003R3TRPLGDSAP_CTS_SERVICE" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "End of table e071, start of table e071k" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "End of table e071k" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 040 Performing initial checks
A2 E/CTSPLUG/CTS_PLG_MSG 026 Starting check of R3trans
A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_BOOTSTRAPPER" was found: version "0000000013" timestamp "20130627154150" trkorr "SAPK-XXX13INCTSPLGN"
A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-XXX13INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 032 Starting checks of transport tool tp, options: "SKIPXPRA"
A2 E/CTSPLUG/CTS_PLG_MSG 039 Performing evaluation of plugins
A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_BOOTSTRAPPER" was found: version "0000000013" timestamp "20130627154150" trkorr "SAPK-XXX13INCTSPLGN"
A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_SERVICE" was found: version "0000000018" timestamp "20140724090939" trkorr "SAPK-74018INCTSPLGN"
A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_SERVER" was found: version "0000000016" timestamp "20140213121003" trkorr "SAPK-S4016INCTSPLGN"
A2 E/CTSPLUG/CTS_PLG_MSG 044 First delivered plugin is on position "1"
A2 E/CTSPLUG/CTS_PLG_MSG 016 Consistency "c" for plugin name "SAP_CTS_BOOTSTRAPPER" version "0000000013" timestamp "20130627154150"
A2 E/CTSPLUG/CTS_PLG_MSG 017 Plugin "SAP_CTS_BOOTSTRAPPER" entries in TADIR: "12", expected: "12"
A2 E/CTSPLUG/CTS_PLG_MSG 016 Consistency "i" for plugin name "SAP_CTS_SERVICE" version "0000000018" timestamp "20140724090939"
A2 E/CTSPLUG/CTS_PLG_MSG 017 Plugin "SAP_CTS_SERVICE" entries in TADIR: "142", expected: "142"
A2 E/CTSPLUG/CTS_PLG_MSG 045 First inconsistent plugin is on position "2"
A2 E/CTSPLUG/CTS_PLG_MSG 046 Remaining subset of plugins to be installed:
A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_BOOTSTRAPPER 0000000013SAP_BASIS" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_SERVICE 0000000018SAP_BASIS" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_SERVER 0000000016SAP_BASIS" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-XXX13INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-XXX13INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-XXX13INCTSPLGN" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-74018INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-74018INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-74018INCTSPLGN" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-S4016INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-S4016INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-S4016INCTSPLGN" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 054 Calling tp IMPND system: &2"ER1" umodes: &3"C9" options: &4"-Dr3up=1 skipxpra -Dmainimp_proc=1 -Dbuffreset=yes", requests&1" "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-XXX13INCTSPLGN 000" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-74018INCTSPLGN 000" " " " " " "
A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-S4016INCTSPLGN 000" " " " " " "
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
1AEPU320 See job log"RDDEXECL""19202100""ER1"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20140822194328"
1 ETP111 exit code          : "12"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED END OF XPRAS_AIMMRG =================================================
In SAPG-XXX13INCTSPLGN.ER1
1 ETP199 ######################################
4 EPU202X====MARK ANALYZED SECTION==== END OF XPRAS_AIMMRG ============ BEGIN OF XPRAS_AIMMRG ==============
1 ETP199X######################################
1 ETP156 GENERATION - SYNTAX CHECK - PACKAGE CHECK
1 ETP101 transport order    : "SAPK-XXX13INCTSPLGN"
1 ETP102 system              : "ER1"
1 ETP108 tp path            : "tp"
1 ETP109 version and release : "380.18.94" "741"
1 ETP198
1 EPU141 Generation of programs and screens for transport request "SAPK-XXX13INCTSPLGN"
4 EPU142      on application server "VICTORIA4"
1 EPU143 Only generates programs with LOAD versions
1 EPU145 Start on "22.08.14" at "19:37:13"
1 EPU144 -------------------------------------------------------------------------
2 EPU146XGeneration of the transported programs
2 EPU144 -------------------------------------------------------------------------
3 EPU165 Program "SAPLSCXP" successfully generated
4 EPU153 Database COMMIT executed
3WEPU156 Program "SAPLTMSSCXP" does not exist
3WEPU156 Program "SAPLTMS_SCXP" does not exist
2 EPU144 -------------------------------------------------------------------------
2 EPU147XGeneration of the users of the transported Includes
2 EPU144 -------------------------------------------------------------------------
2 EPU144 -------------------------------------------------------------------------
1 EPU149 Ended on "22.08.14" at "19:37:26"
1 EPU150 No. of programs /Min/Avg/Max (sec): "1" "3" "3" "3"
1 EPU144 -------------------------------------------------------------------------
4 EPU153 Database COMMIT executed
1 ETP156 GENERATION - SYNTAX CHECK - PACKAGE CHECK
1 ETP110 end date and time : "20140822193726"
1 ETP111 exit code          : "4"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED END OF XPRAS_AIMMRG =================================================
I found that also in SAPG-S4016INCTSPLGN.ER1 two programs does not exist
3WEPU156 Program "IF_CTS_API_TRANSPORT_COLLECTIOIP" does not exist
3WEPU156 Program "IF_CTS_API_TRANSPORT_REQUEST==IP" does not exist
Could someone tell me what those programs was supposed to do?
Thanks in advance
Ireneusz Kozłowski

