SEM-CPM: Autorizations for cockpit

Hi friends.
I have installed a SEM CPM for a client but I have a question: how can I conceed autorizations for a cokpit for some users?
Thanks!

You need to add the transaction to the cockpit in BW and than you need to make sure that the users are authorized to the authorization objects that are applied in the query that run in the cockpit.
I hope this help.
Antonino

Similar Messages

SEM-CPM component for BI

Hi,
We are installing BI 7 and trying to work with Balanced ScoreCard. I did try t-code UMB_PRES1, and the system response was
Transaction UMB_PRES1 does not exist
Message no. S#343
Is it because we haven't install a component??? what component is that??
Is there another reazon???
thanks for the help.
Mauricio

Hi,
In SEM = Strategic Enterprise Management
These are part of SEM:
Business Consolidation (SEM-BCS)
Business Planning and Simulation (SEM-BPS)
Corporate Performance Monitor (SEM-CPM)
Business Information Collection (SEM-BIC)
I think transaction UMB_PRES1 for balance card belongs to SEM-CPM and you need to install add on for the same.
Also check this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
http://help.sap.com/saphelp_sem60/helpdata/en/36/c670373bbf0303e10000009b38f842/content.htm
SEM Transaction Codes
Hope this helps.........
Rgs,
Ravikanth.

CPM variable for cockpit

We have a cockpit defined in SEM which displays KPIs by calendar day. There is a CPM variable displayed when entering the cockpit which accepts the day, it is a drop down box. Walls, views and frames are then displayed based in queries in BW. The dates in the dropdown reflect the posted values from the BW cubes. One of the KPIs is obtained from a multiprovider (MP) in BW. When the query from the MP is used in a frame an excessive amount of dates are displayed in the dropdown. The dates displayed are not in any cubes. This also causes the cockpit to respond extremely slow. When the MP query is not connected to the cockpit performance is acceptable and the date selection reflects the cube contents.
We would also like to default the date selection to yesterday's date, but that is another issue.

Richard,
I have not tested it but try to go to transaction RSRHIERARCHYVIRT and change the time interval (to less dates).
Regards
Marc
SAP NetWeaver RIG

Web Cockpit developent (SEM-CPM or VC or something else)

This question is intended for SAP Development team or Product management team. We are looking to make a strategic decision about the tool set to build BI Cockpit on the Web.
SAP has competing technologies, which can deliver the cockpit on the web and as a customer we need to make a choice that is right for at least next 3-5 years. We do not want to develop the cockpit using the technology that is not moving ahead with SAP development.
Our current environment: BW 3.5, EP 5.0 system. Plan to upgrade EP 6.0 in next 3 month.
As per my understanding, following are the tools that can be used for development of web cockpit.
1) Web Application Designer with or without any Java scripting.
2) SEM-CPM (Corporate Performance Monitor).
3) BSP (Business Server Pages) /HTMLB -
4) Visual Composer with EP.
Customers business team has seen SEM-CPM and inclined to use that. As a IT team we want to choice the right tool set.
Following are my questions:
1) SEM-CPM: Does it have good foot print at SAP Customer base? Is it good tool to develop the Cockpits as primary tool set? Is SAP developing this technology in the future? I have not seen any updated white paper or documentations in service.sap.com after 2003.
OR
2) Visual composer is the right tool. Visual composer allows the BW and Non BW Data presentation. For our purpose, all data will be in BW and BW queries will be the only source for the cockpit.
As IT team, we want to avoid using Java Script or other programming process because of the support & maintenance issues involve.
Please help and provide comment or suggestions.

Hi,
SEM-CPM is not a very flexible tool. We have to live with its limitations. We cannot customise to suit client needs. There are limitations in chart types also. If customer uses excel based charts for metrics currently, check whether they are possible thro' CPM. Please also check the latest version of SEM-CPM.
I would request to considering other alternatives as suggested ike Web cockpit based on Web Application Designer with or without any Java scripting.likes or BSP (Business Server Pages) /HTMLB or VC (not worked on this).
reg,