Dear Ireneusz,
please understand that such workaround - skipping the installation of a package - is not supported by SAP Support.
The log you mentioned had warnings only, not errors. The real problem can be seen here:
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
1AEPU320 See job log"RDDEXECL""19202100""ER1"
You have to check the job RDDEXECL details in SM37 to find the work process it was run on; then you should go to ST11 and check the corresponding dev_w* file to find the root cause of this issue.
I'm posting this reply for the community to be aware that skipping errors during XPRAS - or any other upgrade phase - is not the solution.
Best regards,
Tomas Black

Shared component upgrade

Hi all,
We have 2 JES2005Q1 Access Managers (in session failover mode).
We want to update the plataforms to the latest patch level, but maintaining the actual product version (JES2005Q1)
Can we safely install the latest JES ES Component Patch Cluster on this platforms ? If yes, will we upgrade the shared components by doing this installation? To what level? JES2005Q4 Shared Components ?
Thanks in advance.
Regards,
Rui Monteiro

The "Java ES Component Patch" clusters available on Sunsolve are meant to be
used by Java ES 2 (2004Q2) and Java ES 3 (2005Q1) users that are upgrading to
Java ES 4 (2005Q4). It essentially upgrades the shared components to the
Java ES 4 (2005Q4) level (and adds a couple new ones in the "genesis" patches).
I think you want to get the "latest patches for JES 3". Unfortunately there is no
simple way to do that (there is with JES 5 where accumulated patch clusters are
now available). My recommendation would be to install the latest recommended
Solaris patch cluster (this may end up patching a few JES shared components
since they are bundled with Solaris as well). You'll then have to search for patch updates for the particular product versions you use (AppServer, AccessManager, etc).
Applying the "Java ES Component Patch" cluster to a JES 3 system and not
upgrading to JES4 may work -- but I'm not sure how much that scenario was tested
so I hesitate to recommend it.
Joe

QT7 and MPEG2 playback component - upgrade or purchase?

I upgraded to QT 7 but now I can't play back MPEG2. Is there an upgrade for the MPEG2 playback component or do I have to purchase a new copy?

If you moved up from version 6 then yes and you can get a free upgrade.
Log in at the Apple Store using the same account ID as your original purchase and click the downloadable software purchase link to see.

SAP HR component upgrade

Hi Friends,
We have SAP_HR 600 SP18 level 58 and same EA_HR.
We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
Please send the link from where we can download the same.
Regards
Ganesh Datt Tiwari

> We have SAP_HR 600 SP18 level 58 and same EA_HR.
> We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
> Please send the link from where we can download the same.
Components of 602 are Enhancement packs which has to be downloaded and confirmed through Solution Manager. They are no more directly downloadable from the SMP.
Markus

BW and SEM Compatibility in upgrades

Hello all,
We currently have BW 3.0B (BD) and a separate SEM system 3.1 (ED) on a separate system. Data is stored in transactional cubes on the BW environment (BD) and there is an RFC link between the two when planning and saving data occurs.
We plan to upgrade our BW system (BD) to 2004s this year but in the first instance we are just going to do so like for like, and to continue with the old functionality where possible, apart from engaging the BI Accelerator for performance reasons. For various reasons at this stage we do not wish to upgrade our SEM system (ED) or bring it into IP/BPS in the BW system and my question is whether or not we will still be able to converse between the systems in the way that we currently do?
Any thoughts would be gratefully received.

Hello Nick,
SAP BW is Data Warehouse Whereas SAP SEM is used for Planning and Budgeting so If you can source the Planning Data from anywhere else than SAP BW then <b>yes you can use SAP SEM without SAP BW</b> This answers your second questions as well.
I think Data in SEM can be loaded directly as well Planned as well as actual But without any Datawarehouse I don't think it will be that beneficial and effective system.
Hope this helps.
San.

SRM 7.0 / NW 7.01 SR1 upgrade SP levels - Note 819722

Hi,
I'm preparing for an upgrade to SRM 7.0 / NW 7.01 SR1, and I want to include the latest SP Stack. I need to know what SP level the upgrade delivers, so I can download just the delta SP Stacks rather than all of them.
The upgrade guide states that Note 819722 should contain the information on what SP levels the upgrade delivers, but this Note comes up with the message:
"The requested SAP Note is either in reworking or is released internally only"
Does anyone have a recent copy of the note downloaded, or able to provide the information? I really want to avoid downloading 7 Stacks if I only need 2...
Thanks!

Thanks for rephrasing your question. It prompted me to fare better this time:
Kernel and ABAP Support Packages contained in SAP SRM 7.0 Support Release 1:
===============================================================
SAP_BASIS 701 03
SAP_ABA 701 03
SAP_BW 701 03
PI_BASIS 701 03
SAP_BS_FND 701 02
SAP_AP 700 15
SRM_SERVER 700 02
SRM_PLUS 700 02
SRM_EXT 700 02
SRM_EXPL 700 02
ST-PI 2008_1_700 00

SEM-CPM component for BI

Hi,
We are installing BI 7 and trying to work with Balanced ScoreCard. I did try t-code UMB_PRES1, and the system response was
Transaction UMB_PRES1 does not exist
Message no. S#343
Is it because we haven't install a component??? what component is that??
Is there another reazon???
thanks for the help.
Mauricio

Hi,
In SEM = Strategic Enterprise Management
These are part of SEM:
Business Consolidation (SEM-BCS)
Business Planning and Simulation (SEM-BPS)
Corporate Performance Monitor (SEM-CPM)
Business Information Collection (SEM-BIC)
I think transaction UMB_PRES1 for balance card belongs to SEM-CPM and you need to install add on for the same.
Also check this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
http://help.sap.com/saphelp_sem60/helpdata/en/36/c670373bbf0303e10000009b38f842/content.htm
SEM Transaction Codes
Hope this helps.........
Rgs,
Ravikanth.

Usage task type, task component and task level and service number in time s

Hi guru,
when I compile time sheet, I want to fill field task type, task component, task level, sender purchase porder, PO item e service number but the system give me an error, LR105, "service does not exist". I uderstand that this error is caused from missing record inderivationor task component but I work on more services.
Is there anyway to set in this derivation all the services or a range of services?
Thanks
Regards

not answered

SEM-BW component Upgrade to Level 4

Similar Messages

Maybe you are looking for