SEM CPM - Management Cockpit

Hi Guys,
Currently we are working on creating SEM CPM management cockpit and the requirement is as follows,
1.we need to diplay one of the query result directly in the dashboard.(without any graph)
2.We need to create a table display with 3/4 KPI's which belong to different query(for the last 3 months). eg
     Month1 Month2 Month3
KPI1        x                 x              x
KPI2       x                 x              x
KPI3        x                 x              x
It would be great if you could help us on the same.
Thanks,
Suthakar M

Hello Ashok,
In my opinion, this tool cannot be used in Business Objects.
Our [end user documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] does not have any comment. I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

SAP - SEM-CPM (cockpit)

Hi all,
I have implemmented a SEM-CPM system in my company, what ussually was done in a 25 queries, now is done in a cockpit, but it lasts too much (around 8hours), and every user that wants to access to it, has to wait this time. Is there any way to keep these results for different users and sessions?
I know that it can be calculated evry logic view independiently, but I would like to execute every one at the same time, and keep this data for different ussers and sessions, so they can navigate throught a past calculation of results, and refresh these results as wanted. Is this posible?

Someone has suggested me "information Broadcasting".
But Information broadcasting is typically used to publish and persist reports for multiple users. Can this also be applied to SEM-CPM's results for the frames?
PLease, help me, it is quite important.
Thanks in Advance.

SEM CPM Management Cockpit in Business Object

Hi,
Can the Cockpit used in SEM-CPM module can be created using Business Objects?.
if so, is there any documents or links which can give an idea?. I got an initial response from BO General forum that it cannot be done, but i would appreciate if this gets answered from this forum as well.
Please let me know.
Regards,
Ashok v

Hello Ashok,
In my opinion, this tool cannot be used in Business Objects.
Our [end user documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] does not have any comment. I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

SEM-CPM Execute a new Cockpit

Hi Gurus,
Im new one in SEM-CPM, i have created a new cockpit without any issue, but after i released and assigned into the hierarchie , How can i Execute it ?
Regards

I resolved by my own.

Integrating VDT with Managment Cockpit in SEM - CPM

Hi ,
I am working with Managment cockpit in SEM-CPM. I want to integrate my Value Driver Tree ( VDT ) to my Managment cockpit. Can anybody tell me the procedure of the same.
Thanks & Regards,
MANDAR

hi mander,
follow this link.
https://help.sap.com/saphelp_sem320bw/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
look out at the cpm-vdt node of this link.hope it will provide you the information you need.

Frame texts view via web in SAP SEM-CPM-MC

Hi
I have an error message when use the UMM_PRES_WEB transaction for Management Cockpit (BW-SEM-CPM-MC): there are hieroglyphs in frame title instead of normal cyrillic when i'm trying to view some frames via WEB in russian language, or when i'm using english language i see normal text but it does't have right format. Another texts view correct even in cyrillic.
Version of system: SAP_BW 700 0016

Hi
I have an error message when use the UMM_PRES_WEB transaction for Management Cockpit (BW-SEM-CPM-MC): there are hieroglyphs in frame title instead of normal cyrillic when i'm trying to view some frames via WEB in russian language, or when i'm using english language i see normal text but it does't have right format. Another texts view correct even in cyrillic.
Version of system: SAP_BW 700 0016

SEM-CPM Activating Strategy Template

Hello All
After activating a Strategy Template in SEM-CPM version 6 transaction UMB_ST_VIEW when viewing the result in the Measure Catalog I have greyed out Business Content Measures showing they are active but the activated measures do not beolong to a measure catalog. The system wont allow me to assign them to my own personal catalog and I cannot deactivate them to allow drag and drop. Can anyone please help me with this problem.
Thanks
Phillip

hi
Balanced Score Card has to be configured as follows:
First You have to Define Strategy
For Example Strategy : Revenue Growth
For this particular strategy u can have 4 perspectives
1. Financial Perspective
2. Customers Perspective
3. Internal Process
4. Learning & Growth
For Financial Perspective: You can have different Objectivees
eg for objectives:1. New Revenue Sources
2. Increase Profitablilty thru Premium Brands
Next For each objective u can have measures and initiatives
For eg: for increase Profitablity thru Premium Brands
Measures: Profit, Revenues
Initiatives: Allocate Budget For Advertisement , Promotinal Activity etc.
So Overall the sequence will be First : Strategy
and For Each Strategy u will have different Perspectives and for each perspective different objectives and for each objectives u will assign different measures and initiatives.
Objective will pertain to repective perspective only.
For each initiative u hv to assign respective incharge and budget to be alloted.
Next u hv to create value fields and assign Actual, Plan and Target values
For score calculation u need to define Formula: and select the formula id for eg: a/b
and give a=actual and b=plan then u hv to assign table
next u hv to select graphics also
then u sav ur BSC.
if u hv still hav any queries u can contact
tx
srin
tx
srin

Connect more than 1 external BI in SEM-CPM-BSC or SEM-CPM-MC

Hello,
I have seen the help.sap.com that helps me how to put a defined BI (but only one BI).
Design -> Default BW System
Design -> Access to SAP BW
Design -> RFC Destination for Project System
But what we have is 3 BI systems. Each one with one module (HHRR, FI, SD). We want to join those BI modules into the SEM CPM. But I don't see how to put those 3 external BI in my CPM.
Please help me...
Best Regards...
Pablo Mortera.

There're several ways:
1.- Create remote Cubes where you get your queries. Then once the SEM system you will have a Cube that really is a "remote" cube in another system. This will also help by creating a MultiCube, related to the cubes created before...this way you have a big datamart (really a knowledge mart;-) ) that has all of the data/information related in one view.
2.- In the local BW system, you may create local InfoProviders that are being fed by remote BW systems as InfoSources. (You'll have to create the InfoSources and copy the data loads in the local BW System)
Hope this helps.
Cheers.
Jesus

SEM CPM

Hi,
I am new to SEM. I tried to search the forum for some documentation. Everyone referred to help.sap.com and service.sap.com/sem. In service.sap.com/sem I didn't find any documents for sem documentation. Help.sap.com doesn't have any examples.
My first task on SEM CPM is to create dashboards.
What is the best approach to learn CPM ?
Thanks,
GSM.

Hi GSM,
Refer the links below
http://help.sap.com/saphelp_sem40bw/helpdata/en/1f/3131375fc9342ae10000009b38f839/frameset.htm
https://websmp203.sap-ag.de/sem -->
In Strategic Enterprise Management node --> Media Library --> Presentations --> SEM CPM (and also Literature section)
Hope it helps,
Sree

SEM-CPM-MC: Creating CPM variables

Hi,
I know this is probably not the right place to post it, but I couldnt find a better place.
I trying to create a variable in SEM-CPM-MC, but no matter what I do, I'm only able to create a runtime variable with selection type P - Variable for single value. I can select the other values, but when I save the variable SAP automatically corrects it to Singe value again. I can also create a design variable with the other types, but not a runtime variable. How do I create a variable for which you can enter an interval?
In the documentation it also says, that you should be able to create variables on a frame level. I don't see any button where I can create a variable on a frame level. I've done exactly as it says on help.sap.com, but I don't have a button to create a new variable on a frame level. How do I do that?
Any help is appreciated and will be rewarded generously :o)
Thanks,
-J

hi Yaj,
yes, there are business content, sap measure catalog, measures, strategy tempates, bw infocubes, etc.
you can activate single or mass, go to sap measure catalog, e.g you can activate node 'financial measures' for mass activation or specific measure only under that catalog.
to activate infocubes etc, you can use rsa1(administrator workbench)->business content, detail steps see sap help
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
CPM business content, see
http://help.sap.com/saphelp_erp2005/helpdata/en/7a/72663ca0a9272ae10000000a11405a/frameset.htm
hope this helps.

SEM-CPM- Strategy Creation

Hi Friends,
I work in SEM 6.0 environment and i am trying to create a strategy in SEM-CPM in transaction UMB_ST_NAV,once i enter the screen none of the icon or radio buttons work ..it doesnt allow me to create the strategy nor the exit icon takes me out of the screen. Has anyone encountered it earlier. Pls post your views.
Thanks and Regards,
Ram

Hi,
I don't know if the solution is as easy for you but :
I did have the same problem with my frames... the problem was that (in the web version) after having selected a value, I had to click on the "V" on the bottom-right of the screen to update the graph according to my selection.
I hope it helps.

SEM-CPM: Autorizations for cockpit

Similar Messages

Maybe you are looking for